No prompt for response file

Everyone at my office got new computers and upgraded software. So I am currently working with Adobe Reader XI and Adobe Acrobat 9 Pro.
I created a distributed form before the upgrade and now when I get responses back there is no prompt for the response file. I had recieved and saved about 6 before any changes were made, and have about 9 pending (don't know how to get them to the responses file). I am expecting about 600 so I need to figure this out NOW.
Any advice? Has this happened to anyone else? I am wondering if I need to create a new distributed form and email it out to everyone? I am trying to avoid that since I have already sent it out to all personnel here in my office more than once.
Thanks in advance!!

I FIGURED IT OUT!!
so i booted my windows partion and ran the file it said i needed x-vid codec. so i googled it and found that there was a program that has the codec its even got a video on how to do it. its perian
http://perian.org/#download
its so simple its briliant

Similar Messages

How to programmatically disable prompts for output file names in Acrobat X

My code to programmatically disable output file names (below) is not working on a Windows 7 64-bit machine using Acrobat Distiller X. It works perfectly on a Windows XP machine with Acrobat Distiller 8.
The latest API Reference I was able to find is dated June 2008. My logic follows this convention.
I have confirmed that the registry key is updated as specified below. I have also confirmed that I am able to write to the directory indicated.
Please provide any suggestions to resolve.
Thank You!
~Lori
'Create the Registry Key where Acrobat looks for a file name
        CreateNewRegistryKey HKEY_CURRENT_USER, _
                     "Software\Adobe\Acrobat Distiller\PrinterJobControl"
'Put the output filename (FilePath) where Acrobat could find it
        SetRegistryValue HKEY_CURRENT_USER, _
                 "Software\Adobe\Acrobat Distiller\PrinterJobControl", _
                 C:\Program Files (x86)\Microsoft Office\Office12\MSACCESS.EXE, _
                 T:\PDF Files\Current Week\NFS_Lori,Test.pdf

I remember seeing that the problem is thunking. A little more specifically, because it's a 32-bit driver but a 64-bit executable, there's a 32-bit system spooler process which will always show up as the EXE name.

Logon Prompt for linked files

We are linking to HTML pages that are not native to the portal. When an end user clicks on the link they are asked to enter their KM id and password even though they are already logged it. Is there a way to prevent this from happening?

hi
first build the trust relationship between sender and reciever if they are in different domains as well if possible SSO and also check the authentication mechanism in native site and if any firewall is involved you need to open its port for this portal to access.hope this helps you.
with Regards
subrato kundu

Did JWS prompt for file associations in 1.5?

I have a vague memory of running a sandboxed app. that claims file associations, and being pleased to see a prompt asking whether I (as a user) actually wanted to make the file association.
That was in 1.5. I just tried the same app. again in 1.6 (it is my [sandboxed demo of the JNLP API file services|http://pscode.org/jws/filetest-sandbox.jnlp]) and although I was prompted for 'desktop integration' (it also suggests a desktop shortcut) there was no prompt for the file association.
You can get the build files at the [page that describes the file service|http://pscode.org/jws/api.html#fs].
Is my memory faulty? Has there been a change in the way file associations are handled?
Edit 1:
I forgot to add. The file type claimed is '.zzz'. A normal '.txt' file renamed to '.zzz' will open in my little demo just fine (tested it just then). So the file association is successful, it is just that I was not prompted, that bothers me.
Edited by: AndrewThompson64 on Sep 8, 2008 4:00 PM

I have exactly the same issue affecting InDesign and Illustrator. Photoshop had the same issue but it allowed you to set the default program. It seems the only way to do it is to open the program and open the document from there. This is a complete pain!

Safari 5 stopped prompting for file name when downloading.

Hello,
On Safari 4, when I clicked a download link, Safari always prompted for a file name, so I could change it before starting downloading, I installed Safari 5 and "this" feature dissapeared. Can anyone help?
Thank you in advance,
Alex

Works for me: Right-click on the Paint.NET download file here. http://www.dotpdn.com/downloads/pdn.html
It opens a menu. I click Download Linked File As... and change the name. It downloads.
What experience are you seeing?

