No progress seen in OATM migration

Hi Gurus,
I am performing OATM migration on my 11.5.10.2 applications with 10.2.0.4 database.
I see the status is 99.96% completed -
Generating Migration progress report for all schemas. Please wait...
Migration Progress Report
Report Date : April 13, 2011 PA
GE: 1
Total No. Commands Commands % completion
of commands in error in success of migration
118,161 28 118,112 99.96%
SQL> select count (*) from fnd_ts_mig_cmds where MIGRATION_STATUS='GENERATED';
COUNT(*)
5067
I see there are still 5067 commands with GENERATED status and which are yet to be executed. I have been waiting for almost a day and this 5067 count never reduces further.
I even tried to restart the queue TBLMIG_MESSAGEQUE and bounced DB, then restarted OATM utility.. no luck though.
Can some one help me on this please ?
Thanks,
Khan

Hi Helios,
The issue was fixed.
All the left over commands in GENERATED status were to Enable constraint, policy, trigger, queues, etc.
I executed the post migration script to to Enable constraint, policy, trigger, queues, etc which brought the count down.
Thanks for the response Helios.
Regards,
Khan.

Similar Messages

Oracle EBS 11.5.10.2 - OATM Migration

Hi,
One of our client has Oracle EBS 11i(11.5.10 & 9.2.0.5.0) [upgraded from 11.0.3].
We are upgrading to 11.5.10.2 & 11gR2
They didn't migrate to OATM when they upgraded from 11.0.3 to 11.5.10. There are 3 Non OATM tablespaces.
I did the OATM migration (Test Upgrade) after upgrade to 11.5.10.2 & 11gR2 as documented in Note: 404954.1. The Migration Progress Report showed the following:
Migration Progress Report
Report Date : August 17, 2011
Total No. Commands Commands % completion
of commands in error in success of migration
27,750 0 27,750 100%
Does it mean the migration is successfull?
After migration to OATM, the non-OATM tablespaces does not have any segments except SPACE HEADER(segment type) as documented in Note: 271866.1
Can I consider the Migration to OATM is done?
Rgds,
Thiru

Does it mean the migration is successfull?
After migration to OATM, the non-OATM tablespaces does not have any segments except SPACE HEADER(segment type) as documented in Note: 271866.1
Can I consider the Migration to OATM is done?Yes for both questions.
Thanks,
Hussein

OATM Migration Error Report

Hi,
I am trying to migrate to OATM on my 11.5.9.2 apps before upgrading to R12.
OATM migration progress report is showing
Total No. Commands Commands % completion
of commands in error in success of migration
80,180 5 80,037 99.82%
When i checked for the errors, it is showing below error report.
Migration Error
AMR AMR_GMD_SAMPLES_N2 INDEX X
ORA-01950: no privileges on tablespace 'APPS_TS_TX_IDX'
AMR AMR_GMF_LOT_COST_DETAILS_N1 INDEX X
ORA-01950: no privileges on tablespace 'APPS_TS_TX_IDX'
APPLSYS WF_LOCAL_USER_ROLES TABLE HZ_PARTY
ORA-12801: error signaled in parallel query server P001
ORA-01578: ORACLE data block corrupted (file # 445, block # 195035)
ORA-01110: data file 445: '/u01/orauat/uatdata/uat/applsysd14.dbf'
ORA-26040: Data block was loaded using the NOLOGGING option
Please help.
Thanks,

