No Project IMG has been defined for Starting Reference IMG SOLMAN ERROR

Hi All,
I created a off release project in prodcution and assigned logical compenents. When I am trying to create a IMG object for SPRO it is showing an error stating that "No Project IMG has been defined for Starting Reference IMG ". when I click Ok button it is showing another message ""Screen output without connection to user.". I Verified in project administration(solar_project_admin)> System Landscape>IMG projects, status for distributing IMG projects to component systems is showing in Red color. No IMG projects have been distributed into the system.
RFC connections are showing are correctly. I am not able to find the problem and solution. Could any one help me to figureout the problem and what needs to be done
Thanks in advance,
Sreekala Rapuru.

Is it mandatory that i need to create a project view?
I have created a view "activity necessity", but not have selected any of the check boxes in "mandatory/optional/nonrequired". As well i havent generated it. I can do the "configure" now without errors
my question is - is there anything critical which is related to this views? I went through the help page you sent me.. Is this for creating the implementation guide? any guidelines you can send me about this is highly appreciated.
thanks!

Similar Messages

No Project IMG has been defined for "logical compt". Starting Reference IMG

Hi,
I have my logical component setup, and have my DEV system added. I have the BPH setup, and is trying to do configuration. when i select an IMG and click on "configure" i am getting the following error, but it takes me to the IMG
Error:
"No Project IMG has been defined for Z_LOGIC_COMPT. Starting Reference IMG"
I went and checked in solar_project_admin, system landscape/project/IMG. Selected the development system from the "system role for IMG projects". I can see it in RED. How can i generate this? I guess its because of this, am getting the error above
Thanks!

Is it mandatory that i need to create a project view?
I have created a view "activity necessity", but not have selected any of the check boxes in "mandatory/optional/nonrequired". As well i havent generated it. I can do the "configure" now without errors
my question is - is there anything critical which is related to this views? I went through the help page you sent me.. Is this for creating the implementation guide? any guidelines you can send me about this is highly appreciated.
thanks!

APP-PO-14258 no rate has been defined for this date

Hi,
When we are trying to receipt an error is appearing
APP-PO-14258 no rate has been defined for this date
Cause The rate type that you have entered uses pre-defined rates. No rate has been defined for the currnet rate type and rate date combination.
Action: Enter a rate date for which a rate has been defined
Please assist me.

Are you using foriegn currency?
If yes, You have to define exchange rate for that date.

No quality notification type has been defined for inspection type 89

Hi
When I am creating a manual inspection lot and want to create a quality notification it gives me this error "No quality notification type has been defined for inspection type 89" where do I assign the notifications to the inspection lot.???
I want to know where do I configure it??
Regards
Suresh

Hi
Path for assigning the Qualtiy notification type to Qualtiy inspection type:
SPRO--> Qualtiy Mangement --> Qualtiy inspection --> Inspection lot creation -->
Maintain Inspection types.
Select the inspection type and goto details screen
You can find notification type field in the details.Give the value and Save.
Regards
Ramakrishna

Output type config error:No communication data has been defined for transmi

Hi Gurus,
i have copied an existing output type ZOCT to ZORD . when i change the sales order the output is automatically triggered but is not processed successfully instead it is in red. when i see the processing log i could see the error below.
green Object 0000000133
green Output type: UK Sales Order
green Processing log for program RSNASTED routine ALE_PROCESSING
   RED   No partner profiles (message control) maintained
I tried adding communication data in VV11 but i get the below error.
No communication data has been defined for transmission medium A
Message no. VK603.
I am using ordrsp and orders05 in partner profiles and in message control tab i am giving
V1 ZORD SD10 values.
Please suggest me to correct these errors. Your help is much appreciated.Thanks.
Regards.
Sanjeev

Hi V V Reddy,
Thanks a lot for your inputs. I have debugged the program rsnasted at routines and in EDP12 there were repeated entries .
So i deleted all the partner profiles and created and generated them agian.
I have also missed to maintain SP partner function in output type partner functions. I do not see any errors now.
Thank you very much.
Regards,
Sanjeev

This bug has been around for over a year: SecurityError: Error #2123: Security sandbox violation

