No Pulseaudio JACK Sink

It seems that I used to have a Pulseaudio JACK Sink option to capture audio straight from pulse. I doesn't seem to exist anymore and I can't sort out why.
As an example I captured an mp3 using:
ffmpeg -f jack -ac 2 -i ffmpegpulsein test.mp3
The xml for ffmpegpulsein's patch was:
<!DOCTYPE patchbay>
<patchbay version="0.3.10" name="ffmpegpulsein">
<output-sockets>
<socket exclusive="off" client="PulseAudio JACK Sink" type="jack-audio" name="PulseAudio JACK Sink">
<plug>front-left</plug>
<plug>front-right</plug>
</socket>
</output-sockets>
<input-sockets>
<socket exclusive="off" client="ffmpegpulsein" type="jack-audio" name="ffmpegpulsein">
<plug>input_1</plug>
<plug>input_2</plug>
</socket>
</input-sockets>
<slots/>
<cables>
<cable output="PulseAudio JACK Sink" input="ffmpegpulsein" type="jack-audio"/>
</cables>
</patchbay>
I no longer have a device to output audio to of this name. How does one capture computer audio output through JACK?

module-jack-sink and -source have been replaced with module-jackdbus-detect in default pulseaudio configuration.
module-jackdbus-detect only works with jack's dbus interface introduced in jack2, not with legacy jackd.
You should be able to still use the old -sink and -source, but you need to set them up yourself in your pulse config.
If you have everything set up correctly, I think you still need to connect pulseaudio output to recording input with jack to record anything.

Similar Messages

  • Dbus and jack2

    after changing the system from utc to localtime, I rebooted and now I get this error when running jack2:
    jack_control start
    --- start
    DBus exception: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

    Update:
    I haven't found out how pacat will play (except for altering its ouput from the soundcard to the pulse sink in pavucontrol), but that wasn't my original problem.
    Actually my problem was that I couldn't play youtube videos when jack was active. The problem was in KDE: I opened "Audio and Video Settings" and in the "Audio Hardware Setup" there is an card called "Independent devices" and its device is the pulseaudio jack sink. If I choose that, youtube works!
    Thanks,
    Stefan

  • Different program's sound sent to different jack ports with Pulseaudio

    Hello,
    I just installed Pulseaudio so I could send the output of different programs to different jacks on my computer, both the jacks on my computer are provided by the same motherboard sound card, one on the front for my headphone and one on the back. So far I haven't been able to see them in pavucontrol I only see a single output.
    Here's the output of "pacmd list"
    Welcome to PulseAudio! Use "help" for usage information.
    >>> Memory blocks currently allocated: 530, size: 1.2 MiB.
    Memory blocks allocated during the whole lifetime: 4140720, size: 2.1 GiB.
    Memory blocks imported from other processes: 125, size: 550.6 KiB.
    Memory blocks exported to other processes: 1, size: 512 B.
    Total sample cache size: 0 B.
    Default sample spec: s16le 2ch 44100Hz
    Default channel map: front-left,front-right
    Default sink name: alsa_output.pci-0000_00_1b.0.analog-stereo
    Default source name: alsa_input.pci-0000_00_1b.0.analog-stereo
    Memory blocks of type POOL: 404 allocated/2532098 accumulated.
    Memory blocks of type POOL_EXTERNAL: 1 allocated/651424 accumulated.
    Memory blocks of type APPENDED: 0 allocated/0 accumulated.
    Memory blocks of type USER: 0 allocated/0 accumulated.
    Memory blocks of type FIXED: 0 allocated/1302521 accumulated.
    Memory blocks of type IMPORTED: 125 allocated/306101 accumulated.
    27 module(s) loaded.
    index: 0
    name: <module-device-restore>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore the volume/mute state of devices"
    module.version = "2.1"
    index: 1
    name: <module-stream-restore>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore the volume/mute/device state of streams"
    module.version = "2.1"
    index: 2
    name: <module-card-restore>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore profile of cards"
    module.version = "2.1"
    index: 3
    name: <module-augment-properties>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "Augment the property sets of streams with additional static information"
    module.version = "2.1"
    index: 4
    name: <module-alsa-card>
    argument: <device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1">
    used: 6
    load once: no
    properties:
    module.author = "Lennart Poettering"
    module.description = "ALSA Card"
    module.version = "2.1"
    index: 5
    name: <module-udev-detect>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "Detect available audio hardware and load matching drivers"
    module.version = "2.1"
    index: 6
    name: <module-jackdbus-detect>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "David Henningsson"
    module.description = "Adds JACK sink/source ports when JACK is started"
    module.version = "2.1"
    index: 7
    name: <module-bluetooth-discover>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Joao Paulo Rechi Vita"
    module.description = "Detect available bluetooth audio devices and load bluetooth audio drivers"
    module.version = "2.1"
    index: 8
    name: <module-esound-protocol-unix>
    argument: <>
    used: -1
    load once: no
    properties:
    module.author = "Lennart Poettering"
    module.description = "ESOUND protocol (UNIX sockets)"
    module.version = "2.1"
    index: 9
    name: <module-native-protocol-unix>
    argument: <>
    used: -1
    load once: no
    properties:
    module.author = "Lennart Poettering"
    module.description = "Native protocol (UNIX sockets)"
    module.version = "2.1"
    index: 10
    name: <module-gconf>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "GConf Adapter"
    module.version = "2.1"
    index: 11
    name: <module-default-device-restore>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore the default sink and source"
    module.version = "2.1"
    index: 12
    name: <module-rescue-streams>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "When a sink/source is removed, try to move their streams to the default sink/source"
    module.version = "2.1"
    index: 13
    name: <module-always-sink>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Colin Guthrie"
    module.description = "Always keeps at least one sink loaded even if it's a null one"
    module.version = "2.1"
    index: 14
    name: <module-intended-roles>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically set device of streams based of intended roles of devices"
    module.version = "2.1"
    index: 15
    name: <module-suspend-on-idle>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "When a sink/source is idle for too long, suspend it"
    module.version = "2.1"
    index: 16
    name: <module-console-kit>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "Create a client for each ConsoleKit session of this user"
    module.version = "2.1"
    index: 17
    name: <module-systemd-login>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "Create a client for each login session of this user"
    module.version = "2.1"
    index: 18
    name: <module-position-event-sounds>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
    module.version = "2.1"
    index: 19
    name: <module-role-cork>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Lennart Poettering"
    module.description = "Mute & cork streams with certain roles while others exist"
    module.version = "2.1"
    index: 20
    name: <module-filter-heuristics>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Colin Guthrie"
    module.description = "Detect when various filters are desirable"
    module.version = "2.1"
    index: 21
    name: <module-filter-apply>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Colin Guthrie"
    module.description = "Load filter sinks automatically when needed"
    module.version = "2.1"
    index: 22
    name: <module-dbus-protocol>
    argument: <>
    used: -1
    load once: yes
    properties:
    module.author = "Tanu Kaskinen"
    module.description = "D-Bus interface"
    module.version = "2.1"
    index: 23
    name: <module-switch-on-port-available>
    argument: <>
    used: -1
    load once: no
    properties:
    index: 24
    name: <module-x11-publish>
    argument: <display=:0.0>
    used: -1
    load once: no
    properties:
    module.author = "Lennart Poettering"
    module.description = "X11 credential publisher"
    module.version = "2.1"
    index: 25
    name: <module-x11-xsmp>
    argument: <display=:0.0 session_manager=local/archpc:@/tmp/.ICE-unix/15374,unix/archpc:/tmp/.ICE-unix/15374>
    used: -1
    load once: no
    properties:
    module.author = "Lennart Poettering"
    module.description = "X11 session management"
    module.version = "2.1"
    index: 26
    name: <module-cli-protocol-unix>
    argument: <>
    used: -1
    load once: no
    properties:
    module.author = "Lennart Poettering"
    module.description = "Command line interface protocol (UNIX sockets)"
    module.version = "2.1"
    1 sink(s) available.
    index: 7
    name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
    state: RUNNING
    suspend cause:
    priority: 9959
    volume: 0: 100% 1: 100%
    0: 0.00 dB 1: 0.00 dB
    balance 0.00
    base volume: 100%
    0.00 dB
    volume steps: 65537
    muted: yes
    current latency: 19.31 ms
    max request: 3 KiB
    max rewind: 344 KiB
    monitor source: 8
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
    Stereo
    used by: 1
    linked by: 3
    configured latency: 20.00 ms; range is 0.50 .. 2000.00 ms
    card: 0 <alsa_card.pci-0000_00_1b.0>
    module: 4
    properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "ALC888 Analog"
    alsa.id = "ALC888 Analog"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "0"
    alsa.card_name = "HDA Intel"
    alsa.long_card_name = "HDA Intel at 0xfbff8000 irq 45"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:1b.0"
    sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
    device.bus = "pci"
    device.vendor.id = "8086"
    device.vendor.name = "Intel Corporation"
    device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
    device.form_factor = "internal"
    device.string = "front:0"
    device.buffering.buffer_size = "352800"
    device.buffering.fragment_size = "176400"
    device.access_mode = "mmap+timer"
    device.profile.name = "analog-stereo"
    device.profile.description = "Analog Stereo"
    device.description = "Built-in Audio Analog Stereo"
    alsa.mixer_name = "Realtek ALC888"
    alsa.components = "HDA:10ec0888,1458a002,00100001"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    ports:
    analog-output: Analog Output (priority 9900, available: unknown)
    properties:
    analog-output-headphones: Headphones (priority 9000, available: yes)
    properties:
    active port: <analog-output-headphones>
    2 source(s) available.
    index: 8
    name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
    driver: <module-alsa-card.c>
    flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: RUNNING
    suspend cause:
    priority: 1950
    volume: 0: 100% 1: 100%
    0: 0.00 dB 1: 0.00 dB
    balance 0.00
    base volume: 100%
    0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max rewind: 344 KiB
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
    Stereo
    used by: 2
    linked by: 2
    configured latency: 20.00 ms; range is 0.50 .. 2000.00 ms
    monitor_of: 7
    card: 0 <alsa_card.pci-0000_00_1b.0>
    module: 4
    properties:
    device.description = "Monitor of Built-in Audio Analog Stereo"
    device.class = "monitor"
    alsa.card = "0"
    alsa.card_name = "HDA Intel"
    alsa.long_card_name = "HDA Intel at 0xfbff8000 irq 45"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:1b.0"
    sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
    device.bus = "pci"
    device.vendor.id = "8086"
    device.vendor.name = "Intel Corporation"
    device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
    device.form_factor = "internal"
    device.string = "0"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    index: 10
    name: <alsa_input.pci-0000_00_1b.0.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: RUNNING
    suspend cause:
    priority: 9959
    volume: 0: 10% 1: 10%
    0: -60.00 dB 1: -60.00 dB
    balance 0.00
    base volume: 10%
    -60.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.09 ms
    max rewind: 0 KiB
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
    Stereo
    used by: 1
    linked by: 1
    configured latency: 20.00 ms; range is 1.00 .. 2000.00 ms
    card: 0 <alsa_card.pci-0000_00_1b.0>
    module: 4
    properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "ALC888 Analog"
    alsa.id = "ALC888 Analog"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "0"
    alsa.card_name = "HDA Intel"
    alsa.long_card_name = "HDA Intel at 0xfbff8000 irq 45"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:1b.0"
    sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
    device.bus = "pci"
    device.vendor.id = "8086"
    device.vendor.name = "Intel Corporation"
    device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
    device.form_factor = "internal"
    device.string = "front:0"
    device.buffering.buffer_size = "352800"
    device.buffering.fragment_size = "176400"
    device.access_mode = "mmap+timer"
    device.profile.name = "analog-stereo"
    device.profile.description = "Analog Stereo"
    device.description = "Built-in Audio Analog Stereo"
    alsa.mixer_name = "Realtek ALC888"
    alsa.components = "HDA:10ec0888,1458a002,00100001"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    ports:
    analog-input-microphone-front: Front Microphone (priority 8500, available: no)
    properties:
    analog-input-microphone-rear: Rear Microphone (priority 8200, available: no)
    properties:
    analog-input-linein: Line In (priority 8100, available: no)
    properties:
    active port: <analog-input-microphone-front>
    9 client(s) logged in.
    index: 0
    driver: <module-systemd-login.c>
    owner module: 17
    properties:
    application.name = "Login Session 2"
    systemd-login.session = "2"
    index: 3
    driver: <module-x11-xsmp.c>
    owner module: 25
    properties:
    application.name = "XSMP Session on xfce4-session as 276d8dfaf-2e31-425c-a448-6e95e23c73a0"
    xsmp.vendor = "xfce4-session"
    xsmp.client.id = "276d8dfaf-2e31-425c-a448-6e95e23c73a0"
    index: 13
    driver: <protocol-native.c>
    owner module: 9
    properties:
    application.name = "wrapper"
    native-protocol.peer = "UNIX socket client"
    native-protocol.version = "26"
    application.process.id = "15869"
    application.process.user = "jordan"
    application.process.host = "archpc"
    application.process.binary = "wrapper"
    window.x11.display = ":0.0"
    application.language = "en_US.UTF-8"
    application.process.machine_id = "3cb559c10be41c9a438615f400000947"
    index: 14
    driver: <protocol-native.c>
    owner module: 9
    properties:
    application.name = "wrapper"
    native-protocol.peer = "UNIX socket client"
    native-protocol.version = "26"
    application.process.id = "15869"
    application.process.user = "jordan"
    application.process.host = "archpc"
    application.process.binary = "wrapper"
    window.x11.display = ":0.0"
    application.language = "en_US.UTF-8"
    application.process.machine_id = "3cb559c10be41c9a438615f400000947"
    index: 15
    driver: <protocol-native.c>
    owner module: 9
    properties:
    application.name = "wrapper"
    native-protocol.peer = "UNIX socket client"
    native-protocol.version = "26"
    application.process.id = "15869"
    application.process.user = "jordan"
    application.process.host = "archpc"
    application.process.binary = "wrapper"
    window.x11.display = ":0.0"
    application.language = "en_US.UTF-8"
    application.process.machine_id = "3cb559c10be41c9a438615f400000947"
    index: 32
    driver: <protocol-native.c>
    owner module: 9
    properties:
    application.name = "PulseAudio Volume Control"
    native-protocol.peer = "UNIX socket client"
    native-protocol.version = "26"
    application.id = "org.PulseAudio.pavucontrol"
    application.icon_name = "audio-card"
    application.version = "1.0"
    application.process.id = "20106"
    application.process.user = "jordan"
    application.process.host = "archpc"
    application.process.binary = "pavucontrol"
    application.language = "en_US.UTF-8"
    window.x11.display = ":0.0"
    application.process.machine_id = "3cb559c10be41c9a438615f400000947"
    index: 40
    driver: <protocol-native.c>
    owner module: 9
    properties:
    application.name = "PulseAudio Volume Control"
    native-protocol.peer = "UNIX socket client"
    native-protocol.version = "26"
    window.x11.display = ":0.0"
    window.x11.screen = "0"
    application.process.id = "20106"
    application.process.user = "jordan"
    application.process.host = "archpc"
    application.process.binary = "pavucontrol"
    application.language = "en_US.UTF-8"
    application.process.machine_id = "3cb559c10be41c9a438615f400000947"
    application.icon_name = "multimedia-volume-control"
    index: 57
    driver: <protocol-native.c>
    owner module: 9
    properties:
    application.name = "Clementine"
    native-protocol.peer = "UNIX socket client"
    native-protocol.version = "26"
    application.process.id = "15910"
    application.process.user = "jordan"
    application.process.host = "archpc"
    application.process.binary = "clementine"
    application.language = "en_US.UTF-8"
    window.x11.display = ":0.0"
    application.process.machine_id = "3cb559c10be41c9a438615f400000947"
    application.icon_name = "application-x-clementine"
    index: 58
    driver: <cli.c>
    owner module: 26
    properties:
    application.name = "UNIX socket client"
    1 card(s) available.
    index: 0
    name: <alsa_card.pci-0000_00_1b.0>
    driver: <module-alsa-card.c>
    owner module: 4
    properties:
    alsa.card = "0"
    alsa.card_name = "HDA Intel"
    alsa.long_card_name = "HDA Intel at 0xfbff8000 irq 45"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:1b.0"
    sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
    device.bus = "pci"
    device.vendor.id = "8086"
    device.vendor.name = "Intel Corporation"
    device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
    device.form_factor = "internal"
    device.string = "0"
    device.description = "Built-in Audio"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    profiles:
    output:analog-stereo: Analog Stereo Output (priority 6000)
    output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060)
    output:analog-stereo+input:iec958-stereo: Analog Stereo Output + Digital Stereo (IEC958) Input (priority 6055)
    output:analog-surround-40: Analog Surround 4.0 Output (priority 700)
    output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 760)
    output:analog-surround-40+input:iec958-stereo: Analog Surround 4.0 Output + Digital Stereo (IEC958) Input (priority 755)
    output:analog-surround-41: Analog Surround 4.1 Output (priority 800)
    output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (priority 860)
    output:analog-surround-41+input:iec958-stereo: Analog Surround 4.1 Output + Digital Stereo (IEC958) Input (priority 855)
    output:analog-surround-50: Analog Surround 5.0 Output (priority 700)
    output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (priority 760)
    output:analog-surround-50+input:iec958-stereo: Analog Surround 5.0 Output + Digital Stereo (IEC958) Input (priority 755)
    output:analog-surround-51: Analog Surround 5.1 Output (priority 800)
    output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (priority 860)
    output:analog-surround-51+input:iec958-stereo: Analog Surround 5.1 Output + Digital Stereo (IEC958) Input (priority 855)
    output:analog-surround-71: Analog Surround 7.1 Output (priority 700)
    output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (priority 760)
    output:analog-surround-71+input:iec958-stereo: Analog Surround 7.1 Output + Digital Stereo (IEC958) Input (priority 755)
    output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500)
    output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5560)
    output:iec958-stereo+input:iec958-stereo: Digital Stereo Duplex (IEC958) (priority 5555)
    input:analog-stereo: Analog Stereo Input (priority 60)
    input:iec958-stereo: Digital Stereo (IEC958) Input (priority 55)
    off: Off (priority 0)
    active profile: <output:analog-stereo+input:analog-stereo>
    sinks:
    alsa_output.pci-0000_00_1b.0.analog-stereo/#7: Built-in Audio Analog Stereo
    sources:
    alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#8: Monitor of Built-in Audio Analog Stereo
    alsa_input.pci-0000_00_1b.0.analog-stereo/#10: Built-in Audio Analog Stereo
    ports:
    analog-output: Analog Output (priority 9900, available: unknown)
    properties:
    analog-output-headphones: Headphones (priority 9000, available: yes)
    properties:
    analog-input-microphone-front: Front Microphone (priority 8500, available: no)
    properties:
    analog-input-microphone-rear: Rear Microphone (priority 8200, available: no)
    properties:
    analog-input-linein: Line In (priority 8100, available: no)
    properties:
    iec958-stereo-input: iec958-stereo-input (priority 0, available: unknown)
    properties:
    iec958-stereo-output: Digital Output (S/PDIF) (priority 0, available: unknown)
    properties:
    1 sink input(s) available.
    index: 90
    driver: <protocol-native.c>
    flags: START_CORKED
    state: RUNNING
    sink: 7 <alsa_output.pci-0000_00_1b.0.analog-stereo>
    volume: 0: 100% 1: 100%
    0: 0.00 dB 1: 0.00 dB
    balance 0.00
    muted: no
    current latency: 89.86 ms
    requested latency: 90.00 ms
    sample spec: float32le 2ch 44100Hz
    channel map: front-left,front-right
    Stereo
    resample method: copy
    module: 9
    client: 57 <Clementine>
    properties:
    media.name = "'Summertime' by 'Sex Bob-omb'"
    application.name = "Clementine"
    native-protocol.peer = "UNIX socket client"
    native-protocol.version = "26"
    application.process.id = "15910"
    application.process.user = "jordan"
    application.process.host = "archpc"
    application.process.binary = "clementine"
    application.language = "en_US.UTF-8"
    window.x11.display = ":0.0"
    application.process.machine_id = "3cb559c10be41c9a438615f400000947"
    application.icon_name = "application-x-clementine"
    module-stream-restore.id = "sink-input-by-application-name:Clementine"
    media.title = "Summertime"
    media.artist = "Sex Bob-omb"
    3 source outputs(s) available.
    index: 48
    driver: <protocol-native.c>
    flags: DONT_MOVE
    state: RUNNING
    source: 8 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
    volume: 0: 100%
    0: 0.00 dB
    balance 0.00
    muted: no
    current latency: 9.68 ms
    requested latency: 20.00 ms
    sample spec: float32le 1ch 25Hz
    channel map: mono
    Mono
    resample method: peaks
    owner module: 9
    client: 32 <PulseAudio Volume Control>
    properties:
    media.name = "Peak detect"
    application.name = "PulseAudio Volume Control"
    native-protocol.peer = "UNIX socket client"
    native-protocol.version = "26"
    application.id = "org.PulseAudio.pavucontrol"
    application.icon_name = "audio-card"
    application.version = "1.0"
    application.process.id = "20106"
    application.process.user = "jordan"
    application.process.host = "archpc"
    application.process.binary = "pavucontrol"
    application.language = "en_US.UTF-8"
    window.x11.display = ":0.0"
    application.process.machine_id = "3cb559c10be41c9a438615f400000947"
    module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 51
    driver: <protocol-native.c>
    flags: DONT_MOVE
    state: RUNNING
    source: 10 <alsa_input.pci-0000_00_1b.0.analog-stereo>
    volume: 0: 10%
    0: -60.00 dB
    balance 0.00
    muted: no
    current latency: 0.00 ms
    requested latency: 20.00 ms
    sample spec: float32le 1ch 25Hz
    channel map: mono
    Mono
    resample method: peaks
    owner module: 9
    client: 32 <PulseAudio Volume Control>
    properties:
    media.name = "Peak detect"
    application.name = "PulseAudio Volume Control"
    native-protocol.peer = "UNIX socket client"
    native-protocol.version = "26"
    application.id = "org.PulseAudio.pavucontrol"
    application.icon_name = "audio-card"
    application.version = "1.0"
    application.process.id = "20106"
    application.process.user = "jordan"
    application.process.host = "archpc"
    application.process.binary = "pavucontrol"
    application.language = "en_US.UTF-8"
    window.x11.display = ":0.0"
    application.process.machine_id = "3cb559c10be41c9a438615f400000947"
    module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    index: 58
    driver: <protocol-native.c>
    flags: DONT_MOVE
    state: RUNNING
    source: 8 <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor>
    volume: 0: 100%
    0: 0.00 dB
    balance 0.00
    muted: no
    current latency: 9.71 ms
    requested latency: 20.00 ms
    sample spec: float32le 1ch 25Hz
    channel map: mono
    Mono
    resample method: peaks
    owner module: 9
    client: 32 <PulseAudio Volume Control>
    direct on input: 90
    properties:
    media.name = "Peak detect"
    application.name = "PulseAudio Volume Control"
    native-protocol.peer = "UNIX socket client"
    native-protocol.version = "26"
    application.id = "org.PulseAudio.pavucontrol"
    application.icon_name = "audio-card"
    application.version = "1.0"
    application.process.id = "20106"
    application.process.user = "jordan"
    application.process.host = "archpc"
    application.process.binary = "pavucontrol"
    application.language = "en_US.UTF-8"
    window.x11.display = ":0.0"
    application.process.machine_id = "3cb559c10be41c9a438615f400000947"
    module-stream-restore.id = "source-output-by-application-id:org.PulseAudio.pavucontrol"
    0 cache entrie(s) available.
    Thanks!