> Migration Error
> ------------------------------------------------------------------------------------------------------------------------------------
> AMR     AMR_GMD_SAMPLES_N2             INDEX      X
> ORA-01950: no privileges on tablespace 'APPS_TS_TX_IDX'
Please run this command and see if it helps.
SQL> alter user AMR quota unlimited on APPS_TS_TX_IDX;
ORA-01950 Error While Executing Initial Build of Opportunities and Leads Bins [ID 309664.1]
ORA-01950 AND ORA-06512 TRYING TO OPEN PERIOD [ID 1058205.6
> APPLSYS WF_LOCAL_USER_ROLES            TABLE      HZ_PARTY
> ORA-12801: error signaled in parallel query server P001
> ORA-01578: ORACLE data block corrupted (file # 445, block # 195035)
> ORA-01110: data file 445: '/u01/orauat/uatdata/uat/applsysd14.dbf'
> ORA-26040: Data block was loaded using the NOLOGGING option
Workflow Tables: ORA-01578: ORACLE data block corrupted ORA-26040: Data block was loaded using the NOLOGGING option [ID 416476.1]
How Block Corruption of Workflow Tables Can Cause Self Service Login Not to Work [ID 435523.1]
During a Backup, WF_LOCAL_ROLES Is Showing Corrupt Block [ID 369535.1]
Partitions in Workflow Local Tables are Automatically Switched to NOLOGGING [ID 433280.1]
Thanks,
Hussein

Regarding OATM Migration .

Hi ,
We are migrating our production database to OATM .
How do we make sure that all
transactions to be recoverable on it. All objects have appropriate values for the logging attribute before and after the OATM migration
process to ensure that all transactions are logged and can be recovered through media recovery .
Regards.

Can you please let us know the process we need to follow for the OATM migration with standby in place You will either need to do a failover/switchover and convert the database to OATM, or rebuild your standby application/database from the source application/database once you covert it to OATM.
Thanks,
Hussein

OATM Migration utility fails LONG column

Execute Migration Commands
Migration processes for tables with LONG and LONG RAW columns don't start in the background.
No log is generated.
In FNDTSMIG.log I found "sh: syntax error at line 1: `(' unexpected "
Any ideas ?

Hi,
See if this doc is helpful
Running OATM Migration Utility Fails With "sh: syntax error at line 1: `(' unexpected " [ID 552302.1]
Regards
Yoonas

OATM migration error

Dear ,
i run OATM migration process and i faced error :
INV MTL_MATERIAL_TRANSACTIONS TABLE X
ORA-12801: error signaled in parallel query server P003
ORA-01555: snapshot too old: rollback segment number 9 with name "_SYSSMU9$" too small
how can i solve it ?
Regards ,,,

Hi;
Please add or increase your undo and retest issue
Regard
Helios

EBS OATM Migration

Has anyone migrated a 300gb or larger database to OATM? Are there any known performance issues after the database has been migrated to OATM?

When running the tablespace creation scripts within the migration utility the crtts.sql is generated containing the sql statements below. It looks odd, since it is only creating 1 tablespace and altering the others. Shouldn't it create 12 tablespaces?
connect SYSTEM/&1@&2
exec DBMS_APPLICATION_INFO.SET_MODULE('TS_CREATE_TABLESPACE', NULL);
CREATE TABLESPACE APPS_TS_TOOLS
DATAFILE '/u01/APPS_TS_TOOLS01.dbf'
SIZE 100 M
EXTENT MANAGEMENT LOCAL UNIFORM SIZE 1024 K
SEGMENT SPACE MANAGEMENT AUTO;
ALTER TABLESPACE APPS_TS_TX_DATA ADD DATAFILE '/u01/APPS_TS_TX_DATA04.dbf' SIZE 100
M ;
ALTER TABLESPACE APPS_TS_TX_IDX ADD DATAFILE '/u01/APPS_TS_TX_IDX05.dbf' SIZE 100 M
ALTER TABLESPACE APPS_TS_SEED ADD DATAFILE '/u01/APPS_TS_SEED03.dbf' SIZE 100 M ;
ALTER TABLESPACE APPS_TS_INTERFACE ADD DATAFILE '/u01/APPS_TS_INTERFACE02.dbf' SIZE
100 M ;
ALTER TABLESPACE APPS_TS_SUMMARY ADD DATAFILE '/u01/APPS_TS_SUMMARY02.dbf' SIZE 100
M ;
ALTER TABLESPACE APPS_TS_NOLOGGING ADD DATAFILE '/u01/APPS_TS_NOLOGGING02.dbf' SIZE
100 M ;
ALTER TABLESPACE APPS_TS_ARCHIVE ADD DATAFILE '/u01/APPS_TS_ARCHIVE02.dbf' SIZE 100
M ;
ALTER TABLESPACE APPS_TS_QUEUES ADD DATAFILE '/u01/APPS_TS_QUEUES02.dbf' SIZE 100 M
ALTER TABLESPACE APPS_TS_MEDIA ADD DATAFILE '/u01/APPS_TS_MEDIA02.dbf' SIZE 100 M ;
exit;

