No Proxy Playback option in 10.1.1

Hi Guys,
Did a shoot yesterday and thought I'd give MultiCam editing a try in 10.1.1.
I have a Mac Pro 8-Core with 23gigs of RAM... and understandably, when trying to run through the 10 clips I have, playback is very jumpy.
So I tried to switch to Proxy playback, but there seems to be no option for it now.
I know the clips have been optimized because I always select this option when importing, and I can even see the Proxy clips in the finder.
Have I missed something?

If you select the multiclip in the browser and then open the Inspector, do you see green icons showing the Available Media Representations?
Russ

Similar Messages

Editing multicam clips - where is proxy playback option?

Whenever I have been editing Mutlicam clips, I would always choose the "Proxy" option in playback as my media is stored on an external drive. If i didn't, it just wouldn't play smoothy.
After updating I can't seem to find the option to choose proxy and the clips dont play smoothly, playback jerks after a second or two.
This is
Any ideas? If it goes to the trouble of creating proxy media (and the proxy files are indeed still where they should be) - surely there should be a way of using them?
Also - can anyone settle an argument: If a project is edited in 'proxy playback', does that need to be switched off to export in full quality?
I used to think it did, but not sure at all now with 10.1.
(2011 2.7 i5 27" iMac)

Ah! Found it in the top right menu!
Selected 'Proxy' and was greeted with the familiar 'beachball of non response'.
Forced quit as usual and when I relaunched I was back editing in Proxy land!
All is smooth and lovely again!
Now, I wonder if i need to switch it back to get full quality export?
Any ideas?

Action Playback option changes the Result of an Automated Script.

When using the Playback Option in the Actions menu, then the Results are different with different Acceleration methods.
So the Result is different with, Accelerated - Step by Step - Pauze for [1],
I Expierence the issue with Windows and Mac as well.
This happens with Illustrator CS5 (15.0.1)
# Workflow
     Creating the action:
     Open Illustrator, open the attached document: 4102107 Exact.pdf
     Create an New Action, enable Transform window
     Select the Black Square and the Red text Exact
     Go to Object, Scale > 33.3% and press Copy.
     Then go to Transform an from the upper corner and enter on the
     x=397,13 pt y=212,25 pt
     You see the Image moved to the correct clip.
     Open the Document in Illustrator,
     Go to Actions > Select the created action >Now go to the Panel Menu from Actions > Select Playback option.
     You get a new Dialog where you can select a different acceleration mode: "Step by Step" - "Accelrated" - "Pause for [Numeric] Seconds"
     So the issue is, when you select here a different accelration the result is different.
>Is this as Designed? If So, why because when i understand the function of an automated script. It should exactly get the same
result as programmed, why else would you want to use the script if the result with be different without nothing.
There is running an Escalation case about this, But hopefully anybody more experienced can comment me about this. Or inform wheter it's a bug?
Please help me in this. (thank you in advance!)

To make a few things clear I have created a Video of the issue.
Have a look on:
http://adobesupport.emea.acrobat.com/p65456795/
Maybe i really blow in explaining what exactly happens, but i'll try it again.
When creating an action (as shown in the Video) You can see that the result
is totally different and when creating the action. This is error 1.
- I recieved a respons that we just shouldn't use the Transform Panel. So i requested to know why there is a panel created, if we cannot use it.
No respons.
Then when you select a Playback option in the setting of the Actions Panel,
the Result differs. As you can see when executig in the Accelerated the Movement gets placed WAY out of the file.
When selection Step by Step or Pause for [Numeric] Seconds, then the result is that the movement gets placed
at the bottom of the file. Both of the Results don't even come close in the Action which is created.
Hopefully this will calrify what i ment.