    Did you ever figure this out?  I am in the same situation and cannot figure out how to refer to specific ports on the same motherboard.
    https://wiki.archlinux.org/index.php/Pu … ont.2Frear looks promising.  However I forget whether one of my cords is plugged in to the rear jack or the center jack, and moving my desktop to look is a little involved.  Oh well, next time the need arises I will experiment further.
    Last edited by rosshadden (2014-03-06 03:22:47)

  • No sound with Pulseaudio, while it's working with ALSA only

    Hi!
    I have no sound when pulseaudio is running, while sound works great using ALSA only, i.e. when I kill pulseaudio.
    In pavucontrol, the volume meter is working in the "Playback" tab, but not in the "Output devices" tab. Is this normal?
    I've tried changing the default sink in pulseaudio's config, did not work.
    I've tried different kernels as well as different pulseaudio versions, but it looks like the issue comes from the configuration. Note that the Arch install is fairly old (~3 years), and since this is not my own machine, I am not fully aware about all what happened in /etc. I'm using the default /etc/asound.conf and /etc/pulse/*.
    From what I can remember, Pulseaudio was working well at the beginning (i.e. 3 years ago), and I can tell for sure that it stopped working at least a year ago. I cannot tell what happened in between since I have not been using the machine.
    I have one onboard card + one HDMI card.
    $ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    Other details:
    # fuser -v /dev/snd/*
    USER PID ACCESS COMMAND
    /dev/snd/controlC0: peter 3090 F.... pulseaudio
    /dev/snd/controlC1: peter 3090 F.... pulseaudio
    /dev/snd/pcmC0D0c: peter 3090 F...m pulseaudio
    /dev/snd/pcmC0D0p: peter 3090 F...m pulseaudio
    /dev/snd/pcmC1D3p: peter 3090 F...m pulseaudio
    And pulseaudio's log:
    $ pulseaudio -vvvv
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: RealtimeKit worked.
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 5.0
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
    D: [pulseaudio] main.c: Running on host: Linux x86_64 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014
    D: [pulseaudio] main.c: Found 4 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I: [pulseaudio] main.c: Machine ID is cb48809d0ce9a381d9d11fe60000021f.
    I: [pulseaudio] main.c: Session ID is c1.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/peter/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 MMXEXT 3DNOW 3DNOWEXT
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/peter/.config/pulse/cb48809d0ce9a381d9d11fe60000021f-device-volumes.tdb'
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/peter/.config/pulse/cb48809d0ce9a381d9d11fe60000021f-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/peter/.config/pulse/cb48809d0ce9a381d9d11fe60000021f-stream-volumes.tdb'
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/peter/.config/pulse/cb48809d0ce9a381d9d11fe60000021f-stream-volumes'.
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/peter/.config/pulse/cb48809d0ce9a381d9d11fe60000021f-card-database.tdb'
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/peter/.config/pulse/cb48809d0ce9a381d9d11fe60000021f-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-udev-detect.so': success
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1 is busy: no
    D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
    D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus 20d90357267ddae6a34aca265354c587 as :1.56
    D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI HDMI/HDA ATI HDMI.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI HDMI
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI HDMI use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI HDMI
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
    D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-4-channel-input
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog 4-channel Input (analog-4-channel-input)
    D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-4-channel-input
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-4-channel-input - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
    D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-mono - will not be able to open output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-stereo - will not be able to open output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-4-channel-input - will not be able to open output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:iec958-stereo - will not be able to open output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
    D: [pulseaudio] alsa-util.c: Trying surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-mono - will not be able to open output:analog-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-stereo - will not be able to open output:analog-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-4-channel-input - will not be able to open output:analog-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:iec958-stereo - will not be able to open output:analog-surround-40
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
    D: [pulseaudio] alsa-util.c: Trying surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-41
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-mono - will not be able to open output:analog-surround-41
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-stereo - will not be able to open output:analog-surround-41
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-4-channel-input - will not be able to open output:analog-surround-41
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:iec958-stereo - will not be able to open output:analog-surround-41
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
    D: [pulseaudio] alsa-util.c: Trying surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-50
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-mono - will not be able to open output:analog-surround-50
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-stereo - will not be able to open output:analog-surround-50
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-4-channel-input - will not be able to open output:analog-surround-50
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:iec958-stereo - will not be able to open output:analog-surround-50
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
    D: [pulseaudio] alsa-util.c: Trying surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-mono - will not be able to open output:analog-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-stereo - will not be able to open output:analog-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-4-channel-input - will not be able to open output:analog-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:iec958-stereo - will not be able to open output:analog-surround-51
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
    D: [pulseaudio] alsa-util.c: Trying surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-71
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-mono - will not be able to open output:analog-surround-71
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-stereo - will not be able to open output:analog-surround-71
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-4-channel-input - will not be able to open output:analog-surround-71
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:iec958-stereo - will not be able to open output:analog-surround-71
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
    D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-mono - will not be able to open output:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-stereo - will not be able to open output:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-4-channel-input - will not be able to open output:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:iec958-stereo - will not be able to open output:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
    D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-mono - will not be able to open output:iec958-ac3-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-stereo - will not be able to open output:iec958-ac3-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-4-channel-input - will not be able to open output:iec958-ac3-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-40
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
    D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-mono - will not be able to open output:iec958-ac3-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-stereo - will not be able to open output:iec958-ac3-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-4-channel-input - will not be able to open output:iec958-ac3-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-51
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
    D: [pulseaudio] alsa-util.c: Trying dca:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-dts-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-mono - will not be able to open output:iec958-dts-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-stereo - will not be able to open output:iec958-dts-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-4-channel-input - will not be able to open output:iec958-dts-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:iec958-stereo - will not be able to open output:iec958-dts-surround-51
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
    D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo supported.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-0'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=3 Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
    D: [pulseaudio] alsa-mixer.c: Path Set 0xbfa1e0, direction=1
    D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
    D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-mono - will not be able to open input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-stereo - will not be able to open input:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-4-channel-input - will not be able to open input:analog-4-channel-input
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Profile set 0xbaf0a0, auto_profiles=yes, probed=yes, n_mappings=1, n_profiles=1, n_decibel_fixes=0
    D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo (Digital Stereo (HDMI)), priority=54, channel_map=front-left,front-right, supported=yes, direction=1
    D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo (Digital Stereo (HDMI) Output), priority=5400, supported=yes n_input_mappings=0, n_output_mappings=1
    D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
    I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
    D: [pulseaudio] module-alsa-card.c: Found 1 jacks.
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' is now unplugged
    D: [pulseaudio] device-port.c: Setting port hdmi-output-0 to status no
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-0
    D: [pulseaudio] reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio1'
    D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    D: [pulseaudio] alsa-mixer.c: Added 1 ports
    I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_01_00.1.hdmi-stereo.
    D: [pulseaudio] module-switch-on-port-available.c: Switching initial port for sink 'alsa_output.pci-0000_01_00.1.hdmi-stereo' to 'hdmi-output-0'
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "HDA ATI HDMI"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe9bc000 irq 45"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "1002"
    I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] sink.c: device.product.id = "aa58"
    I: [pulseaudio] sink.c: device.product.name = "Juniper HDMI Audio [Radeon HD 5700 Series]"
    I: [pulseaudio] sink.c: device.string = "hdmi:1"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: device.description = "Juniper HDMI Audio [Radeon HD 5700 Series] Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
    I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100200"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of Juniper HDMI Audio [Radeon HD 5700 Series] Digital Stereo (HDMI)"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "1"
    I: [pulseaudio] source.c: alsa.card_name = "HDA ATI HDMI"
    I: [pulseaudio] source.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe9bc000 irq 45"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "1002"
    I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] source.c: device.product.id = "aa58"
    I: [pulseaudio] source.c: device.product.name = "Juniper HDMI Audio [Radeon HD 5700 Series]"
    I: [pulseaudio] source.c: device.string = "1"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
    D: [pulseaudio] alsa-sink.c: setting avail_min=87310
    D: [pulseaudio] alsa-mixer.c: Activating path hdmi-output-0
    D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
    D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
    D: [pulseaudio] alsa-util.c: snd_pcm_dump():
    D: [pulseaudio] alsa-util.c: Hooks PCM
    D: [pulseaudio] alsa-util.c: Its setup is:
    D: [pulseaudio] alsa-util.c: stream : PLAYBACK
    D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
    D: [pulseaudio] alsa-util.c: format : S16_LE
    D: [pulseaudio] alsa-util.c: subformat : STD
    D: [pulseaudio] alsa-util.c: channels : 2
    D: [pulseaudio] alsa-util.c: rate : 44100
    D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
    D: [pulseaudio] alsa-util.c: msbits : 16
    D: [pulseaudio] alsa-util.c: buffer_size : 88192
    D: [pulseaudio] alsa-util.c: period_size : 44096
    D: [pulseaudio] alsa-util.c: period_time : 999909
    D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
    D: [pulseaudio] alsa-util.c: period_step : 1
    D: [pulseaudio] alsa-util.c: avail_min : 87310
    D: [pulseaudio] alsa-util.c: period_event : 0
    D: [pulseaudio] alsa-util.c: start_threshold : -1
    D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
    D: [pulseaudio] alsa-util.c: silence_threshold: 0
    D: [pulseaudio] alsa-util.c: silence_size : 0
    D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
    D: [pulseaudio] alsa-util.c: Slave: Hardware PCM card 1 'HDA ATI HDMI' device 3 subdevice 0
    D: [pulseaudio] alsa-util.c: Its setup is:
    D: [pulseaudio] alsa-util.c: stream : PLAYBACK
    D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
    D: [pulseaudio] alsa-util.c: format : S16_LE
    D: [pulseaudio] alsa-util.c: subformat : STD
    D: [pulseaudio] alsa-util.c: channels : 2
    D: [pulseaudio] alsa-util.c: rate : 44100
    D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
    D: [pulseaudio] alsa-util.c: msbits : 16
    D: [pulseaudio] alsa-util.c: buffer_size : 88192
    D: [pulseaudio] alsa-util.c: period_size : 44096
    D: [pulseaudio] alsa-util.c: period_time : 999909
    D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
    D: [pulseaudio] alsa-util.c: period_step : 1
    D: [pulseaudio] alsa-util.c: avail_min : 87310
    D: [pulseaudio] alsa-util.c: period_event : 0
    D: [pulseaudio] alsa-util.c: start_threshold : -1
    D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
    D: [pulseaudio] alsa-util.c: silence_threshold: 0
    D: [pulseaudio] alsa-util.c: silence_size : 0
    D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
    D: [pulseaudio] alsa-util.c: appl_ptr : 0
    D: [pulseaudio] alsa-util.c: hw_ptr : 0
    D: [alsa-sink-HDMI 0] alsa-sink.c: Thread starting up
    D: [alsa-sink-HDMI 0] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [pulseaudio] alsa-util.c: ELD info empty (for device=3)
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:14.2/sound/card0 is busy: no
    D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
    D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI SB/HDA ATI SB.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI SB
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI SB use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI SB
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open front:0
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo supported.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-front-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-rear-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-internal-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Internal Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-internal-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-dock-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-dock-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-aux'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-tvtuner'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-fm'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic-line'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headphone-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Auto-Mute Mode' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headphone-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headset-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headset-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
    D: [pulseaudio] alsa-mixer.c: Path Set 0xbefc80, direction=2
    D: [pulseaudio] alsa-mixer.c: Path analog-input-front-mic (Front Microphone), direction=2, priority=85, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-16.5, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Front Mic (analog-input-microphone-front/analog-input-microphone-front) index=0, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic Phantom, alsa_name='Front Mic Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-front (analog-input-microphone-front) priority=0
    D: [pulseaudio] alsa-mixer.c: Path analog-input-rear-mic (Rear Micr