Hi,
The bug of 'SecurityError: Error #2123: Security sandbox violation: BitmapData.draw: file:///xxx/xxx.swf cannot access rtmfp://fms4.acrobat.com/cocomo/na2-sdk-xxx/xxx. No policy files granted access.' was first reported in lccs forum over a year ago:
http://forums.adobe.com/message/2803074
But the bug is still around. The bug can be generated by calling BitmapData.draw() on a flash.media.Video object which is attached to a p2p stream. It looks like the solution is to have the publisher to call:
send("|RtmpSampleAccess", true, true)
on the NetStream object _before_ the subscriber calls NetStream.play(), in order to give the permission to subscribers for audio and video streams.
In lccs library, the above permission authorisation happens in WebcamPublisher:
protected function onNetStatus(p_evt:NetStatusEvent):void
if (p_evt.info.code=="NetStream.Connect.Success") {
setTimeout(sendSnapShotPermission, 500);
_stream.send("|RtmpSampleAccess", true, true);
protected function sendSnapShotPermission():void
_stream.send("|RtmpSampleAccess", true, true);
but it doesn't help the problem. In fact, it is not clear to me when this 'snap shot permission' is sent to the subscriber.
One more note: This is not a critisism for the lccs development quality, but rather a question on how ready lccs is for production use. After encountering this bug, I had to go through the lccs code (the open source parts), and found out that the library is not really written, well, carefully, and it is full of temporary quick-n-dirty fixes.
For instance in the above example, sendSnapShotPermission() is called after 500 milliseconds, probably to allow something to happen before calling the method, but how can you be sure that it will happen in 500 milliseconds? Probably,an event listener should have been used. Immediately in the next line, we see:
_stream.send("|RtmpSampleAccess", true, true);
which is a duplicate of sendSnapShotPermission(). many examples like this can be found throughout the library.
Aureliano

Hi Nigel,
Two questions:
1. When the publisher sends the access permission to the subcriber by:
netStream.send("|RtmpSampleAccess", true, true)
, on the subscriber side, what event or function can handle the guaranteed receipt of the access permission? Currently it is possible to draw the incoming stream video upon receiving NetStream.Play.Star and waiting for 5 seconds or so:
public class MyWebcamSubscriber extends WebcamSubscriber {
override protected function layoutCameraStreams():void
// trying the event listener seems to work here.
_streamManager.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
override protected function onNetStatus(e:NetStatusEvent):void
super.onNetStatus(e);
case "NetStream.Play.Start":
setTimeout(function():void {
// draw the video from the incoming stream here.
}, 5000);
The questions is, which event can let the subscriber know that it has the access permission to the video stream?
2. In WebcamPublisher, why is that the access permission is sent 3 times?
a. Once on receiving NetStream.Connect.Success with 0.5 second delay, as in below.
b. Once immediately upon receiving NetStream.Connect.Success, as in below.
protected function onNetStatus(p_evt:NetStatusEvent):void
if (p_evt.info.code=="NetStream.Connect.Success") {
setTimeout(sendSnapShotPermission, 500);
_stream.send("|RtmpSampleAccess", true, true);
protected function sendSnapShotPermission():void
_stream.send("|RtmpSampleAccess", true, true);
c. Once in onConnectionTypeChange() with 2 seconds delay:
protected function onConnectionTypeChange(p_evt:StreamEvent):void
if ( _streamManager.isP2P) {
_stream= new NetStream(_connectSession.sessionInternals.session_internal::connection as NetConnection,NetStream.DIRECT_CONNECTIONS);
setTimeout(sendSnapShotPermission, 2000);

JDev : No accelerator for import assistance has been defined

Hi,
I am using JDeveloper 11g (11.1.1.6.0) but import assistance is not working and its saying "*No accelerator for import assistance has been defined*". I am on Windows 8 64 bit OS. Do we know how to fix it ?
Thanks,
Abhi

Timo Hahn wrote:
Well, you can remove or rename the system11.1.1.x.x.x folder which hold all properties. Next time you start jdev the folder is recreated with default settings. All your changes are lost.
For more info http://tompeez.wordpress.com/2011/08/13/how-to-find-and-reset-the-system11-x-x-x-folder-for-a-jdeveloper-installation/
TimoThanks Timo, it solves my issue.

