No power when IDE cable plug into mainboard
The motherboard I'm working with is a K7 Pro ATX IR3 Mainboard. Whenever I plug in the IDE cable to the mainboard, it seemed that there is no power coming from the power supply. I tried this with a cd-rom and the light isn't lit or do anything. As soon as I unplug the IDE cable from the mainboard, the CD-ROM works...meaning I can push the button for open and close. All the lights, HD and Power lights, on the front of the case are not even flashing or turn on.
If anyone has any suggestion I'm greatly appreciated.
ljCharlie
?(
Sorry for the confusion. In this situation when I talked about cable, I mean the IDE cable or floppy cable and not the power supply cable. I have one floppy, cd-rom drive, hard drive, sound card, and a video card. I believed the power supply is a 400 watt, although I'm sure. I just purchased this last week so I am pretty it'll handle what I am trying to do. When I turn the computer on these are the things I believed that are running with all three cables one end plugged into the mainboard and the other end to the devices such floppy, hard drive, and cd-rom.
cpu
cpu fan
case fan
D-LED light is on
Devices that are not runing with all three cables plugged in to the mainboard and the other end to the devices such floppy, hard drive, and cd-rom.
floppy drive
cd-rom drive
hard drive
HD LED light
Power LED light
Now, if I unplug all the cables from the mainboard or from the devices then all the devices seem to have power coming to it.
ljCharlie
Similar Messages
-
My sister gave me her 1st gen iPad to see if I could solve an issue. It won't turn on, and when it's plugged into a power cord there is a slow pulsing sort of flash that happens on the screen....any ideas?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe! Now see if it charges normally and after a period try to turn it on again. If the batter has been drained it could take 20 minutes or so for it to show that it is charging.
Also considering if the battery need replacing! -
I inherited a 2003 ipod from my daughter. The controls will not work when it is plugged into a power source. Can anyone help?
But they work normally when not plugged in? What kind of power source are you plugging it into? It maybe outputting more than what the iPod can handle. I had this happen to an iPod I plugged into a powerstrip that was plugged into the cigarette lighter in a vehicle an experienced the same thing.
B-rock -
It says not charging when it is plugged into my mac desktop
My Ipad 2 says not charging when it is plugged into my computer and it does not show up on the side bar in the itunes app.
It is possible that the USB port is not working properly as well. This support article might be of help.
http://support.apple.com/kb/ts1591
Sometimes all it takes is a restart - quit iTunes, restart your Mac and restart your iPad and see if that helps at all.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
My iPad is not recognized by Finder or iTunes when it is plugged into the computer. i ran the Restore sequence and got an error message stating "The iPad could not be restored. An unknown error occurred (1611). Can this be fixed?
iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125 -
Itunes will not recognize my ipod nano when it is plugged into the computed
itunes will not recognize my ipod nano when it is plugged into the computed
Check this post: https://discussions.apple.com/message/6985613#6985613
-
I have always been able to create playlists on itunes, then drag them to my ipod when it is plugged into the mac. I recently downloaded the latest version of itunes, and now am unable to do that. I can drag songs and albums to the ipod, but not my playlists. It used to be so easy, am I missing something here?
Plug your iPod into your computer, it will begin to sync. Now check to see if the playlists have been added.
If not, go to the songs tab under your iPod when it is connected to iTunes, Unless you have checked "Sync all songs (or something to those words)" you should have an option on what you can put on your iPod. Make sure to check the playlists that you want on your iPod. -
I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.
I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. -
My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?
Sounds like the battery is shot and in need of a replacement. You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
Not much else you can do for troubleshooting this one.
B-rock -
I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.
I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.
-
When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.
http://support.apple.com/kb/HT1808
Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have. -
Im trying to update my iphone 5s to ios 7.1 but it just keeps sending me an error message even when i am plugged into itunes
The exact wording of Error messages and Alerts are imperative in ascertaining your issue.
Clearly state the Troubleshooting Steps you have tried to Resolve it -
HT4236 I can't see any photos when ipad is plugged into computer.
I can't see any photos in itunes when ipad is plugged into computer.
Everything else shows up.I have a similar problem Win 8 iCloud 3. Shared photostreams sync ok and my photostream syncs on other devices. Interesting enough, when I access photostream through the "my computer" option on Apple TV I see a whack of pictures that don't appear on any of my IOS or Windows Photostreams.
-
Does the New Imac 21" works as an external display using thunderbolt to thunderbolt cable plugged into a MacBook Pro?
Hi there LDIMERY,
You may find the troubleshooting steps in the article below helpful.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
-Griff W. -
When iphone 5s plugged into my macbook it charges but isnt recognized
when iphone 5s plugged into my macbook it charges but isnt recognized in itunes or iexplorer. Both my ipads connect no problem, not the iphone though?
If your computer is running Windows, go to Control Panel > Administrative Tools > Services. Check to see if "Apple Mobile Device" Service is Started. If not right click on this service and select Start. Also make sure Startup type is set to Automatic. If not, right click on this service, select Properties and set it to Automatic.
Maybe you are looking for
-
I have a E63 and I have been using using the record function to record information for a project I am doing and untill now have had no problems, after deleting one of the clips in the "Gallery/soundclips folder that was no longer needed , I now fi
-
Substitution variable-can't set
Hi, We have one user who have access in 4 (3 essbase/1 planning) database in different applications. We have many other cubes/applications in which that user have no access. We are using one substitution variable in calc, report etc which is using in
-
10.6.4 Security Update 2010-05 and Flash Disk Problem
New Mac and System 10.6.4-- Software update notified me of Security Update 2010-05, and I downloaded yesterday without remembering I had a flask disk in 1 of 4 USB ports, using it to organize data when the hard disk on my older IMac (3 years) crashed
-
Removal of apps which was installed with a different iTunes account
Hi there, I recently had to restore my phone from a iCloud backup. The backup contained apps which was installed by a different iTunes user. The phone keeps prompting me for the password and I don't know the password, I want to remove those apps from
-
Why is iPhone 5c crashing after 7.1 update?
I updated to 7.1 this evening and since then the phone is randomly crashing. Apple logo comes up for a few seconds and then back to the home screen. Its crashed at least 5 times in the last 10 mins. Is there a way to go back to the previous software