    Logging from a TTY or from a DM did not change anything: still no sound.
    I've tried to reset all sound-related files in /etc as much as I could. Still no success.
    Since I've been experiencing this issue for months and I'm totally getting out of clue, I decided to go the lame way and to install another Arch on a separate partition. This one was working out-of-the-box with Pulseaudio.
    Then I've tried to make both systems similar: same configuration, same kernel, same packages, same users, etc.
    The new one was still working, the other one not.
    Some logs of the new system:
    $ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    Note that the Subdecives are different.
    $ pulseaudio -vvvv
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: RealtimeKit worked.
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 5.0
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
    D: [pulseaudio] main.c: Running on host: Linux x86_64 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014
    D: [pulseaudio] main.c: Found 4 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I: [pulseaudio] main.c: Machine ID is e58b9d41dfc1494e919c538133947f1d.
    I: [pulseaudio] main.c: Session ID is c2.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/peter/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 MMXEXT 3DNOW 3DNOWEXT
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/peter/.config/pulse/e58b9d41dfc1494e919c538133947f1d-device-volumes.tdb'
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/peter/.config/pulse/e58b9d41dfc1494e919c538133947f1d-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/peter/.config/pulse/e58b9d41dfc1494e919c538133947f1d-stream-volumes.tdb'
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/peter/.config/pulse/e58b9d41dfc1494e919c538133947f1d-stream-volumes'.
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/peter/.config/pulse/e58b9d41dfc1494e919c538133947f1d-card-database.tdb'
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/peter/.config/pulse/e58b9d41dfc1494e919c538133947f1d-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-udev-detect.so': success
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1 is busy: no
    D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
    D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus c494a4ec75f557f0ee2222b75355750d as :1.22
    D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI HDMI/HDA ATI HDMI.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI HDMI
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI HDMI use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI HDMI
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
    D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-4-channel-input
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog 4-channel Input (analog-4-channel-input)
    D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-4-channel-input
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-4-channel-input - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
    D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-mono - will not be able to open output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-stereo - will not be able to open output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-4-channel-input - will not be able to open output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:iec958-stereo - will not be able to open output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
    D: [pulseaudio] alsa-util.c: Trying surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-mono - will not be able to open output:analog-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-stereo - will not be able to open output:analog-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-4-channel-input - will not be able to open output:analog-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:iec958-stereo - will not be able to open output:analog-surround-40
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
    D: [pulseaudio] alsa-util.c: Trying surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-41
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-mono - will not be able to open output:analog-surround-41
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-stereo - will not be able to open output:analog-surround-41
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-4-channel-input - will not be able to open output:analog-surround-41
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:iec958-stereo - will not be able to open output:analog-surround-41
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
    D: [pulseaudio] alsa-util.c: Trying surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-50
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-mono - will not be able to open output:analog-surround-50
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-stereo - will not be able to open output:analog-surround-50
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-4-channel-input - will not be able to open output:analog-surround-50
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:iec958-stereo - will not be able to open output:analog-surround-50
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
    D: [pulseaudio] alsa-util.c: Trying surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-mono - will not be able to open output:analog-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-stereo - will not be able to open output:analog-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-4-channel-input - will not be able to open output:analog-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:iec958-stereo - will not be able to open output:analog-surround-51
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
    D: [pulseaudio] alsa-util.c: Trying surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-71
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-mono - will not be able to open output:analog-surround-71
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-stereo - will not be able to open output:analog-surround-71
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-4-channel-input - will not be able to open output:analog-surround-71
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:iec958-stereo - will not be able to open output:analog-surround-71
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
    D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-mono - will not be able to open output:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-stereo - will not be able to open output:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-4-channel-input - will not be able to open output:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:iec958-stereo - will not be able to open output:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
    D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-mono - will not be able to open output:iec958-ac3-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-stereo - will not be able to open output:iec958-ac3-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-4-channel-input - will not be able to open output:iec958-ac3-surround-40
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-40
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
    D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-mono - will not be able to open output:iec958-ac3-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-stereo - will not be able to open output:iec958-ac3-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-4-channel-input - will not be able to open output:iec958-ac3-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-51
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
    D: [pulseaudio] alsa-util.c: Trying dca:1 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-dts-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-mono - will not be able to open output:iec958-dts-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-stereo - will not be able to open output:iec958-dts-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-4-channel-input - will not be able to open output:iec958-dts-surround-51
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:iec958-stereo - will not be able to open output:iec958-dts-surround-51
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
    D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo supported.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-0'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=3 Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
    D: [pulseaudio] alsa-mixer.c: Path Set 0x1a06130, direction=1
    D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
    D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-mono - will not be able to open input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-stereo - will not be able to open input:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-4-channel-input - will not be able to open input:analog-4-channel-input
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Profile set 0x19bb000, auto_profiles=yes, probed=yes, n_mappings=1, n_profiles=1, n_decibel_fixes=0
    D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo (Digital Stereo (HDMI)), priority=54, channel_map=front-left,front-right, supported=yes, direction=1
    D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo (Digital Stereo (HDMI) Output), priority=5400, supported=yes n_input_mappings=0, n_output_mappings=1
    D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
    I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
    D: [pulseaudio] module-alsa-card.c: Found 1 jacks.
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' is now unplugged
    D: [pulseaudio] device-port.c: Setting port hdmi-output-0 to status no
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-0
    D: [pulseaudio] reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio1'
    D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    D: [pulseaudio] alsa-mixer.c: Added 1 ports
    I: [pulseaudio] module-device-restore.c: Restoring port for sink sink:alsa_output.pci-0000_01_00.1.hdmi-stereo.
    D: [pulseaudio] module-switch-on-port-available.c: Switching initial port for sink 'alsa_output.pci-0000_01_00.1.hdmi-stereo' to 'hdmi-output-0'
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "HDA ATI HDMI"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe9bc000 irq 46"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "1002"
    I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] sink.c: device.product.id = "aa58"
    I: [pulseaudio] sink.c: device.product.name = "Juniper HDMI Audio [Radeon HD 5700 Series]"
    I: [pulseaudio] sink.c: device.string = "hdmi:1"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: device.description = "Juniper HDMI Audio [Radeon HD 5700 Series] Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
    I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100200"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of Juniper HDMI Audio [Radeon HD 5700 Series] Digital Stereo (HDMI)"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "1"
    I: [pulseaudio] source.c: alsa.card_name = "HDA ATI HDMI"
    I: [pulseaudio] source.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe9bc000 irq 46"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "1002"
    I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] source.c: device.product.id = "aa58"
    I: [pulseaudio] source.c: device.product.name = "Juniper HDMI Audio [Radeon HD 5700 Series]"
    I: [pulseaudio] source.c: device.string = "1"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
    D: [pulseaudio] alsa-sink.c: setting avail_min=87310
    D: [pulseaudio] alsa-mixer.c: Activating path hdmi-output-0
    D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
    D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP,pcm=3, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
    D: [pulseaudio] alsa-util.c: snd_pcm_dump():
    D: [pulseaudio] alsa-util.c: Hooks PCM
    D: [pulseaudio] alsa-util.c: Its setup is:
    D: [pulseaudio] alsa-util.c: stream : PLAYBACK
    D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
    D: [pulseaudio] alsa-util.c: format : S16_LE
    D: [pulseaudio] alsa-util.c: subformat : STD
    D: [pulseaudio] alsa-util.c: channels : 2
    D: [pulseaudio] alsa-util.c: rate : 44100
    D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
    D: [pulseaudio] alsa-util.c: msbits : 16
    D: [pulseaudio] alsa-util.c: buffer_size : 88192
    D: [pulseaudio] alsa-util.c: period_size : 44096
    D: [pulseaudio] alsa-util.c: period_time : 999909
    D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
    D: [pulseaudio] alsa-util.c: period_step : 1
    D: [pulseaudio] alsa-util.c: avail_min : 87310
    D: [pulseaudio] alsa-util.c: period_event : 0
    D: [pulseaudio] alsa-util.c: start_threshold : -1
    D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
    D: [pulseaudio] alsa-util.c: silence_threshold: 0
    D: [pulseaudio] alsa-util.c: silence_size : 0
    D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
    D: [pulseaudio] alsa-util.c: Slave: Hardware PCM card 1 'HDA ATI HDMI' device 3 subdevice 0
    D: [pulseaudio] alsa-util.c: Its setup is:
    D: [pulseaudio] alsa-util.c: stream : PLAYBACK
    D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
    D: [pulseaudio] alsa-util.c: format : S16_LE
    D: [pulseaudio] alsa-util.c: subformat : STD
    D: [pulseaudio] alsa-util.c: channels : 2
    D: [pulseaudio] alsa-util.c: rate : 44100
    D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
    D: [pulseaudio] alsa-util.c: msbits : 16
    D: [pulseaudio] alsa-util.c: buffer_size : 88192
    D: [pulseaudio] alsa-util.c: period_size : 44096
    D: [pulseaudio] alsa-util.c: period_time : 999909
    D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
    D: [pulseaudio] alsa-util.c: period_step : 1
    D: [pulseaudio] alsa-util.c: avail_min : 87310
    D: [pulseaudio] alsa-util.c: period_event : 0
    D: [pulseaudio] alsa-util.c: start_threshold : -1
    D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
    D: [pulseaudio] alsa-util.c: silence_threshold: 0
    D: [pulseaudio] alsa-util.c: silence_size : 0
    D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
    D: [pulseaudio] alsa-util.c: appl_ptr : 0
    D: [pulseaudio] alsa-util.c: hw_ptr : 0
    D: [alsa-sink-HDMI 0] alsa-sink.c: Thread starting up
    D: [alsa-sink-HDMI 0] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [pulseaudio] alsa-util.c: ELD info empty (for device=3)
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:14.2/sound/card0 is busy: no
    D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
    D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI SB/HDA ATI SB.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI SB
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI SB use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI SB
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open front:0
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo supported.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-front-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-rear-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-internal-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Internal Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-internal-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-dock-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-dock-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-aux'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-tvtuner'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-fm'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic-line'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headphone-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Auto-Mute Mode' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headphone-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headset-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headset-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
    D: [pulseaudio] alsa-mixer.c: Path Set 0x19f6940, direction=2
    D: [pulseaudio] alsa-mixer.c: Path analog-input-front-mic (Front Microphone), direction=2, priority=85, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-16.5, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Front Mic (analog-input-microphone-front/analog-input-microphone-front) index=0, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic Phantom, alsa_name='Front Mic Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-front (analog-input-microphone-front) priority=0
    D: [pulseaudio] alsa-mixer.c: Path analog-input-rear-mic (Rear Microphone), direction=2, priority=82, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-16.5, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mas

  • [Solved] No sound (using Gnome with Pulseaudio)

