NO PSA for InfoSource and source system 120 : Maintaing Transfer Rules

Hello BI Experts ,
I am working on Generic data source extraction.
Earlier I mapped all fields infoobjects in Transfer Rules and then loaded data to ODS properly.
But later on I made few changes in Generic data source view and exits in the R3 and replicated the data source to BI.
Then Remapped the fields to infoobjects in Transfer Rules.
Now I can see Transfer Rules Green and all fields are mapped properly.
But when I activated Transfer Rules I am getting message that ,
"There is no PSA for InfoSource ZPS_DATA_BB and source system 120 "
Data source is active in R3.
Communication Structure and Infosource are Active in BI.
Regards ,
Amol K.

hello Surendra ,
I did the same thing already.
I was looking for some otherway.
Thanks for reply.
Regards ,
Amol K.

Similar Messages

InfoSource and Source System Not getting collected while activation BC

Hello there!
I'm trying to activate the business content. If i group all the objects below and install a cube (or update rules), it gets everything but infosources (Transfer Rules, etc.) and the source system assignment. Neverthless, if i assign datasource to infosource, it works properly.
I've installed the data sources, replicated it in BW, and done the source system assignment correctly. Any ideas what is going wrong?
Thanks and Best Regards,
DKA.

The issue was with Repository Cache. Delete it and everything works fine.
Admin Workbench -> Business Content -> Extras -> Repository Cache (DB) -> Delete (Delivery Objects)
Thanks, anyways.
DKA

CLIENT of the source system in the Transfer Rules

Hi,
Can I get the CLIENT of the source system dynamically in the Transfer Rules (and assign it to an InfoObject)?
I have a generic extractor from a R/3 source system. The table in the source system & the extract structure the DataSource both contain MANDT, but its not coming in the RSO2 screen (which, if I'm not wrong, is how it should be).
I need the CLIENT info. in my BW data targets. I do not want to hardcode this value in Trans Rules as the client in Dev & Prod is different for my R/3 sys.
If I can't get it directly from the DataSource, is there any way I can get it from any system field using routine?
If I'm not wrong - SYST-MANDT in the Formulas will give me only my BW CLIENT.
Thanks in advance for your help.
Regards,
Melwyn

hi,
i think if your bw dev and prod client is different you can try in transfer rules
if sy-mandt = xxx. ( bw dev client number)
result = 'yyy'. (source system dev)
else.
result = 'zzz'. (source system prod)
endif.
or enhance the extract structure/ append structure with zz field for mandt and field in user exit zxrsau01 with sy-mandt
or if use infoobject 0LOGSYS, populate in transfer rules with result = g_s_minfo-logsys.
hope this helps.

There is no PSA for InfoSource 8ZCCA_O09 and source system BWPCLNT800 RSAOD

Hi All:
We make a Heterogeneous system copy of BW 3.5. from Solaris 9-Oracle 9i to AIX 3.5-Oracle 9i.
We must have to rename the Logical System Name and during the Functional Testing the users configured the conections again in RSA1 transaction, then they start the
testing phase but get the next error in the Monitor-Administrator Workbench:
"@5C@ 28.02.2008 19:59:31 There is no PSA for InfoSource
8ZCCA_O09 and source system BWPCLNT800 RSAODS 203"
We can see that the errors refers to the old (BWPCLNT800) Logical
System Name; during the configuration of the RSA1 they renamed the
Logical System Name of the BW System to BWNIUSA800.
We found the SAP Note 518426 but we are not sure about if we can
execute it without affecting the system or the configuration.
Some one Can help us ?.
Best Regards
Reynaldo Rebolledo.

