No Process seen under Applications in Workspace when webcenter enabled
Hi
I am integrating Process Space with BPM 11g. I have installed SOA, BPM, Webcenter and have also created a domain which has all these enabled. I have linked discussion, wiki and content to the web center space and also can see the process space. I am able to successfully deploy my BPM application too.
But when I try to access it through the process workspace, I find that the process link is not listed under the applications. I am able to deploy the same process and use the process successfully if the domain does not contain webcenter. Log has the following information :
1)Unable to Encrypt data.
Check installation/post-installation steps for errors. Check for errors during SOA server startup.
ORABPEL-35010
2)Unable to Encrypt data.
Unable to Encrypt data.
Check installation/post-installation steps for errors. Check for errors during SOA server startup.
3)<.> bootstrup error: Unable to Encrypt data.
Supplemental Detail Unable to Encrypt data.
Check installation/post-installation steps for errors. Check for errors during SOA server startup.
4)<.> createInternalWorkflowContext: access error: access denied (oracle.security.jps.JpsPermission VerificationService.createInternalWorkflowContext)
5)<.> Access to internal workflow context is denied.
Supplemental Detail Requested access to internal workflow context is not allowed according to security policy.
Ensure that correct security policy is used. If the error persists, contact Oracle Support Services.
ORABPEL-30515
6)<oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeployerThread.run> java.lang.Exception: ORABPEL-30515
Supplemental Detail Access to internal workflow context is denied.
Requested access to internal workflow context is not allowed according to security policy.
Ensure that correct security policy is used. If the error persists, contact Oracle Support Services.
Any insights on possible reason for this issue.
Venkat
Hi All
Just another comment on the same thing.
From some other post, I've seen that webcenter being configured in the domain caused the problem. Not sure if that is correct. Does it have to do with this issue?
https://kr.forums.oracle.com/forums/thread.jspa?threadID=1116370(last comment)
Process is not visible in BPM Workspace in Application panel (last comment)
https://kr.forums.oracle.com/forums/thread.jspa?threadID=2138159
I guess the dev server I'm using has webcenter, but unfortunately, I dont have control over it.
Regards
RaviKiran
Edited by: kiransaravi on Apr 10, 2013 12:20 PM
Similar Messages
-
Cannot open HFM application via Workspace
Hi
At times users cannot open HFM application via WorkSpace.When they open an application they can see the progress bar and the application does not come back(HUNG).
Looking into the logs at the time of incidents we find the following from the logs
An unknown error has occurred in the HsvDSSystemInfo object.
System Message Details
Error Reference Number: {16E56999-6F2A-4905-99D5-B65C14A14F81} Num: -2147210624; User: Type: 0; DTime: 21/09/2009 12:39:54 PM; Svr: AU02UAP093QAN32; Application:
File Error List
File: CHsvDSSystemInfo.cpp Version: 9.3.1.0.1502 Line: 1981 Error: (-2147210624)(0x80042A80)(An unknown error has occurred in the HsvDSSystemInfo object.)
XML Error String
+<?xml version="1.0" ?>+
+<EStr>+
+<Ref>{16E56999-6F2A-4905-99D5-B65C14A14F81}</Ref>+
+<User></User>+
+<DBUpdate>157330616</DBUpdate>+
+<ESec>+
+<Num HEX=0x80042A80>-2147210624</Num>+
+<Description Src=HFM>An unknown error has occurred in the HsvDSSystemInfo object.</Description>+
+<Type>1</Type>+
+<DTime>21/09/2009 12:39:54 PM</DTime>+
+<Svr>AU02UAP093QAN32</Svr>+
+<File>CHsvDSSystemInfo.cpp</File>+
+<Line>1981</Line>+
+<Ver>9.3.1.0.1502</Ver>+
-<DStr>ORA-01400: cannot insert NULL into ("HFMOWNER"."QANTASHFM_USERPARAMS"."PARAMETERKEY")</DStr>-
+<ExErr></ExErr>+
+<PSec>+
+<Param>INSERT INTO QANTASHFM_USERPARAMS (Username,EntryIDX,ParameterKey,BLOBData) values(N'admin@Native Directory',1,N'','19')</Param>+
+</PSec>+
+</ESec>+
+</EStr>+
Is this a known issue? What are the steps to resolve this issue?