Video Playback Option in "Preferences/Audio-Video Out"

The following did not make it into the User Guide, though it did get into the troubleshooting docs:
http://www.adobe.com/support/techdocs/332121.html
332121 Video Playback option in Audio/Video Out preferences (Encore DVD)
A new option was added to the Preferences menu of version 2.0 of Adobe Encore DVD. When you select Edit > Preferences > Audio/Video Out, you see an Automatic option in the Video Playback section. This option is selected by default, allowing Encore DVD 2.0 to play video in a Standard Direct3D mode. If the feature is not selected, then video playback will be in GDI mode.
The only reason to deselect this option is in the case of poor preview playback or black video. In order for the change in preference to take effect, you must close the Monitor panel and then reopen it.
Background information
Encore DVD 2.0 (unlike previous versions of Encore DVD) uses the Premiere Pro playback engine for video playback. Premiere Pro has three Desktop Display modes: Compatible, Standard, and Accelerated GPU Effects. In Compatible mode, video is played using the GDI. In Standard mode, video is played using Direct 3D. In Accelerated mode, video is played using Direct 3D with GPU.
The default setting for Encore DVD 2.0 is comparable to Premiere Pro's Standard mode (Direct 3D). When the Automatic option is deselected, it is comparable to Premiere Pro's Compatible mode (GDI).
If Adobe Premiere Pro 2.0 detects a Direct 3D error when previewing in Standard mode, it switches to Compatible mode. Encore DVD 2.0 does not have this capability, nor does it provide the same option in the User Interface for the user to switch between the three display modes. This is why the Automatic option was included in the Audio/Video Out preferences.

Welcome to iMovie Discussions.
Sounds like you've been shooting at p ("progressive") frame rate (..24p or similar).
iMovie can't handle that (..except for JVC's 720p footage..) and it thinks that each frame is a "field" (..half a frame). It therefore plays those frames at double speed, thinking that there should be two 'fields' to a single frame.
Did you shoot at a "p" frame-rate..? If so, you'll need to convert the material, with some other program, so that iMovie can handle it.
I can't remember offhand what software might do this, but if you were shooting in HDV hi-def (which is recorded in the camera using the MPEG-2 video system) you may be able to use MPEG Streamclip (click on that blue link) to "unscramble" your material.

No Multiclip Playback option in RT Playback

Sorry to ask yet another multiclip question, but this is quick. I made a multiclip sequence, then dropped the clip into the sequence. When paused, the viewer shows all 4 videos and the canvas shows the one angle selected. But when I play the viewer, it no longer shows the four angles and instead only shows teh highlighted one full screen. I have open sync selected, BUT here's the catch, under the RT dropdown menu, I only have "Play Base Layer Only," "Use Playback Setting," and "Full Quality." I don't have a Multiclip Playback option. Now this isn't a standard multiclip sequence as I used Studio X's suggestion to make a sequence to match the clip settings. Do I need to have a standard, NTSC, HDV, DVCPRO, ect. sequence in order to view a multiclip live? I tried doing a multiclip with 4 DVCPRO HD files, but I didn't do the research ahead of time and my firewire 800 drive cannot supply nearly enough bandwidth to view all four at once.
I hope this is clear enough and thanks,
-Brian

To Studio X- well there was one render file for the project, so I deleted that, but no luck. I also tried making another multicam sequence, and again while the sequence comes out the format of the clips, it still doesn't give a Multiclip Playback option, and I haven't, nor does it want me, to do a render on that sequence.
To loyed256- I'm working off of a G-drive mini via Firewire 800 and that stutters several seconds into the DVCPRO multiclip. What I've done now is gone back to the original 640x360 files, pulled them into FCP, gotten the "these are not optimized for final cut" window, clicked OK, then made those .movs. into a 640x360 multiclip sequence. I just though about this, is it cause they're not optimized for final cut? Now I'm guessing that's the problem, so I'm gonna try to reimport them as diff formats final cut may like.
Thanks so far,
-Brian

Does the iphone support the "crossfade" playback option?

I'm trying without success to find an option on my iphone that would let me turn on the "crossfade" playback option for my music. I love this feature on my ipod nano and the new Itunes, but I can't seem to find that feature on my iphone's ipod. Is it just not possible to do this on the iphone?
Message was edited by: Chiropractor

just realized that i posted this in the wrong discussion area

Video Playback Audio Playback options?