Hi Reynaldo,
this forum here is related to SAP NetWeaver Master Data Management. Your question seems to be related to SAP BI. Please raise your question in the [BI Forum|/community [original link is broken];, because I do not think that you'll find the experts to answer your question here.
BR Michael

No PSA for Infosource X and source system Y. Here Y is the flat file source

Hi,
We are facing an issue while transporting from dev s/m to quality. There is no PSA for Infosource X and source system Y. Here Y is the flat file source system this issue we are getting while transporting transfer rules.We are checked in OSS notes 518426. Its not helpful.
Thanks
Manjula

Hi
Try RS_TRANSTRU_ACTIVATE_ALL (SE38).
You may also check SAP Note 861890 - ODS tables disappear during the upgrade -
and activate all ODS Objects before the upgrade and run the program RSDG_ODSO_ACTIVATE.
also that with Stack 14 an extended version of this program is available together with the
Program RSUPGRCHECK. If errors occurs, consult also SAP Note 518426 and run transaction
RSSGPCLA for the regeneration of the RSDRO_* Objects.
Recheck whether you have Exported with correct parameters or not -- Try to Re Export the Same with all necessary objects .
Try Note 524554 and 325525 also
Hope it helps and clear

There is no PSA for InfoSource ZOUTNBR_TEXT_CC and source system PCFILE

Hi All
The above subject line shows the error.
I have a custome data source in Development that is ZOUTNBR_TEXT which has a source system PC file.(flatfiles)
when i transported all transfer structures and data sources from Development to Quality, only my transfer rules were not activated. but when i manually activated in Quality it throws with an error
There is no PSA for InfoSource ZOUTNBR_TEXT_CC and source system PCFILE
Please let me know how can i activate my transfer rules.
Archana

Hi,
We also faced the same issue while transporting from dev to QA. We raised a OSS, for which SAP has replied saying that there was some inconsistencies with the infosource and they have repaired the same in debugging mode. The root-cause for the issue is unknown. So they have not given any notes to us.
But meanwhile we created a new data source and transported it. that worked fine.
Regards,
PM

There are no hierarchies for this InfoSource in source system

Hello Gurus,
We have recently created an extractor for the Country hierarchies, these are the steps we took:
SBIW->Settings for Application-Specific DataSources (PI)->Profitability Analysis->Create Hierarchy DataSource (TC: KEB1)
We informed the infoobject 0country and the characteristic KMLAND.
We replicated the datasources, created the transfer rules in our dev. system and loaded the required hierarchy with success.
We transported our requests to our prod. environment. and when creating the infopackage for the hierarchy we get the message "There are no hierarchies for this InfoSource in source system". We have checked in our R/3 system and the hierarquies are there.
Are we missing something in the process so that we may see the available hierarquies?
Thanks!!! Points will be rewarded.

Hi Sumit,
You were correct, the request did not transport the contents of the table TKEBWLH. There is a note from SAP which corrects this problem, note 856895. v02. After applying the note and recreating the request, we manage to see the available hierarchies in our Prod. System.
Thanks for your help!
Regards,
Elder

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

G/L account picked for the "wrong" source system entry

Dear Experts,
in SRM 7.0, Classic Scenario, i am facing the following issue with respect to G/L account determination in the SC:
We have three R/3 systems connected to SRM. All these R/3 systems use the same Material Groups, but the G/L accounts are different in each R/3 system.
In the Table "Determination of G/L Account using product categories", i have maintained the repsective combinations. For each combination of product category and account assignment category, the respective G/L account is defaultet for the respective source system.
But in the shopping cart, the determination of the correct G/L does not always work. When a user enters the shopping cart initially with a line item that is accounted to his default account assignment category, than the correct G/L account for his source system is derived. But if he changes the account assignment category of the line item, than a G/L account from a "wrong" source system is getting picked up from the table.
I have checked the GUIDs of the product categories between "Comm_category" and "bbp_det_account" and they are correct.
What can be the reason for the picking of the G/L account from the wrong source system?
Can the note 1357871 bring the correction?
Thank you very much!

