NO PUEDO NAVEGAR ATRAVES DE WIFI.AIRPORT

Hola ando muy perdida, resulta que no puedo navegar atraves del airport, he comprovado todos los parametro con mi compañia de ADSL y esta todo correcto, llega señal, pero cuando intento navegar me dice que nada... que no encuentra el servidor, pero si lo conecto por cable si me deja... ¿alguien me puede ayudar con esto? encima el mac es muy nuevo... ayuda!

Hola, esto ha funcionado para algunos ...
Hacer una nueva ubicación, Uso de ubicaciones de red en Mac OS X ...
http://support.apple.com/kb/HT2712
10,7 ...
Preferencias del sistema> Red, la parte superior de la ventana Ubicaciones> Ubicaciones> Editar, poco más icono, darle un nombre.
Instrucciones 10.5.x/10.6.x/10.7.x ...
Preferencias del sistema> Red, haga clic en el engranaje pequeño en la parte inferior al lado de los iconos + y -, (primera cerradura de desbloqueo si está bloqueado), seleccione Establecer orden de servicio.
La interfaz que se conecta a Internet debe ser arrastrada a la parte superior de la lista.
Si se utiliza Aeropuerto / Wifi, En lugar de unirse a su red de la lista, haga clic en el icono de Wi-Fi en la parte superior y haga clic en unirse a la red. Rellene todo cuando sea necesario.
Para 10.5/10.6, Preferencias del sistema> Red, desbloquear el bloqueo si es necesario, poner de relieve la interfaz que utiliza para conectarse a Internet, haga clic en el botón Opciones avanzadas, haga clic en la ficha DNS, haga clic en el pequeño icono plus, a continuación, añadir estos números ...
208.67.222.222
208.67.220.220
Haga clic en Aceptar.
Asimismo, apague IPv6:
Preferencias del sistema »Red» Aeropuerto »ficha TCP / IP» Configure IPv6
O lo que sea la interfaz que utilice.

Similar Messages

Me han instalado fibra optica por movistar, tengo linea wifi pero no puedo navegar gracias

Hola me han istalado fibra optica de movistar en casa, no puedo navegar por internet, pero tengo señal de wifi. Llame a Telefonica y me dijero que siguiera un tutorial de ellos para configurar una parte que es lo del IPV6 y que pusiera la opcion solo enlace local y le di a aplicar y nada. Me han dicho los de Movistar que la linea esta bien, que es problema del portatil. Que puedo hacer? Gracias

Hola y gracias por participar en el foro,
Para tu comodidad, BlackBerry tiene su propio foro comunitario en español:
http://foros.blackberry.com/t5/Foros-de-Soporte-General/ct-p/bscf_es
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mac Mini WiFi (airport) fails after waking from sleep

I recently bought a Mac Mini (Mid 2010 model)...my first Apple computer since my dearly departed IIe. I've been having repeated intermittent issues with the WiFi on this machine.
Owning it for two weeks, then one day it woke from sleep, and decided it no longer knew the password to my wireless network. With everything else in my house on wireless, I knew that the password had not been changed (I am using WPA2). Every time I would retype the password, I would get either a 'Connection Timeout' error, or an 'Incorrect Password' error. Every once in a while it would connect, but it would not get a valid IP.
Restarted the system, and then it tells me there's 'No Airport Card Installed'
Reset PMU/SMU/PRAM (etc) and the airport card comes back, but it STILL will not connect.
I go into keychain, and delete the saved wireless password.
I create a new 'location'.
No go.
So I made a trip with my machine to the Genius bar at my local apple store. Miracle of miracles, it WORKS PERFECTLY from the moment they turn it on. Get it home, it continues to work perfectly. This was Saturday.
This morning, same problem starts again. I was having similar issues with my iPad not connecting to the WiFi when waking from sleep, but this was fixed when I factory reset the iPad. I've never experienced this issue with either of my iPod touches (3rd and 4th gen). I'm not having any wireless problems with my PS3, Wii, Blu-ray player, Android phone, Nook, HP Printer, or Windows laptop.
My router is a D-link F5D8235-4 v2000, with firmware 2.01.09 (latest available)

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.