Thanks in AdvanceHi Manoj,
Please check the following points
Is shared service is running
Is HFM application thick client working
Is application been creataed, if yes, is that application registered with shared services.
Check Workspace services is running or not, and Hyperion Financial Managment services is running or not.
Make sure that all services are running before you open workspace.
Let me know what your system gives messages.
Regards
Raj - Learner -
Opening a self serve yogurt shop where you use a scale to weight product the weight goes to ipad to cdalculate price. Has anyone seen this application or process? Please help?
I understand the inconvenience you are experiencing when working with Office 2013.
If you have any feedback about Office 2013 product, click the and submit to Microsoft.
Microsoft will decide how to fix the problem for all customers.
For the activation mechanism, it intends to protect customers of their rights and interests.
For a retail version of Office, if it was purchased with a disk, Microsoft account is not necessary during the installation.
For volume license of Office, refer to the following link to deploy Office suites can be much efficient:
http://technet.microsoft.com/en-us/library/cc178982.aspx
For the problem Office 2013 keep crashing, check the following link to check:
http://support.microsoft.com/kb/2813143/en-us
http://support.microsoft.com/kb/2758592/en-us
Thanks,
Tyor Wang
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no
help.
If you have any feedback on our support, please click
here -
When ever we opened HFM Application through workspace, getting struck and through client is going good. Any guess on this.. please share.
We have tried to Reset IIS, Recycle Services & Reboot Servers -- After this some time will works good , Then again isue repeats.
Appriciate your help!
Regards,
RSVYeah the issue seem to be with IIS,
Try launching the application through the url
http://hfmwebserver/hfm/logon/processlogon.asp?workspace=false&username=admin&password=password replacing hfmwebserver with web server you have in your env and username and password respectively to see if there is some improper registration of Web Server with HFM.
Also check IIS worker process settings.
Thanks
Amith -
Oracle Planning gives error when trying to open application from Workspace.
Hello,
We have version 11.2.2.0.0 of Planning installed. After the install of Essbase Studio Server we have hit some issues where Planning does not seem to be available. Despite re-deploying several times and other things, we cannot connect to the Planning server.
Planning does seem to be listening
c:\Oracle\Middleware\user_projects\domains\EPMSystem\bin>netstat -na | findstr 8300
TCP 127.0.0.1:8300 0.0.0.0:0 LISTENING
TCP 155.209.11.122:8300 0.0.0.0:0 LISTENING
TCP [::1]:8300 [::]:0 LISTENING
but the test URL will not resolve
http://hcb-mapp156:8300/HyperionPlanning
Error 404--Not Found
When trying to open a Planning application from Workspace we see the following errors:
Description: Invalid or could not find module configuration 'HyperionPlanning.planning'.
URI: http://localhost:19000/HyperionPlanning/conf/HspJSConfig.xml
Status: 404 - Not Found
Content: text/html; charset=UTF-8
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 404--Not Found</TITLE>
</HEAD>
<BODY bgcolor="white">
<FONT FACE=Helvetica><BR CLEAR=all>
<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 404--Not Found</H2>
</FONT></TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068 <i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.5 404 Not Found</H4>
</FONT><P><FONT FACE="Courier New">The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.</p><p>If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.</FONT></P>
</FONT></TD></TR>
</TABLE>
</BODY>
</HTML>
Hope someone can help here.