I am trying to print to tape for the first time. With no success. My sony gv-d300 record lights go on and heads move, but records nothing. Then tried to use my camcorder to record onto. Same thing. Nothing records onto the tape. I've read that I need to Select firewire on video/audio playback under View. But my options for the video playback are none and digital cinema Preview. Audio playback options are Default and Built in Audio. The Firewire option is in light gray, so I can't choose it. I've looked at my preferences and my firewire is selected under Devices. Can someone help?

FCP is not seeing the recording device(s).
Make sure the target device is turned on before you turn on your computer and launch FCP.
x

Premiere Pro CC - Jerky Playback when using the Playback Option (Mavericks)

I certainly jumped the gun and wished I hadn't, but Mavericks as sort of sunk part of my traditional editng approach. I know, should of waited to upgrade... alas.
In PPro CC, whenever I have the playback optioned turned on for another monitor, I get stuttery/jerky playback in the program monitor and the playback monitor. When I turn off the feature, I get smooth playback, but have sacrificed the playback monitor, which is quite essential. Has anyone run across this issue or recognize what could be throwing things off?
This was true in 7.0.1 and the latest update 7.1.0. -- I'm not sure its an Adobe issue, this may be fully on Apple... with high chances of that.
To try and fix I made sure power nap was turned off on my Adobe Apps and that my Mission control spaces weren't separate for each monitor...
Thoughts?
Running Macbook Retina on Mavericks, Premiere Pro CC, 16 GB Ram...

Go back to http://forums.adobe.com/community/premiere and enter
mavericks
in the line under ASK A QUESTION to read previous mavericks discussions (there are several) with at least one having a possible solution
click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

Why can't I see the Multicam Playback option in the TIMELINE RT pop-up menu

Im trying to be able to do realtime editing in Multicam.
Ive Created my Multiclip
I've selected OPEN in the Sync menu.
They'll plaback in the Viewer/Canvas in sync, but not with timeline
In my TIMELINE, theres NO pop-up option for
Multicam Playback in the RT tab, and I've gone to SYSTEM SETTINGS and
enabled the MULTICAM PLABACK option, still no option in RT. I think this
is somehow the problem.
Any thoughts or Help appreciated
FCP V5.0
G2 2.3
G5 2.3 Mac OS X (10.4.7)

I had to go through the manual's setup for multiclip three time (3TIMES!) before i could make everything work, it's quite frustrating the first few times, I agree.
You may need to restart the application to have all of the new settings take effect?
While not necessary, you also might want to select the multiclip keyboard layout option. it places a bunch of cool -- if indecipherably stupid iconic -- buttons in your button bars.
bogiesan

How do I get iTunes to save Gapless Playback option?

I have an album I want to set for gapless playback.
These are the steps I take:
go to album view
select all tracks in album
go to GET INFO
go to OPTIONS TAB
select GAPLESS ALBUM: YES checkbox
Save
And...it doesn't work.
If I repeat the above, when I get to the OPTIONS TAB, the GAPLESS ALBUM checkbox is UNchecked. It appears that iTunes will not save this option.
Any ideas why? Any fixes?

brolivier wrote:
I did that but it didn't help.
I grepped the mp3's and I found that the titles that are showing up are in the mp3 files. Is there a way for me to tell iTunes to use the filename rather than the embedded data?
No.
You can delete the ID3 tags, delete from iTunes then re-add them and iTnes will use the filename as the trackname.
Or rename them in Tunes and this will change the filename.

How to unset the 'use itunes for internet music playback' option

In Advanced Preferences, I mistakenly clicked the SET button for "Use itunes for internet music playback". Since then, I have closed and opened itunes, so it appears the preference has been saved (the field is no longer highlighted)
I cannot find any way to unset this option. I want to unset this option. Could someone please tell me how?