SmallSearchInputBox not seen in the Migrated site from SP 2010 to SP 2013

We did the content database attach migration and didnt use any tool.
We reworked on the Master Page by taking the seattle.master page and put the custom placeholders.
The design came out well, but the SmallsearchInputbox is not seen in the "View All Site Content" and the Home Page.
Please help to fix this. Thanks in advance
Veena R

Hi Veena,
What did you mean by “We reworked on the Master Page by taking the seattle.master page and put the custom placeholders”?
Did you set the seattle.master page as the default master page for the migrated site?
If yes, I recommend to set the master page to be v4.master and then do visual upgrade for the migrated sites.
After that, add the custom placeholders to the seattle.master page and then check the results.
If I misunderstood, please feel free to correct me.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

OATM (Oralce Appliation Tablespace Migration) Utility is taking forever.

Hi All,
I am not sure how to finish OATM migration utility in timely manner. I can't afford days of downtime to do OATM migration. Is there any advise on doing this migration? I am running this utility right now and it is doing 2% a day. I am still waiting @ 4% done satge. Not sure how long will it take to finish?
Thanks,
-Hansal
Edited by: user10751491 on Jun 26, 2012 9:10 AM

Please post the details of the application release, database version and OS along with the hardware resources you have on the database server.
What is the procedure you follow to migrate to OATM?
Are you trying this in a test instance?
Have you reviewed all OATM docs? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=OATM&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
My OATM Migration Appears to Have Hung. How Can I Monitor It's Progress? [ID 1073783.1]
Oatm Conversion Is Hanging While Generating Migration Command [ID 445020.1]
Oatm Migration Is Running Very Long On Fnd_lobs_ctx Index For More Than 35hrs, How to speed Up This OATM Migration Step? [ID 1362261.1]
Thanks,
Hussein

CTXSYS Schema migration during OATM

We are converting to OATM as part of our upgrade from 11.5.9CU2 to R12.1.1.
When I run the OATM migration utility I see only two options when I choose migration commands option(4)
PLEASE TAKE A COMPLETE BACKUP OF THE DATABASE BEFORE MIGRATION
1. Migrate all Schemas
2. Migrate a list of Schemas
[Q]uit ack [N]ext
I Don't see the option Migrate CTXSYS Schema. We are on 10.2.0.4 db version. Is this option not available for 11.5.9? Please confirm?

Hi;
Please check below notes and see its helpful:
How to Migrate The CTXSYS Schema With Oatm ? [ID 550896.1]
FAQ - OATM - Oracle Applications Tablespace Migration [ID 418225.1]
How to run OATM migration utility [ID 404954.1]
Hope it helps
Regard
Helios

Migrating to OATM in a ASM database

Hi All,
We are on 11.5.10.2. and Db with 10.2.0.4
Can you please advice on the possibilities and any changes in the steps for OATM migration for a Database in ASM.
Oracle standard documents have steps for Non ASM database.
We are yet to migrate to ASM, we are working on the possibilities of which one can be done first.
Migration from Non ASM to ASM and then Migration to OATM ( or ) Migration to OATM and then Migration from Non ASM to ASM
Please advice on the best possible approach
Thanks & Regards,
Rakesh