Mavericks, WiFi, Airport, iTunes

Since I have noticed outages under Snow Leopard, WiFi, Airport Express using iTunes for years and years. I always thought this is a hardware only problem. Not at all as I have noticed. Under Mavericks I haven't noticed this phenomena using iTunes and my "old dropped technology" Airport Express.
So, now we have achieved a state in terms of software and hardware where everything seems to work fine.
However, what Apple is now doing with their new Airport utility. I am no longer able to edit the configuration of my Airport Express device.
This is just as nonsense as "Berliner Beamten Politik".

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

¿Por qué no puedo navegar con mozilla firefox y con internet explorer si?

Me sale un mensaje quedice no se puede conectar en todas las paginas que abro,y con internet explorer si puedo navegar!
ayuda!!

Puedes intentar '''reiniciar firefox'''.
Haz clic en:
https://support.mozilla.org/es/products/firefox?as=u&utm_source=inproduct
Haz clic donde pone ''actualiza firefox'' y dale a ''reiniciar firefox''.
Espero ser de ayuda.

Curve 8520: No puedo navegar

por favor alguien puede ayudarme, todo funciona correctamente con mi curve 8520, recibo mis correos electronicos, puedo entrar al facebook, recibo mensajes del messenger, PERO NO PUEDO NAVEGAR!!! alguien sabe como puedo solucionar este problema??? Muchas gracias

Hola y gracias por participar en el foro,
Para tu comodidad, BlackBerry tiene su propio foro comunitario en español.
Chronos New to the Community click here
Community Moderator

Mac OS X will not connect to wifi, airport is broken, will connect to internet with ethernet cord. Is there an accessory I can buy to replace airport so I don't have to use ethernet cord? Please help!!

Mac OS X will not connect to wifi, airport is broken, will connect to internet with ethernet cord. Is there an accessory I can buy to replace airport so I don't have to use ethernet cord? Please help!!

Since the MacBook Pro currently works, you should put it next to the iMac and compare the network settings for AirPort in System Preferences Network pane Advanced. Also, if you want to start off with the default network settings, you can use Location drop down menu and select +Edit Locations+. Then click the plus sign to create a new location. Set up that new location.
On System Preferences Network pane, AirPort should appear at the top of the list (in the sidebar). To change the service order, click on the gear icon and select +Set Service Order+.
Some additional tests you can try, on top of seeing if it works with (1) WEP security disabled and (2) a direct wired connection to the router.
If you get it to work with either (1) or (2), be sure to run Software Update at least two times to apply any recent updates from Apple. See if that makes any difference to using AirPort with WEP back on.
(3) Start up in Safe Mode
http://support.apple.com/kb/HT1455
I don't know if any third-party software has been installed on the iMac at this point, but Safe Mode will start up with only the essential Apple extensions and processes running. See if it works any better in Safe Mode.
(4) Create a new admin user account in System Preferences Accounts pane
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
Log out and log in to the new account. Try connecting with AirPort in the new account.
(5) Connect the MacBook Pro to the router with a wired Ethernet connection. Make sure its Internet access works. On System Preferences Sharing pane, set it up for +Internet Sharing+ so that it is set to +Share your connection from Ethernet - To computers using AirPort+. On the iMac, try to connect to that wireless network and access the Internet.
That last one (5) may be a good one to try first. It would at least show that the iMac's AirPort is working - you can even set it up to use WEP. If you have any questions about using the +Internal Sharing+ feature, please ask.

Wifi airport to surf and ethernet network access

Sorry if this question has been asked before but I have not found a solution anywhere yet.
Q: How do you set up the airport (wifi) to access the internet to surf the web; while connected to an ethernet network?
Background; this imac is set up at work and can access the public wifi to surf the internet as long as the ethernet cable is unplugged from the back, but to browse the network files and drives and check email to do work the ethernet cable must be plugged in. But its a pain to keep walking around to the back of the mac and plugging in and unplugging the cables.
There has to be a way to set safari to use the airport to access the internet and set mail to use the ethernet ports.
Thanks for the help!