Ask for the file name when printing on XP x64

I have just installed my CS3 on Windows XP x64. Installation was successful and all is working fine. But there are few things which are working differently and I can not find any way to fix it.
One of the problems I have is that I can not have it so that I will be asked for the name of the PDF file created. It simply goes through and allocates name of the file used for printing. It happens for all applications i.e. Word, Excel, InDesign, Corel. In my automatic processes I realy need to be prompted for the file name / location. Is it possible to modify some settings to have it under XP x64 ??? I hope it is.
Thanks for advise.
Tony

I would like to add few details which may help to find the source of the problem.
When I will select Adobe PDF as a printer, then click on Properties and select
Prompt for Adobe PDF filename
in Adobe PDF Output Folder then printing starts and will not progress at all. If I will change the Adobe PDF Output Folder to local it prints OK but is not asking for the file name / destination.
How I can have it printing and asking for the file name / destination ? Or maybe on XP x64 it is not possible at all ?
Regards,
Tony

Oracle 9.2.0.1 Standard Edition Silent Installation using Response file

Does Oracle 9i Standard Edition come in 3 CDs??. I heard problems about providing response files to silent install Oracle 9.2.0.1 server.
I am about receive a licensed copy of Oracle 9i and I am looking at creating a response file for silent installation.
Is it necessary to copy contents of 3 CDs into one location on a harddrive on our users Server inorder for response file to work???
We will be installing Oracle 9.2.0.1 on Win2000 server.
I really appreciate any help.
Thanks

Hi,
I'm going to work on this subject in the next few weeks on a Oracle Personal v9.2.0.1.0.
I'll try to give you some informations if I can find something helpful for you.
Can you please tell me if you have some informations on your side.
Thanks.

JSF error message: Automatic prompting for file download

This is a weird problem. I have a JSF application wherin I popup a new window on a submit button.
The window opens a test.jsf page that redirects the output to a servlet1.
Servlet then based on some parameters does a sendRedirectI() to different servlets out of context.
Now the issue is that when the output is redirected to out of context servlet, that returns a file download.
If in IE browser, if one does not do a setting of "Automatic prompting for file download", this window that I had opened on submit buttton vanishes in a jiffy. If the IE setting is done, it shows the file download correctly.
I would want to show the user some kind of message by which he/she understands that this IE setting has to be done.
I have tried several ways:
1. Javascript: window.onbeforeunload on the test.jsf so that when the window unloads i can show some message. But since test.jsf forwards to servlet1, the html page generated does not show my script.
2. I also tried checking if some windows registry can help me understand the setting.
3. I tried writing in response object the javascript and then redirecting it to servlet out of context. But I guess sendRedirect() does a new request, so this did not help.
Can anyone help? I am not sure if I am able to explain my problem correctly.
Yani

Here is the result.I used your code and it worked fine with IE setting Enabled. But when I tried to access the download servlet after opening a new window, it doesnt download the file.

Prompt for downloadig a PPT-File from KM

Hi,
we´re using Netweaver 2004 with Stack 18.
When I try to opend a PPT-File (Office 2000 and 2003) direct from the portal, I get a prompt for download or open the file.
How can I open a PPT-File from the portal without this prompt ?
Thx for help !
Oliver

Hi Oliver,
(a) You must have the MS Office plugin working within IE (do you have? Does opening other PPT over the internet within IE work?)
(b) The HTTP response delivering the PPT must provide the "right" content-type. You didn't write from where you download the PPT. From KM? From an self-developed application? To determin the correct content-type HTTP header, see (a) (where it works on the internet), check the content-type there. And if you have any influence to set the content-type header of the download in question, set it to the same value.
Hope it helps
Detlev

3?'s: Message today warning lack of memory when using Word (files in Documents) something about "idisc not working" 2. Message week ago "Files not being backed up to Time Capsule"; 3. When using Mac Mail I'm prompted for password but none work TKS - J

3 ?'s:
1 Message today warning lack of memory when using Word (files in Documents) something about "idisc not working"
2. Message week ago "Files not being backed up to Time Capsule";
3. When using Mac Mail I'm prompted for password but none work
Thanks - J

Thanks Allan for your quick response to my amateur questions.
Allan:     I'm running version Mac OS X Version 10.6.8     PS Processor is 2.4 GHz Intel core 15
Memory 4 gb 1067   MHz DDr3 TN And @ 1983-2011 Apple Inc.
I just "Updated Software" as prompted.
Thanks for helping me!    - John Garrett
PS.
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro6,2
Processor Name:          Intel Core i5
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MBP61.0057.B0C
SMC Version (system):          1.58f17
Serial Number (system):          W8*****AGU
Hardware UUID:          *****
Sudden Motion Sensor:
State:          Enabled
<Edited By Host>