Hi Hussein,
Have raised an SR to get the oracle support responce on having OATM migration in a ASM database.
Have another query....
Current tablespaces have the segment_space_management as Manual, we are planning to change this to Auto during the OATM migration except for some 4 to 5 Modules where the segments are huge and lots of transaction will be going on for those ( Heavily used modules ).
Those schemas alone we are planning to have uniform extent in seperate tablespaces.
Verified the oracle system administrator guide for this and it has mentioned about changing the complete APPS_TS_TX_DATA to APPS_TS_TX_DATA_1MB. But we want to have the 200+ oracle registered schema in APPS_TS_TX_DATA ( segment management auto ) and 5 oracle registered schema in a another set of tablespaces ( Segment management uniform )
I guess recommended segment space management is Uniform, as i have mentioned earlier there are many tables/indexes which are huge 100G plus, currently the next extent of these objects are 10M plus. So while migrating to OATM we should have these in 10M+ uniform extent to avoid performance issue or we can have in 1 M uniform extent.
Can you please advice on how can we achieve this and is there any draw back in this.
Thanks & Regards,
Rakesh

OATM stucks on fnd_lobs table

Hello,
We use 10gR2 DB and 11i application version.
I ran the migration utility, and the progress is stuck with 99.24% with one OATM utility process cmd window. (the one with the DO NOT CLOSE label).
I started the execution of the migration commands yesterday around 16:45. since about 23:00 until now (16:00) the process is on the 99.24% mark.
I queried the fnd_ts_mig_cmds table in the following way:
select * from fnd_ts_mig_cmds where start_date is not null and end_date is null
and I get one row (I wrote only relevant info):
start_date
16:51
owner
APPLSYS
OBJECT_NAME
FND_LOBS
OLD_TABLESPACE
APPLSYSD
NEW_TABLESPACE
APPS_TS_MEDIA
MIGRATION COMMAND
ALTER TABLE "APPLSYS"."FND_LOBS" MOVE TABLESPACE APPS_TS_MEDIA LOB (FILE_DATA) STORE AS (TABLESPACE APPS_TS_MEDIA CHUNK 8192 NOCACHE) NOPARALLEL NOLOGGING
So from that and from GRID control , I understand that the process is stuck on this table - for almost 24 hours.
Does anyone else have this problem? Can anyone suggest what can I do?
Thank you!

Hi;
Is there any other message at alert.log? PLease see:
Oatm Conversion Is Hanging While Generating Migration Command [ID 445020.1]
My OATM Migration Appears to Have Hung. How Can I Monitor It's Progress? [ID 1073783.1]
Also see:
OATM is failing with ORA-01652: unable to extend temp segment by 16 in tablespace APPS_TS_MEDIA [ID 341285.1]
Regard
Helios

OATM conversion - should I use unform or auto allocated extents

Hi, as part of an 11i to R12 E-Biz upgrade, I am migrating to the OATM model of tablespaces. One issue I am not sure about is whether to create the new OATM tablespaces so that they use Uniform Extents or whether I should set them to use Auto Allocate. I appreciate that some folk believe Auto Allocate can in the long run lead to freespace fragmentation. However I have not seen any recommendation from Oracle in any of the upgrade documentation as to which method of extent allocation to use.
Q1. Any ideas on which is the recommended / better / wiser extent allocation method to use ?
Q2. Are the concerns around free space fragmentation with the Auto Allocate method really likely ?
Also when I ran the Sizing Report in the OATM migration utility against my existing non OATM 11i tablespaces to predict the space I required for the migration, I got very different results / predictions !
For Uniform Extent Allocation I got the following prediction
Required 20% buffer Current
======= ======= =====
Total(in KB): 83,552,256 100,261,687 31,653,400
For Auto Allocate I got the following prediction
Required 20% buffer Current
======= ======= =====
Total(in KB): 29,842,048 35,809,437 31,653,400
Q3. Any idea why there is such a large variation between the predicted figures for both methods ?
any insight or shared thoughts greatly appreciated,
Jim

