No prompt for transport request

Hi
After our upgrade of development we have a problem that the system no longer is prompting for a transport request when you do something like create or change.
We can go in to transport connection and make our own but obviously this is a bit of a pain.
Has anyone else experienced this???
The Dev system is open and set to automatic recording of changes in se06
Andy

Standard SAP programs should be default available in all landscapes(DEV,QA,PROD) you dont want to transport.
However;if you find those program lines do not match across landscapes then some OSS notes,SP could have overwritten ,make sure they are applied across all landscapes in these event.
If at all you find discrepancies ,can create a request so that you can transport it.
goto SE80>Programs>select ur program-->object directory enty from main menu change the owner from SAP to personlized..
Aforementioned steps would be last of my steps..
Hope it Helps
Chetan
@CP..

Similar Messages

Prompt for transport request if records are added/modified for custom table

Hello Experts,
A couple of questions,
1. How do we prompt user to create a TR whenever he changes a record in my custom table
via SM30? my custom table has a maintenance type of 'C' - customizing already.
2. How do we transport the custom table contents to another client?
Thank you guys and take care!

Hello
Regarding (1) just have a look at a standard maintenance view like V_T001W (SE11 -> menu Utilities -> Table Maintenance Generator ):
Here you can see that the option Standard Recording Routine is chosen which is responsible for prompting for a transport request as soon as records of the table/view are changed.
Regards
Uwe

Not prompting for Transport request?

Hi Frndz,
Recently our servers had gone into transition phase.
They are moved from 1 service provider to other.
Now the change that I observe is When I create new objects in dev system, its not prompting me to save in
required package/ T request number.
What might be the reason?
Do I need to change any of the settings manually in Transport connections?
Thanks in advance...
Dubbu

Hi,
Please goto Transport Connection screen go to 'Edit menu -- select 'Transport'. Use 'Switch off Standard' and 'Switch on Standard'.
Hope this helps.
- Mayuri

Asking for Transport Request while editing DTP in Quality - Client Open

Hi Guru's,
We have opened the client and trying to edit the DTP, but it is asking for transport request.
Is there any other setting that we need to do in order not to prompt for transport request?
Thanks & Regards.

Hi Ganesh,
One of the options would be to save it in a DUMMY request ,incase you do not want to transport such that you make changes next time it will by default get saved in that DUMMY request i.e it will not ask for a request next time.
We usually save it in Dummy request,when we change a DTP in Quality or in Production.
Rgds
SVU123

Prompt for transportable Workbench request

Hi experts,
I want to create a web service, and let my asp.net program call it.
I input se37 in ECD, and input zzz_yyyy_xxxx as function module, then click "create" button.
In the next step, I need input "Function group", but I have not , so I need crate one.
In the "Create Function Group" dialog, I input "Function group" and "short texst", and click "save" button. It takes me to "Create Object Directory Entry", I input "Package" ,then press "Save"button again.
Now it takes me to "Prompt for transportable Workbench request" dialog. Now I need input "Request" and "short description".
I'm confused. What do I input as "Request"?
Thanks.

I am guessing you are quite new to this? It is asking you to create a transport package which can be sent to quality or production systems later on. If you do not want to do this you can click local object and it stays in development server. Otherwise you click the page icon and then type a description of the work/program you are creating. Save it and it will generate a transport package for you.

Problem in View Maintenance - Prompting for a request

Dear Experts,
We have upgraded from 4.6c system to ECC system. i have a table maintenance generator for a Z table. it has been transported across systems ( DEV, QA). now when i try to edit some data in that view using SM30 and saving it...
its prompting for a request in Quality system, whereas in DEV its not asking..
kindly help on this regard.
thanks
Krish

Thanks for the reply..
In both systems the following are the setting in SE54
Transport is in -> Automatic transport
Adjustment is in -> Automatic Adjustment
any othe clues...
Thanks
Krish

Popup for transport request in WebDynpro ABAP application

Hi there,
which function module can I use to prompt the user for the transport request in an WebDynpro ABAP application.
In SAPGUI I found 'TR_ORDER_CHOICE_CORRECTION' to do this but I get a short dump when I call this one from a WebDynpro ABAP application ...
Many thanks in advance!
Regards,
Steffen

Thanks for your replay!
The reason I get the short dump is the function modules I found call a dynpro screen inside for prompting for the request. I am not surprised this does not work for WebDynpro applications ....
So I thought there is a generic function module for WebDynpro applications available or a WebDynpro component I can use for this ... Sure I could build it by myself but this does not seem to be the right way for me since this requirement seems to be of a generic nature.
@Gaurav: I am interested to bring up a generic popup for prompting for the request. So I cannot use the flags to suppress the screen ...
Best regards,
Steffen

Prompt for Customizing request when saving Sales Employee (VPE1)