The normal setup would be to an attach a wireless access point to the existing network. Then connect to that device wirelessly. So use something like an airport express. Connect the network cable that normally goes into your mac into the aiport express. Then connect your mac to the airport express wirelessly.

Mac Pro SL Wifi / Airport Problems... big time !

Hey everyone,
im typing this text on my 600 euro sony subnotebook because of wireless problems with my 6 Core Xeon Mac Pro Late 2010 i paid 6024 euros for.
Whats the Problem ?...
My Airport connenction is usual 4 times slower than on every other wifi device on my netgear wnr 2000v2 Router. And extremly instable too... it drops down to 0 bytes per second transfer for over 1 minute peaking at 40kb and dropping down to 0 bytes again... all other devices run at 200 kb/s at least...
I tried so far:
resetting the pram
deleting the System Configuration Folder from /Macintosh HD/ Library/ Preferences....
deleting Keychain Passwords for wifi
deleting all chaches via Cocktail
resetting smc
resetting the router
tried every firmware version on my router
tried different channels on my router
tried every encryption and no encryption on my router
tried b/g/n modes on my router
tried to deactivate quality of service settings on the router
installed a combo update of 10.6.7 snow leopard over the first 10.6.7 installation
nothing worked,increased the bandwith / stability, or it worked ony for a couple off minutes or 2 restarts...
i know these Mac OS X wireless problems since i got my Powerbook G4 in 2005 with Panther and Tiger and Leopard and i cannot believe after 5 Years of Development a Unix based OS has problems with networking... i expect a Unix OS to work like 1+1= 2 and not 1+1=268 on a rainy day, on sunny days its 739... this is what i experienced from windows systems in the past... i have my doubts that 10.6.8 will solve this problem... oh wait, maybe lion will fix this !

If you've never had good WiFi performance from the MP, that suggests a hardware issue, such as a loose antenna connection.

IPad 16gb wifi +airport express. No utilities setup

Hey guys,
Here's my problem. I'm in sao Paulo staying in a room that only has Internet via Ethernet cable.
I currently have an Ipad 16gb and an airpot express. Problem is both of these are new and have never been setup or linked together. When I plug in the airport it blinks amber and I can get Internet service. I don't have a computer to run the disk... Am I totally screwed?
Also I see a
"free public" Internet network when I check my iPads wifi connections. I can connect to it with a strong signal but I can't go online... I get an error saying couldn't connect to the Internet.
I'm totally new to all of this so any help would be totally welcome.
Thanks for the help!
Jorge

No way I know of.
I don't bother if I can't determine who supports the network.
You see a lot of these 'Free Public Wi-Fi' or 'Free Public Network' hotspots in airports. Many of them are hosted on a laptop computer by someone in the concourse looking to steal personal info.
It's not worth it, IMO.

Can't add printers while in WiFi/Airport

I can no longer add printers in Printer Setup Utility while using my WiFi network (AEBS). The <ADD> Button is GRAYED OUT.
Everything is OK when my printer is connected via USB, but in Airport nothing.
When I get the ADD page it shows the correct name of the printer and the correct Location (AEBS) Name. But, the <ADD> Button is GRAYED OUT.
The printer's connection is Bonjour.
I'm not sure whether this started after the AirPort Firmware update 5.6 or the SecUpd2005-007 and SecUpd2005-007Ti.
But AirPort printing did start getting sporadic after SecUpd2005-007 and SecUpd200.5-007Ti.
I did a Reset Printing System when the printer would only print when it felt like it. Still everything was fine until 08-15-05.
I installed the AirPort Firmware update 5.6, the SecUpd2005-007 and the SecUpd200.5-007Ti the same day they appeared.

It's been an ongoing policy that old posts are archived off the system, not least because the likelihood of the post being found and responded to decreases over time.
There is nothing to prevent any poster, including the person who originated the thread, from adding to it to bump it back to the top if it requires further attention, or to post again of course.