Thanks,
Philip.Hello,
Yes, I see this error in the logs:
<Nov 12, 2013 11:09:17 AM CET> <Warning> <HTTP> <BEA-101162> <User defined listener com.sun.faces.config.ConfigureListener failed: java.lang.NullPointerException.
java.lang.NullPointerException
at com.sun.faces.config.ConfigureListener.contextDestroyed(ConfigureListener.java:241)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:482)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextDestroyedEvent(EventsManager.java:200)
Truncated. see log file for complete stacktrace
>
<Nov 12, 2013 11:09:17 AM CET> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'PLANNING [Version=11.1.2.0]'.
weblogic.application.ModuleException:
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: java.lang.NullPointerException
at java.io.File.<init>(File.java:222)
at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:213)
at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:30)
at com.hyperion.hit.tool.deploy.update.UniversalListener.contextInitialized(UniversalListener.java:80)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
Truncated. see log file for complete stacktrace
Thanks. -
Error when processing asset under construction (AuC) for WBS element message no cj824
Hi,
i am getting error message when i change dates in activities.
Error when processing asset under construction (AuC) for WBS element
Message no. CJ 824
i have checked related post but did not find any solution. also check SAP Note but not related to my issue.
Please guide.
thanks
SunilHi Ken,
Please check below screens:
according to this error message AUC has some missing field or some incorrect value. but when i checked via program RAUNVA00 which will display
Incomplete Assets - Detail List.
but this program does not return any incompleteness.
i found many threads and SAP Not but none of is related to my program. this problem comes when i change dates in activity and save the project.
Please suggest what to do now.
thanks
Sunil -
Cannot see application in workspace (Created App via HFM client not BPMA)
Dear All,
I have some trouble with my 11.1.1.0 installation. After installation and configuration, I try to goto workspace to find consolidation administration and cannot find it. Then I tried to create an app using the HFM client but after granting all security to the user account, the application will not show up in workspace.
Is there anyway to un-register the HFM installation from Shared Services and Workspace and re-register the HFM installation. There is an option in previous Hyperion version 9 but in 11.1.1.0 there is no such option under the EPM configurator.
Can I fix it or it's pretty much a re-installation. Please give me some advice
Thanks in advanceTried uninstall HFM and reinstall again.
Ran EPM onfigurator and everything seem to processed ok.
I can log onto Shared Service and see that I have created an HFM Application and be able to provision users to the application.
But when I log onto Workspace, it just won't show anything related to HFM, the application is not on my application list and under "Classic Application Administration" only Planning shows up and no HFM.
I have Apache running on 19000 and IIS running on 80.
Any idea what I can do to trouble shoot?
I tried to create 2 apps, I using http://compter:19000/hfm as security url and 1 using :80/hfm and neither makes any difference.
Edited by: Redcomet on Oct 15, 2009 7:42 PM -
Can not open hfm application in Workspace
When try to open HFM application from Workspace, application failed to open, errors pop up as below fyr, pls help:
--------------01----------------------------------------------
An error occurred processing the result from the server. Description: Invalid or could not find module configuration 'hfmadf.application'.
--------------02----------------------------------------------
Required application module hfmadf.application is not configured.
--------------03----------------------------------------------
URI: https://epm-dev.connect.te.com/hfmadf/GlobalWorkspaceNav/bpm/conf/hfmConfig.jsp Status: 503 - Service Temporarily Unavailable Content: text/html
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF or method not idempotent.solved after HFM service restarted.
-
Unable to access applications in workspace,shared services
Hi ,
I am Unable to access applications in workspace and shared services on EPM 11.1.1.3. It happened after normal shutdown/startup scripts were run.
But when I reconfigure the Weblogic web server and run the services again I can access the applications.This is happening frequently now.
Is this anything related to user profiles on the server as we are migrating these to other server.
Can any one help me with this .
