No processor object found for key

Hi All,
I am usnig a dunning in insurance industry. I do a dunning proposal run (VPVA)which runs fine without any error and it shows '1 dunning notice created'.
after the proposal I do dunning activity run VPVB but here it is giving an error
'No processor object found for key 20120124/3508/0000003246/CAB000000269/000001/00000'
Message no. >A121
Please help me solving this issue.
Thanks & Regards
Anshu

Hi Anshu,
I am facing same problem for dunning for utilities company
It is my humble request to you to please provide me details as to how you resolved error faced by you
thanks in advance for your help in this.
Kind regards,
Vinod Khelani

Similar Messages

Create Object References for Key field

Hi Experts,
Question 1- Do we have any standard task that create BOR object reference using key field?
Question 2 - If not, i have created a task with key field as import parameter and BOR type as return object reference. No i am just using macro "SWC_CREATE_OBJECT OBJREF_ARD 'AssetRequestDocument' ASSETREQUESTID." where ASSETREQUESTID is key field. OBJREF_ARD is object ref type.
Problem comes here - Its not getting instantiated, i debugged an saw it checks for logical system in the FM OWN_LOGICAL_SYSTEM_GET, i guess since SWO_CREATE is remote enabled FM it is checking for OWN_LOGICAL_SYSTEM_GET function. In our system for the client there is no logical system defined and i dont have any idea how to customize table T000 for logical system.
Note - There is nothing related to communication between two system.
Can anyone help me out?
Thanks in Advance,
Pritam Kunal

Hello,
It's a method. You make a task which calls that method and passes in the BOR type and its key.
It instantiates an instance of the BOR and passes it back out.
So, no, it's not a generic BOR!
regards
Rick Bakker
Hanabi Technology

No key field found for creation of DataSource - Classification Datasource

Hello,
While trying to create a clasiffication datasource based on 0PLANT_ATTR, when i assign a characteristic and push the DataSource button, i get the following message:
No key field found for creation of DataSource
Diagnosis
During generation of a classification or configuration DataSource, only those key fields for the object table (field "Obj.Tabelle") that are already present in the basis DataSource transferred to the extract structure. This is the case when none of the key fields of the object table were found in the structure of the basis DataSource.
System response
A DataSource cannot be created without key fields. The action was cancelled.
Procedure
Check whether you have selected the correct basis DataSource and object table. For more information, please see SAP Note 569849.
Do you know what can be the problem?
Thank you and regards

Hi Alberto,
plants are a special case. The key which is used for the classification
of plants (object type BETR) is not the same as the key which is used in
datasource 0PLANT_ATTR.
BETR has key LOCNR (Site). That's a customer related to a plant. The
customer number will be extracted in field LOCNR.
0PLANT_ATTR extracts the plant in its key field WERKS.
Transaction CTBW and the generic extraction program for classifications
don't know the relationship between LOCNR and WERKS. So they cannot map
them.
I do recommend a solution which would add the mapping between
LOCNR and WERKS:
1. Create please the classification datasource as intended, but use
datasource 0RT_LOC_MGR_ATTR as basis datasource. It's the only
datasource of the content where LOCNR is a key field. So
0RT_LOC_MGR_ATTR is used as a dummy here, to allow transaction CTBW to
create the classification datasource. It's not necessary to extract
data with datasource 0RT_LOC_MGR_ATTR.
2. Extend please the extract structure of the created classification
datasource. Add please field WERKS using component type WERKS_D. Make
this field visible.
3. Fill field WERKS in the extractor user exit EXIT_SAPLRSAP_002. WERKS
can be read from table KNA1 by using the customer number extracted to
LOCNR to select on field KNA1-KUNNR.
4. Transaction CTBW_META on the BW system isn't able to append the
characteristics from the classification datasource to infosource
0PLANT, because the keys are different. So create please a new info
source with CTBW_META. This allows CTBW_META to create the info objects
for the characteristics used in the classification datasource.
5. Add please the characteristics used in the classification datasource
to infosource 0PLANT manually. You will find the info object names of
the characteristics by looking up the characteristic datasources which
are assigned to the classification datasource in transaction CTBW. From
these names you can derive the info object names:
1CL_A... -> C_A...
6. Disconnect the infosource which has been created with CTBW_META from
the classification datasource.
7. Connect please the classification datasource to infosource 0PLANT
Use following info object:
info object   field
0PLANT       WERKS
The info object names for the characteristics are explained in step 5.
8. Add an infopackage to infosource 0PLANT for the classification
datasource.
Now the extraction of classifications of sites should work.
Best regards,
Rolf
P.S. I saw the system messed it up and doesn't display any new and empty lines. Sorry, I hope you still can read it.
Edited by: Rolf Doersam on Mar 26, 2010 6:56 PM

More than one entity found for a single-object find method

Hi everyone...
I have this error when my webservice is running..I don't know what it means and what would be the best solution..
<pns:message>More than one entity found for a single-object find method.</pns:message>
it throws an Exception..
Thanks!

