No Problem hooking up Vista laptop with WRT110 Wireless Router but can not get XP laptop to see it

I purchased a WRT110 Linksys wireless router this afternoon and had no problem configuring it for my wired desktp and my wireless Vista laptop, but my Acer XP wireless laptop will not even see the network. I have tried WEP, WAP, and no security, but I can see the neighbors routers but I can not see mine. My XP laptop is an Acer 3680-2574 with a Broadcom 802.11g network adapter.

Is the SSID enabled on the router ?
What is the firmware on the router ?
Click here to check the updated list of firmwares.
For information on upgrading the firmware on the linksys routers :
http://linksysfirmwares.googlepages.com/upgradingfirmware
For information on wireless security :
http://linksysfirmwares.googlepages.com/wirelesssecurity
C | EH
linksyshelp.blogspot.com

Similar Messages

HT3500 I have a new epson wireless printer but can not get my Mac laptop to print to it even after doing the installations. What do I need to do

I have a new epson wireless printer but cnannot get my Mac laptop to print to it. Any suggestions

Can you find your printer in Print & Fax?

I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI inputs in the back.

I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
The receiver has two HDMI inputs in the back. However they say they are not for PC's. Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables. I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV. But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
My Email is [email protected]
Do you have any suggestions
Thanks
Bob

I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
Bob

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

I have multiple emails associated with my i phone, but can't get my mac to associate some of the email names because it is associated with other apple id , but it's my id. how can i get around this?

I have multiple emails associated with my i phone, but can't get my mac to associate some of the email names because it is associated with other apple id , but it's my id. how can i get around this?

- Try contacting iTunes for the password problem:
Apple - Support - iTunes - Contact Us
- For the other problem you can try a reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- The next standard thing to do is to download/install a new app but you cant 'do that.
- Instead, try restoring from backup.

I am trying to import my cd's onto itunes on a new macbook pro. i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"

i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"
thank you

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

After moving from my home country (Poland) to the Middle East (UAE) with the same computer I can not get connected to Apple Store and iTunes Store.

After moving from my home country (Poland) to the Middle East (UAE) with the same computer I can not get connected to Apple Store and iTunes Store. Any clue why?
Regards,
Maciek

Click the round flag icon bottom right corner of the App Store window.

Hello my name is leandro from months ago and am trying to connect with my apple id but informs me that it is wrong and I can not buy or upgrade my mac from the official website of apple can go with my ide but can not get response technical support'm from

hello my name is leandro from months ago and am trying to connect with my apple id but informs me that it is wrong and I can not buy or upgrade my mac from the official website of apple can go with my ide but can not get response technical support'm from Argentina someone could help me

Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

Replace old router with WRT110 and now I can not see shared printer on network

Replaced a BEFW11S4 with a WRT110. Now I can not see a shared printer on the network any more. I have not changed anything on the computer that has the printer shared. I can see the internet on all the computers, but not the shared printer. can you help?

First which you need to check, is your printer is working Offline on your computer. In this case you need to Re-map your Printer on your Computers back again. First check if you have any Firewall or Antivurs Installed on your computer try to disable it and check if you are able to print from your computer. If not then try to Remap the printer on your computer.
Go to Network connections window and if you are able to see your computer name on which the printer is installed, then right click on the Printer and click on "Connect" or "MAP" once done you will be able to print from your computer.
Note down the IP address of the Computer on which you have Installed the Printer. (Click on Start - Run - CMD and click Ok, now in the command prompt type "ipconfig" and note down the Ip address, Then go to your other computer and Click on Start - Run - CMD and click Ok and now in the Command prompt type "ping (IP address of your main computer) and hit enter and check if you are getting any replies. If yes, then again click on "Start - Run - type ( \\ip address of your main computer) and click Ok, and now you will be able to see your printer name then right click on it and click on "Connect" or Map, once done, now check if you are able to print from your computer.

I just bought a new Epson projector, connected it to my Mac with a USB cable but can't get anything to display. Any suggestions?

I just bought a new Epson projector, connected it to my Mac with a USB port and can't get any display. Any suggestions?

