No print codebar with Acrobat for HP-UX

Hi,
In my company we are installed Acrobat Reader 5.0 in HP-UX and we are generated the reports with Oracle Aplications. Some reports are generated and printed in PDF with the instruccion: cat fichero.pdf |acroread -toPostScript| lp -D printer and no problem, but now we add in some reports a codebar field but the Acrobat no generated the codebar only generated a number. Wich is the problem? We need any fonts codebar?
Thank for your help

Hi,
Barcodes are currently not supported on the Unix platforms. We are working to support them in the next release (8.0).
The latest version of the Reader on HP-UX is 7.0.9. You might want to upgrade to it (requires >= GTK+ 2.0) (However, it too does not support barcodes. There are several other enhancements.)
Ashutosh

Similar Messages

Dot matrix printer will not print well with acrobat reader 8 and 9.

I have the dot matrix printer IBM Proprinter XLIII, with Acrobat Reader 7 pdf prints correctly, but with Adobe Acrobat Reader 8 and 9 print badly.
Someone I can 'help?

I updated the drivers with a new version, but continues to print badly with acrobat reader 8 and 9 (the text is not readable)
If printed with Acrobat Reader 7 print is ok.

Problem printing PDF with Acrobat Pro 9.4.4

Hi!
I can't correctly print a PDF with Acrobat Pro that was created in Indesign CS5.
I want to print it on a letter format (8,5 X 11") and it offers me a format of 8,49 X 10,99". It results in having my document being printed as tile with it's original format 12 X 21,5" as if I didn't adjust the format to be reduced.
I temporary used Preview to print my PDF, but now I can't as the encoding in which I received the PDF used to be "Creo Normalizer JTP" and now it is "Adobe PDF Library 9.9"
If anyone can help!
This is my first time here, thanks in advance for your help

Here's what it looks like (I work in french, hope you can understand)
I just updated my software, thanks for that!
Now, my problem is still on... I still have the very same result when I print. I did selected the correct Page Scalling I needed. I did selected the paper size I wanted. I chose Shrink to Printable Area and I tried with Fit to Printable Area.
Since I've had this problem the size appears as : 8,49 X 10,99 (Instead of 8,5 X 11). I tried with Legal (8,5 X 14) but it appears as 8,49 X 13,99. I went through the preferences, but I can't find anything that could be the problem.
Any other idea?
Thanks!!
Also, Preview was very helpful, as it did print my PDF correctly! I understand it's not the best... but it did the job

Calibri font not printing - created with Acrobat XI pro 11.0.4 in Word 2007

Hi, we recently upgraded to Adobe Acrobat XI pro (11.0.4) and when we create a PDF in Word using the Calibri fonts, it doesn't print when using Adobe Reader X.
Prints ok when using Quark or other software, just not working with Office.

Thanks for your answer.
We are in a controlled office environment and unfortunately we cannot receive updates due to company policies. We have to wait until they do another "package" with an upgraded version.
It's printing ok with Adobe Reader XI, but not Reader X (which is our actual default Reader). And again they cannot install Reader XI to all (only me since I'm a graphic designer, I have admin rights). We tried on other printers, not working too. Font is embeded too. It's working when using another PDF maker (like we have PDF X Change, it's working). Was working also with our previous Acrobat X Pro.

Right clicking PDF files and printing those with Acrobat Reader X

We have a Windows XP computer with Adobe Acrobat 7 Professional and Acorbat Reader X.
Now when we open PDF files they open with Acrobat Reader X wich is fine.
But when we try selecting PDF files and right click Print them they print with Acrobat 7 Professional.
The problem is with Adobe Acrobat Professional 7 it doesn't print all the files we selected.
We select 50 files and only about 10 are printed and those are always random.
So is there anyway to enable the print option to print with Acrobat Reader X ?

This is not a desirable situation. Adobe recommends against having Reader and Acrobat on the same machine, unless they're both version X, exactly because it can cause this kind of conflicts.