Please find the Shared services log below:
<22-Oct-2010 10:25:19 o'clock BST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
D:\bea\weblogic92\platform\lib\p13n\p13n-schemas.jar;D:\bea\weblogic92\platform\lib\p13n\p13n_common.jar;D:\bea\weblogic92\platform\lib\p13n\p13n_system.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_common.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_schemas.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_system.jar;D:\bea\weblogic92\platform\lib\wlp\wsrp-common.jar>
<22-Oct-2010 10:25:21 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-windows-ia32 from BEA Systems, Inc.>
<22-Oct-2010 10:25:25 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 MP3 Mon Mar 10 08:28:41 EDT 2008 1096261 >
<22-Oct-2010 10:25:29 o'clock BST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : D:\bea\license.bea>
<22-Oct-2010 10:25:29 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<22-Oct-2010 10:25:29 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<22-Oct-2010 10:25:30 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file D:\Hyperion\deployments\WebLogic9\servers\SharedServices9\logs\SharedServices9.log is opened. All server side log events will be written to this file.>
<22-Oct-2010 10:25:47 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<22-Oct-2010 10:25:57 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<22-Oct-2010 10:25:57 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
log dir isD:\Hyperion\logs\SharedServices9
urlManifest zip:D:/Hyperion/deployments/temp/servers/SharedServices9/tmp/_WL_user/interop/tthmcu/war/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
Shared Services Version: 11.1.1.3.24
Shared Services Drop Number: 6
Attempting to verify the database configuration
Attempting to verify the database configuration
Database configuration test passed.
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Auto-Initializing Domain
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Configuration found in classpath
22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Domain configuration : {org.apache.slide.lock=true, org.apache.slide.versioncontrol=true, org.apache.slide.debug=false, org.apache.slide.search=true, org.apache.slide.security=true, org.apache.slide.urlEncoding=UTF-8, org.apache.slide.domain=D:/Hyperion/deployments/WebLogic9/SharedServices9/config/Domain.xml}
configURL: file:///D:/Hyperion/deployments/WebLogic9/SharedServices9/config/CSS.xml
Done initialize: com.hyperion.css.CSSAPIImpl@283baf
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@27efaa
connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@454a3b
CMSOfflineServlet Initialized
Adding audit listener
Shared Services Initialized Successfully
<22-Oct-2010 10:26:56 o'clock BST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<22-Oct-2010 10:26:56 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<22-Oct-2010 10:26:56 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<22-Oct-2010 10:26:57 o'clock BST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias hyperion from the jks keystore file D:\hyperion_SSL_Repository\hyperion.jks.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\bea\JROCKI~1\jre\lib\security\cacerts.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.86.57.43:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.87.248.108:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 127.0.0.1:28443 for protocols iiops, t3s, ldaps, https.>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "127.0.0.1", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "LGWHYPWEB.uk.baa.com", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "SharedServices9" for domain "WebLogic9" running in Production Mode>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "LGWWEB026.uk.baa.com", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
<22-Oct-2010 10:26:58 o'clock BST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<22-Oct-2010 10:27:08 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:28:36 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwdbs026.uk.baa.com - 10.86.41.33 instead of an SSL handshake.>
22-Oct-2010 10:28:38, /files, HEAD, 401 "Unauthorized", 125 ms, %v
22-Oct-2010 10:28:38, /files, HEAD, 200 "OK", 266 ms, %v
22-Oct-2010 10:28:40, /files, HEAD, 401 "Unauthorized", 16 ms, %v
22-Oct-2010 10:28:41, /files, HEAD, 200 "OK", 94 ms, %v
22-Oct-2010 10:28:42, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:42, /files, HEAD, 200 "OK", 93 ms, %v
22-Oct-2010 10:28:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:43, /files, HEAD, 200 "OK", 94 ms, %v
22-Oct-2010 10:28:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:44, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:28:45, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:45, /files, HEAD, 200 "OK", 93 ms, %v
22-Oct-2010 10:28:47, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:47, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:28:48, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:28:48, /files, HEAD, 200 "OK", 78 ms, %v
<22-Oct-2010 10:29:40 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwapp026.uk.baa.com - 10.86.51.104 instead of an SSL handshake.>
<22-Oct-2010 10:30:16 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwapp026.uk.baa.com - 10.86.51.104 instead of an SSL handshake.>
<22-Oct-2010 10:32:25 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
22-Oct-2010 10:32:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:43, /files, HEAD, 200 "OK", 78 ms, %v
22-Oct-2010 10:32:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:44, /files, HEAD, 200 "OK", 63 ms, %v
22-Oct-2010 10:32:45, /files, HEAD, 401 "Unauthorized", 0 ms, %v
22-Oct-2010 10:32:45, /files, HEAD, 200 "OK", 63 ms, %v
<22-Oct-2010 10:32:46 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:34:00 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
<22-Oct-2010 10:35:28 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
log dir isD:\Hyperion\logs\SharedServices9
urlManifest zip:D:/Hyperion/deployments/temp/servers/SharedServices9/tmp/_WL_user/interop/tthmcu/war/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
Shared Services Version: 11.1.1.3.24
Shared Services Drop Number: 6
Populating Application Info
Getting LCM callback info from Registry for product: HUB
LCM Callback: https://LGWWEB026.uk.baa.com:28443/interop/framework/lcm/HSSMigration
Populating Product Info
Thanks in advance
Edited by: 790426 on 25-Oct-2010 06:17You must first check if you have configured the web server to include the hfm/planning products.