I don't think that deleting the plist file will help.
Clicking that button sets the handler for a bunch of file types. You can't just unset it, you need to set the handler to something other than iTunes. Normally audio and video are handled by the Quicktime Plugin. You can restore that behavior in System Preferences:
System Preferences -> QuickTime (in the Internet and Network set) -> Advanced -> Mime Settings...
You may have other plugins or programs you want to use for some formats (like .wmv or .avi). Those programs should be able to reclaim the file and MIME types from their preferences.

MXO2 Mini playback options

I'm playing around with the new mini and all is good outputting HD on a 42"sony lcd tv.
Question though, when outputting [email protected] in the view options I've got the choice of - NTSC 16:9 YUV 8-bit (720x486) or 486p 23.98 16:9 YUV 8-bit (720x486).
They both look very similar, the NTSC is a little crisper I think.
Just wondering if one is the right way or it's immaterial?
Thanks

Hey P.,
For dealing with the MXO2 Mini for best results you'll usually want to choose the format that best matches your Sequence Settings ... if you are working in a DV 480p 23.98 sequence then the Matrox MXO2 Mini - 486p 23.98 YUV 8-bit (720x486) video playback preset is the correct one to use. If you choose the NTSC preset then you are actually telling FCP to add pulldown to the output and pass it to the MXO2 as a standard 29.97 interlaced NTSC output, which may not be what you intended). As to how it all looks when viewed on your HDTV, that may be affected by your Video Output setting in the MXO2 Mini preference pane ... what settings are you using?
Cheers
Andy

Exchange 2013 using ARR reverse proxy OWA options won't open

Hi,
I've been using the exchange team's blog post (http://blogs.technet.com/b/exchange/archive/2013/08/05/part-3-reverse-proxy-for-exchange-server-2013-using-iis-arr.aspx)
as a guidelin on configuring my ARR deployment in my lab.
Everything was working perfectly right until i got the last part of the blog on restricting the pattern matches.
The rewrite rules all work fine and everything is working as expected with the excpetion of the fact that i cannot access the options in OWA. ECP itself works great if i access it via the
https://ecp.domain.com/ecp url, but as soon as i use the https//mail.domain.com/ecp it just wont display anything.
Looking at the failed request logs it just shows that it executes a 302 rewrite to ecp.domain.com, which is what i would expect it to base done rewrite rule matching
https://mail.domain.com/ecp to the ecp.domain.com server farm.
If i look at the iis logs it looks like it's getting into some sort of loop (the section below is about a 10% of a single attempt to access the options pages:
2014-06-28 12:25:38 xxx.xxx.xx.xxx GET /ecp/ rfr=owa&X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=6983c585-b0ea-4fd0-9bb1-fc747ee8e992 443 - xxx.xxx.xx.xxx Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.2;+WOW64;+Trident/6.0;+.NET4.0E;+.NET4.0C)
- 302 0 0 15
2014-06-28 12:25:38 xxx.xxx.xx.xxx GET /ecp rfr=owa/&X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=d32a3a4f-d8a6-4712-91d4-56360be33793 443 - xxx.xxx.xx.xxx Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.2;+WOW64;+Trident/6.0;+.NET4.0E;+.NET4.0C)
- 302 0 0 0
2014-06-28 12:25:38 xxx.xxx.xx.xxx GET /ecp rfr=owa//&X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=14797897-f1ad-454a-b73c-fde041a43d2b 443 - xxx.xxx.xx.xxx Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.2;+WOW64;+Trident/6.0;+.NET4.0E;+.NET4.0C)
- 302 0 0 0
Did anyone ever run into something like this? Or have an idea where i may have made a mistake? I've tried everything i could think of.
The rewrite rules i have in place are basically exactly the same as the exchange team's blog but just in case i overlooked somehthing, please se the image below.
thanks in advance for your time