Sample Response File for Oracle Database 12c Standard Edition on Oracle Linux 6.4 -- working

oracle@styles-and-artists-development-oracle database]$ cat response/db_install.rsp
## Copyright(c) Oracle Corporation 1998,2013. All rights reserved.##
## Specify values for the variables listed below to customize     ##
## your installation.                                             ##
## Each variable is associated with a comment. The comment        ##
## can help to populate the variables with the appropriate        ##
## values.                                                        ##
## IMPORTANT NOTE: This file contains plain text passwords and    ##
## should be secured to have read permission only by oracle user ##
## or db administrator who owns this installation.                ##
# Do not change the following system generated value.
oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v12.1.0
# Specify the installation option.
# It can be one of the following:
#   - INSTALL_DB_SWONLY
#   - INSTALL_DB_AND_CONFIG
#   - UPGRADE_DB
oracle.install.option=INSTALL_DB_AND_CONFIG
# Specify the hostname of the system as set during the install. It can be used
# to force the installation to use an alternative hostname rather than using the
# first hostname found on the system. (e.g., for systems with multiple hostnames
# and network interfaces)
ORACLE_HOSTNAME=styles-and-artists-development-oracle
# Specify the Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=oracle
# Specify the location which holds the inventory files.
# This is an optional parameter if installing on
# Windows based Operating System.
INVENTORY_LOCATION=/home/oracle/oracleInventory
# Specify the languages in which the components will be installed.
# en   : English                  ja   : Japanese
# fr   : French                   ko   : Korean
# ar   : Arabic                   es   : Latin American Spanish
# bn   : Bengali                  lv   : Latvian
# pt_BR: Brazilian Portuguese     lt   : Lithuanian
# bg   : Bulgarian                ms   : Malay
# fr_CA: Canadian French          es_MX: Mexican Spanish
# ca   : Catalan                  no   : Norwegian
# hr   : Croatian                 pl   : Polish
# cs   : Czech                    pt   : Portuguese
# da   : Danish                   ro   : Romanian
# nl   : Dutch                    ru   : Russian
# ar_EG: Egyptian                 zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk   : Slovak
# et   : Estonian                 sl   : Slovenian
# fi   : Finnish                  es_ES: Spanish
# de   : German                   sv   : Swedish
# el   : Greek                    th   : Thai
# iw   : Hebrew                   zh_TW: Traditional Chinese
# hu   : Hungarian                tr   : Turkish
# is   : Icelandic                uk   : Ukrainian
# in   : Indonesian               vi   : Vietnamese
# it   : Italian
# all_langs   : All languages
# Specify value as the following to select any of the languages.
# Example : SELECTED_LANGUAGES=en,fr,ja
# Specify value as the following to select all the languages.
# Example : SELECTED_LANGUAGES=all_langs
SELECTED_LANGUAGES=en
# Specify the complete path of the Oracle Home.
ORACLE_HOME=/extended2/oracleBase/db12c1
# Specify the complete path of the Oracle Base.
ORACLE_BASE=/extended2/oracleBase
# Specify the installation edition of the component.
# The value should contain only one of these choices.
#   - EE     : Enterprise Edition
#   - SE     : Standard Edition
#   - SEONE : Standard Edition One
#   - PE     : Personal Edition (WINDOWS ONLY)
oracle.install.db.InstallEdition=SE
# PRIVILEGED OPERATING SYSTEM GROUPS                                          #
# Provide values for the OS groups to which OSDBA and OSOPER privileges       #
# needs to be granted. If the install is being performed as a member of the   #
# group "dba", then that will be used unless specified otherwise below.       #
# The value to be specified for OSDBA and OSOPER group is only for UNIX based #
# Operating System.                                                           #
# The DBA_GROUP is the OS group which is to be granted OSDBA privileges.
oracle.install.db.DBA_GROUP=osdba
# The OPER_GROUP is the OS group which is to be granted OSOPER privileges.
# The value to be specified for OSOPER group is optional.
oracle.install.db.OPER_GROUP=osoper
# The BACKUPDBA_GROUP is the OS group which is to be granted OSBACKUPDBA privileges.
oracle.install.db.BACKUPDBA_GROUP=bckdba
# The DGDBA_GROUP is the OS group which is to be granted OSDGDBA privileges.
oracle.install.db.DGDBA_GROUP=dbdba