= More than one row found in a DB with the "unique" key supplied...
Your method is returning an object where it should return a collection ?
Enjoy

Overview of Leave --- CREATE OBJECT: The class was not found., error key:

Dear Gurus,
Iam facing this problem that, when i try to open the Leave Overview from the leave request screen. it gives the dump with message
CREATE OBJECT: The class was not found., error key: RFC_ERROR_SYSTEM_FAILURE
this also creates a dump in the back end.
The same dump is appearing when i try to view the Check Documents for the same employee from PTARQ.
Thanks in advance
Ramnath

Hi ,
please find the following solution .it will definitely work .
If you leave configuration is done.
There was an incorrect data in your system. To do these please follow following process.
delete this request using
PTARQ> Delete documents (RPTARQDBDEl)
Please read the report documentation before
deleting the request but it should be safe as it is
a development system.
Please delete this with the above information or delete all
the records for the approver.
After this,, there will be some incorrect workitem in approver inbox.
You need to clear that also by Tcode - SWWL.
ALSO check the leave request workflow of that employee and if there is any error workflow lying in the workflow delete the leave request (which was created with error) Note down the id initiater ( which had error) and in the Test Environment for Leave request (PTARQ) gave the PERNR and delete the documents ( give the id iniater in the document status ).
To check the error work flow go to SWIA and check for that Workflow (Leave) raised by the PERNR at that duration ( check in IT2001 for the duration) and give it here.
After deleting it check in the portal for the leave request if any error is occuring when trying to apply for leave.

CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key

Hi Experts,
    We are facing following problem in our ESS/MSS system. Request to suggest solution ASAP.
We are having EP7 and ECC6
*CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key: RFC_ERROR_SYSTEM_FAILURE*
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.per.in.address.fc.FcPerAddressIN.readRecord(FcPerAddressIN.java:270)
     at com.sap.xss.hr.per.in.address.fc.wdp.InternalFcPerAddressIN.readRecord(InternalFcPerAddressIN.java:545)
     at com.sap.xss.hr.per.in.address.fc.FcPerAddressINInterface.readRecord(FcPerAddressINInterface.java:150)
     at com.sap.xss.hr.per.in.address.fc.wdp.InternalFcPerAddressINInterface.readRecord(InternalFcPerAddressINInterface.java:201)
     at com.sap.xss.hr.per.in.address.fc.wdp.InternalFcPerAddressINInterface$External.readRecord(InternalFcPerAddressINInterface.java:277)
     at com.sap.xss.hr.per.in.address.overview.VcPerAddressINOverview.onBeforeOutput(VcPerAddressINOverview.java:267)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverview.onBeforeOutput(InternalVcPerAddressINOverview.java:250)
     at com.sap.xss.hr.per.in.address.overview.VcPerAddressINOverviewInterface.onBeforeOutput(VcPerAddressINOverviewInterface.java:158)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverviewInterface.onBeforeOutput(InternalVcPerAddressINOverviewInterface.java:140)
     at com.sap.xss.hr.per.in.address.overview.wdp.InternalVcPerAddressINOverviewInterface$External.onBeforeOutput(InternalVcPerAddressINOverviewInterface.java:224)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:603)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:569)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: CREATE OBJECT: The class CL_HRPA_INFOTYPE_0006_IN was not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.per.in.address.model.HRXSS_PER_P0006_IN.hrxss_Per_Read_P0006_In(HRXSS_PER_P0006_IN.java:218)
     at com.sap.xss.hr.per.in.address.model.Hrxss_Per_Read_P0006_In_Input.doExecute(Hrxss_Per_Read_P0006_In_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 61 more
Edited by: KISHOR PONKSHE on Nov 7, 2011 11:37 AM

Hello Kishore,
Please remove the entry from the table V_T582ITVCLAS related to CL_HRPA_INFOTYPE_0006_IN
Then check.
Best Regards,
Deepak.

