No PS9.0_SDE & SIL Mapping to load Historical PS E-Perfor data into OBIEE

Hi Folks,
we have the latest BI environment OBIEE 10.1.3.4.1 and using PeopleSoft 9.0 as the source.
The Peoplesoft 9.0 has new set of E-Performance tables when compared to older Peoplesoft tables.
so when the systems were upgraded from Peoplesoft 8.2 to 9.0, the historic E-Performance data is not there in the new PS 9.0 E-Performance table.
when this PS9.0 is processed into OBIEE, the OBA Warehouse contains only New e-perf data and NO Historic data.
i went through all the mappings and did not find any mapping related to load the Historic data. the SDE_PSFT_90_ADOPTER contains mappings only related to new Peoplesoft tables. is there any mapping related to this? or a new customized mapping has to be created.?
New Peoplesoft9.0 table: PS_EP_APPR and PS_REVW_RATING_TBL
OLD PeopleSoft table: PS_Employee_review
and in OBAW, the table that is populated using the new table is w_wrkfc_Evt_f (NRMLSD_PERF_RATING column) and Performance Band Code
your suggestions are appreciated
thank you

Had a similar issue at my current client. If you check the PSoft upgrade docs, Oracle actually had no upgrade path for the PS_EMPLOYEE_REVIEW table as the effective date logic for this table is ambiguous. Here is an excerpt:
The existing Employee Review family (PS_EMPLOYEE_REVIEW) stores both the Commercial and Federal reviews/appraisals. After analyzing the key structure and functionality of the Employee Review structures, it was realized that there is no way to upgrade this data into the new ePerformance (PS_EP_APPR) key structure with any certainty of functional accuracy. This is because the keys to PS_EMPLOYEE_REVIEW are:The fact that PS_EMPLOYEE_REVIEW is effective-dated, and its FROM/THRU dates attributes are both optional, make it almost impossible to translate into PS_EP_APPR's required Period dates. Even the fundamental question of “What does a new effective-date mean?” is ambiguous
I also checked the OBIA 7.9.6 mappings, the PS_EMPLOYEE_REVIEW table is not brought in. Only the PS_EP_APPR table is used as a source for the SDEs. I even checked the PSoft 8.8 mappings, and cound not find it there either. We had to customnize the existing ETLs to extract from the PS_EMPLOYEE_REVIEW table.
Ahsan

Similar Messages

Loading MS Access Table and Data into Oracle

Hi,
I have few tables in MS Access. I want to create same layout of tables in Oracle and want to populate data from MS Access tables to Oracle tables.
Please let me know if there is a way by which I can create tables and load data automatically (thru some option or script)?
I have Oracle 10g database and its clients.
Thanks in advance,
Rajeev.

You can use Oracle migration workbench
Loading MS Access Table and Data into Oracle
It´s very easy to use and good to import
regards,
Felipe

Problem in loading of flat file transaction data into BI7

Hi Experts,
I am new to BI7, got in problem in creation of Data source.
I have fields in flat file are:
CUSTID,SREPID,MATID,PRICE PER UNIT,UNIT,QUANTITY,TRANS.DATE
one of the row under the above fields is
C100,SR100,MAT01, 50,CS,5,19991005
Created infoobjects are:
IO_CUSID
IO_SRID
IO_MATID
IO_PRC
IO_QTY
IO_REV
0CALDAY
IO_QTY was created with Unit/currency '0UNIT'
In creation of Data source, under field tab system shown extra CS field, I did confuse that which infoobject should be map to this field. At the same time i created IO_QTY with 0UNIT so when i entered IO_QTY under infoobjects column, system automatically created 0UNIT infoobject. I didn't completly understand why one of the unit (CS) sat under the fields column. could you clarify me please.
And also could you please tell me the procedure of creating transfer routine for sales revenue as we didn't have this object in flat file (SS). In earlier version of BW(Addison Wesley Step by Step book) i did this at infosource level. Here i am loading the data without infosource so just i would like to know is it possible to create transfer routine at DS level or do i need to create Infosource in this case. If it is the case also could you please make me understand with procedure to create transfer routine for sales revenue.
Your solutions will be more appreciated with points.
Thank you,
Shri

Hi,
1.Open Administrator Workbench: Modeling, from the menu or using the transaction RSA1
2.Go to Source Systems (File)and Create a new System.
3. Double click on the datasources, create data source
4.Entitle the Datasource, choose Transaction Data as Data Type Datasource
5. In next screen, Go to Extraction , Activate the data source
6.Go to Preview. Press Read Preview Data.
7.Data will be loaded: Save and activate the datasource
8.Go to InfoProvider, go to Info area and create Infocube
9.Entitle the infocube, press create
10.Display all info objects: . Choose your info objects , Move the characteristics and key figure to the infocube by drag and drop adn activate
11.Go to InfoCube, create transformation
12.Click on the Show Navigator button. Match the fields in navigator. Save and activate.
13.go to info provider, your info cube, create data transfer process
14.Choose: Extraction Mode: full
Update: Valid records update, Reporting possible (Request green)
Activate, execute
14.Double click on the data source, Read Preview Data
15.Create an InfoPackage by right clicking on the datasource. Execute the load into PSA.
16.Verify data was loaded into PSA before proceeding with the next step.
17. Execute the Data Transfer Process
18.Monitor the results (Menu: GoTo: DTP Monitor)
19.Try to display the data at the BW Frontend.
Thanks,
Sankar M