# The KMDBA_GROUP is the OS group which is to be granted OSKMDBA privileges.
oracle.install.db.KMDBA_GROUP=kmdba
#                               Grid Options                                  #
# Specify the type of Real Application Cluster Database
#   - ADMIN_MANAGED: Admin-Managed
#   - POLICY_MANAGED: Policy-Managed
# If left unspecified, default will be ADMIN_MANAGED
oracle.install.db.rac.configurationType=
# Value is required only if RAC database type is ADMIN_MANAGED
# Specify the cluster node names selected during the installation.
# Leaving it blank will result in install on local server only (Single Instance)
# Example : oracle.install.db.CLUSTER_NODES=node1,node2
oracle.install.db.CLUSTER_NODES=
# This variable is used to enable or disable RAC One Node install.
#   - true : Value of RAC One Node service name is used.
#   - false : Value of RAC One Node service name is not used.
# If left blank, it will be assumed to be false.
oracle.install.db.isRACOneInstall=
# Value is required only if oracle.install.db.isRACOneInstall is true.
# Specify the name for RAC One Node Service
oracle.install.db.racOneServiceName=
# Value is required only if RAC database type is POLICY_MANAGED
# Specify a name for the new Server pool that will be configured
# Example : oracle.install.db.rac.serverpoolName=pool1
oracle.install.db.rac.serverpoolName=
# Value is required only if RAC database type is POLICY_MANAGED
# Specify a number as cardinality for the new Server pool that will be configured
# Example : oracle.install.db.rac.serverpoolCardinality=2
oracle.install.db.rac.serverpoolCardinality=
#                        Database Configuration Options                       #
# Specify the type of database to create.
# It can be one of the following:
#   - GENERAL_PURPOSE/TRANSACTION_PROCESSING
#   - DATA_WAREHOUSE
oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
# Specify the Starter Database Global Database Name.
oracle.install.db.config.starterdb.globalDBName=cbd
# Specify the Starter Database SID.
oracle.install.db.config.starterdb.SID=cdb1
# Specify whether the database should be configured as a Container database.
oracle.install.db.ConfigureAsContainerDB=true
# Specify the Pluggable Database name for the pluggable database in Container Database.
oracle.install.db.config.PDBName=pdb1
# Specify the Starter Database character set.
# One of the following
# AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2,
# EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257,
# BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6,
# AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8,
# IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE,
# KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950,
# ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258
oracle.install.db.config.starterdb.characterSet=AL32UTF8
# This variable should be set to true if Automatic Memory Management
# in Database is desired.
# If Automatic Memory Management is not desired, and memory allocation
# is to be done manually, then set it to false.
oracle.install.db.config.starterdb.memoryOption=true
# Specify the total memory allocation for the database. Value(in MB) should be
# at least 256 MB, and should not exceed the total physical memory available
# on the system.
# Example: oracle.install.db.config.starterdb.memoryLimit=512
oracle.install.db.config.starterdb.memoryLimit=512
# This variable controls whether to load Example Schemas onto
# the starter database or not.
oracle.install.db.config.starterdb.installExampleSchemas=true
# Passwords can be supplied for the following four schemas in the             #
# starter database:                                                           #
#   SYS                                                                       #
#   SYSTEM                                                                    #
#   DBSNMP (used by Enterprise Manager)                                       #
# Same password can be used for all accounts (not recommended)                #
# or different passwords for each account can be provided (recommended)       #
# This variable holds the password that is to be used for all schemas in the
# starter database.
oracle.install.db.config.starterdb.password.ALL=CDBadmin12345#
# Specify the SYS password for the starter database.
oracle.install.db.config.starterdb.password.SYS=CBDsys12345#
# Specify the SYSTEM password for the starter database.
oracle.install.db.config.starterdb.password.SYSTEM=PDBsys12345#
# Specify the DBSNMP password for the starter database.
oracle.install.db.config.starterdb.password.DBSNMP=DBsnmp12345#