Print comments with Acrobat Pro

I want to print comments using Acrobat Pro on one shhet rather than sequenced on seperate pages. How can I do this?

Anybody?

Printing PDF with Acrobat 9.0 for CS4 and Mac OSx10.6.2 not working properly.

I downloaded the CS4 for MAC Trial before purchasing. I work on a MacBook Pro OSx10.6.2. The download and installation was successful.
However, upon launching the Adobe Acrobat 9.0 software, I received the following message: "REPAIR SETUP: Acrobat has detected that there are missing components that require repair. Select the optional components you would like to repair and click continue." My choices were: 1) Adobe PDF Printer, and 2) Adobe PDF View Safari Plugin. I chose Continue. When I am in another program (like Quark 7.5), and try to Print to the Adobe 9.0 Printer, the document spools, as if printing, but I do not get prompted to save the PDF anywhere, and when it is done "printing" there is not a document saved anywhere. It appears to be getting stuck in the distilled, although I don't really know. I tried un-installing the entire CS4 software and re-installing and had the same exact thing happen again. Can anyone help?

Do as I do on some items. Install a utility called TypeIt4Me the go to the announcement. Copy the link. choose add clipping give it a name put / or \ at the end so it you type the same words normally it don't trigger the typeIt4Me entry. then when you need to type the words (code used) and wait for TypeIt4Me enter it. the item highlighted in my attachment is this:
http://indesignsecrets.com/acrobats-adobe-pdf-printer-replaced-in-snow-leopard.php
which is the link to the InDesign article about snow leopard and creating Adobe quality PDF's

Printing Problems with Acrobat Pro 9.5 for Mac

I have Acrobat pro 9.5 for Mac. I'm using a Canon MG8150 multi-function printer. Everytime I try to print from Arobat Pro I get an error message. Any suggestions? I can print my pdfs from Apple Preview; so it's not the document or the printer.

The first problem is probably a permissions issue. Run Repair Permissions from the Disk Utility. For the second see this
Announcement: Known Acrobat Issues under Snow Leopard
Hide Details
(1) The Adobe PDF Printer module does not work under OS X.6. Please see http://kb2.adobe.com/cps/509/cpsid_50981.html to find out how to create Adobe Quality PDFs under Snow Leopard.
(2) Opening files from the finder, including files authored by Adobe applications, may not open them in the original authoring application. Omitting a file extension from the file name will increase the likelihood of this happening. See http://kb2.adobe.com/cps/511/cpsid_51110.html for more information.
by MichaelKazlow at Aug 30, 2009 2:10 PM

Printing proble with Acrobat 11.0.02 for mac

While printing I get 'unable to convert to postscript file'

Hi,
I'm sorry if you experience performance issues and understand it can be frustrating.
Can you help us help you:
- What system are you running?
- What does performance problems mean? Is Acrobat still responsive? How responsive is the user interface? Navigating through pages, etc?
We'll do our best to ensure the situation can be solved and you can enjoy using Acrobat on your computer.
Thank you,
Luc

Printing problem with Acrobat V.10.1.12

I recently had to complete a mail merge type exercise to create labels and supply print ready PDF to commercial printer. The complete document was 3,334 pages. When I went to print the PDF printer seemed to be going through all the motions, but at the end, would only produce page 1 of this document. Is there something I can do to correct this?

Thanks for responding I was using an MS Excel spreadsheet to merge details to produce labels in a programme called NiceLabel Pro. The information from the spreadsheet was very simple - a readable code number and a QR code. In the Nice Label document setup you nominate the printer - in my case this was the Adobe PDF printer - to produce a Press Ready quality PDF file. I tried several times to print this file and each time ended up with page 1. As the job was urgent and I had a deadline to meet, I ended up installing a programme called Nitro - which also produces PDF - to complete the job, without a problem. However, I would prefer to stick with my Adobe Acrobat software as the other alternative is limited in its pre-press options. Hope this information will enable a solution to the problem.
- Thanks, Lynne
Hi again Dov - have you been able to come up with an answer to my Acrobat problem. Would like to begin 2015 with workable Acrobat.
Many thanks - Lynne

Printing problem with Acrobat Pro 10.1

I get an "Insufficient memory" message on my LaserJet printer when trying to print certain PDFs using Acrobat Pro 10.1, but the PDFs are printed without any problem from Acrobat Pro 9 or Preview. Does anybody else have this problem?