USB is not a Video Interface. to use it with this projector, you must have downloaded and be running:
Macintosh
USB Display v1.50
Mac OS X (v10.7 - v10.7.x), Mac OS X (v10.6), Mac OS X (v10.5)
epson14423.dmg - 2.9MB - posted on 10/24/11
This file contains the Epson USB Display v1.50. This software, along with a USB cable, allows you to display images from your computer to your projector.
Installation instructions:
Double-clicking this file creates a disk image on your desktop.
Open the disk image.
Double-click the installer icon to begin the installation.
Download Now
I think it may be superior to get a VGA or HDMI adapter and use the display features built into your Macintosh.

Rapidshare link not working with WRT110 wireless router

I am trying to download using rapidshare but after the countdown timer reaches zero and the download link button appears, i couldn't get the link for the download file. This happens when i am wireless but when i connect my laptop directly to the linksys WRT110 router via LAN cable, i can get the link for the download file without problems.
What settings do i need to do to fix this? The rapidshare says it might be due to a rotating IP address or something. Only the rapidshare website is having this problem, other downloading sites doesn't seem to have this problem.
i am using a WRT110 router, with no security, on a wireless connection on my laptop on windows vista, using firefox.

Tried Internet Explorer 7, its the same problem. it still takes some time before i can get the link for the download file. Although i sometimes can get it faster with IE than with firefox.
Any solutions to this problem? I still thinking its the Routers configuration that has to be modified to solve this problem.

Laptop is connected to router but can't access any...

Hi Everyone
A BT engineer came yesterday to set up BT Infinity broadband in my laptop and everything worked fine until this morning.
When I switched on my laptop and my router, the icon on the bottom right hand corner of my laptop screen indicates that I'm connected to my router but when I try to open up Internet Explorer to access any website, it says that the page can't be displayed. I've tried switching both my laptop and router on and off to no avail. I'm on Windows 7 and have an HP Pavilion g6 laptop. My router is connected wirelessly to my laptop. I can surf the net with my iPad with no problems at all which suggests that the problem is with my laptop but I have no idea what the problem is and how to fix it! Has anyone come across this problem before? Any help would be greatly appreciated. Thanks.
Rosie

It could be that your computer has IPv6 selected. Try disconnecting it as follows:
Select Start
In the search field type.ncpa.cpl and press enter.
In the new window right click on your wireless network connection and select properties
In “This connection uses the following items” section remove the tick beside Internet Protocol Version 6 (TCP/IPv6) then press OK
Left click on Internet Protocol IPv4, click properties . Check the options to obtain IP address and DNS server address automatically.
Once done try and connect to Internet.
Also make sure that your Wireless Network card has up to date drivers. Check on the Laptop or Network card manufatures website rather than using Windows which can be out of date.

Put hp recipe box on new laptop but can not get grcery list to iphone

put hp recipie box on new laptop can not sync grocery list to i phone can any one help

Please Get the iPad User Manual for iOS 5.

My Atv2 is very slow movies and shows take forever to load it plays for a few minutes then pauses again. I thought if was a problem with my wireless router but I replaced it with a new airport extreme and the problem persists. Air play is just as slow.

My Atv2 is very slow with both AirPlay and rented and purchased content I spoke to apple rep and tried the things he suggested but the problem persists. Now it requires more lead time then the lenght of material being viewed. I haves broadband internet connection and airport extreme router so I don't think this should be a problem. Lately every time the unit goes to the screen saver an error message come up saying there was an error while loading content please try again later and you have to all over again. It is extremely frustrating. Any suggestions? What speed of transfer should I expect using AirPlay ?

I'm having the same issue. Ay fixes? Bought ATV today, music streams but videos don't and mirroring doesn't work either. Start mirror and severe lag then just drops. Been trying for couple hours. About ready to return it.

I switched music from iTunes from my old laptop to my new one, but can't get the music to play

I seem to be having problems with my new laptop, specifically in playing music on iTunes. I have a HP Envy using Windows 8. I downloaded the compatible version of iTunes for Windows 8 and moved the music from my old laptop (Dell Latitude D830) to my new one. I tried to play some of the music and after clicking play nothing happens. I have also noticed that I seem to have difficulties running the program if I don't run it as administrator. So if there is any advice anyone could give me I would greatly appreciate it.

See if this Discussion offers any assistance
https://discussions.apple.com/message/15215380#15215380

No Problem hooking up Vista laptop with WRT110 Wireless Router but can not get XP laptop to see it

Similar Messages

Maybe you are looking for