    Hello,
    I have an issue with my audio. Since yesterday it has not been working, as in no sound in my headphones
    I updated gnome, cinnamon and linux yesterday. I did not however update pulseaudio or anything else alsa related (as far as I can tell).
    Another possible cause could be switching from cinnamon to gnome which I did yesterday (I don't know when exactly my audio stopped working).
    Other relevant facts:
    -My mic is still working fine
    -Using the Xonar DG sound card
    -Nothing is muted in alsamixer
    -not a hardware issue, working fine in dual boot windows
    Pulse audio in verbose mode suggest that the issue is not pulseaudio (as does pavucontrol's visualization):
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 5.0
    I: [pulseaudio] main.c: Page size is 4096 bytes
    I: [pulseaudio] main.c: Machine ID is 16327981f21a4906af3310ebf24dab15.
    I: [pulseaudio] main.c: Session ID is c1.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/username/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-stream-volumes'.
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/username/.config/pulse/16327981f21a4906af3310ebf24dab15-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA NVidia/HDA NVidia.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA NVidia
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA NVidia use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA NVidia
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
    I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:0.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "0"
    I: [pulseaudio] sink.c: alsa.card_name = "HDA NVidia"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HDA NVidia at 0xfeaf8000 irq 19"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "10de"
    I: [pulseaudio] sink.c: device.vendor.name = "NVIDIA Corporation"
    I: [pulseaudio] sink.c: device.product.id = "0e0a"
    I: [pulseaudio] sink.c: device.product.name = "GK104 HDMI Audio Controller"
    I: [pulseaudio] sink.c: device.string = "hdmi:0"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: device.description = "GK104 HDMI Audio Controller Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: alsa.mixer_name = "Nvidia GPU 40 HDMI/DP"
    I: [pulseaudio] sink.c: alsa.components = "HDA:10de0040,14622843,00100100"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of GK104 HDMI Audio Controller Digital Stereo (HDMI)"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "0"
    I: [pulseaudio] source.c: alsa.card_name = "HDA NVidia"
    I: [pulseaudio] source.c: alsa.long_card_name = "HDA NVidia at 0xfeaf8000 irq 19"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "10de"
    I: [pulseaudio] source.c: device.vendor.name = "NVIDIA Corporation"
    I: [pulseaudio] source.c: device.product.id = "0e0a"
    I: [pulseaudio] source.c: device.product.name = "GK104 HDMI Audio Controller"
    I: [pulseaudio] source.c: device.string = "0"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0 (alsa_card.pci-0000_01_00.1) module loaded.
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/Xonar DG/Xonar DG.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card Xonar DG
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import Xonar DG use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card Xonar DG
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround40:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround40:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround41:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround41:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround50:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround50:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL surround51:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer surround51:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:1: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.CMI8786.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: No such file or directory
    I: [pulseaudio] module-card-restore.c: Restored profile 'output:analog-stereo+input:analog-stereo' for card alsa_card.pci-0000_03_07.0.
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_03_07.0.
    I: [pulseaudio] card.c: Created 1 "alsa_card.pci-0000_03_07.0"
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device front:1.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] sink.c: Created sink 1 "alsa_output.pci-0000_03_07.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "Multichannel"
    I: [pulseaudio] sink.c: alsa.id = "Multichannel"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "0"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "Xonar DG"
    I: [pulseaudio] sink.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_oxygen"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:03:07.0"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "13f6"
    I: [pulseaudio] sink.c: device.vendor.name = "C-Media Electronics Inc"
    I: [pulseaudio] sink.c: device.product.id = "8788"
    I: [pulseaudio] sink.c: device.product.name = "CMI8786 (Xonar DG)"
    I: [pulseaudio] sink.c: device.string = "front:1"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352800"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "352800"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
    I: [pulseaudio] sink.c: device.description = "CMI8786 (Xonar DG) Analog Stereo"
    I: [pulseaudio] sink.c: alsa.mixer_name = "CMI8786"
    I: [pulseaudio] sink.c: alsa.components = "CS4245 CMI8786"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] source.c: Created source 1 "alsa_output.pci-0000_03_07.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of CMI8786 (Xonar DG) Analog Stereo"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "1"
    I: [pulseaudio] source.c: alsa.card_name = "Xonar DG"
    I: [pulseaudio] source.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_oxygen"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:03:07.0"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "13f6"
    I: [pulseaudio] source.c: device.vendor.name = "C-Media Electronics Inc"
    I: [pulseaudio] source.c: device.product.id = "8788"
    I: [pulseaudio] source.c: device.product.name = "CMI8786 (Xonar DG)"
    I: [pulseaudio] source.c: device.string = "1"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 1.0 fragments of size 352800 bytes (2000.00ms), buffer size is 352800 bytes (2000.00ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
    I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -125.50 dB to 0.00 dB.
    I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
    I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
    I: [pulseaudio] alsa-sink.c: Using hardware mute control.
    I: [alsa-sink-Multichannel] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-Multichannel] alsa-sink.c: Starting playback.
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-source.c: Successfully opened device front:1.
    I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
    I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] source.c: Created source 2 "alsa_input.pci-0000_03_07.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: alsa.resolution_bits = "16"
    I: [pulseaudio] source.c: device.api = "alsa"
    I: [pulseaudio] source.c: device.class = "sound"
    I: [pulseaudio] source.c: alsa.class = "generic"
    I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] source.c: alsa.name = "Multichannel"
    I: [pulseaudio] source.c: alsa.id = "Multichannel"
    I: [pulseaudio] source.c: alsa.subdevice = "0"
    I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] source.c: alsa.device = "0"
    I: [pulseaudio] source.c: alsa.card = "1"
    I: [pulseaudio] source.c: alsa.card_name = "Xonar DG"
    I: [pulseaudio] source.c: alsa.long_card_name = "C-Media Oxygen HD Audio at 0xe800, irq 22"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_oxygen"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:03:07.0"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "13f6"
    I: [pulseaudio] source.c: device.vendor.name = "C-Media Electronics Inc"
    I: [pulseaudio] source.c: device.product.id = "8788"
    I: [pulseaudio] source.c: device.product.name = "CMI8786 (Xonar DG)"
    I: [pulseaudio] source.c: device.string = "front:1"
    I: [pulseaudio] source.c: device.buffering.buffer_size = "131072"
    I: [pulseaudio] source.c: device.buffering.fragment_size = "131072"
    I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
    I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
    I: [pulseaudio] source.c: device.description = "CMI8786 (Xonar DG) Analog Stereo"
    I: [pulseaudio] source.c: alsa.mixer_name = "CMI8786"
    I: [pulseaudio] source.c: alsa.components = "CS4245 CMI8786"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-source.c: Using 1.0 fragments of size 131072 bytes (743.04ms), buffer size is 131072 bytes (743.04ms)
    I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
    I: [pulseaudio] alsa-source.c: Hardware volume ranges from -12.00 dB to 12.00 dB.
    I: [pulseaudio] alsa-source.c: Fixing base volume to -12.00 dB
    I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
    I: [pulseaudio] alsa-source.c: Using hardware mute control.
    I: [alsa-source-Multichannel] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-source-Multichannel] alsa-source.c: Starting capture.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="1" name="pci-0000_03_07.0" card_name="alsa_card.pci-0000_03_07.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card1 (alsa_card.pci-0000_03_07.0) module loaded.
    I: [pulseaudio] module-udev-detect.c: Found 2 cards.
    I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
    I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #8; argument: "channels=2").
    I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #9; argument: "").
    I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #11; argument: "").
    I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #10; argument: "").
    I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #12; argument: "").
    I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #13; argument: "").
    I: [pulseaudio] module.c: Loaded "module-gconf" (index: #14; argument: "").
    I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_03_07.0.analog-stereo'.
    I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_03_07.0.analog-stereo'.
    I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #15; argument: "").
    I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #16; argument: "").
    I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #17; argument: "").
    I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #18; argument: "").
    I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #19; argument: "").
    I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #20; argument: "").
    I: [pulseaudio] client.c: Created 0 "Login Session c1"
    I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #21; argument: "").
    I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #22; argument: "").
    I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #23; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #24; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #25; argument: "").
    I: [pulseaudio] main.c: Daemon startup complete.
    I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
    E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
    I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    I: [pulseaudio] source-output.c: Trying to change sample rate
    I: [pulseaudio] remap.c: Using generic matrix remapping
    I: [pulseaudio] source-output.c: Created output 0 "Peak detect" on alsa_input.pci-0000_03_07.0.analog-stereo with sample spec float32le 1ch 25Hz and channel map mono
    I: [pulseaudio] source-output.c: application.id = "org.gnome.VolumeControl"
    I: [pulseaudio] source-output.c: media.name = "Peak detect"
    I: [pulseaudio] source-output.c: application.name = "GNOME Volume Control Dialog"
    I: [pulseaudio] source-output.c: native-protocol.peer = "UNIX socket client"
    I: [pulseaudio] source-output.c: native-protocol.version = "29"
    I: [pulseaudio] source-output.c: application.icon_name = "multimedia-volume-control"
    I: [pulseaudio] source-output.c: application.version = "3.12.1"
    I: [pulseaudio] source-output.c: application.process.id = "2090"
    I: [pulseaudio] source-output.c: application.process.user = "username"
    I: [pulseaudio] source-output.c: application.process.host = "gimli"
    I: [pulseaudio] source-output.c: application.process.binary = "gnome-control-center"
    I: [pulseaudio] source-output.c: application.language = "en_US.UTF-8"
    I: [pulseaudio] source-output.c: window.x11.display = ":0.0"
    I: [pulseaudio] source-output.c: application.process.machine_id = "16327981f21a4906af3310ebf24dab15"
    I: [pulseaudio] source-output.c: application.process.session_id = "c1"
    I: [pulseaudio] source-output.c: module-stream-restore.id = "source-output-by-application-id:org.gnome.VolumeControl"
    I: [pulseaudio] protocol-native.c: Final latency 60.00 ms = 40.00 ms + 20.00 ms
    I: [alsa-source-Multichannel] alsa-source.c: Increasing minimal latency to 1.00 ms
    I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_03_07.0.analog-stereo idle for too long, suspending ...
    I: [alsa-sink-Multichannel] alsa-sink.c: Device suspended...
    I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_01_00.1.hdmi-stereo idle for too long, suspending ...
    I: [alsa-sink-HDMI 0] alsa-sink.c: Device suspended...
    I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
    I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    I: [pulseaudio] sink-input.c: Trying to change sample rate
    I: [pulseaudio] alsa-sink.c: Updating rate for device front:1, new rate is 48000
    I: [pulseaudio] source.c: Changed sampling rate successfully
    I: [pulseaudio] sink.c: Changed sampling rate successfully
    I: [pulseaudio] sink-input.c: Rate changed to 48000 Hz
    I: [pulseaudio] module-stream-restore.c: Restoring mute state for sink input sink-input-by-media-role:test.
    I: [alsa-sink-Multichannel] alsa-sink.c: Trying resume...
    I: [alsa-sink-Multichannel] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [alsa-sink-Multichannel] alsa-util.c: ALSA period wakeups disabled
    I: [alsa-sink-Multichannel] alsa-sink.c: Time scheduling watermark is 18.38ms
    I: [alsa-sink-Multichannel] alsa-sink.c: Resumed successfully...
    I: [alsa-sink-Multichannel] alsa-sink.c: Starting playback.
    I: [pulseaudio] resampler.c: Forcing resampler 'copy', because of fixed, identical sample rates.
    I: [pulseaudio] remap.c: Using generic matrix remapping
    I: [pulseaudio] sink-input.c: Created input 0 "Front Right" on alsa_output.pci-0000_03_07.0.analog-stereo with sample spec s16le 1ch 48000Hz and channel map front-right
    I: [pulseaudio] sink-input.c: event.id = "audio-channel-front-right"
    I: [pulseaudio] sink-input.c: media.name = "Front Right"
    I: [pulseaudio] sink-input.c: media.role = "test"
    I: [pulseaudio] sink-input.c: media.filename = "/usr/share/sounds/freedesktop/stereo/audio-channel-front-right.oga"
    I: [pulseaudio] sink-input.c: application.name = "libcanberra"
    I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
    I: [pulseaudio] sink-input.c: native-protocol.version = "29"
    I: [pulseaudio] sink-input.c: application.id = "org.gnome.VolumeControl"
    I: [pulseaudio] sink-input.c: application.version = "0.30"
    I: [pulseaudio] sink-input.c: application.process.id = "2090"
    I: [pulseaudio] sink-input.c: application.process.user = "username"
    I: [pulseaudio] sink-input.c: application.process.host = "gimli"
    I: [pulseaudio] sink-input.c: application.process.binary = "gnome-control-center"
    I: [pulseaudio] sink-input.c: application.icon_name = "multimedia-volume-control"
    I: [pulseaudio] sink-input.c: application.language = "en_US.UTF-8"
    I: [pulseaudio] sink-input.c: window.x11.display = ":0.0"
    I: [pulseaudio] sink-input.c: application.process.machine_id = "16327981f21a4906af3310ebf24dab15"
    I: [pulseaudio] sink-input.c: application.process.session_id = "c1"
    I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:test"
    I: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
    I: [pulseaudio] protocol-native.c: Final latency 3837.50 ms = 1960.00 ms + 2*20.00 ms + 1837.50 ms
    I: [pulseaudio] sink-input.c: Freeing input 0 "Front Right"
    I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_03_07.0.analog-stereo idle for too long, suspending ...
    I: [alsa-sink-Multichannel] alsa-sink.c: Device suspended...
    ^CI: [pulseaudio] main.c: Got signal SIGINT.
    I: [pulseaudio] main.c: Exiting.
    I: [pulseaudio] main.c: Daemon shutdown initiated.
    I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #25).
    I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #25).
    I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #24).
    I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #24).
    I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #23).
    I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #23).
    I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #22).
    I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #22).
    I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #21).
    I: [pulseaudio] client.c: Freed 0 "Login Session c1"
    I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #21).
    I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #20).
    I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #20).
    I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #19).
    I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #19).
    I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #18).
    I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #18).
    I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #17).
    I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #17).
    I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #16).
    I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #16).
    I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #15).
    I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #15).
    I: [pulseaudio] module.c: Unloading "module-gconf" (index: #14).
    I: [pulseaudio] module.c: Unloaded "module-gconf" (index: #14).
    I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #13).
    I: [pulseaudio] source-output.c: Freeing output 0 "Peak detect"
    I: [pulseaudio] client.c: Freed 1 "GNOME Volume Control Dialog"
    I: [pulseaudio] client.c: Freed 2 "libcanberra"
    I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #13).
    I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #12).
    I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #12).
    I: [pulseaudio] module.c: Unloading "module-bluez5-discover" (index: #11).
    I: [pulseaudio] module.c: Unloaded "module-bluez5-discover" (index: #11).
    I: [pulseaudio] module.c: Unloading "module-bluetooth-discover" (index: #10).
    I: [pulseaudio] module.c: Unloaded "module-bluetooth-discover" (index: #10).
    I: [pulseaudio] module.c: Unloading "module-bluetooth-policy" (index: #9).
    I: [pulseaudio] module.c: Unloaded "module-bluetooth-policy" (index: #9).
    I: [pulseaudio] module.c: Unloading "module-jackdbus-detect" (index: #8).
    I: [pulseaudio] module.c: Unloaded "module-jackdbus-detect" (index: #8).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
    I: [pulseaudio] sink.c: Freeing sink 1 "alsa_output.pci-0000_03_07.0.analog-stereo"
    I: [pulseaudio] source.c: Freeing source 1 "alsa_output.pci-0000_03_07.0.analog-stereo.monitor"
    I: [pulseaudio] source.c: Freeing source 2 "alsa_input.pci-0000_03_07.0.analog-stereo"
    I: [pulseaudio] card.c: Freed 1 "alsa_card.pci-0000_03_07.0"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
    I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
    I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
    I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
    I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
    I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
    I: [pulseaudio] main.c: Daemon terminated.
    aplay -l:
    card 0: DG [Xonar DG], device 0: Multichannel [Multichannel]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: DG [Xonar DG], device 1: Digital [Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    aplay -L :
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=DG
    Xonar DG, Multichannel
    Default Audio Device
    front:CARD=DG,DEV=0
    Xonar DG, Multichannel
    Front speakers
    surround40:CARD=DG,DEV=0
    Xonar DG, Multichannel
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=DG,DEV=0
    Xonar DG, Multichannel
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=DG,DEV=0
    Xonar DG, Multichannel
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=DG,DEV=0
    Xonar DG, Multichannel
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=DG,DEV=0
    Xonar DG, Multichannel
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=DG,DEV=0
    Xonar DG, Multichannel
    IEC958 (S/PDIF) Digital Audio Output
    hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
    hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 1
    HDMI Audio Output
    hdmi:CARD=NVidia,DEV=2
    HDA NVidia, HDMI 2
    HDMI Audio Output
    hdmi:CARD=NVidia,DEV=3
    HDA NVidia, HDMI 3
    HDMI Audio Output
    My best guess at this point is that something(tm) is wrong with alsa. I have no idea how to troubleshoot this though. Any advice?
    Please let me know if anything important is missing.
    Last edited by InfamousBlue (2014-05-02 09:38:49)

    Did you ever have a copy of front channels or a mix of all of them played on the headphone jack with alsa only? I doubt it. If you kill pulseaudio and run following, what channels do you hear from headphones?
    speaker-test -c 8 -t wav -D plughw:DG,0
    This is probably more of a pulseaudio issue, since alsa usually does not copy streams.
    InfamousBlue wrote:I did not however update pulseaudio or anything else alsa related (as far as I can tell).
    Partial upgrades are not supported. There are some remapping examples on the wiki. If you seek a hardware remapping solution try hdajackretask from alsa-tools, it works however for hda compliant cards.
    Last edited by emeres (2014-05-02 07:30:17)

  • How can I start Jack with systemd?