Hello Dima,
I think your problem comes from your source system for product category management.
Could you clarify one point: if you change account assignment category, does new G/L account have to be determined for same backend system too or not ?
If yes, correct new G/L account will be determined using your customizing (IMG: SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Account Assignment > Define G/L Account for Product Category and Account Assignment Category ).
If it does not work, log an OSS message.
If no, you need to switch value for each SC item field BBP_PDIGP-LOGSYS_FI from old backend source system to the new one. For this, use BBP_DOC_CHANGE_BADI.
Then, your customized G/L account definition for product category and account assignment category should be OK.
Regards.
Laurent.

Standard report which gives Record count of ODS, Cube and Source system.

Hi-
Is there any standard report which gives the record count of ODS, Cube and Source system?
or
If any one has ABAP program which takes care of record count pls let me know.
Thanks in advance

I don't understand. You need to check the data loads. What for do you want a list of ODS, Cubes and sources systems?
You can use messages from process chains to monitor the data loads.
You can also use an abap program inside teh process chains to save data into a table and then an abap report to see if everything went OK.
But, thinking again, you may be able to use BW statistics to get some of the information you need. Check the help for BW statistics, it might give you an idea of what you can do.
Regards,
Diego

Configuration Wizard-NW:BI-AS ABAP(Connectivity of BI and Source System): M

Hi friends,
I´m configuring the (NW: BI - AS ABAP (Connectivity of BI and Source System): Maintain) in NWA using Configuration Wizard.
But there is the error in step (NW: BI - AS ABAP (Connectivity of BI and Source System): Maintain > Scenario UI: NW_BI_ABAP_DEFAULT > Scenario Process: Abap Server Integration to BI > Configuration Process > Configuration Unit: Initialize > Config Unit BI System: Initialize > Customizing: Assign Logical System to Client > Write Customizing data to Table T000)
Below error log:
*Write Customizing data to Table T000*
Description:
Exception in step "WriteProfile_1223390220410"
Exception details : com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException: Exception during the import of the profile!
State
Step finished with error
Support Information
Type of Action
WriteProfile
Debug Events
WriteProfile:Write Customizing data to Table T000
Library: sap.com/tclmconfig~bs
SourcePath ./com_sap_nw_bi_abap_default_maintain/ext_12064772269223/ext_1206447991146/Process_1207123636083/proc_1196064316796/Process_1204300420808/proc_1204300371034/WriteProfile_1223390220410
Time 2011/11/03 at 15:36:57
Schema content/NetWeaver/Common/Customizing/Clients/T000.xsd
Type : View Maintenance
Input
<TABLE_T000 xmlns:expr="http:/sap.com/ctc/expressions"><T000><MANDT>100</MANDT><LOGSYS>SOLCLNT100</LOGSYS></T000></TABLE_T000>
Schema
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:vma="http://www.sap.com/ctc/vma"
elementFormDefault="qualified"> <xsd:element name="TABLE_T000" type="TABLE_T000"></xsd:element> <xsd:complexType name="TABLE_T000"> <xsd:sequence> <xsd:element name="T000" type="T000"> <xsd:annotation> <xsd:appinfo
source="http://www.sap.com/ctc"> <vma:vmacontext table="T000" isupdate="false"/> </xsd:appinfo> </xsd:annotation> </xsd:element> </xsd:sequence> </xsd:complexType> <xsd:complexType name="T000"> <xsd:sequence> <xsd:element name="MANDT" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://www.sap.com/ctc"> <vma:vmaproperty column="MANDT"/> </xsd:appinfo>
</xsd:annotation> </xsd:element> <xsd:element name="LOGSYS" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://www.sap.com/ctc"> <vma:vmaproperty column="LOGSYS"></vma:vmaproperty> </xsd:appinfo> </xsd:annotation> </xsd:element
</xsd:sequence> </xsd:complexType> </xsd:schema>
Destination parameters
user : SOLMAN_ADMIN
password : % secure content %
host : cdsolman
sysnr : 01
client : 100
language : en