Then you can refer to the thread below:
Not able to see Consolidation Administration
The latter definitely applies to version 9.3.1, but it could be helpful. -
Problem description:
Computer takes a long time to fire up. Spinning ball is seen during start up, sometimes when login dialog box, and sometimes after entering login password. My mac freeze often, especially when using Lightroom…. Help is much appreciated!
EtreCheck version: 2.0.11 (98)
Report generated 3. november 2014 kl. 01.23.41 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2:49:19
Disk Information: ℹ️
Samsung SSD 840 EVO 500GB disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (260.35 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Configuration files: ℹ️
/etc/sysctl.conf - Exists
/etc/hosts - Count: 15
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/IPVanish.app
[not loaded] foo.tap (1.0) Support
[not loaded] foo.tun (1.0) Support
/Applications/LaCie Desktop Manager.app
[not loaded] com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) Support
[not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) Support
[not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) Support
[not loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) Support
/Applications/Private Eye.app
[loaded] com.radiosilenceapp.nke.PrivateEye (1 - SDK 10.7) Support
/Library/Application Support/HASP/kexts
[not loaded] com.aladdin.kext.aksfridge (1.0.2) Support
/System/Library/Extensions
[loaded] com.hzsystems.terminus.driver (4) Support
[not loaded] com.nvidia.CUDA (1.1.0) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.sony.filesystem.prodisc_fs (2.3.0) Support
[not loaded] com.sony.protocol.prodisc (2.3.0) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
CUDA: Path: /System/Library/StartupItems/CUDA
ProTec6b: Path: /Library/StartupItems/ProTec6b
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.digitalrebellion.EditmoteListener.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.intego.backupassistant.agent.plist Support
[running] com.mcafee.menulet.plist Support
[invalid?] com.mcafee.reporter.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.orbicule.WitnessUserAgent.plist Support
[loaded] com.xrite.device.softwareupdate.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[running] com.aladdin.aksusbd.plist Support
[failed] com.aladdin.hasplmd.plist Support
[running] com.edb.launchd.postgresql-8.4.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.intego.BackupAssistant.daemon.plist Support
[loaded] com.ipvanish.helper.openvpn.plist Support
[loaded] com.ipvanish.helper.pppd.plist Support
[invalid?] com.mcafee.ssm.ScanFactory.plist Support
[invalid?] com.mcafee.ssm.ScanManager.plist Support
[running] com.mcafee.virusscan.fmpd.plist Support
[loaded] com.mvnordic.mvlicensehelper.offline.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.orbicule.witnessd.plist Support
[loaded] com.radiosilenceapp.nke.PrivateEye.plist Support
[running] com.xrite.device.xrdd.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.digitalrebellion.SoftwareUpdateAutoCheck.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Skype Program (/Applications/Skype.app)
GetBackupAgent Program (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
PhoneViewHelper Program (/Users/[redacted]/Library/Application Support/PhoneView/PhoneViewHelper.app)
EarthDesk Core UNKNOWN (missing value)
Dropbox Program (/Applications/Dropbox.app)
AdobeResourceSynchronizer ProgramHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
i1ProfilerTray Program (/Applications/i1Profiler/i1ProfilerTray.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 600 - SDK 10.10
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SiteAdvisor: Version: 2.0 - SDK 10.1 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