    Hello everyone,
    I switched to systemd and removed initscripts and sysvinit a while ago. I am using my computers for audio production, and I need both jack and pulseaudio.
    I followed the directions in the wiki for JACK: A GUI-Based Setup and Pulseaudio will run through Jack -- as long as Jack starts first. Qjackctl is autostarted with KDE, but Pulseaudio starts up first. Therefore, once Jack starts, it disconnects Pulseaudio so only Jack programs output audio. The wiki recommends adding "sudo -u uname jack_start" to /etc/rc.local. However, I have already switched away from initscripts.
    I tried to write a service file to start Jack:
    [Unit]
    Description=JACK
    [Service]
    ExecStart=/usr/bin/jack_control start
    [Install]
    WantedBy=multi-user.target
    But that clearly didn't work:
    Nov 23 12:01:58 silverstone jack_control[280]: Traceback (most recent call last):
    Nov 23 12:01:58 silverstone jack_control[280]: File "/usr/bin/jack_control", line 336, in <module>
    Nov 23 12:01:58 silverstone jack_control[280]: main()
    Nov 23 12:01:58 silverstone jack_control[280]: File "/usr/bin/jack_control", line 132, in main
    Nov 23 12:01:58 silverstone jack_control[280]: bus = dbus.SessionBus()
    Nov 23 12:01:58 silverstone jack_control[280]: File "/usr/lib/python2.7/site-packages/dbus/_dbus.py", line 211, in __new__
    Nov 23 12:01:58 silverstone jack_control[280]: mainloop=mainloop)
    Nov 23 12:01:58 silverstone jack_control[280]: File "/usr/lib/python2.7/site-packages/dbus/_dbus.py", line 100, in __new__
    Nov 23 12:01:58 silverstone jack_control[280]: bus = BusConnection.__new__(subclass, bus_type, mainloop=mainloop)
    Nov 23 12:01:58 silverstone jack_control[280]: File "/usr/lib/python2.7/site-packages/dbus/bus.py", line 122, in __new__
    Nov 23 12:01:58 silverstone jack_control[280]: bus = cls._new_for_bus(address_or_type, mainloop=mainloop)
    Nov 23 12:01:58 silverstone jack_control[280]: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
    Nov 23 12:01:58 silverstone systemd[1]: jack.service: main process exited, code=exited, status=1/FAILURE
    Nov 23 12:01:58 silverstone systemd[1]: Unit jack.service entered failed state
    Nov 23 12:02:00 silverstone pulseaudio[337]: [pulseaudio] module-jack-sink.c: JACK error >Cannot connect to server socket err = No such file or directory<
    Nov 23 12:02:00 silverstone pulseaudio[337]: [pulseaudio] module-jack-sink.c: JACK error >Cannot connect to server socket<
    Nov 23 12:02:01 silverstone pulseaudio[337]: [pulseaudio] module-jack-sink.c: JACK error >Cannot use real-time scheduling (RR/5)(1: Operation not permitted)<
    Nov 23 12:02:01 silverstone pulseaudio[337]: [pulseaudio] module-jack-sink.c: JACK error >JackClient::AcquireSelfRealTime error<
    Nov 23 12:02:01 silverstone pulseaudio[337]: [pulseaudio] module-jack-source.c: JACK error >Cannot use real-time scheduling (RR/5)(1: Operation not permitted)<
    Nov 23 12:02:01 silverstone pulseaudio[337]: [pulseaudio] module-jack-source.c: JACK error >JackClient::AcquireSelfRealTime error<
    Nov 23 12:02:01 silverstone pulseaudio[337]: [pulseaudio] main.c: Source jack_in does not exist.
    Can anyone help me write a service file to start Jack?
    Thanks,
    Nicholas

    Thanks for the hint tomk! From what I can understand systemd was starting Jack as root, but since Jack is pretty much a single-user program, it needs to be started by the user intending to use it. So it was throwing errors because I have no display set for root (I don't even know how to do that).
    This explains why the wiki used sudo to start Jack. So I changed the service file to:
    [Unit]
    Description=JACK
    [Service]
    ExecStart=/usr/bin/sudo -u lion /usr/bin/jack_control start
    [Install]
    WantedBy=multi-user.target
    lion is my username. There is no jack_start, I have to use jack_control start.
    And it gives me:
    Nov 23 22:21:35 silverstone sudo[289]: root : TTY=unknown ; PWD=/ ; USER=lion ; COMMAND=/usr/bin/jack_control start
    Nov 23 22:21:36 silverstone sudo[289]: File "/usr/bin/jack_control", line 336, in <module>
    Nov 23 22:21:36 silverstone sudo[289]: File "/usr/bin/jack_control", line 132, in main
    Nov 23 22:21:36 silverstone systemd[1]: jack.service: main process exited, code=exited, status=1/FAILURE
    Nov 23 22:21:36 silverstone systemd[1]: Unit jack.service entered failed state
    Nov 23 22:21:38 silverstone pulseaudio[353]: [pulseaudio] module-jack-sink.c: JACK error >Cannot connect to server socket err = No such file or directory<
    Nov 23 22:21:38 silverstone pulseaudio[353]: [pulseaudio] module-jack-sink.c: JACK error >Cannot connect to server socket<
    Nov 23 22:21:39 silverstone pulseaudio[353]: [pulseaudio] module-jack-sink.c: JACK error >Cannot use real-time scheduling (RR/5)(1: Operation not permitted)<
    Nov 23 22:21:39 silverstone pulseaudio[353]: [pulseaudio] module-jack-sink.c: JACK error >JackClient::AcquireSelfRealTime error<
    Nov 23 22:21:39 silverstone pulseaudio[353]: [pulseaudio] module-jack-source.c: JACK error >Cannot use real-time scheduling (RR/5)(1: Operation not permitted)<
    Nov 23 22:21:39 silverstone pulseaudio[353]: [pulseaudio] module-jack-source.c: JACK error >JackClient::AcquireSelfRealTime error<
    Nov 23 22:21:39 silverstone pulseaudio[353]: [pulseaudio] main.c: Source jack_in does not exist.
    However, the audio setup seems to be working fine. The only other idea I have is that Jack is becoming a dbus socket and makes systemd think it failed. But Pulseaudio is also claiming that it can't connect to jack., so I don't know whether it's working or not.
    I saw a way to set up a .service file for dbus sockets but it required the dbus name of the program, which I don't know how to find.

  • Pulseaudio not starting via xinit

    Hi,
    I know there are a lot of existing topics about pulseaudio, but I couldn't find a solution for my problem:
    I've done a basic installation (Beginners Guide) on my Acer Revo 3700. No desktop environment has been installed, since I only want to use XBMC and this can be started automatically with systemd (works like a charme ). For the video driver I'm using nouveau and for sound I first used pure ALSA, which worked great! But I want pulseaudio for handling the sound, because when starting e.g. snes with advanced launcher, XBMC blocks the sound card (as far as I understand it...)
    On the wiki for pulseaudio, it says, that it starts automatically when xinit is started, so after booting I check the status of xbmc and this is what I get:
    [root@xbmc ~]# systemctl status xbmc
    xbmc.service - Starts instance of XBMC using xinit
    Loaded: loaded (/usr/lib/systemd/system/xbmc.service; enabled)
    Active: active (running) since Di 2013-04-02 17:33:14 CEST; 2min 18s ago
    Main PID: 662 (xinit)
    CGroup: name=systemd:/system/xbmc.service
    ââ662 /usr/bin/xinit /usr/bin/xbmc-standalone -- :0 -nolisten tcp
    ââ663 X :0 -nolisten tcp
    ââ666 /bin/sh /usr/bin/xbmc-standalone
    ââ676 dbus-launch --autolaunch 3cbba0f6c27746bb9113e71d08d7eaa5 --binary-syntax --close-stderr
    ââ677 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
    ââ685 /bin/sh /usr/bin/xbmc --standalone
    ââ694 /usr/lib/xbmc/xbmc.bin --standalone
    Apr 02 17:33:14 xbmc xinit[662]: Initializing built-in extension XFree86-VidModeExtension
    Apr 02 17:33:14 xbmc xinit[662]: Initializing built-in extension XFree86-DGA
    Apr 02 17:33:14 xbmc xinit[662]: Initializing built-in extension XFree86-DRI
    Apr 02 17:33:14 xbmc xinit[662]: Initializing built-in extension DRI2
    Apr 02 17:33:14 xbmc xinit[662]: Loading extension GLX
    Apr 02 17:33:14 xbmc xinit[662]: resize called 1920 1080
    Apr 02 17:33:16 xbmc pulseaudio[672]: [pulseaudio] module-gconf.c: Unable to read or parse data from client.
    Apr 02 17:33:16 xbmc pulseaudio[672]: [pulseaudio] module.c: Failed to load module "module-gconf" (argument: ""): initialization failed.
    Apr 02 17:33:16 xbmc pulseaudio[672]: [pulseaudio] main.c: Module load failed.
    Apr 02 17:34:51 xbmc xinit[662]: no talloc stackframe around, leaking memory
    So I disabled this gconf-section in /etc/pulse/default.pa, and restarted xbmc. Now there are no error-lines from pulseaudio, but it is still not running (ps -ef | grep pulse)
    On the other hand, if run pulseaudio (/usr/bin/start-pulseaudio-x11) directly, it starts. Furthermore (!) after killing the manually started process, I restart xbmc and pulseaudio gets started too!
    So why doesn't it start directly after booting? (Unfortunately I don't know in what log-files I have to search )
    Anyway: I still do not have sound (although in XBMC the audio output device is shown as Defaults (PulseAudio)... I think that's because the wrong device is set as default. I know that the right device is 1:7, but adding the line
    load-module module-alsa-source device=hw:1,7
    to /etc/pulse/default.pa, only brings up this error:
    pulseaudio[629]: [pulseaudio] module.c: Failed to load module "module-alsa-source" (argument: "device=hw:1,7"): initialization failed.
    output of aplay:
    [xbmc@xbmc ~]$ LANGUAGE=en_US aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: ALC662 rev1 Digital [ALC662 rev1 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    I would really appreciate any hint, because I'm already quite frustrated...
    If any information is missing, please ask!
    Thx in advance!
    Last edited by zorr (2013-04-02 17:35:52)