# Specify the PDBADMIN password required for creation of Pluggable Database in the Container Database.
oracle.install.db.config.starterdb.password.PDBADMIN=PDBadmin12345#
# Specify the management option to use for managing the database.
# Options are:
# 1. CLOUD_CONTROL - If you want to manage your database with Enterprise Manager Cloud Control along with Database Express.
# 2. DEFAULT   -If you want to manage your database using the default Database Express option.
oracle.install.db.config.starterdb.managementOption=DEFAULT
# Specify the OMS host to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.omsHost=
# Specify the OMS port to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.omsPort=
# Specify the EM Admin user name to use to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.emAdminUser=
# Specify the EM Admin password to use to connect to Cloud Control.
# Applicable only when oracle.install.db.config.starterdb.managementOption=CLOUD_CONTROL
oracle.install.db.config.starterdb.emAdminPassword=
# SPECIFY RECOVERY OPTIONS                                                    #
# Recovery options for the database can be mentioned using the entries below #
# This variable is to be set to false if database recovery is not required. Else
# this can be set to true.
oracle.install.db.config.starterdb.enableRecovery=true
# Specify the type of storage to use for the database.
# It can be one of the following:
#   - FILE_SYSTEM_STORAGE
#   - ASM_STORAGE
oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE
# Specify the database file location which is a directory for datafiles, control
# files, redo logs.
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=/extended1/db/data
# Specify the recovery location.
# Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=/extended1/db/recovery
# Specify the existing ASM disk groups to be used for storage.
# Applicable only when oracle.install.db.config.starterdb.storageType=ASM_STORAGE
oracle.install.db.config.asm.diskGroup=/dev/oracleasm
# Specify the password for ASMSNMP user of the ASM instance.
# Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE
oracle.install.db.config.asm.ASMSNMPPassword=ASMsnmp122345#
# Specify the My Oracle Support Account Username.
# Example   : [email protected]
MYORACLESUPPORT_USERNAME=
# Specify the My Oracle Support Account Username password.
# Example    : MYORACLESUPPORT_PASSWORD=password
MYORACLESUPPORT_PASSWORD=
# Specify whether to enable the user to set the password for
# My Oracle Support credentials. The value can be either true or false.
# If left blank it will be assumed to be false.
# Example    : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
# Specify whether user doesn't want to configure Security Updates.
# The value for this variable should be true if you don't want to configure
# Security Updates, false otherwise.
# The value can be either true or false. If left blank it will be assumed
# to be false.
# Example    : DECLINE_SECURITY_UPDATES=false
DECLINE_SECURITY_UPDATES=flase
# Specify the Proxy server name. Length should be greater than zero.
# Example    : PROXY_HOST=proxy.domain.com
PROXY_HOST=
# Specify the proxy port number. Should be Numeric and atleast 2 chars.
# Example    : PROXY_PORT=25
PROXY_PORT=
# Specify the proxy user name. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
# Example    : PROXY_USER=username
PROXY_USER=
# Specify the proxy password. Leave PROXY_USER and PROXY_PWD
# blank if your proxy server requires no authentication.
# Example    : PROXY_PWD=password
PROXY_PWD=
# Specify the proxy realm.
# Example    : PROXY_REALM=metalink
PROXY_REALM=
# Specify the Oracle Support Hub URL.
# Example    : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/
COLLECTOR_SUPPORTHUB_URL=
# Specify the auto-updates option. It can be one of the following:
#   - MYORACLESUPPORT_DOWNLOAD
#   - OFFLINE_UPDATES
#   - SKIP_UPDATES
oracle.installer.autoupdates.option=SKIP_UPDATES
# In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where
# the updates are to be downloaded.
# In case OFFLINE_UPDATES option is chosen, specify the location where the updates
# are present.
oracle.installer.autoupdates.downloadUpdatesLoc=
# Specify the My Oracle Support Account Username which has the patches download privileges
# to be used for software updates.
# Example   : [email protected]
AUTOUPDATES_MYORACLESUPPORT_USERNAME=
# Specify the My Oracle Support Account Username password which has the patches download privileges
# to be used for software updates.
# Example    : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password
AUTOUPDATES_MYORACLESUPPORT_PASSWORD=