Thanks for responding I was using an MS Excel spreadsheet to merge details to produce labels in a programme called NiceLabel Pro. The information from the spreadsheet was very simple - a readable code number and a QR code. In the Nice Label document setup you nominate the printer - in my case this was the Adobe PDF printer - to produce a Press Ready quality PDF file. I tried several times to print this file and each time ended up with page 1. As the job was urgent and I had a deadline to meet, I ended up installing a programme called Nitro - which also produces PDF - to complete the job, without a problem. However, I would prefer to stick with my Adobe Acrobat software as the other alternative is limited in its pre-press options. Hope this information will enable a solution to the problem.
- Thanks, Lynne
Hi again Dov - have you been able to come up with an answer to my Acrobat problem. Would like to begin 2015 with workable Acrobat.
Many thanks - Lynne

Printing Problems with Acrobat 9.5.1?

I recently installed the update - Acrobat Pro 9.5.1 (Mac). Now I am having problems printing pdf files.
I re-installed printer drivers and printer software a couple of times. Got a file to print this morning and now nothing will print again.
These upgrades are more trouble than they are worth. What a waste of my time and time is money when you run your own business.
I've found no help online for this issue.
Printer - Epson Stylus Photo R1800
imac 27 inch running Mac OS X 10.6.8
Adobe CS5
Ramona

The printer.
iPhoto is still active and I can do other things with it. The job has been sent tothe printer so I guess it's the printer where the problme lies, or the communication between the Mac and the printer (which is wireless, though that shouldn't make a difference).

Printing problems with acrobat and Mavericks

We just got a new Mac Mini to replace an old iMac to drive our printers. We normally print from Acrobat Pro 9 ( 10.6.8 & 10.8.5 ) and have no problems. We migrated everything over to the Mini, which is running Mavericks, and now when we print a 2 page document the 2nd page is printing 180 degrees turned around. Printed the same file from another Mac with no problems. I've heard that Mavericks will only run Acrobat Pro XI. This is insane, that's like $450! Could it be a driver or something simple that I can't see for the life of me? BTW, this Mini will be running 10 printers at once, the old one did it.

Have you reset the printing system…
http://support.apple.com/kb/PH14141
Does Preview do any better? That will indicate if it's the printer driver or something in the application's printing system.
It would be worth checking that the printer drivers are up to date - a migrated driver may not be appropriate for 10.9.

Print problem with Acrobat XI

Hi,
After implementation of Acrobat XI my company is experiencing problems with pdf files failing to print on some printers.
The problem occurs for these specific printer types (reported so far): OCE 6522C, OCE CS 250, Canon iR-ADV C5045/5051.
The common problem is that when the pdf is printed (Reader XI standalone or as IE plugin or Acrobat XI professional) it looks normal and we get the normal confirmation that the print job was successfully sent to printer. However, in all cases the job never goes into the printer queue but gets deleted without a trace.
The problem is only present for PDF files created using Acrobat Distiller XI and printed with Reader/Acrobat XI. All pdf files created with Distiller versions pre XI, print fine on all printers.
The problem is present regardless of which user creates the pdf and who tries to print (as long as Acrobat XI is used.)
If we create pdf using the utility "PDF creator" from pdfforge, the printing works perfect from both Reader and Acrobat XI.
If we print pdf files generated by Distiller XI with "PDF Architect" from pdfforge, the printing still works perfect.
It seems to us that a change in either Distiller XI and/or Reader/Acrobat XI is causing the printers to skip/delete the job??
We cannot easily ensure that all printer drivers are updated, as this is a large company with several thousand enployees in many different offices around the world.
Some system details:
OS: Win 7/Serv. pack 1/64-bit
Reader v. XI, 11.0.2
Adobe Distiller professional XI, 11.0.0136
Distiller settings: Profile: "High Quality Print", Security: none, Comaptibility: Acrobat 5.0 (Pdf 1.4), All fonts embeded
Printer driver used for generating ps: Adobe PDF (Adobe PDF converter)