    After being not very productive the last days, I faced the problem again, but I wasn't very successful. At least I was able to gather some additional information:
    If I understood correctly, the command load-module module-alsa-source in /etc/pulse/default.pa is loading a module for sound input (~ recording) and not output. So I changed the line to load-module module-alsa-sink device=hw:1,7  sink_name=hdmi17. (the output is via HDMI) Now when I restart xbmc and move the cursor through the menu (where a sound should be played), I did this:
    [root@xbmc ~]# fuser -v /dev/snd/*
    USER PID ACCESS COMMAND
    /dev/snd/controlC0: xbmc 572 F.... pulseaudio
    /dev/snd/controlC1: xbmc 572 F.... pulseaudio
    /dev/snd/pcmC0D0p: xbmc 572 F...m pulseaudio
    /dev/snd/pcmC1D7p: xbmc 572 F...m pulseaudio
    After a while the output changes to:
    [root@xbmc ~]# fuser -v /dev/snd/*
    USER PID ACCESS COMMAND
    /dev/snd/controlC0: xbmc 572 F.... pulseaudio
    /dev/snd/controlC1: xbmc 572 F.... pulseaudio
    /dev/snd/pcmC0D0p: xbmc 572 F...m pulseaudio
    -> the correct device disappears and it seems that it tries to use pcmC0D0p for output.
    So the correct device is only "used" for half a minute or so after starting xbmc.
    this is the complete output of pulseaudio:
    I [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    D [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    I [pulseaudio] core-util.c: Failed to acquire high-priority scheduling: Permission denied
    I [pulseaudio] main.c: This is PulseAudio 3.0
    D [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
    D [pulseaudio] main.c: Running on host: Linux x86_64 3.8.5-1-ARCH #1 SMP PREEMPT Fri Mar 29 19:18:14 CET 2013
    D [pulseaudio] main.c: Found 4 CPUs.
    I [pulseaudio] main.c: Page size is 4096 bytes
    D [pulseaudio] main.c: Compiled with Valgrind support: no
    D [pulseaudio] main.c: Running in valgrind mode: no
    D [pulseaudio] main.c: Running in VM: no
    D [pulseaudio] main.c: Optimized build: yes
    D [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I [pulseaudio] main.c: Machine ID is 3cbba0f6c27746bb9113e71d08d7eaa5.
    I [pulseaudio] main.c: Using runtime directory /var/lib/xbmc/.config/pulse/3cbba0f6c27746bb9113e71d08d7eaa5-runtime.
    I [pulseaudio] main.c: Using state directory /var/lib/xbmc/.config/pulse.
    I [pulseaudio] main.c: Using modules directory /usr/lib/pulse-3.0/modules.
    I [pulseaudio] main.c: Running in system mode: no
    W [pulseaudio] pid.c: Stale PID file, overwriting.
    I [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    D [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64,0 KiB each, total size is 64,0 MiB, maximum usable slot size is 65472
    I [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3
    I [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    D [pulseaudio] database-tdb.c: Opened TDB database '/var/lib/xbmc/.config/pulse/3cbba0f6c27746bb9113e71d08d7eaa5-device-volumes.tdb'
    I [pulseaudio] module-device-restore.c: Successfully opened database file '/var/lib/xbmc/.config/pulse/3cbba0f6c27746bb9113e71d08d7eaa5-device-volumes'.
    I [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    D [pulseaudio] database-tdb.c: Opened TDB database '/var/lib/xbmc/.config/pulse/3cbba0f6c27746bb9113e71d08d7eaa5-stream-volumes.tdb'
    I [pulseaudio] module-stream-restore.c: Successfully opened database file '/var/lib/xbmc/.config/pulse/3cbba0f6c27746bb9113e71d08d7eaa5-stream-volumes'.
    D [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    D [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    D [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    I [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    D [pulseaudio] database-tdb.c: Opened TDB database '/var/lib/xbmc/.config/pulse/3cbba0f6c27746bb9113e71d08d7eaa5-card-database.tdb'
    I [pulseaudio] module-card-restore.c: Successfully opened database file '/var/lib/xbmc/.config/pulse/3cbba0f6c27746bb9113e71d08d7eaa5-card-database'.
    I [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    D [pulseaudio] alsa-util.c: Trying hw:1,7 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open hw:1,7
    I [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    D [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
    I [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I [pulseaudio] alsa-sink.c: Successfully opened device hw:1,7.
    I [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I [pulseaudio] sink.c: Created sink 0 "hdmi17" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I [pulseaudio] sink.c: device.api = "alsa"
    I [pulseaudio] sink.c: device.class = "sound"
    I [pulseaudio] sink.c: alsa.class = "generic"
    I [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I [pulseaudio] sink.c: alsa.subdevice = "0"
    I [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I [pulseaudio] sink.c: alsa.device = "7"
    I [pulseaudio] sink.c: alsa.card = "1"
    I [pulseaudio] sink.c: alsa.card_name = "HDA NVidia"
    I [pulseaudio] sink.c: alsa.long_card_name = "HDA NVidia at 0xfcf7c000 irq 17"
    I [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
    I [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card1"
    I [pulseaudio] sink.c: device.bus = "pci"
    I [pulseaudio] sink.c: device.vendor.id = "10de"
    I [pulseaudio] sink.c: device.vendor.name = "NVIDIA Corporation"
    I [pulseaudio] sink.c: device.product.id = "0be3"
    I [pulseaudio] sink.c: device.product.name = "High Definition Audio Controller"
    I [pulseaudio] sink.c: device.string = "hw:1,7"
    I [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I [pulseaudio] sink.c: device.description = "High Definition Audio Controller"
    I [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    D [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    I [pulseaudio] source.c: Created source 0 "hdmi17.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I [pulseaudio] source.c: device.description = "Monitor of High Definition Audio Controller"
    I [pulseaudio] source.c: device.class = "monitor"
    I [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    I [pulseaudio] alsa-sink.c: Using 2,0 fragments of size 176384 bytes (999,91ms), buffer size is 352768 bytes (1999,82ms)
    I [pulseaudio] alsa-sink.c: Time scheduling watermark is 20,00ms
    D [pulseaudio] alsa-sink.c: hwbuf_unused=0
    D [pulseaudio] alsa-sink.c: setting avail_min=87310
    D [pulseaudio] alsa-util.c: snd_pcm_dump():
    D [pulseaudio] alsa-util.c: Hardware PCM card 1 'HDA NVidia' device 7 subdevice 0
    D [pulseaudio] alsa-util.c: Its setup is:
    D [pulseaudio] alsa-util.c: stream : PLAYBACK
    D [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
    D [pulseaudio] alsa-util.c: format : S16_LE
    D [pulseaudio] alsa-util.c: subformat : STD
    D [pulseaudio] alsa-util.c: channels : 2
    D [pulseaudio] alsa-util.c: rate : 44100
    D [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
    D [pulseaudio] alsa-util.c: msbits : 16
    D [pulseaudio] alsa-util.c: buffer_size : 88192
    D [pulseaudio] alsa-util.c: period_size : 44096
    D [pulseaudio] alsa-util.c: period_time : 999909
    D [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
    D [pulseaudio] alsa-util.c: period_step : 1
    D [pulseaudio] alsa-util.c: avail_min : 87310
    D [pulseaudio] alsa-util.c: period_event : 0
    D [pulseaudio] alsa-util.c: start_threshold : -1
    D [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
    D [pulseaudio] alsa-util.c: silence_threshold: 0
    D [pulseaudio] alsa-util.c: silence_size : 0
    D [pulseaudio] alsa-util.c: boundary : 6205960286516543488
    D [pulseaudio] alsa-util.c: appl_ptr : 0
    D [pulseaudio] alsa-util.c: hw_ptr : 0
    D [alsa-sink] alsa-sink.c: Thread starting up
    I [alsa-sink] core-util.c: Failed to acquire real-time scheduling: Permission denied
    I [alsa-sink] alsa-sink.c: Starting playback.
    D [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D [pulseaudio] module-device-restore.c: Could not set format on sink hdmi17
    I [pulseaudio] module.c: Loaded "module-alsa-sink" (index: #4; argument: "device=hw:1,7 sink_name=hdmi17").
    D [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-3.0/modules/module-udev-detect.so': success
    D [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: no
    D [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1"'
    D [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus 9c22446eaf123566ea07285f5161d331 as :1.0
    D [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
    I [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA Intel/HDA Intel.conf
    I [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA Intel
    I [pulseaudio] (alsa-lib)main.c: error: failed to import HDA Intel use case configuration -2
    I [pulseaudio] alsa-ucm.c: UCM not available for card HDA Intel
    D [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
    D [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open hw:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open hw:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
    D [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
    D [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open front:0
    D [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D [pulseaudio] alsa-mixer.c: Profile input:analog-stereo supported.
    I [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input-microphone-front'
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-microphone-front', none of required-any elements preset.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input-microphone-rear'
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-microphone-rear', none of required-any elements preset.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input-microphone-internal'
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (found!)
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Internal Mic Phantom Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-microphone-internal', none of required-any elements preset.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input-microphone-dock'
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-microphone-dock', none of required-any elements preset.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Input Source Select' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Digital Input Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Analog Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Shared Mic/Line in' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Auto Gain Control' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input-microphone'
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (found!)
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-linein', none of required-any elements preset.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input-radio'
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-input-microphone'
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Auto-Mute Mode' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-microphone', none of required-any elements preset.
    D [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
    D [pulseaudio] alsa-mixer.c: Path Set 0x1fabdf0, direction=2
    D [pulseaudio] alsa-mixer.c: Path analog-input (Analog Input), direction=2, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-13,5, max_dB=33
    D [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=2, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D [pulseaudio] alsa-mixer.c: Path analog-input-microphone (Microphone), direction=2, priority=87, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=3, min_dB=-13,5, max_dB=63
    D [pulseaudio] alsa-mixer.c: Element Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D [pulseaudio] alsa-mixer.c: Jack Mic, alsa_name='Mic Jack', detection possible
    D [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
    D [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
    D [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
    D [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
    D [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open hw:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open hw:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
    D [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
    D [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
    D [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open front:0
    D [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D [pulseaudio] alsa-mixer.c: Profile output:analog-stereo supported.
    I [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-output'
    D [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-output-speaker'
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (found!)
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Phantom Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Surround Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Center Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'LFE Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Skipping path 'analog-output-speaker', none of required-any elements preset.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-output-speaker'
    D [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' failed.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones'
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (found!)
    D [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones'
    D [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' failed.
    D [pulseaudio] alsa-mixer.c: Probing path 'analog-output-mono'
    D [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=2, switch=2, enumeration=0).
    D [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' failed.
    D [pulseaudio] alsa-mixer.c: Removing path 'analog-output' as it is a subset of 'analog-output-headphones'.
    D [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
    D [pulseaudio] alsa-mixer.c: Path Set 0x1fd13d0, direction=1
    D [pulseaudio] alsa-mixer.c: Path analog-output-headphones (Headphones), direction=1, priority=90, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=64, min_dB=-115, max_dB=0
    D [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D [pulseaudio] alsa-mixer.c: Jack Front Headphone, alsa_name='Front Headphone Jack', detection unavailable
    D [pulseaudio] alsa-mixer.c: Jack Headphone, alsa_name='Headphone Jack', detection possible
    D [pulseaudio] alsa-mixer.c: Jack Headphone Mic, alsa_name='Headphone Mic Jack', detection unavailable
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-mono - will not be able to open input:analog-mono
    D [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-stereo
    D [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open front:0
    D [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D [pulseaudio] alsa-mixer.c: Profile output:analog-stereo+input:analog-stereo supported.
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo
    D [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40
    D [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
    D [pulseaudio] alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open surround40:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying surround40:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open surround40:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:surround40:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:surround40:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:surround40:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    I [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
    D [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-40
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-mono - will not be able to open output:analog-surround-40
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-stereo - will not be able to open output:analog-surround-40
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:iec958-stereo - will not be able to open output:analog-surround-40
    D [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41
    D [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
    D [pulseaudio] alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open surround41:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying surround41:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open surround41:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:surround41:0
    I [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:surround41:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:surround41:0
    I [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
    I [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
    D [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-41
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-mono - will not be able to open output:analog-surround-41
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-stereo - will not be able to open output:analog-surround-41
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:iec958-stereo - will not be able to open output:analog-surround-41
    D [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50
    D [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
    D [pulseaudio] alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open surround50:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying surround50:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open surround50:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:surround50:0
    I [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:surround50:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:surround50:0
    I [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_any() failed: Invalid argument
    I [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
    D [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-50
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-mono - will not be able to open output:analog-surround-50
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-stereo - will not be able to open output:analog-surround-50
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:iec958-stereo - will not be able to open output:analog-surround-50
    D [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51
    D [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
    D [pulseaudio] alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open surround51:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying surround51:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open surround51:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:surround51:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:surround51:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:surround51:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(6) failed: Invalid argument
    I [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
    D [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-51
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-mono - will not be able to open output:analog-surround-51
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-stereo - will not be able to open output:analog-surround-51
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:iec958-stereo - will not be able to open output:analog-surround-51
    D [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71
    D [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
    D [pulseaudio] alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open surround71:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying surround71:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open surround71:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:surround71:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
    D [pulseaudio] alsa-util.c: Trying plug:surround71:0 without SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open plug:surround71:0
    D [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(8) failed: Invalid argument
    I [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Invalid argument
    D [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-71
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-mono - will not be able to open output:analog-surround-71
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-stereo - will not be able to open output:analog-surround-71
    D [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:iec958-stereo - will not be able to open output:analog-surround-71
    D [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo
    D [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
    D [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    D [pulseaudio] alsa-util.c: Managed to open iec958:0
    D [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D [pulseaudio] alsa-mixer.c: Profile output:iec958-stereo supported.
    I [pulseaudio] (alsa-lib)control.c: Invalid CTL iec958:0
    I [pulseaudio] alsa-util.c: Unable to attach to mixer iec958:0: No such file or directory
    I [pulseau

  • PulseAudio – high CPU usage

    I tried to set up pulseaudio on my computer, but it has very bad performance. When I play a music in Totem, pulseaudio uses about 18% of my CPU, and sometimes it uses 70-80%, and slow down my system. I tried this setting also, but the result even worse: pulseaudio uses always over 50% of my CPU. My CPU: Intel Celeron 2.10GHz. Is this normal?