I'm trying to sync my Iphone 3gs and my home computer has been down for about 2 months. I have my computer fixed now, and went to update/sync my phone and it tells me "Your apple mobile device service is not started" How do I fix this?

I'm trying to sync my phone. My computer has been down for a few months. I go to try to sync it today, and it tells me my Apple Mobile Device service is not started. How do I fix this? I dont know where to check for what operating system I'm on.

See Here
AMDS for Windows
http://support.apple.com/kb/TS1567
AMDS for Mac
http://support.apple.com/kb/ht1747

No expense type for estimated costs has been defined

Hi SAP guru,
My client wanna check budget from travel request. Check budget through Funds Management already available when post travel expense before posting to FI however they need on the travel request.
I read the documentation, it could be happen when approval the travel request. The problem is travel request used the activity, and try to enter the estimated cost as value.
When we enter the estimated cost, system refused with error message:
No expense type for estimated costs has been defined. Cannot save
Message no. PTRA_WEB_INTERFACE174
How to link the expense type to estimated cost?
or how is the scenario in order we can check budget from travel request?
any kind help will be appreciate,
dewi

Hello Dewi,
If you have the funds management active, you need to go to
maintainance view V_T706B1 and create an expense type for which
you choose out of the 'special use' drop down box the value
'estimated cost, no reimbursement'.
Background: When saving a travle request we build up a commitment
for the estimated cost. This is new functionality.
Regards,
Raynard

HT1349 My ipad will not start up, it has the swirl in the center of the screen and has been there for 30hrs now.

My ipad will not start up, it has the swirl in the center of the screen and has been there for 30hrs now, what can I do?

First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

30" has been flickering for months on start-up until warmed up. Also, brightness won't stay on, but cycles down repeatedly.

30" has been flickering for months on start-up until warmed up. Also, brightness won't stay on, but cycles down repeatedly.

OK, I tried setting Energy Savings to 1 minute. The Mac shut down and would not power back up via the power button, had to pull power plug. So it seems to be tied to the Energy settings.

Project Managers to know when a task has been updated for the last time

Hi,
I would like know if there is any timestamp feature in Project Server 2007, so that it can be possible for Project Managers to know when a task has been updated for the last time.
Thanks in advance

Hi,
If you are using the My Tasks to drive the task updates then you can use the 'Applied Requests and Errors' available under 'Go To' in the Task Updates area. Here the PM can find when requests have been approved and how many updates he/she received for a
particular task (by clicking the task name) etc.
Hope this helps
Paul

Order type 'OR' has not been defined for sales area (IDOC related)

Hi,
iam getting the status error as order type 'OR' has not been defined for sales area for ORDERS inbound idoc(it's in status 51),i looked at EDPAR(voe4) table and edsdc(voe2) tables, the sales area has been defined, i don't know why iam still getting this error. please let me know if anyone have any idea or faced any kind of this problem.
Thanks

Hi,
I believe this is nothing to do with the setting the IDOC value..Some config is missing...
Check to make sure if there is a record found in the view V_TVAKZ for the combination..
IF not check with your function consultant regarding this..
Thanks,
Naren

No accelerator for import assistance has been defined

Has anyone see this message in Jdeveloper? I am using JDeveloper 11.1.1.4.0 and recently I cannot import class in code editor, what should I do?
"No accelerator for import assistance has been defined."

I have opened a new thread for the issue.
JDev : No accelerator for import assistance has been defined
Thanks,
Abhi
Edited by: user10715262 on Feb 10, 2013 2:59 AM

I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working! I am having a hard time getting it started again, need help!

I have Lookout 6.5 running with Windows 7, the process has been running for about 2 months with no problems, but today the Citadel stopped working!
How could this have happened and what can I do to get it running again?

Didnt realize there was a response, late getting back to you.
Save your process files outside of the NI progam directory (you should have external backups already right ). THey should not be deleted.
Any customizations to the lookout.ini and lookout.sec file may be lost.
Mike
Forshock - Consult.Develop.Solve.

No Project IMG has been defined for Starting Reference IMG SOLMAN ERROR

Similar Messages

Maybe you are looking for