GarminGPSControl: Version: 3.0.1.0 Release - SDK 10.4 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.2 Support
F5 Inspection Host Plugin: Version: 6031.2010.0122.1 Support
f5 sam inspection host plugin: Version: 7000.2010.0602.1 Support
Safari Extensions: ℹ️
Facebook Cleaner
Better Facebook
SiteAdvisor
Incognito
Bing Highlights
YouTube5
AdBlock
YoutubeWide
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
CUDA Preferences Support
EarthDesk Support
Editmote Support
Flash Player Support
FUSE for OS X (OSXFUSE) Support
Growl Support
Java Support
Witness Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
13% taskgated
12% WindowServer
1% WitnessUserAgent
1% sysmond
1% Activity Monitor
Top Processes by Memory: ℹ️
327 MB com.apple.WebKit.WebContent
137 MB softwareupdated
94 MB Safari
82 MB VShieldScanner
82 MB Dock
Virtual Memory Information: ℹ️
65 MB Free RAM
1.58 GB Active RAM
1.54 GB Inactive RAM
647 MB Wired RAM
2.95 GB Page-ins
260 MB Page-outsYou have SCADS of extensions and the things running. McAfee, Intego, Orbicule, CleanMyMac, and others I've not ever even heard of. My first recommendation would be to remove all of these and see if things improve.
-
Error while creating planning application through workspace
Hi,
I am getting the following error when i am trying to create the classic planning application through workspace.
Invalid or could not find module configuration.
Required application module HyperionPlanning.AppWizard is not configured. Please contact your administrator.
Communication Error.
http://localhost:45000/HyperionPlanning/conf/HspJSConfig.xml?LOCALE_LANGUAGE=en
Please suggest me how to resolve this error. Also please share the order in which services to start.
Thanks in Advance,
Naveen SuramHi John,
I am facing the same issue. Reconfiguring Web server did not help. It is still not coming up and the link to planning that you have shared here is also not working. I am doing it on RHEL and facing issue with the same. Any help will be greatly appreciated. I checked the mod_jk log which has the following:
*[Tue Jan 31 20:17:01 2012] [info] ajp_send_request::jk_ajp_common.c (1186): Error connecting to the Tomcat process.*
*[Tue Jan 31 20:17:01 2012] [info] ajp_service::jk_ajp_common.c (1665): Sending request to tomcat failed, recoverable operation attempt=2*
*[Tue Jan 31 20:17:01 2012] [error] ajp_service::jk_ajp_common.c (1673): Error connecting to tomcat. Tomcat is probably not started or is listening on the wrong port. worker=Workspace failed errno = 111*
*[Tue Jan 31 20:17:01 2012] [info] jk_handler::mod_jk.c (1875): Service error=0 for worker=Workspace*
I don't know what to do now.
Thanks in advance.
Saurabh -
Issue in creating Database Connection to HFM Application through workspace
Hi,
This is a fresh installation. We are trying to create a new database connection in workspace for HFM Application.
When i click on the Application selection icon, it gives me the below error message,
*"Error connecting to database connection nasbyphyp03: Error: Error getting CSS support information for driver* HsvAdmDriver*".*
I tried re-installing the HsvAdmDriver, but still the problem persists. (nasbyphyp03 is the server name)
But, i am able to access HFM Application from workspace and smartview.
Please advice.
Thanks,
SivaCan anyone suggest me the solution ???
We are struck with this and unable to process any Reports
Thanks,
Siva -
Unable to Access New Planning Application via Workspace
Hi all
i have installed a new Planning server into the existing platform (there is no hardware load balancing so is seen as a single instance of planning) however i am using the existing workspace and HSS.