This is the simplest installation you can get, but if you want to do a fast response file based installation, there it is.

I have just transferred my application file from an Imac to an identical Imac, both running OS 10.9.5. When I attempt to open Photoshop 6, I am prompted for the serial number. I enter the serial number provided by Adobe, which I have confirmed with my "pr

I have just transferred my entire application file from an Imac to an identical Imac, both running OS 10.9.5. Everything works fine, excepting that when I attempt to open Photoshop 6, I am prompted for the serial number. I enter the serial number provided by Adobe, which I have confirmed with my "previous purchase" records kept by Adobe. It is demanding a "qualifying product", all of which is contained in the complete files I transferred. Why can't Adobe recognise my valid serial number for Photoshop 6?

I have just transferred my entire application file from an Imac to an identical Imac,
Say what?
Please use the proper installer.
Are you really talking about Photoshop 6 or about Photoshop CS6?

Automatic prompting for file download

I am using a File Download Servlet. Theres a setting in IE under Securiy Settings --> Downloads--->Automatic Prompting for File Downloads.If I have this disabled, I am able to download the file.If its enabled, I am unable to download the file successfully. Anyone have faced this problem before?

Here is the result.I used your code and it worked fine with IE setting Enabled. But when I tried to access the download servlet after opening a new window, it doesnt download the file.

How to create a response file for Acrobat 9 Pro?

I with to collect data from a PDF form made with LiveCycle Designer. The instruction say-
After a user submits a form, open the returned form.
In the Add Completed Form To Responses File dialog box, select one of the following:
I am totally baffled as to where the Add Completed From to Responses File dialog box is. I cannot find such a thing.
It is my understanding that once the dialog box found there are options, including creating a new response file. But, I can't find the box (and neither can my associates).
Any help in this matter would be greatly appreciated.
Many thanks in advance.

In Acrobat 9 Help look under 'Collecting and managing form data' and the other topics under this heading. It is in the "Forms" chapter.
Collecting and managing form data
When you distribute a form, Acrobat automatically creates a PDF Portfolio for collecting the data submitted by users. By default, this file is saved in the same folder as the original form and is named
filename_responses. You can use this file to compile returned forms.
Collect user data
1 After a user submits a form, open the returned form.
2 In the Add Completed Form To Responses File dialog box, select one of the following:
Add To An Existing Responses File
Compiles the data in the response file that was created when you used the Distribute Form wizard to send out the form. (If necessary, click Browse and locate the response file.)
Create A New Responses File
Creates a new response file, using the name and location you specify.
The response file opens after you click OK. Each returned form added to the response file appears as a component file of a PDF Portfolio.
Compile form data
1 In Acrobat, choose Forms > Compile Returned Forms.
2 In the Compile Data dialog box, do one of the following to select a PDF response file:
Click Browse, and then locate and select the response file.
Type the path to the response file.
3 Click Add File, and navigate to the returned form.
4 Repeat the previous step as many times as necessary to add more returned forms.
After you click OK, the data from the selected forms is added to the response file. Each returned form appears as a component file of a PDF Portfolio.
Add user data to an existing response file
1 In Acrobat, open the response file.
2 In the left navigation panel, click Add.
3 In the Add Returned Forms dialog box, click Add File. Then locate and select the returned forms, and click Open.
4 Repeat the previous step to add any returned forms in other folders. When finished, click OK.
When you finish, each added PDF form appears as a component file of the PDF Portfolio.
Export user data from a response file
Use this process to save all the entries in a PDF Portfolio response file to a spreadsheet or XML file.
1 In Acrobat, open the response file and select the data to export
2 In the left navigation panel, click Export.
3 In the Select Folder To Save File dialog box, specify a name, location, and file format (CSV or XML) for the form data, and click Save.