Loading data into a CLOB column

I need to find out how to load about ten sentences of data into a clob column for a table in the database. I have a pl/sql procedure that loads data from an xml file into various tables in the the database. Recently, we added a column (test_dummy) to one of the tables and defined it as a CLOB. There is a corresponding node (detail_info) in the XML file that maps to this column. I need to figure out how to incorporate this in the pl/sql procedure so that the data in the XML file for the node (detail_info) is loaded into "test_dummy". Any ideas?

Take it one at a time. Use 'extract' function to extract an XML snippet from a given XML. The question couldn't be more vague. Maybe an example would help?
Rahul

Loading data into 0PUR_C04

Hai
I want to load the some set of data into 0PUR_C04 from
2LIS_02_HDR
2LIS_02_ITM
2LIS_02_SCL
So for which fields i should take to load the small set of data and which i need to load first(HDR, ITM, SCL).
I mean from which datasource needs to load first. please let me know.
i ill assing the points
kumar

Hi,
You can use them in any order. If you donot want upload all the data , then give some selection in their infopackages.
With rgds,
Anil Kumar Sharma .P

Initial Load of Service Order by loading histor. prices (w/o Pricing P.)

Hi Experts,
in our actual proyect we need to load historical service orders into the system via report. No our problem is if we shut of the pricing procedure the prices are set in the report are not taking into account. The result is that the products in the tickets are with 0,00 Euros. If we do not shut of the pricing procedure the prices are loaded which are assigned to the products.
But we need to load the tickets with the prices that are included in the report. How can we do that? Someone has an ABAP Example.
Best Regards
Oliver

Solution not necessary anymore.

How to tell what maps are loaded?

Please forgive me if this has been asked already:
I have an N95 8GB, over the past few days, I've been playing around with the Map Loader program, loading different things up and deleting them. But, I can't remember where I left it, and which maps I have and haven't loaded yet. Is there any way of telling what maps have been loaded onto the device already? Maybe using the Map Loader or via the phone itself?
Also, after I've loaded a few maps to the phone via map loader, is there any way to delete just some of the maps already loaded, but not all? When I was using the Map Loader, it didn't seem to give an option to delete some. It appears to be just a Delete All.
Thanks!
Kev

That is the annoying thing about Map Loader. You have to delete all maps to delete just one.
Anyway, it isn't all as bad as it sounds because Nokia Maps update their maps twice a year so you should reload your maps every 6 months to make sure you have the latest map anyway. So every 6 months I delete all maps and reload the ones I want.

Google Maps not loading on my iMac

I can't get Google Maps to load on my iMac. Whenever I go to a web page that uses Google maps (i.e. http://connect.garmin.com/activity/29817682), the outline of the map loads and the scale, route etc. but the actual background map or satellite image doesn't load, it just sites there with a grey background and the status shows 'connecting to mt1.google.com'
The number on the 'mt1.google.com' may be different as sometimes it is mt0.google.com, but it would seems as though my iMac can't connect to the Google servers.
This happens in both Safari and Firefox and also any third party apps that use Google Maps.
I thought it must have been an issue with my ISP or router, but I have a couple of PC's that connect to the internet through the same router on the same internet connection. These can all connect to Google Maps OK so it doesn't appear to be an issue with the ISP or the router, it is just my iMac that has this problem.
Any ideas how to fix it? It does very occasionally manage to download the maps after about 10 minutes of trying but more often than not it doesn't.
Thanks,
Alan.

Thanks William... That has certainly helped with diagnosis. Unfortunately I don't seem to be able to adjust any of those settings within my belkin router.
Switching the firewall off in the router does allows Google Maps (and Google images that I was also having issues with) to load in both browsers and other applications. I'm a little reluctant to do this however as it doesn't really seem like a sensible 'fix'?
Alan.