Hello,
I wanted to see if anyone has any suggestions on reverse proxy options that can do pre-authentication like TMG use to do? I am currently trying to deploy out a new Excahnge 2013 setup in coexistence with an existing Exchange 2010 environment
which will then be migrated over. And one of the requirements is to block certain users from accessing webmail externally while still allowing others to access webmail. That is currently achieved by using a TMG server but that is going to be decommissioned
along with Exchange 2010.
I have been searching online but so far I have not found anything that seemed to meet this requirement. I have seen that IIS Web Application Proxy tied in with AD FS would do the job. But there is some issue there with Excahnge 2010 still being active that
won't allow it to work. Some suggestions I have seen online involved changing permissions on the IIS directory or modifying web config files but those options didn't seem like they provided a consistent result.
So I am looking for some sort of option that is either inexpensive or some means of leveraging existing Microsoft technologies to achieve my goal any suggestions would be helpful.
Nicholas,
How about IIS ARR?
http://blogs.technet.com/b/exchange/archive/2013/07/19/reverse-proxy-for-exchange-server-2013-using-iis-arr-part-1.aspx
http://blogs.technet.com/b/exchange/archive/2013/08/02/part-2-reverse-proxy-for-exchange-server-2013-using-iis-arr.aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Podcast & Audiobook Playback Options on iPod Classic?

I recently got a new iPod Classic (7th Gen) as an anniversary gift, but I've been having trouble with how it handles Podcasts & Audiobooks - the iPod I used to have was a couple of generations older (I think 5th Gen?). Basically the two biggest issues I have are:
1. Podcasts - the older iPod used to play just a single episode, and then exit back to the main menu once the episode was over (unless I queued several episodes together in a playlist). The new iPods treat podcasts like an album, and continue playing the next track. This wouldn't be an issue, except that podcasts are sorted in newest -> oldest order, such that it will play Episode 13, then move on to the next track which is Episode 12, and I have to stop it, go back to the menu, and select Episode 14. Is there any way to get the order to sort ascending (changing it in iTunes didn't appear to affect the order on the iPod at all)? Or at least an option to play only one episode at a time and not automatically cycle through them?
2. Audiobooks - I classified my audiobooks into various genres such as "Classics", "Fantasy", "SciFi", etc. in iTunes, and on the old iPod, these genres would show up under Music->Genres in the iPod menu (alongside Rock, Pop, etc.). This appears to no longer be the case. Similarly, audiobook authors no longer appear in the list of Artists and audiobook titles no longer show under Albums. It appears the only way to access audiobooks now is through the
Music->Audiobooks menu? And unfortunately it appears as though the Audiobooks menu only lists individual track names, and not Artist or Album? To make matters worse, the track names are being sorted alphabetically and ignoring the Disc # & Track # metadata stored in iTunes. Is there any way to fix any of this?
Any help would be appreciated! I've poked around in the settings both on the iPod itself and in iTunes with the iPod connected, but I haven't found a way to correct any of these issues yet.

I've found a workaround for this problem: the Join Together v5.1 iTunes script from Doug's AppleScripts combine the segments into two large AAC files.
Now it's OK if the iPod stops playing segments after they finish because they're hours long instead of minutes.

In iTunes 11 how does one create a gapless CD transition if the CD is already in the library. The gapless playback option is not where it was located in the last version.

I have a large itunes library that I use with Pure music. In the past, I was tagging CDs imported as gapless after the fact. Primarily it tool me a while to learn that I needed to do this for best playback from memory. in iTunes 11, I can see how to join CDs on input but not how to join songs of a CD that is already loaded. Any Ideas?

MartinR wrote:
Changing the drive alone, even if you give the drive the sam name as the previous drive, won't solve it. The mere fact that you moved the folders/files to a new drive makes it a different location. You have to reconnect the media after moving the location.
Not Quite. As an experiment, I created a series of folders on a clean target drive with the same names as on the source drive, then drag-copied the media files for a given project into those folders. I did this with 2 FCE projects and both opened on the new hard drive without the need to re-connect the media. In this case, all of the media was located in a folder at the root level of the drive. Apparently, the FCE application begins its search at the root level and seems to work even though the names of the 2 drives are different.
I may not be as fortunate transferring projects from other hard drives because the directory paths for media will not be the same. Anyway, it worked for this particular case and will save me some time and effort.

No Proxy Playback option in 10.1.1

Similar Messages

Maybe you are looking for