Hi,
When we try to create Sales Personnel through SD Menu path (VPE1), on saving the system prompts for customizing request. Since this transaction is a master data and we dont transport this data to our production system. Suggest me a way to avoid this transport request while creating Sales Personnel.
We are currently using version 3.1i and upgrading to ECC6.0. In 3.1i we use transaction PAL1 to create Sales Personnel However it will not prompt for Customizing request
Also checked the SAP Note Note 854390 - FAQ: Use of the sales representative in SD without HR
Help me on how to turn off this customizing request. Basis and Security team could not able to turn this off.
Regards,
Pradeep Maddi

hello, friend.
you have 2 choices:
1. create a transport request, save the data but do not release it for transport.
2. when the dialog asks you for transport request, just close this. the system will give you a message about links. just ignore it.
hope this helped. reward if so.
regards.

Prompt for Customization Request???

Hi Geeks,
When I Started creating the Company Code. I got a popup screen saying that
"Prompt for customizing Request". what does this screen exactly mean. How to overcome it.
I do have one more question: When I started Activating the Control Area I got a message saying that
"Critical Transport:Control Indicator in Controlling Area". Does this says that the control area is activated?
A detail explanation is well appreciated.
Thanks for your time
Harsh
Moderator: Please, avoid asking basic questions

Hi,
1: System asks you for a customizing request where your entries will be stored for later transportation to other SAP-systems. Maybe you have to create one.
You can't overcome it, you can save your changes in a customizing request that is not transported but than the question is: Why are you creating a new comp. code if you don't want to transport it...
2: The message "Critical Transport:Control Indicator in Controlling Area" means that the control indicator is changed (from non-active to active or vice versa) and such a transport can cause problems in the target system (eg you are deactivating by mistake...).
BR Christian

Prompt for customizing request while saving changes on infotype

I have the problem when I am going to change a employees infotype (e.g. infotype 0001 or 0002) using transaction PA30.
If I want to save this action, the screen appear dialog box: "prompt for customizing request."
Has anyone experienced such a problem? If so, can you please tell me how
did you fix it.
Thanks in advance.
Nils

Hi,
For master data maintenance no need of transport request. Ask your basis people to remove transport request option for master data maintenance. Earlier I faced the similar problem I report basis team and they removed it.

Popup for transport request on save

Requirement
Popup for transport request on save and link an object to that TR in abap.
ANY fm
Please help me on this
Vijay

Hello Friend,
SE80, display function group STRD, there are many useful FMs: TRINT_CORR_INSERT,TRINT_INSERT_NEW_COMM,TRINT_POPUP_EDIT_CANCEL_O_SHOW...
Hope it helps.
Best Regards,
Jerry

XI: Alerts - Step by step issue " Prompt for customizing request"

I am going through Michal Krawczyk's blog XI: Alerts - Step by step
Michal Krawczyk and between step 4 and step 5 I run up against an issue. I cannot save it because I get a popup saying "Prompt for customizing request" then I click the list button and it says " You can only include objects of this type in customizing requests only" ( a little redundant I must say ) but anyway - the net result is I can't save and lose all the work I just did.
Any help would be greatly appreciated!
Thanks - Andrew

Scott,
I have replied in your another thread for this issue. I request you to please make one thread only so that it will not confuse you and the SDNers.
---Satish

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

Release strategy for Transport requests

Hi,
Can anybody give me the detail steps to configure release strategy for transporting requests?
we are having Dev and Prd systems.
Regards,
Vinnu.

Hello,
I hope you have configured TMS for two system landscape.
Just make the transport routes also, make DEV system as a Domain Controler.
Then transport requests will automatically come in to the request queue.
Using tx stms_import , import those request sequentially !!
Note: Points always encourage me to reply !!

Command for Transport request

Dear All,
What is the command on OS level for transporting request of SAP.
what are the others command which can be used at OS level for SAP activities apart from BRTOOLS.
If you have any link please mail me.
Please guide.
Thanks

HI,
following command are used to import request.
tp addtobuffer <request>.<sid> If a change request is not in the buffer then this command is used to add it to the buffer, before the import step starts.
tp import <change request> <sid>: To import a single request from the source system to target system.
you need to provide the profile path with -pf = <profile_path> at end of command
The following options are available for the R3trans program:
R3trans -d : This command is used to check the database connection .
R3trans -u <int>: Unconditional mode can be used as we have seen in the above example.
R3trans -v : This is used for verbose mode. It writes additional details to the log file
R3trans -i <file>: This command directly imports data from data file without a control file.
R3trans -l <file>: This provides output of a table of contents to the log file.
R3trans -n : This option provides a brief information about new features of R3trans.
regards,
kaushal

No prompt for transport request

Similar Messages

Maybe you are looking for