Unable to connect to my house wifi (AirPort Extreme) on my dell & roku

I have setup my airport Extreme wifi, i am able to connect wifi on my samsung laptop, my dell studio 1537 and motorola droid phone. However, I am unable to connecte via wifi on my dell latitude e6430 laptop and Roku its not accepting the password i assigned, other devices wifi works except for these. i dont know what else to do.

What model is your AE? What firmware?
As a test.. do the a few more things.
1. Give a different name to 2.4ghz and 5ghz wireless.
2. Set a fixed channel for the 2.4ghz.. use 11, 6, 1 in that order..
3. You may as well also remove the security whilst you do this.
So this is the most compatible you can ever make the AE.. if it fails at 2.4ghz running fixed channel with SMB compliant name and no security.. it is basically incompatible. And will never work.
If it works then immediately put the security back on.. if it then fails try wpa + wpa2 security which is not as good but not bad.. if it still fails, then the device is not compatible.
Simply buy a secondary AP to use with the non-compatible devices.. any old TP-Link N lite for $35 aprox will work great.

Hola soy de venezuela mi ipod tiene activada la opcion de restriccion, y no me recuerdo haberla puesta es decir no me se la clave y necesito meterme para desactivarla ya que no puedo navegar en safari. espero respuesta asap Gracias!

Hola ya envi mi pregunta antes, quisiera saber que puedo hacer i olvide mi contrasena en restricciones.
ya que necesito navegar en Safari y no es posible.... Gracias!

MarisolM wrote:
Hola
Ya que estas enviando a excel un arreglo de strings, es por esto que Excel no las reconoce como números; si envías tus datos como DBL ya no verás este problema.
Puedes ocupar el "Exel Set Cell Format" que usa el formato de excel; # para número, 0 para incluir un número y así sucesivamente o crear tu tabla sin el express VI "Build Table"
Si lo que buscas es hacer una gráfica; ¿porque no la haces directo desde LabVIEW? Puedes ocupar el Excel Easy Graph.
Exito en tu aplicación
Saludos
Opino lo mismo. podrias hacer la grafica en labview y despues la exportas como un jpg or bmp a donde la necesites vizualizar.

Facetime on iPad3 over WIFI - Airport Extreme

Just bought an iPad3 (WIFI only). It connects beautiful to my Airport Extreme network. BUT I´m unable to run Facetime and iMessage. My Apple-ID works fine. The errormessage I get when trying to enable (log on with my Apple ID) Facetime and iMessage: "Could not log on. Check network connection and try again". My new iPad works fine with Safari and Mail on the network. Anybody has a good idea how to solve the problem? Regards Erik.

Try this! It works! https://discussions.apple.com/thread/3010083?start=15&tstart=0

Extension Wifi airport express et Bbox 2?

Bonjour, j'ai fait l'acquisition d'un "airport express" dans le but d'augmenter la portée de mon réseau wifi existant sur ma b-box 2 (Belgacom). Mais voilà le problème est le suivant, il m'est impossible
d'étendre le réseau, j'arrive à connecter le airport express au réseau mais lorsque je choisis dans les préférences de celui-ci d'augmenter la poortée du réseau wifi via le sort airport de mon mac, au moment de la mis à jour du airport express il ne parvient pas à enregistrer les modifications me disant que c'est impossible.
Devrais-je changer une option au sein de ma b-box 2 afin qu'il autorise la portée de son wifi?
Merci d'avance pour vos réponses.

Frankly, there were more problems with firmware 7.4.2....that's why 7.5.2 was added.
When you update to 7.5.2......are you then powering down the entire network, waiting a moment, starting the modem first, then each device one at a time?
You would want to perform a power cycle like this whenever you update any device on a network.
No guarantees, but worth a try.
If you still must use 7.4.2 and you want to get rid of the blinking amber light and messages, post back for instructions.

NO PUEDO NAVEGAR ATRAVES DE WIFI.AIRPORT

Similar Messages

Maybe you are looking for