    Hello again, thanks for your time. Here are those outputs:
    [user@ThinkPad ~]$ cat /etc/pulse/default.pa
    #!/usr/bin/pulseaudio -nF
    # This file is part of PulseAudio.
    # PulseAudio is free software; you can redistribute it and/or modify it
    # under the terms of the GNU Lesser General Public License as published by
    # the Free Software Foundation; either version 2 of the License, or
    # (at your option) any later version.
    # PulseAudio is distributed in the hope that it will be useful, but
    # WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
    # General Public License for more details.
    # You should have received a copy of the GNU Lesser General Public License
    # along with PulseAudio; if not, write to the Free Software Foundation,
    # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
    # This startup script is used only if PulseAudio is started per-user
    # (i.e. not in system mode)
    .nofail
    ### Load something into the sample cache
    #load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
    #load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
    #load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
    #load-sample-lazy pulse-access /usr/share/sounds/generic.wav
    .fail
    ### Automatically restore the volume of streams and devices
    load-module module-device-restore
    load-module module-stream-restore
    load-module module-card-restore
    ### Automatically augment property information from .desktop files
    ### stored in /usr/share/application
    load-module module-augment-properties
    ### Load audio drivers statically
    ### (it's probably better to not load these drivers manually, but instead
    ### use module-udev-detect -- see below -- for doing this automatically)
    #load-module module-alsa-sink
    #load-module module-alsa-source device=hw:1,0
    #load-module module-oss device="/dev/dsp" sink_name=output source_name=input
    #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
    #load-module module-null-sink
    #load-module module-pipe-sink
    ### Automatically load driver modules depending on the hardware available
    .ifexists module-udev-detect.so
    load-module module-udev-detect
    .else
    ### Use the static hardware detection module (for systems that lack udev/hal support)
    load-module module-detect
    .endif
    ### Automatically connect sink and source if JACK server is present
    .ifexists module-jackdbus-detect.so
    .nofail
    load-module module-jackdbus-detect
    .fail
    .endif
    ### Automatically load driver modules for Bluetooth hardware
    .ifexists module-bluetooth-discover.so
    load-module module-bluetooth-discover
    .endif
    ### Load several protocols
    .ifexists module-esound-protocol-unix.so
    load-module module-esound-protocol-unix
    .endif
    load-module module-native-protocol-unix
    ### Network access (may be configured with paprefs, so leave this commented
    ### here if you plan to use paprefs)
    #load-module module-esound-protocol-tcp
    #load-module module-native-protocol-tcp
    #load-module module-zeroconf-publish
    ### Load the RTP receiver module (also configured via paprefs, see above)
    #load-module module-rtp-recv
    ### Load the RTP sender module (also configured via paprefs, see above)
    #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
    #load-module module-rtp-send source=rtp.monitor
    ### Load additional modules from GConf settings. This can be configured with the paprefs tool.
    ### Please keep in mind that the modules configured by paprefs might conflict with manually
    ### loaded modules.
    .ifexists module-gconf.so
    .nofail
    load-module module-gconf
    .fail
    .endif
    ### Automatically restore the default sink/source when changed by the user
    ### during runtime
    ### NOTE: This should be loaded as early as possible so that subsequent modules
    ### that look up the default sink/source get the right value
    load-module module-default-device-restore
    ### Automatically move streams to the default sink if the sink they are
    ### connected to dies, similar for sources
    load-module module-rescue-streams
    ### Make sure we always have a sink around, even if it is a null sink.
    load-module module-always-sink
    ### Honour intended role device property
    load-module module-intended-roles
    ### Automatically suspend sinks/sources that become idle for too long
    load-module module-suspend-on-idle
    ### If autoexit on idle is enabled we want to make sure we only quit
    ### when no local session needs us anymore.
    .ifexists module-console-kit.so
    .nofail
    load-module module-console-kit
    .fail
    .endif
    .ifexists module-systemd-login.so
    load-module module-systemd-login
    .endif
    ### Enable positioned event sounds
    load-module module-position-event-sounds
    ### Cork music/video streams when a phone stream is active
    load-module module-role-cork
    ### Modules to allow autoloading of filters (such as echo cancellation)
    ### on demand. module-filter-heuristics tries to determine what filters
    ### make sense, and module-filter-apply does the heavy-lifting of
    ### loading modules and rerouting streams.
    load-module module-filter-heuristics
    load-module module-filter-apply
    ### Load DBus protocol
    .ifexists module-dbus-protocol.so
    load-module module-dbus-protocol
    .endif
    # X11 modules should not be started from default.pa so that one daemon
    # can be shared by multiple sessions.
    ### Load X11 bell module
    #load-module module-x11-bell sample=bell-windowing-system
    ### Register ourselves in the X11 session manager
    #load-module module-x11-xsmp
    ### Publish connection data in the X11 root window
    #.ifexists module-x11-publish.so
    #.nofail
    #load-module module-x11-publish
    #.fail
    #.endif
    load-module module-switch-on-port-available
    ### Make some devices default
    #set-default-sink output
    #set-default-source input
    [user@ThinkPad ~]$ cat /etc/pulse/client.conf
    # This file is part of PulseAudio.
    # PulseAudio is free software; you can redistribute it and/or modify
    # it under the terms of the GNU Lesser General Public License as published by
    # the Free Software Foundation; either version 2 of the License, or
    # (at your option) any later version.
    # PulseAudio is distributed in the hope that it will be useful, but
    # WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
    # General Public License for more details.
    # You should have received a copy of the GNU Lesser General Public License
    # along with PulseAudio; if not, write to the Free Software
    # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
    # USA.
    ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
    ## more information. Default values are commented out. Use either ; or # for
    ## commenting.
    autospawn = no
    daemon-binary = /bin/true
    ; default-sink =
    ; default-source =
    ; default-server =
    ; default-dbus-server =
    ; autospawn = yes
    ; daemon-binary = /usr/bin/pulseaudio
    ; extra-arguments = --log-target=syslog
    ; cookie-file =
    ; enable-shm = yes
    ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
    ; auto-connect-localhost = no
    ; auto-connect-display = no
    [user@ThinkPad ~]$ pulseaudio -vvvv
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "8086"
    I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
    I: [pulseaudio] source.c: device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
    I: [pulseaudio] source.c: device.form_factor = "internal"
    I: [pulseaudio] source.c: device.string = "0"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
    D: [pulseaudio] alsa-sink.c: setting avail_min=87319
    D: [pulseaudio] alsa-mixer.c: Activating path analog-output-headphones
    D: [pulseaudio] alsa-mixer.c: Path analog-output-headphones (Headphones), direction=1, priority=90, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=74, min_dB=-199, max_dB=0
    D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Speaker, direction=1, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element IEC958, direction=1, switch=2, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Headphone, alsa_name='Headphone Jack', detection possible
    I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
    I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -199.00 dB to 0.00 dB.
    I: [pulseaudio] alsa-sink.c: Fixing base volume to 0.00 dB
    I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
    I: [pulseaudio] alsa-sink.c: Using hardware mute control.
    D: [pulseaudio] alsa-util.c: snd_pcm_dump():
    D: [pulseaudio] alsa-util.c: Soft volume PCM
    D: [pulseaudio] alsa-util.c: Control: PCM Playback Volume
    D: [pulseaudio] alsa-util.c: min_dB: -51
    D: [pulseaudio] alsa-util.c: max_dB: 0
    D: [pulseaudio] alsa-util.c: resolution: 256
    D: [pulseaudio] alsa-util.c: Its setup is:
    D: [pulseaudio] alsa-util.c: stream : PLAYBACK
    D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
    D: [pulseaudio] alsa-util.c: format : S16_LE
    D: [pulseaudio] alsa-util.c: subformat : STD
    D: [pulseaudio] alsa-util.c: channels : 2
    D: [pulseaudio] alsa-util.c: rate : 44100
    D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
    D: [pulseaudio] alsa-util.c: msbits : 16
    D: [pulseaudio] alsa-util.c: buffer_size : 88200
    D: [pulseaudio] alsa-util.c: period_size : 44100
    D: [pulseaudio] alsa-util.c: period_time : 1000000
    D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
    D: [pulseaudio] alsa-util.c: period_step : 1
    D: [pulseaudio] alsa-util.c: avail_min : 87319
    D: [pulseaudio] alsa-util.c: period_event : 0
    D: [pulseaudio] alsa-util.c: start_threshold : -1
    D: [pulseaudio] alsa-util.c: stop_threshold : 6206523236469964800
    D: [pulseaudio] alsa-util.c: silence_threshold: 0
    D: [pulseaudio] alsa-util.c: silence_size : 0
    D: [pulseaudio] alsa-util.c: boundary : 6206523236469964800
    D: [pulseaudio] alsa-util.c: Slave: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
    D: [pulseaudio] alsa-util.c: Its setup is:
    D: [pulseaudio] alsa-util.c: stream : PLAYBACK
    D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
    D: [pulseaudio] alsa-util.c: format : S16_LE
    D: [pulseaudio] alsa-util.c: subformat : STD
    D: [pulseaudio] alsa-util.c: channels : 2
    D: [pulseaudio] alsa-util.c: rate : 44100
    D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
    D: [pulseaudio] alsa-util.c: msbits : 16
    D: [pulseaudio] alsa-util.c: buffer_size : 88200
    D: [pulseaudio] alsa-util.c: period_size : 44100
    D: [pulseaudio] alsa-util.c: period_time : 1000000
    D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
    D: [pulseaudio] alsa-util.c: period_step : 1
    D: [pulseaudio] alsa-util.c: avail_min : 87319
    D: [pulseaudio] alsa-util.c: period_event : 0
    D: [pulseaudio] alsa-util.c: start_threshold : -1
    D: [pulseaudio] alsa-util.c: stop_threshold : 6206523236469964800
    D: [pulseaudio] alsa-util.c: silence_threshold: 0
    D: [pulseaudio] alsa-util.c: silence_size : 0
    D: [pulseaudio] alsa-util.c: boundary : 6206523236469964800
    D: [pulseaudio] alsa-util.c: appl_ptr : 0
    D: [pulseaudio] alsa-util.c: hw_ptr : 0
    D: [alsa-sink] alsa-sink.c: Thread starting up
    D: [pulseaudio] alsa-sink.c: Requested volume: 0: 35% 1: 35%
    D: [alsa-sink] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
    D: [pulseaudio] alsa-sink.c: in dB: 0: -27.34 dB 1: -27.34 dB
    I: [alsa-sink] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    D: [pulseaudio] alsa-sink.c: Got hardware volume: 0: 35% 1: 35%
    D: [pulseaudio] alsa-sink.c: in dB: 0: -27.20 dB 1: -27.20 dB
    D: [pulseaudio] alsa-sink.c: Calculated software volume: 0: 99% 1: 99% (accurate-enough=yes)
    D: [pulseaudio] alsa-sink.c: in dB: 0: -0.14 dB 1: -0.14 dB
    I: [alsa-sink] alsa-sink.c: Starting playback.
    D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [pulseaudio] module-device-restore.c: Could not set format on sink alsa_output.pci-0000_00_1b.0.analog-stereo
    D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open front:0
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-source.c: Successfully opened device front:0.
    I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
    I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D: [pulseaudio] alsa-mixer.c: Added 3 ports
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    I: [pulseaudio] module-device-restore.c: Restoring port for source source:alsa_input.pci-0000_00_1b.0.analog-stereo.
    I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_input.pci-0000_00_1b.0.analog-stereo.
    I: [pulseaudio] module-device-restore.c: Restoring mute state for source alsa_input.pci-0000_00_1b.0.analog-stereo.
    I: [pulseaudio] source.c: Created source 1 "alsa_input.pci-0000_00_1b.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: alsa.resolution_bits = "16"
    I: [pulseaudio] source.c: device.api = "alsa"
    I: [pulseaudio] source.c: device.class = "sound"
    I: [pulseaudio] source.c: alsa.class = "generic"
    I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] source.c: alsa.name = "CONEXANT Analog"
    I: [pulseaudio] source.c: alsa.id = "CONEXANT Analog"
    I: [pulseaudio] source.c: alsa.subdevice = "0"
    I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] source.c: alsa.device = "0"
    I: [pulseaudio] source.c: alsa.card = "0"
    I: [pulseaudio] source.c: alsa.card_name = "HDA Intel"
    I: [pulseaudio] source.c: alsa.long_card_name = "HDA Intel at 0xf2520000 irq 43"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1b.0"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "8086"
    I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
    I: [pulseaudio] source.c: device.product.name = "5 Series/3400 Series Chipset High Definition Audio"
    I: [pulseaudio] source.c: device.form_factor = "internal"
    I: [pulseaudio] source.c: device.string = "front:0"
    I: [pulseaudio] source.c: device.buffering.buffer_size = "352800"
    I: [pulseaudio] source.c: device.buffering.fragment_size = "176400"
    I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
    I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
    I: [pulseaudio] source.c: device.description = "Built-in Audio Analog Stereo"
    I: [pulseaudio] source.c: alsa.mixer_name = "Intel IbexPeak HDMI"
    I: [pulseaudio] source.c: alsa.components = "HDA:14f15069,17aa2155,00100302 HDA:80862804,17aa21b5,00100000"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-source.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms)
    I: [pulseaudio] alsa-source.c: Time scheduling watermark is 20.00ms
    D: [pulseaudio] alsa-source.c: hwbuf_unused=0
    D: [pulseaudio] alsa-source.c: setting avail_min=87319
    D: [pulseaudio] alsa-mixer.c: Activating path analog-input-microphone-internal
    D: [pulseaudio] alsa-mixer.c: Path analog-input-microphone-internal (Internal Microphone), direction=2, priority=89, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=4, min_dB=-74, max_dB=54
    D: [pulseaudio] alsa-mixer.c: Element Internal Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Internal Mic, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Dock Mic, direction=2, switch=2, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Dock Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Mic, alsa_name='Mic Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Dock Mic, alsa_name='Dock Mic Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Jack Rear Mic, alsa_name='Rear Mic Jack', detection unavailable
    I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
    I: [pulseaudio] alsa-source.c: Hardware volume ranges from -74.00 dB to 54.00 dB.
    I: [pulseaudio] alsa-source.c: Fixing base volume to -54.00 dB
    I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
    I: [pulseaudio] alsa-source.c: Using hardware mute control.
    D: [pulseaudio] alsa-util.c: snd_pcm_dump():
    D: [pulseaudio] alsa-util.c: Hardware PCM card 0 'HDA Intel' device 0 subdevice 0
    D: [pulseaudio] alsa-util.c: Its setup is:
    D: [pulseaudio] alsa-util.c: stream : CAPTURE
    D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
    D: [pulseaudio] alsa-util.c: format : S16_LE
    D: [pulseaudio] alsa-util.c: subformat : STD
    D: [pulseaudio] alsa-util.c: channels : 2
    D: [pulseaudio] alsa-util.c: rate : 44100
    D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
    D: [pulseaudio] alsa-util.c: msbits : 16
    D: [pulseaudio] alsa-util.c: buffer_size : 88200
    D: [pulseaudio] alsa-util.c: period_size : 44100
    D: [pulseaudio] alsa-util.c: period_time : 1000000
    D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
    D: [pulseaudio] alsa-util.c: period_step : 1
    D: [pulseaudio] alsa-util.c: avail_min : 87319
    D: [pulseaudio] alsa-util.c: period_event : 0
    D: [pulseaudio] alsa-util.c: start_threshold : -1
    D: [pulseaudio] alsa-util.c: stop_threshold : 6206523236469964800
    D: [pulseaudio] alsa-util.c: silence_threshold: 0
    D: [pulseaudio] alsa-util.c: silence_size : 0
    D: [pulseaudio] alsa-util.c: boundary : 6206523236469964800
    D: [pulseaudio] alsa-util.c: appl_ptr : 0
    D: [pulseaudio] alsa-util.c: hw_ptr : 0
    D: [alsa-source] alsa-source.c: Thread starting up
    D: [pulseaudio] alsa-source.c: Requested volume: 0: 61% 1: 61%
    D: [alsa-source] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
    D: [pulseaudio] alsa-source.c: in dB: 0: -13.00 dB 1: -13.00 dB
    I: [alsa-source] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    D: [pulseaudio] alsa-source.c: Got hardware volume: 0: 58% 1: 58%
    D: [pulseaudio] alsa-source.c: in dB: 0: -14.00 dB 1: -14.00 dB
    D: [pulseaudio] alsa-source.c: Calculated software volume: 0: 104% 1: 104% (accurate-enough=no)
    D: [pulseaudio] alsa-source.c: in dB: 0: 1.00 dB 1: 1.00 dB
    I: [alsa-source] alsa-source.c: Starting capture.
    D: [pulseaudio] module-alsa-card.c: Found 7 jacks.
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D: [pulseaudio] module-alsa-card.c: Jack 'Headphone Jack' is now plugged in
    D: [pulseaudio] device-port.c: Setting port analog-output-speaker to status no
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] module-alsa-card.c: Jack 'Headphone Jack' is now plugged in
    D: [pulseaudio] device-port.c: Setting port analog-output-headphones to status yes
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' is now unplugged
    D: [pulseaudio] device-port.c: Setting port hdmi-output-0 to status no
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] module-alsa-card.c: Jack 'Mic Jack' is now unplugged
    D: [pulseaudio] module-alsa-card.c: Jack 'Dock Mic Jack' is now unplugged
    D: [pulseaudio] module-alsa-card.c: Jack 'Dock Mic Jack' is now unplugged
    D: [pulseaudio] device-port.c: Setting port analog-input-microphone-dock to status no
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] module-alsa-card.c: Jack 'Mic Jack' is now unplugged
    D: [pulseaudio] device-port.c: Setting port analog-input-microphone to status no
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="0" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1b.0/sound/card0 (alsa_card.pci-0000_00_1b.0) module loaded.
    D: [pulseaudio] module-udev-detect.c: Ignoring /devices/platform/thinkpad_acpi/sound/card29, because marked so.
    I: [pulseaudio] module-udev-detect.c: Found 1 cards.
    I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-jackdbus-detect.so': success
    D: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
    I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #6; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-bluetooth-discover.so': success
    D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 6ef9d39731256f49a4e920c50000000c as :1.243
    D: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
    I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #7; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-esound-protocol-unix.so': success
    I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: "").
    I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-gconf.so': success
    I: [pulseaudio] module.c: Loaded "module-gconf" (index: #10; argument: "").
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    I: [pulseaudio] module-default-device-restore.c: Restored default sink 'alsa_output.pci-0000_00_1b.0.analog-stereo'.
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    I: [pulseaudio] module-default-device-restore.c: Restored default source 'alsa_input.pci-0000_00_1b.0.analog-stereo'.
    I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #11; argument: "").
    I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #12; argument: "").
    I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13; argument: "").
    I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14; argument: "").
    D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
    D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
    I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-console-kit.so': success
    I: [pulseaudio] client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
    D: [pulseaudio] module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session1
    I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-systemd-login.so': success
    I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17; argument: "").
    I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").
    D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
    D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
    I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-dbus-protocol.so': success
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile2
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile3
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile4
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile5
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile6
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile7
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Card added for object /org/pulseaudio/core1/card0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.DevicePort added for object /org/pulseaudio/core1/sink0/port0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.DevicePort added for object /org/pulseaudio/core1/sink0/port1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.DevicePort added for object /org/pulseaudio/core1/source1/port0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.DevicePort added for object /org/pulseaudio/core1/source1/port1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.DevicePort added for object /org/pulseaudio/core1/source1/port2
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module20
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module21
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
    I: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #22; argument: "").
    D: [pulseaudio] module-switch-on-port-available.c: finding port analog-output-speaker
    D: [pulseaudio] module-switch-on-port-available.c: finding port analog-input-microphone-dock
    D: [pulseaudio] module-switch-on-port-available.c: finding port analog-input-microphone
    D: [pulseaudio] module-switch-on-port-available.c: finding port hdmi-output-0
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #23; argument: "").
    D: [pulseaudio] main.c: Got org.PulseAudio1!
    D: [pulseaudio] main.c: Got org.pulseaudio.Server!
    I: [pulseaudio] main.c: Daemon startup complete.
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module22
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module23
    I: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client1
    D: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
    D: [pulseaudio] protocol-native.c: SHM possible: yes
    D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for amarok
    D: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/kde4/amarok.desktop.
    I: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
    D: [pulseaudio] source.c: Suspend cause of source alsa_input.pci-0000_00_1b.0.analog-stereo is 0x0004, suspending
    I: [alsa-source] alsa-source.c: Device suspended...
    D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    I: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo idle for too long, suspending ...
    D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0004, suspending
    I: [alsa-sink] alsa-sink.c: Device suspended...
    D: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    D: [pulseaudio] reserve-wrap.c: Device lock status of reserve-monitor-wrapper@Audio0 changed: not busy
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    I: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client2
    D: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    I: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=1000 success=1
    D: [pulseaudio] protocol-native.c: SHM possible: yes
    D: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    D: [pulseaudio] module-augment-properties.c: Looking for .desktop file for amarok
    I: [pulseaudio] module-stream-restore.c: Restoring volume for sink input sink-input-by-media-role:music.
    D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0000, resuming
    D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
    I: [alsa-sink] alsa-sink.c: Trying resume...
    I: [alsa-sink] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    D: [alsa-sink] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [alsa-sink] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
    I: [alsa-sink] alsa-util.c: ALSA period wakeups disabled
    D: [alsa-sink] alsa-sink.c: hwbuf_unused=0
    D: [alsa-sink] alsa-sink.c: setting avail_min=87319
    I: [alsa-sink] alsa-sink.c: Time scheduling watermark is 20.00ms
    I: [alsa-sink] alsa-sink.c: Resumed successfully...
    D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
    I: [alsa-sink] alsa-sink.c: Starting playback.
    D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy.
    I: [pulseaudio] resampler.c: Using resampler 'speex-float-0'
    I: [pulseaudio] resampler.c: Using float32le as working format.
    I: [pulseaudio] resampler.c: Choosing speex quality setting 0.
    D: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
    D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
    I: [pulseaudio] sink-input.c: Created input 0 "audio stream" on alsa_output.pci-0000_00_1b.0.analog-stereo with sample spec float32le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink-input.c: media.name = "audio stream"
    I: [pulseaudio] sink-input.c: application.name = "(LibVLC 2.0.1)"
    I: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
    I: [pulseaudio] sink-input.c: native-protocol.version = "26"
    I: [pulseaudio] sink-input.c: application.id = "org.VideoLAN.VLC"
    I: [pulseaudio] sink-input.c: application.version = "2.0.1"
    I: [pulseaudio] sink-input.c: application.icon_name = "vlc"
    I: [pulseaudio] sink-input.c: application.language = "en_US.UTF-8"
    I: [pulseaudio] sink-input.c: application.process.id = "12831"
    I: [pulseaudio] sink-input.c: application.process.user = "user"
    I: [pulseaudio] sink-input.c: application.process.host = "ThinkPad"
    I: [pulseaudio] sink-input.c: application.process.machine_id = "3655b9585a437822f20048730000086c"
    I: [pulseaudio] sink-input.c: application.process.session_id = "3655b9585a437822f20048730000086c-1340342809.561734-495598748"
    I: [pulseaudio] sink-input.c: media.role = "music"
    I: [pulseaudio] sink-input.c: phonon.streamid = "{c851a8bf-3fcc-444e-ade7-d01d56647288}"
    I: [pulseaudio] sink-input.c: application.process.binary = "amarok"
    I: [pulseaudio] sink-input.c: window.x11.display = ":0"
    I: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:music"
    I: [pulseaudio] protocol-native.c: Requested tlength=40.00 ms, minreq=20.00 ms
    D: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
    D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [pulseaudio] protocol-native.c: Requested latency=0.00 ms, Received latency=0.50 ms
    D: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=14296, base=8, prebuf=0, minreq=7056 maxrewind=0
    D: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=14296, base=8, prebuf=0, minreq=7056 maxrewind=0
    I: [pulseaudio] protocol-native.c: Final latency 41.02 ms = 0.52 ms + 2*20.00 ms + 0.50 ms
    D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [alsa-sink] alsa-sink.c: Latency set to 0.50ms
    D: [alsa-sink] alsa-sink.c: hwbuf_unused=352712
    D: [alsa-sink] alsa-sink.c: setting avail_min=88190
    D: [alsa-sink] alsa-sink.c: Requesting rewind due to latency change.
    D: [alsa-sink] alsa-sink.c: Requested volume: 0: 35% 1: 35%
    D: [alsa-sink] alsa-sink.c: in dB: 0: -27.34 dB 1: -27.34 dB
    D: [alsa-sink] alsa-sink.c: Got hardware volume: 0: 35% 1: 35%
    D: [alsa-sink] alsa-sink.c: in dB: 0: -27.20 dB 1: -27.20 dB
    D: [alsa-sink] alsa-sink.c: Calculated software volume: 0: 99% 1: 99% (accurate-enough=yes)
    D: [alsa-sink] alsa-sink.c: in dB: 0: -0.14 dB 1: -0.14 dB
    D: [alsa-sink] sink.c: Volume not changing
    D: [alsa-sink] alsa-sink.c: Requested to rewind 352800 bytes.
    D: [alsa-sink] alsa-sink.c: Limited to 352160 bytes.
    D: [alsa-sink] alsa-sink.c: before: 88040
    D: [alsa-sink] alsa-sink.c: after: 88040
    D: [alsa-sink] alsa-sink.c: Rewound 352160 bytes.
    D: [alsa-sink] sink.c: Processing rewind...
    D: [alsa-sink] sink.c: latency = 2372
    D: [alsa-sink] sink-input.c: Have to rewind 352160 bytes on render memblockq.
    D: [alsa-sink] source.c: Processing rewind...
    D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [pulseaudio] reserve-wrap.c: Device lock status of reserve-monitor-wrapper@Audio0 changed: not busy
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream0
    D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0004, suspending
    I: [alsa-sink] alsa-sink.c: Device suspended...
    I: [pulseaudio] alsa-sink.c: Updating rate for device front:0, new rate is 44100
    I: [pulseaudio] sink.c: Changed sampling rate successfully
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] sink-input.c: Requesting rewind due to uncorking
    D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0000, resuming
    D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
    I: [alsa-sink] alsa-sink.c: Trying resume...
    I: [alsa-sink] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    D: [alsa-sink] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [alsa-sink] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
    I: [alsa-sink] alsa-util.c: ALSA period wakeups disabled
    D: [alsa-sink] alsa-sink.c: Latency set to 0.50ms
    D: [alsa-sink] alsa-sink.c: hwbuf_unused=352712
    D: [alsa-sink] alsa-sink.c: setting avail_min=88190
    I: [alsa-sink] alsa-sink.c: Time scheduling watermark is 0.25ms
    I: [alsa-sink] alsa-sink.c: Resumed successfully...
    I: [alsa-sink] alsa-sink.c: Starting playback.
    D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    I: [alsa-sink] alsa-sink.c: Underrun!
    I: [alsa-sink] alsa-sink.c: Increasing minimal latency to 1.00 ms
    D: [alsa-sink] alsa-sink.c: Latency set to 1.00ms
    D: [alsa-sink] alsa-sink.c: hwbuf_unused=352624
    D: [alsa-sink] alsa-sink.c: setting avail_min=88179
    D: [alsa-sink] protocol-native.c: max_request changed, trying to update from 14296 to 14464.
    D: [alsa-sink] protocol-native.c: Notifying client about increased tlength
    D: [alsa-sink] alsa-sink.c: Latency set to 1.00ms
    D: [alsa-sink] alsa-sink.c: hwbuf_unused=352624
    D: [alsa-sink] alsa-sink.c: setting avail_min=88179
    D: [alsa-sink] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes busy.
    D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0002, suspending
    I: [alsa-sink] alsa-sink.c: Device suspended...
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] reserve-wrap.c: Device unlock of reserve-wrapper@Audio0 has been requested and succeeded.
    D: [pulseaudio] sink.c: Suspend cause of sink alsa_output.pci-0000_00_1b.0.analog-stereo is 0x0000, resuming
    D: [pulseaudio] reserve-wrap.c: Failed to acquire reservation lock on device 'Audio0': Input/output error
    I: [alsa-sink] alsa-sink.c: Trying resume...
    I: [alsa-sink] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    D: [alsa-sink] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [alsa-sink] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 44100 samples).
    I: [alsa-sink] alsa-util.c: ALSA period wakeups disabled
    D: [alsa-sink] alsa-sink.c: Latency set to 1.00ms
    D: [alsa-sink] alsa-sink.c: hwbuf_unused=352624
    D: [alsa-sink] alsa-sink.c: setting avail_min=88179
    D: [alsa-sink] alsa-sink.c: Latency set to 0.50ms
    D: [alsa-sink] alsa-sink.c: hwbuf_unused=352712
    D: [alsa-sink] alsa-sink.c: setting avail_min=88190
    D: [alsa-sink] alsa-sink.c: Requesting rewind due to latency change.
    D: [alsa-sink] alsa-sink.c: Latency set to 0.50ms
    D: [alsa-sink] alsa-sink.c: hwbuf_unused=352712
    D: [alsa-sink] alsa-sink.c: setting avail_min=88190
    I: [alsa-sink] alsa-sink.c: Time scheduling watermark is 0.25ms
    I: [alsa-sink] alsa-sink.c: Resumed successfully...
    I: [alsa-sink] alsa-sink.c: Starting playback.
    I: [alsa-sink] alsa-sink.c: Increasing minimal latency to 1.00 ms
    D: [alsa-sink] alsa-sink.c: Latency set to 1.00ms
    D: [alsa-sink] alsa-sink.c: hwbuf_unused=352624
    D: [alsa-sink] alsa-sink.c: setting avail_min=88179
    D: [alsa-sink] alsa-sink.c: Latency set to 1.00ms
    D: [alsa-sink] alsa-sink.c: hwbuf_unused=352624
    D: [alsa-sink] alsa-sink.c: setting avail_min=88179
    D: [pulseaudio] reserve-wrap.c: Device lock status of reserve-monitor-wrapper@Audio0 changed: not busy
    D: [pulseaudio] reserve-wrap.c: Device lock status of reserve-monitor-wrapper@Audio0 changed: not busy
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] protocol-native.c: Requesting rewind due to end of underrun.
    D: [alsa-sink] ratelimit.c: 11409 events suppressed
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] ratelimit.c: 7449 events suppressed
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] ratelimit.c: 6472 events suppressed
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] ratelimit.c: 7494 events suppressed
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] memblock.c: Pool full
    D: [alsa-sink] sink-input.c: Requesting rewind due to corking
    D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_00_1b.0.analog-stereo becomes idle, timeout in 5 seconds.
    D: [alsa-sink] ratelimit.c: 7445 events suppressed
    D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
    D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
    D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
    D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
    D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
    D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
    D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
    D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
    D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
    D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)
    D: [alsa-sink] flist.c: pulsecore/memblockq.c: list_items flist is full (don't worry)