Can't Recorde Response file for Oracle client 11.2.0.3 windows 32bit

Hello
We are going to upgrade our Oracle client on our clients to 11.2.0.3. But I can not record a resopnsfile with setup.exe.
Have Oracle removed this feature?
Here's a dump from setup.exe -help
There is no possibility to run setup.exe witch -record -destinationfile option
Preparing to launch Oracle Universal Installer from C:\Users\Test\AppData\Local\
Temp\OraInstall2013-01-14_02-12-48PM. Please wait ... Usage:
setup [-options] [(<CommandLineVariable=Value>)*]
Where options include:
-clusterware oracle.crs,<crs version>
Version of Cluster ready services installed.
-crsLocation <Path>
Used only for cluster installs, specifies the path to the crs home locat
ion. Specifying this overrides CRS information obtained from central inventory.
-invPtrLoc <full path of oraInst.loc>
Unix only. To point to a different inventory location. The orainst.loc f
ile contains:
inventory_loc=<location of central inventory>
inst_group=<>
-jreLoc <location>
Path where Java Runtime Environment is installed. OUI cannot be run with
out it.
-logLevel <level>
To filter log messages that have a lesser priority level than <level>. V
alid options are: severe, warning, info, config, fine, finer, finest, basic, gen
eral, detailed, trace. The use of basic, general, detailed, trace is deprecated.
-paramFile <location of file>
Specify location of oraparam.ini file to be used by OUI.
-responseFile <Path>
Specifies the response file and path to use.
-attachHome
For attaching homes to the OUI inventory.
-cfs
Indicates that the Oracle home specified is on cluster file system (shar
ed). This is mandatory when '-local' is specified so that Oracle Universal Insta
ller can register the home appropriately into the inventory.
-clone
For making an Oracle Home copy match its current environment.
-debug
For getting the debug information from OUI.
-detachHome
For detaching homes from the OUI inventory without deleting inventory di
rectory inside Oracle home.
-enableRollingUpgrade
Used in cluster environment, to enable upgrade of a product on a subset
of nodes (on which the product was installed).
-executeSysPrereqs
Execute system pre-requisite checks and exit.
-force
Allowing silent mode installation into a non-empty directory.
-help
Displays above usage.
-ignoreSysPrereqs
For ignoring the results of the system pre-requisite checks.
-local
Performs the operation on the local node irrespective of the cluster nod
es specified.
-printdiskusage
Log debug information for disk usage.
-printmemory
Log debug information for memory usage.
-printtime
Log debug information for time usage.
-relink
For performing relink actions on the oracle home
Usage: -relink -maketargetsxml <location of maketargetsxml> [-makedepsx
ml <location of makedepsxml>] [name=value]
-silent
For silent mode operations, the inputs can be a response file or a list
of command line variable value pairs.
-waitforcompletion
Installer will wait for completion instead of spawning the java engine a
nd exiting.
-suppressPreCopyScript
Suppress the execution of precopy script.
-acceptUntrustedCertificates
Accept untrusted certificates from a secure site.
-suppressPostCopyScript
Suppress the execution of postcopy script.
-noconfig
Do not execute config tools.
-noconsole
For suppressing display of messages to console. Console is not allocated
-formCluster
To install the Oracle clusterware in order to form the cluster.
-remotecp <Path>
Unix specific option. Used only for cluster installs, specifies the path
to the remote copy program on the local cluster node.
-remoteshell <Path>
Unix specific option. Used only for cluster installs, specifies the path
to the remote shell program on the local cluster node.
-executePrereqs
To execute only the prerequisite checks.
-ignorePrereq
To ignore running the prerequisite checks.
-ignoreInternalDriverError
To ignore any internal driver errors.
-downloadUpdates
To download updates only.
-showProgress
To show the installation progress on the console. This option is support
ed only in case of silent installation.
Command Line Variables Usage
Command line variables are specified using <name=value>; for example:
[ session: | compName: | compName:version: ]variableName=" valueOfVariable"]
Session/Installer variables are specified using:
[session:]varName=value
Ex 1: session:ORACLE_HOME_NAME="OraHome"
Ex 2: ORACLE_HOME_NAME="OraHome"
The lookup order is session:varName then just varName. The session prefix is
used to avoid ambiguity.
Component variables are specified using:
[compInternalName:[Version:]]varName
Ex 1: oracle.comp1:1.0.1:varName="VarValue"
Ex 2: oracle.comp1:varName="VarValue"
The lookup order is compInternalName:Version:varName, then compInternalName:
varName, then just varName.
Please press Enter to exit...

Hi,
There is no record option with 11gR2.
There is no need to use '-record' flag to record/save the response file. At Summary page of installation, 11gR2 installer provides option to save the response file. We can perfom the silent installation using this saved response file
Unix:
./runInstaller -silent -responseFile <saved_response-file>
Windows:
c:\software\11.2.0.1\database\setup.exe -responseFile <saved_response-file>
For more details, kindly refer
11gR2 Install (Non-RAC): Understanding New Changes With All New 11.2 Installer (Doc ID 884232.1)
4th point in the document explains about this
Thanks,
Krishna

No prompt for response file

Similar Messages

Maybe you are looking for