S/A bridge problem: No object type found for the message

Hi all,
I've been spending days looking into the following problem. I have a RFCXIFile scenario. The R3 system sends data via an RFC to XI and XI post the data as a flat file on a certain server using FTP.
This scenario worked just fine for 1 exception. I could only run this scenario once. The second time I got timeouts when checking the data sent to my RFC destination using SM58. When I reactivated my RFC communcation channel I could again send 1 RFC to the system. All subsequent tries would fail.
I guess this is due to the fact that I use a synchonous call (RFC) to an asynchronous one. Thus the adapter is still waiting for the response from the XI system and will not accept any further new calls from R3.
So I figure let's use this pattern called the S/A bridge. So I designed everything according to guides and examples and I'm quite certain everything is configured right but when I run the scenario I get the following message:
<i> 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error></i>
It seems that the adapter cannot find any integration process to send the message into!?
I've looked at numerous threads on sdn and tried all kinds of stuff (looked at the cache==> code 0 = OK , tried to reactivate my integration process, checked the interface determination,...), but to no avail. Does anybody has an idea what could be wrong ?
Any help would be greatly appreciated for I'm all out of clues....
Bob

First of all, Thank you for trying to help me out here.
Some answer to your suggestions/questions:
The IP has return code 0 in SXI_CACHE. so that doesn't seem to be the problem.
I've checked the BPM for syntax errors. I doesn't have any.
I've reimported the BPM into the integration directory.
And did a full cache refresh in SXI_CACHE. Return code is (stays) zero, so that's OK.
I've already included the error message from SXI_MONI. It is in the last step ("Call Adater") that the error occurs.
The other steps execute just fine...
The RFC communcation channel accepts the incoming RFC call and puts into the pipeline, so no problems with the communication channel either. the problem is actually when the pipeline is trying to forward the message into an IP trhough the BPE_ADAPTER (according to SXMB_MONI).
Therefore I'm not able to go to into PE, because the workflow is never started. the BPE_ADAPTER does not find any active process for the interface determination i've entered.
So i can not debug the IP in the PE and check container variables, like some of you mentioned.
Maybe some more information about the scenario:
The RFC is called from an R3 system to XI over the interface "CONTROL_RECIPE_DOWNLOAD", which is an imported RFC, with a request and response message type.
Then I got a receiver and interface determination with lead the incoming RFC message to the IP, into interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI".
This is an abstract synchronous interface based on the request and response types of the "CONTROL_RECIPE_DOWNLOAD" imported RFC.
This interface is used the first step (receive) of my BPM as the synchronous interface to open the S/A bridge.
The message (container var) used in this step is
name: CORREQ
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_REQ_AI_MI" is an abstract, asynchronous interface based on the request type of the "CONTROL_RECIPE_DOWNLOAD".
Then there are 2 send steps for putting the flat files into place and finally i close the the S/A bridge using message:
name: CORRES
Category: Abstract interface
type: "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI"
The interface "XI_ERP_MF_MD_CONTROL_RECIPE_RES_AI_MI" is an abstract, asynchronous interface based on the response type of the "CONTROL_RECIPE_DOWNLOAD".
I hope this information gives you guys a better understanding of hte problem.
Really looking forward to see more suggestions and to solve this nasty problem ...
Regards,
Bob

Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object CC...

Hi All,
My user is geting the ERROR while running the actual OH calculation through CJ45 as below:
Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND FOR object
Message NO k5011.
As this is more ralaing to the costing sheet, this refers to controlling module.
We have verfied the Note 515426, but the correction were delivered in 4.7 itself. My client is using the 6.0 verion.
Can anybody suggest the reason for the above error.
Thanks & Regards
Shankar

HI,
whats the message class, message number?
BR Christian

Account 'Cost elem. for settlmt AuC to CO objects' could not be found for

Hi All,
I am facing one error massage at the time of CWIP Asset settled in Cost centre
Account 'Cost elem. for settlmt AuC to CO objects' could not be found for area 01
Message no. AU133
Which G/L Account (cost element) we have to assing there in Account determinati A090.
What is empact this our G/L Account.
Please help me to resolve this issue.
Thanks & Regards,
juhis