I have successfully installed and configured the new Essbase and Planning Products and registered against shared services. The issue i have is that i cannot get the new Planning application to be viewable via workspace. I get Application is invalid.!!.
The original (Existing) Planning on server 1 is set to 'Active Instance' in the product registration and these apps can be viewed by workspace etc.
I have created Planning on Server 2 and have created a new instance, but not set the 'Active instance' in the product registration!!!, i have also registered this as the web host tier on the Server 2 not the Server1.
If i use the direct planning URL's for either Planning Server 1 or Planning Server 2 i see the planning applications that are on each server!!
Can anyone tell me what configuration i have missed out! If it helps the Planning Server 1 has its own Shared Services Project and Planning Server 2 has its own Shared Services project.
I have restarted services on Server2 BUT not Server 1 as i am not allowed an outage until the end of the month!!.Hi,
Did you create a new Planning app in your new environment? Can you access this new app as a test?
You will need to asociated your app with an active instance and datasource.
In the workspace, when you go to Navigate - Applications - Planning, do you see your Planning app or is it not there at all?
Did you check the logs for any errors? Are you sure the user you are logging on to the Workspace as has been provisioned for that planning app?
When you configured BI+ did you make sure you ticked Planning?
Seb
www.taysols.com.au -
Change product version under application component
Hi all,
how can i change the product version under application component at integration scenario?
You have the possibility to "Display/Change Application Component" if you click with your mouse (right button) on the application component bar but under application component type you aren't able to change anything.
Thanks in advance!
JochenHi,
You cannot change the product version.
When you Righ Click on the Application Component and say change, the only things that you can change are
1. Role,
2. Integration Process
3. Further Attributes.
if you need to change the product version, you need to Right Click --> Insert Application COmponent and then select the correct product version.
Regards
Bhavesh -
Not getting the create application in workspace for HFM
I have the sample application called "Comma" which was created by me.Now when I go to open the comma application, nothing happens but I also do not get error.
Dimension Library and other things open fine.
Also I do not see the icon to create a new application any more when I go to consolidation administration through workspace.
Navigate>Administer>Classic Application Administration>Consolidation Administration.
I do not see the option to create application. I also do not get any error from workspace.
please advise.......any help will be appreciated.If you can see "Tasks" and "Tips" you aren't in Consolidation Administration. Try again to go to Navigate > Administer > Classic Application Administration > Consolidation Administration.
This should open a tab at the bottom-left of the screen that says Consolidation. Under the Navigate button, you should also see Browser View (or Project View). Make sure to select Browser View by clicking on the arrow if necessary.
You should then see Tasks with a plus sign next to it. Ungroup Tasks to find Consolidation Administration. Click that to find Create Application.
Maybe you are looking for
-
How can I do a screen dump on my Mac?
I am trying to print off a list of tracks from iTunes but if I copy and paste into Word it doesn't print in proper order so I'm now trying to do a screen dump but can't remember how to do it. Can anyone help please?
-
11.3 iTunes Podcast mess-up - will Apple ever do something about it?
This is the second major Podcast mess-up within 10 months!!!!!!! Today is Monday July 21 - I downloaded the fatal for podcasts List View and very confusing and annoying for podcasts MyPodcasts View on Friday July 11 (morning) - on Sunday July 13 Appl
-
hi, Please suggest me the table or procedure to find the Fixed Cost in SALES ORDER COSTING. the field name is FK,Data element is CK_FK_S1 ,structure is CKCOSTLINE. Thanks in Advance.
-
Can i trade my apple IPAD 2 for IPAD 3
I havent had my IPAD 2 for a year but now I see that the IPAD 3 is coming out. Does the apple Store allow trade in? Thanks
-
I have a problem running Crystal Reports XI. As soon as I try to move a field from the field explorer into a report I get a message that says: crw32.exe has encountered a problem and needs to close. We are sorry for the inconvenience. After that I ge