Stack Trace
Caused by: com.sap.tc.lm.ctc.cul.api.CULServiceException: Exception during the import of the profile!
     at com.sap.tc.lm.ctc.cul.serviceimpl.writeProfile.CULServiceWriteProfileImpl.writeProfile(CULServiceWriteProfileImpl.java:98)
     at com.sap.tc.lm.ctc.cul.serviceimpl.process.WriteProfileControllerImpl.execute(WriteProfileControllerImpl.java:160)
     ... 16 more
Caused by: com.sap.tc.lm.ctc.cul.cpi.context.ConfigurationBrokerException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='xml_parsing_exception', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key xml_parsing_exception
     at com.sap.tc.lm.ctc.cul.broker.BrokerWriteProfileImpl.writeProfile(BrokerWriteProfileImpl.java:79)
     at com.sap.tc.lm.ctc.cul.serviceimpl.writeProfile.CULServiceWriteProfileImpl.writeProfile(CULServiceWriteProfileImpl.java:95)
     ... 17 more
Caused by: com.sap.tc.lm.ctc.provider.vmaprovider.exceptions.VMAProviderBaseException: Incorrect XML
     at com.sap.tc.lm.ctc.provider.vmaprovider.util.VMAUtil.getDocument(VMAUtil.java:349)
     at com.sap.tc.lm.ctc.provider.vmaprovider.util.VMAUtil.setXmlValue(VMAUtil.java:250)
     at com.sap.tc.lm.ctc.provider.vmaprovider.util.JCOProfileExecutorImpl.executeContext(JCOProfileExecutorImpl.java:310)
     at com.sap.tc.lm.ctc.provider.vmaprovider.util.JCOProfileExecutorImpl.executeChildNode(JCOProfileExecutorImpl.java:183)
     at com.sap.tc.lm.ctc.provider.vmaprovider.util.JCOProfileExecutorImpl.executeProfile(JCOProfileExecutorImpl.java:129)
     at com.sap.tc.lm.ctc.provider.vmaprovider.VMAWriteProfile.writeProfile(VMAWriteProfile.java:59)
     at com.sap.tc.lm.ctc.cul.broker.BrokerWriteProfileImpl.writeProfile(BrokerWriteProfileImpl.java:144)
     at com.sap.tc.lm.ctc.cul.broker.BrokerWriteProfileImpl.writeProfile(BrokerWriteProfileImpl.java:73)
Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Incorrect encoded sequence detected at character (hex) 0x6f, (bin) 1101111. Check whether the input parsed contains correctly encoded characters. Encoding used is: 'utf-8'(:main:, row:1, col:637)(:main:, row=1, col=637) -> com.sap.engine.lib.xml.parser.ParserException: Incorrect encoded sequence detected at character (hex) 0x6f, (bin) 1101111. Check whether the input parsed contains correctly encoded characters. Encoding used is: 'utf-8'(:main:, row:1, col:637)
     at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:139)
     at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
     at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:76)
     at com.sap.tc.lm.ctc.provider.vmaprovider.util.VMAUtil.getDocument(VMAUtil.java:341)
Caused by: com.sap.engine.lib.xml.parser.ParserException: Incorrect encoded sequence detected at character (hex) 0x6f, (bin) 1101111. Check whether the input parsed contains correctly encoded characters. Encoding used is: 'utf-8'(:main:, row:1, col:637)
     at com.sap.engine.lib.xml.parser.readers.EncodedDataReader.read(EncodedDataReader.java:209)
     at com.sap.engine.lib.xml.parser.readers.EncodedDataReader.read(EncodedDataReader.java:207)
     at com.sap.engine.lib.xml.parser.helpers.AdvancedXMLStreamReader.read(AdvancedXMLStreamReader.java:143)
All the others steps were finished successfully
Only this step is with error. I don´t know that to do.
Regards,
Ricardo Arriado
Edited by: Ricardo Arriado on Nov 4, 2011 6:24 PM

Hi,
Please double check the JCO user and the authorization.
Or
Apply these two notes, it should resolve ur issue
1493124 CTC: Check table existence before table whitelist
1471762 CTC: Automated Configuration:
Hope this helps u.
Best Regards
Vijay K

How to link bw and source system

Any one has any document about "how to create a link between bw and source system!?
I have tried to create this link, but i haven´t.
I tried to do this: in Rsa1->modeling->source system i choose my source system (SAP) and click with the right bottom and push create. I filled the target computer; system id; system number; i put the password for aleremote user and bwremote user. After that i received a message erro when i save.
thanks.