Hi AP,
Thanks for your reply,
We find one element there assgin but that is not a G/L account what we do we can assgin that element in the Account determination in that asset account determination OR we have to create new G/L Account.
When we create new G/L Account in which Account head we have to create and what is impact that g/l account in our Balance sheet account.
Please help me ot understand that Process.
Edited by: juhis022 on Mar 2, 2012 10:15 AM

Account 'Cost elem. for settlmt AuC to CO objects' could not be found for a

Hi All,
we are facing one error massage at the time of settlment KO88.
Account 'Cost elem. for settlmt AuC to CO objects' could not be found for area 01
Message no. AU133
Diagnosis
When creating the accounting document, the system could not find account 'Cost elem. for settlmt AuC to CO objects' in depreciation area 01 for company code CSEB.
Procedure
Enter this account in the account determination for Asset Accounting.
Thanks & Regards,
juhi

Hi Juhi...
Please check the below procedure....
If you are using the Internal order process, then
KO01 - IO Creation
ME21N - PO creation with IO as Account assignement
MIGO
MIRO
1. IO to AUC Settlement
Define the Settlement Rule iin IO - KO02   (AUC Asset)
KO88
Settlement type is "Automatic"
For Cost analysis....you can refer to KOB1   or    KO03 -> EXtras -> Cost Analysis
2. AUC to Fixed Asset or Cost Center
KO02 - Settlement Rule - Cost center   or   Fixed Asset
KO88
"Full Settlement"
If the process is
AIAB and AIBU
Refer to
AW01N
Hope it gives some idea
Thanks

No table entries found for specified key

Hi All,
I have developed a program to upload data from flat file with the help of GUI UPLOAD. It is succesfully updating data in my Z-table.
Whenever I tried to view the content of table for specific field, message shows No table entries found for specified key. However if I add * as a suffix, it shows the data & when I directly Execute table it also displays the data.
I have also cross checked the spaces before or after the specific content, no space found.
Only two fields are creating this issue Individually (one of them is key field)
Regards
Mukul Maheshwari

Hi Dear ,
Here i had implemented program go through it you can understand easily.
While creating table give one field as primary as you know that.
tables zdata1.
data it_tab type TABLE OF zdata1 WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\E50039\Desktop\data.txt'     ***************File path
   HAS_FIELD_SEPARATOR           = 'X'
TABLES
    DATA_TAB                      = it_tab
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it_tab.
zdata1-no1 = it_tab-no1.
zdata1-name = it_tab-name.
zdata1-empid = it_tab-empid.
insert zdata1.
ENDLOOP.
Flat file
1 name1 empid1
2 name2 empid2
note: Give the tabspace between values in flat file.
Edited by: Aditya.G on Oct 12, 2011 10:22 AM

SFTP Issue in OSB invocation resulted in an error: com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,ip

I created a Proxy Service to do pull file and push it to sftp server
known_hosts file is present on OSB server.
It has abcserverhostname,IP ssh-rsa AA................. ==
I created a business service to do SFTP push to sftp server (remote) - Its not working.
<Error> <SFTPTransport> <BEA-381826> <Key Not Found for host hostname,10.124....>
com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,10.124.....
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.onUnknownHost(KnownHostVerifier.java:37)
My Business Service
End Point URI : sftp://sftpserverhostname:22/directorypath
Authetication Mode : user name, password.I have created a Service Account for sftpserver and imported in Business Service.
Do I need to give anything else in known_hosts file ?
and hostname can be any random name?
<Dec 11, 2013 1:45:37 PM GMT+08:00> <Error> <SFTPTransport> <BEA-381801> <Error occured for endpoint com.bea.wli.sb.transports.TransportException: com.maverick.ssh.SshException: ssh-dss Key Not Found for host hostname,10.124....
com.bea.wli.sb.transports.TransportException: com.maverick.ssh.SshException: ssh-dss Key Not Found for host
at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessage(SFTPTransportProvider.java:161)
at com.bea.wli.sb.transports.sftp.connector.SFTPTransportProvider.sendMessageAsync(SFTPTransportProvider.java:111)
at sun.reflect.GeneratedMethodAccessor566.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. see log file for complete stacktrace
Caused By: com.maverick.ssh.SshException: ssh-dss Key Not Found for host eirnode2,10.124.10.16
at com.bea.wli.sb.transports.sftp.client.KnownHostVerifier.onUnknownHost(KnownHostVerifier.java:37)
at com.sshtools.publickey.AbstractKnownHostsKeyVerification.A(Unknown Source)
at com.sshtools.publickey.AbstractKnownHostsKeyVerification.verifyHost(Unknown Source)
at com.maverick.ssh2.TransportProtocol.C(Unknown Source)
at com.maverick.ssh2.TransportProtocol.processMessage(Unknown Source)
Truncated. see log file for complete stacktrace