Thanks Hussein,
The notes indicate that the recommendation for OATM is Uniform Extnts of 128 Kb. However it caveats that with the statement "if that suits your database". How are you meant to pre-determine what extent size suits your current data / database ?
Also when I ran the pre-sizing report in the OATM migration utility I got vastly different space predictions ( see below ) when proposing to use Uniform Extent Allocation ( of 128 Kb ) and Auto Allocate. Do you know why there should be such a large difference in the figures ( especially as the recommended Unform Extent allocation is so much larger ! )
For Uniform Extent Allocation
==================
Required 20% buffer Current
Total(in KB): 83,552,256 100,261,687 31,653,400
For Auto Allocation
============
Required 20% buffer Current
Total(in KB): 29,842,048 35,809,437 31,663,600

Issue with LCM while migrating planning application in the cluster Env.

Hi,
Having issues with LCM while migrating the planning application in the cluster Env. In LCM we get below error and the application is up and running. Please let me know if anyone else has faced the same issue before in cluster environment. We have done migration using LCM on the single server and it works fine. It just that the cluster environment is an issue.
Error on Shared Service screen:
Post execution failed for - WebPlugin.importArtifacts.doImport. Unable to connect to "ApplicationName", ensure that the application is up and running.
Error on network:
“java.net.SocketTimeoutException: Read timed out”
ERROR - Zip error. The exception is -
java.net.SocketException: Connection reset by peer: socket write error
at java.net.SocketOutputStream.socketWrite0(Native Method)
at java.net.SocketOutputStream.socketWrite(SocketOutputStream.java:92)
at java.net.SocketOutputStream.write(SocketOutputStream.java:136)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)

Hi,
First of all, if your environment for source and target are same then you will have all the users and groups in shared services, in that case you just have to provision the users for this new application so that your security will get migrated when you migrate the from the source application. If the environs are different, then you have to migrate the users and groups first and provision them before importing the security using LCM.
Coming back to the process of importing the artifacts in the target application using LCM, you have to place the migrated file in the @admin native directory in Oracle/Middleware/epmsystem1.
Open shared services console->File system and you will see the your file name under that.
Select the file and you will see all your exported artifacts. Select all if you want to do complete migration to target.
Follow the steps, select the target application to which you want to migrate and execute migration.
Open the application and you will see all your artifacts migrated to the target.
If you face any error during migration it will be seen in the migration report..
Thanks,
Sourabh

Data Migration of FI-CA Cleared Items

Hi,
Currently I am working on a Data Migration project to migrate data from our FI-CA module on ERP 4.7 to ECC 6.0.
THere has been a request from the business to migrate historical data (e.g. Cleared items).
Is there a SAP recommended approach or tools to load this data into the target environment?
Currently all documentation around SAP data migrations talks about stategies for open item data migration however I have seen nothing arouund migrating historical financial data.
Is this because it is not recommended or technically impossible?
Regards
Adam Gunn

That BAPI is used typically for straight out vanilla GL, AR, AP postings, however you still have to create the other side of the entry and then clear it.
I need to be able to migrate full history, which means from an FI-CA viewpoint:
1. Migrate FI-CA posting of liability against BP/contract account.
2. Migrate associated payments.
3. And then clearing documents.
Basically the requirement is to represent the historical data in the new system as if it was posted and matched off.
Is there a technical way to do this?
OR,
Do you migrate the FI-CA liabilties, then the associated payments and then run clearing on the target system?
I suspect this is almost an impossible data migration requirement as development of the extraction and load process would be extremely complex and testing would take months to cover all posting scenarios in FI-CA. However, I would be interested if anyone has attempted to do this before.
Adam

No progress seen in OATM migration

Similar Messages

Maybe you are looking for