Hi, to do this you need extensive authorization and an open source system (as in opened in SCC4).
If you are not SAP Basis, perhaps you should ask them.
And in my experience, if they never have seen how BI and SAP Source systems are linked, be ready for an interesting discussion and have all the correct documentation available.
I think the link to the documentation is posted before.
Kind regards,
Jürgen

RFC Adapters for EBP and SUS systems

Hi!
We have Extended Classic Scenario up and running and now configuring SUS integration. We have done SLD configuration already and via TR SLDCHECK (has been executed on SRM server) has seen that XI connection is fine.
Now we have a question whether we need to configure RFC adapters for SUS and EBP systems? If yes, how can we do this?
Best Regards,
Siarhei

you need to define RFC connections between SUS and EBP , only if you want user synchronization between the systems....
connection should be of type --> ABAP CONNECTIONS --> type 3
and this is only optional and not mandatory .
you can find more details at the following customizing entry..
TRANSACTION SPRO
--> Supplier Relationship Management --> Supplier Self-Services --> Master Data --->
Maintain Systems for Synchronization of User Data

No system found for component and Evaluation system in the Project

Hi Folks ,
Im facing this problem when im trying to Execute the T-codes from Solar01 of the Transactins Tab by Selecting the Line item and clicking on Execute button. Following is the Error and there no logs for it.
No system found for component and Evaluation system in the Project
Even i have checked with the RFC settings and Logical components are right
Please do suggest me - This is PRD issue . Try to do the needful .
Thanks in Advance
Amrita
Edited by: Amrita Amrita on Dec 3, 2009 12:53 AM

Hi all,
I've had the same issue with regards to getting the error below when assigning transactions to a Blueprint business process.
"No system found for component and Evaluation system in the Project"
But I think I have solved it and seems pretty simple to change the system role from Evaluation System to any other that is relevant in your landscape.
Go to transaction SOLAR01 > Click on the first level of the Project Name (Under Business Blueprint Structure) to select the Project.
Click Business Blueprint in the Menu > System Role > Choose the relevant System Role (in my case Development)
Click Copy
This should replicate to all nodes and then you should be able to assign transaction to the business processes.
Quite strange and seems simple, I checked the Solution Directory, Solar Project Admin etc etc but couldn't find the solution until this which should work.
If not, there is a similar work around which also works.
Go to transaction SOLAR_PROJECT_ADMIN
System Landsacpe Tab
Systems subtab
Click System Role Assignment
Remove the Evaluation System (or all those not relevant to your Project and Logical Components)
Save Project
Go to SOLAR01 and it should reflect it in the Blueprint.
You can always go back to this and add the System Roles you removed and the Blueprint will reference the correct Role.
Hope this helps everyone,
-Rohan

Different SAPlogon screen for prd and dev systems

Hi!
I would like to distinguish the SAPlogon screen for production and development systems.
For example:i logged into to the SAP system by SAPlogon and i want to see in the right top corner of the screen the letter P or D, etc.
Could you advise me how to do it?
Thank you!
Dan

I think this can be done but little difficult.
After installing your sapgui, you have to change the picture in the right corner which you can find inside the folder programfiles-sap-sapgui and can search in the picture. If you replace the picture with your picture, you can find it there. But i dont think it can be done seperately for dev, qual and prod systems.
With Regards,

NO PSA for InfoSource and source system 120 : Maintaing Transfer Rules

Similar Messages

Maybe you are looking for