BEA-381826 suggest that there is any issue with your public key in known_host file, can you cross verify it again. Also can you check if known_host file has appropriate permissions and I am assuming it is in /OSB_DOMAIN/osb/transports/sftp folder.
Hostname,IP algorithm publickey are the hostname, ip, and public key of SFTP server.
As per troubleshooting guidelines
The Key not found for IP, host error message indicates that the known_hosts file does not contain an entry that corresponds to the specified IP-host combination. If the entry exists, then try with another algorithm key; for example, if the earlier attempt was with an RSA key, try again with a DSA key.
Cheers,
Sahil

No object type found for the corresponding message in BPM

Hi All,
I have a BPM scenario where i pick a file and based on a condition in the Switch i send the meesage to Mail or Proxy.
When i tested the scenario i got error as "no object type found for the message check the corresponding process activated" error in the call adapter step.
I checked in sxi_cache, IP is active with 0 as return code .
When checked in sxmb_moni_bpe, under process selection it says "No workitem exists"
In SXMB_MONI, under inbound i clicked PE but got error as "Unable to perform action fro the selected Message" is displayed.
Im new to BPM so please tell me as what Im missing exactly.
Thanks

Hi Sachi,
Delete the Integration Process from ID and reimport it. Also check the status of your BPM in T Code SXI_CACHE....if return code is not '0' then re-activate your integration process..
Try REPEAT ACTIVATION on SXI_CACHE...
Have a look into this..
Re: Stuck in BPM Transformation process Async to Sync Scenario
Regds,
Pinangshuk.

BPM (IP) Error: "No object type found for this message [...]"

For your info.
I have searched SDN today for a solution to an error message found in XI message monitor (trx SXI_MONITOR) when sending a message to BPM:
<b>No object type found for this message; check the activation of the corresponding process</b>
Well, I found a lot of threads, but with no good answer for me.
So, here's my self-solution: I was just missing the Interface Determination (really don't know why) bringing from Outbound to Abstract message interface. So XI message was definitely correct.

Hi,
Make sure that the first receive step in your integratiopn process uses the abstract interface that u defin in the interface determination.
Also check if you have used all the objects that you have created. Some times 'No object type found' error happens if your BPM is not activated.
Also check the activation log and see if there are any errors. Refrech the cache in SXI_CACHE. Check if the return code is 0.
Hope this helps.
Regards.
Praveen

OC4J 10.1.2 - No XPathFactory implementation found for the object model

Hello,
We are doing some maintenance on an old 10.1.2.3.0 container. The project has to be extended with a library built with xml-apis-1.3.03.jar. I know you will suggest a upgrade, but that is a no-go - sorry, since other projects also are running on this server. So I hope some of you remember or know how to avoid or replace the oracle xml parser.
It seems like it gets the wrong XPathFactory
XPathFactory#newInstance() failed to create an XPathFactory for the default object model: http://java.sun.com/jaxp/xpath/dom
with the XPathFactoryConfigurationException: javax.xml.xpath.XPathFactoryConfigurationException: No XPathFctory implementation found for the object model:
I have searched the documentation for 10.1.2 and everything relevant on the Internet for a solution, but i seems to non-trivial when dealing with oracle xml parser. We tried to put the jar-files (xml-apis-1.3.03.jar, xercesImpl-2.8.0.jar, xalan-2.6.0.jar) in the endorsed library under the jdk, and we have already added <web-app-class-loader search-local-classes-first="true" include-war-manifest-class-path="true"/> to our orion-web.xml.
I also know that the <shared-library> tag got introduced in 10.1.3 where you easily can replace the parser.
Any ideas on how to deal with this exception or comments to the interpretation on the exception are appreciated.
-MK

Hello,
You are correct, in OracleAS 10g (10.1.2), Oracle does not expose JMX MBean server.
OracleAS 10g R3 (10.1.3) is a J2EE 1.4 container will full support for JMX, and all the JSR-77 MBeans exposed. You can also create and register your own MBeans.
Could you give us the different requirements you have around JMX for your application?
Regards
Tugdual Grall

No processor object found for key

Similar Messages

Maybe you are looking for