Hi,
I have the exact same problem. I have noticed that the screen asking for the serial number is on my OS language (Danish). If I deactivate photoshop and activate again the same screen is in English and allows me to login and register the license with no problems. Only when printing with the Adobe PDF printer I get the problem!!
Anyone?

Printing issue with pdftops for XML publisher reports.

Hi All,
We have recently upgraded from 11.5.10 to R12.1.3.
We are facing a strange issue for some of the seeded reports that were converted to type XML after R12 upgrade.
First, the reports were printed with junk / xml character while submitting the requests from application (e.g. Account Analysis Report)
We made the following changes.
- Added PDF Publisher style with required flag set to yes to the Account Analysis Report.
- Set proifle option "FND: Default Template Output Type" to PDF (it was blank)
- The pasta_pdf.cfg is configured to use pdftops for conversion
- Restarted the manager.
After this, the above report is priting fine and pdftops is converting it to correct format before printing.
But one of the printer that Oracle EBS is configured is getting stuck specifically for this postscript based request. The same report prints well on another printer.
The 'lpstat -t' shows the following status for the failing printer.
=============
printer PRT1 is idle. enabled since Tue 23 Jul 2013 03:24:40 PM EDT
/usr/lib/cups/filter/pstoraster failed
=============
The printer queue logs on the application servers shows the following details for the failing printer.
=========================================
I [22/Jul/2013:15:00:48 -0400] [Job 137] Queued on "PRT1" by "appldfin".
I [22/Jul/2013:15:00:48 -0400] [Job 137] Started filter /usr/lib/cups/filter/pdftops (PID 13530)
I [22/Jul/2013:15:00:48 -0400] [Job 137] Started filter /usr/lib/cups/filter/pstoraster (PID 13531)
I [22/Jul/2013:15:00:48 -0400] [Job 137] Started filter /usr/lib/cups/filter/hpcups (PID 13532)
I [22/Jul/2013:15:00:48 -0400] [Job 137] Started backend /usr/lib/cups/backend/socket (PID 13533)
E [22/Jul/2013:15:00:48 -0400] [Job 137] Job stopped due to filter errors.
==========
The printer that works fine on the same application server has the following message.
==========
I [22/Jul/2013:15:16:44 -0400] [Job 139] Queued on "PRT2" by "appldfin".
I [22/Jul/2013:15:16:44 -0400] [Job 139] Started filter /usr/lib/cups/filter/pdftops (PID 15825)
I [22/Jul/2013:15:16:44 -0400] [Job 139] Started backend /usr/lib/cups/backend/socket (PID 15826)
I [22/Jul/2013:15:16:44 -0400] [Job 139] Completed successfully.
==============
It only goes through 2 filters and prints just fine
The system admin team has tried to re-install the printer driver but no luck.
Any idea what could be the cause and how can fix it?
Any pointers will be highly appreciated.
Thanks
Sunil Bhavsar

Thanks Hussein.
I will check the 2 options you recommended. At the same, I would like to test the direct print from the OS using pdftops utility. But not sure how can I do that?
The concurrent request creates the .tmp file under APPLTMP and pass that as the parameter while printing such requests. But if we need to test the .PDF output using pdftops directly, what should be the syntax? Or I would say, what should be the input file and output file?
e.g.
pdftops {infile} {outfile}
I have got the .PDF output under $APPLCSF/$APPLOUT. But from one of the failed request logs, I see the system passes both as .tmp. If we need to test this directly, is there any way?
In the meantime, I will check the debug logs option and update if it provides any additional information.
Regards,
Sunil

No print codebar with Acrobat for HP-UX

Similar Messages

Maybe you are looking for