How to Load Historical values from Material Prices

Hi
I have to load historical values from Material Prices.
I'm using extractors 0CO_PC_ACT_02 and 0CO_PC_ACT_05.
Do you know how I can do this in a easy way?
Help is appreciated.
thanks in advance.
best regards

Hi Joao,
This extractor0CO_PC_ACT_05 takes the data from table MBEW. ( data for the current period, previous period and last period of the previous year )
If material ledger is active, then it takes the information from table ckmlhd for those materials.
It does not look like fetching from MBEWH.
Please validate my above comments with sample extraction for a material and plant.
If that is the case, I would suggest you have to create a custom extractor based on MBEWH to get the historic price data and with 0CO_PC_ACT_05 you can get the prices for the previous period as they get completed .
0CO_PC_ACT_02 gets you the inventory value and not the price in the same way.
You might have to think about 0CO_PC_ACT_06 and 0CO_PC_ACT_07, if you have project stock and sales order stock in your business scenario.
Please let me know, how this goes.
Thanks,
Krishnan.

Loading historical data with 0CO_PC_ACT_02

Hello,
    I need to load historical values with infosource 0CO_PC_ACT_02. I can load the current period, but get no data from R/3 for historical periods. When I run RSA3 on R/3 for a historical period, I get no data, so I don't believe that this is a BW Issue.
    My question:
   1. Is there a job or something on R/3 I need to run to enable this data source to pull historical data? If so, what is it and how do I run it?
   2. Is this data source simply not able to pull historical data?
Thanks.
Dave

Hi All,
I have same issue , any one got work around to load history data with this Extractor(0CO_PC_ACT_02) ?

Loading Historical data to the new field without deleting the data in cube

Dear BI Experts,
I have enhanced a new field to the Generic data source in BI 7.0 .
I need to load historical data to the newly appended field.
As we are having very huge data it is not possible to delete and do init again.
Is there any other possibility to load the historical data for the new appeneded field without deleting the old requests?
Thanks for your Kind help.
Kind Regards,
Sunil

Dear Sushant,
Thanks for your reply.
But I am just wondeing if there is any possibility of loading historical data for new field using Remodelling concept
with out deleting old requests.
I do not know about Remodelling conept but heard that it is not recommeneded to use.
Can you please suggest and help.
Thanks and Regards,
Sunil Kotne

Reg: Loading historic data for the enhanced field

Hello All,
We need to add a new field 0VENDOR to our datasource 0FI_GL_4. This field is available in our BSEG table. Hence, we are planning to go ahead with datasource enhancement.
Now, please advice on how to update the historical data to this newly added field.I have heard there is a BW functionality/program to do so without deleting the entire data. Kindly advice on the possible solutions.
Thanks & Regards
Sneha Santhanakrishnan

HI Sneha,
Using remodeling option you will be able to do that, ie.. loading historical data for new attributes without deleting existing data. But the problem is in remodeling either you can assign constant or some other attribute value or values determined using EXIT.
Now when you are loading data from source system and if you need historical data as well the best practise is delete existing data and reload it from source sytsem.
But if you don't want to do that then I can give you one trick but not sure whether it will work or not. The idea is to populate the historical values for 0Vendor using customer exit option of remodeling. Now to get the historical values in customer exit you will need all that data in some BW table, here you can think of creating some generic extractor which will store the values of all the documents and the respective vendor, as you will load data form source system you will get historical values as well.
Now read that table in customer exit and populate vendor value. This will be one time process to populate the historical values.
Regards,
Durgesh.

Load Historic Sales Data into SEM

Hi experts,
I have a requirement in my project where as part of system readiness check it has been asked to "Load Historic Sales Data into SEM".Does anyone know as to how to proceed with the requirement.
Has anyone dealt with this kind of requirement ever ?
If yes can you tell me the steps please.
Watever information you guys have please share it with me.
Usefull answers will be rewarded subsequently.
Thanks in advance,
Abhinav Mahul.

Hi Abhinav,
Hav you integrated your system with BW system.
If yess then you need to upload all previous sales information from CRM system to BW system.
Secondly, copy all the CRM sales order data residing in an infocube to be replicated to a sales planning sales order infocube of SEM.
This is what is meant by Loading historic sales data into SEM.
To do this you would require a SEM/BW consultant.
You can use a funtion name 'COPY' in BPS-SEM to copy one sales infocube to other.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Init Load,Historical Data Load & Delta Load with 'No Marker Update'

What is the difference b/w Compression in Inventroy cube while Init Load,Historical Data Load & Delta Load with 'No Marker Update'???
please help for this quesy..
Thanks
Gaurav

Hi Gaurav,
I believe you will find the answers here...
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366&overridelayout=true]
regards
Pavel

Blackberry map not loading!

Hi all!
BB maps not loading on my Z10. I wish to download official google map not developed by third party. It may be developed by either RIM or google for BB. Suggest me good one please
By
R Jagadeesan

Bemaps 10 Pro
Twitter: @ukmight
1. Click on the " Like " button if you find anything helpful posted.
2. If any of the replies in your post has resolved your problem, mark the reply(ies) as " Solution ", so that others can readily view the solution instead of creating another redundant post.

No PS9.0_SDE & SIL Mapping to load Historical PS E-Perfor data into OBIEE

Similar Messages

Maybe you are looking for