  • [solved] No sound, ALSA finds soundcard, pulseaudio does not.

    Problem:
    pulseaudio can't find my soundcard (or it can't find ALSA, not sure). It falls back to a dummy-output and no input so i can't play sounds or use my mic.
    First appeared when:
    Installing software updates like a month ago. I ignored it at first in the hopes it will resolve itself with the next update an few dates later. It didn't so far. None of the packets I updated had linux|pulse|alsa|sound|audio in its name. So i guess it just triggered the problem in a indirect way.
    What did not help:
    Reinstalling packets with pulse|alsa|sound|audio in its name.
    Deleting ${HOME}/.pulse* .
    Rebooting.
    Resetting /etc/pulse/* or /etc/asound.conf to the defaults of the packaes they come with.
    Adding or removing my user to the audio group.
    Googling. Other threads i this forum.
    Additional infos:
    (Stuff that was requested from others which had similar problems. No other [solved]-threads were helping me so far.)
    /dev/dsp does not exist.
    fuser -v /dev/snd/* returns nothing
    aplay whatever.wav produces no sound.
    aplay -D sysdefault whatever.wav works.
    Using Gnome 3 started with gdm.
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=Intel
    HDA Intel, ALC272 Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=Intel,DEV=0
    HDA Intel, HDMI 0
    HDMI Audio Output
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b76a0fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b76a1000-0x00000000b76a6fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b76a7000-0x00000000b77d1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b77d2000-0x00000000b780efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b780f000-0x00000000b7908fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7909000-0x00000000b7b0efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b0f000-0x00000000b7b18fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b19000-0x00000000b7b1efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b1f000-0x00000000b7b62fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b63000-0x00000000b7b9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b9f000-0x00000000b7be4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7be5000-0x00000000b7bfefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000b7bff000-0x00000000b7bfffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7c00000-0x00000000b7dfffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Dell Inc. Inspiron 1370/0R8PR3, BIOS A01 09/15/2009
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0xb7c00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-D3FFF write-protect
    [ 0.000000] D4000-DBFFF uncachable
    [ 0.000000] DC000-EFFFF write-back
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0B8000000 mask FF8000000 uncachable
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0FFE40000 mask FFFFC0000 write-protect
    [ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f6bf0-0x000f6bff] mapped at [ffff8800000f6bf0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xb7bfffff]
    [ 0.000000] [mem 0x00000000-0xb7bfffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xb7bfffff @ [mem 0x1fffc000-0x1fffffff]
    [ 0.000000] RAMDISK: [mem 0x376e2000-0x37b68fff]
    [ 0.000000] ACPI: RSDP 00000000000f6b10 00024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 00000000b7bf7369 00064 (v01 DELL CL09 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000b7be7000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 00000000b7be8000 077A9 (v02 Dell CANTIGA 06040000 INTL 20060608)
    [ 0.000000] ACPI: FACS 00000000b7b9efc0 00040
    [ 0.000000] ACPI: HPET 00000000b7bfed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 00000000b7bfed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: OSFR 00000000b7bfed8a 00070 (v01 DELL DELL 06040000 ASL 00000061)
    [ 0.000000] ACPI: APIC 00000000b7bfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000b7bfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000b7bfee8a 00176 (v01 DELL CL09 06040000 LTP 00000000)
    [ 0.000000] ACPI: SSDT 00000000b7be6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b7bfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb7bfffff]
    [ 0.000000] NODE_DATA [mem 0xb7be1000-0xb7be4fff]
    [ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b4000000-ffff8800b6dfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0xb76a0fff]
    [ 0.000000] node 0: [mem 0xb76a7000-0xb77d1fff]
    [ 0.000000] node 0: [mem 0xb780f000-0xb7908fff]
    [ 0.000000] node 0: [mem 0xb7b0f000-0xb7b18fff]
    [ 0.000000] node 0: [mem 0xb7b1f000-0xb7b62fff]
    [ 0.000000] node 0: [mem 0xb7b9f000-0xb7be4fff]
    [ 0.000000] node 0: [mem 0xb7bff000-0xb7bfffff]
    [ 0.000000] On node 0 totalpages: 751850
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3913 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11696 pages used for memmap
    [ 0.000000] DMA32 zone: 736171 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
    [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000b76a1000 - 00000000b76a7000
    [ 0.000000] PM: Registered nosave memory: 00000000b77d2000 - 00000000b780f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7909000 - 00000000b7b0f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7b19000 - 00000000b7b1f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7b63000 - 00000000b7b9f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7be5000 - 00000000b7bff000
    [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b7400000 s84608 r8192 d21888 u1048576
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 740084
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2944188k/3010560k available (4727k kernel code, 3160k absent, 63212k reserved, 4143k data, 772k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 12058624 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1296.696 MHz processor
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.45 BogoMIPS (lpj=4322320)
    [ 0.003343] pid_max: default: 32768 minimum: 301
    [ 0.003400] Security Framework initialized
    [ 0.003407] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003948] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.006850] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.008132] Mount-cache hash table entries: 256
    [ 0.008498] Initializing cgroup subsys cpuacct
    [ 0.008503] Initializing cgroup subsys memory
    [ 0.008517] Initializing cgroup subsys devices
    [ 0.008520] Initializing cgroup subsys freezer
    [ 0.008522] Initializing cgroup subsys net_cls
    [ 0.008525] Initializing cgroup subsys blkio
    [ 0.008570] CPU: Physical Processor ID: 0
    [ 0.008572] CPU: Processor Core ID: 0
    [ 0.008575] mce: CPU supports 6 MCE banks
    [ 0.008587] CPU0: Thermal monitoring enabled (TM2)
    [ 0.008592] process: using mwait in idle threads
    [ 0.008600] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift is 0xffffffff
    [ 0.010851] ACPI: Core revision 20120711
    [ 0.016699] ftrace: allocating 18348 entries in 72 pages
    [ 0.027201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061706] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz stepping 0a
    [ 0.063329] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.063329] ... version: 2
    [ 0.063329] ... bit width: 40
    [ 0.063329] ... generic registers: 2
    [ 0.063329] ... value mask: 000000ffffffffff
    [ 0.063329] ... max period: 000000007fffffff
    [ 0.063329] ... fixed-purpose events: 3
    [ 0.063329] ... event mask: 0000000700000003
    [ 0.086782] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.100007] smpboot: Booting Node 0, Processors #1 OK
    [ 0.113162] Brought up 2 CPUs
    [ 0.113162] smpboot: Total of 2 processors activated (5188.90 BogoMIPS)
    [ 0.113436] devtmpfs: initialized
    [ 0.116686] PM: Registering ACPI NVS region [mem 0xb7b63000-0xb7b9efff] (245760 bytes)
    [ 0.121465] NET: Registered protocol family 16
    [ 0.121699] ACPI: bus type pci registered
    [ 0.121824] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.121828] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.174683] PCI: Using configuration type 1 for base access
    [ 0.175619] bio: create slab <bio-0> at 0
    [ 0.175619] ACPI: Added _OSI(Module Device)
    [ 0.175619] ACPI: Added _OSI(Processor Device)
    [ 0.175619] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.175619] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.178073] ACPI: EC: Look up EC in DSDT
    [ 0.182902] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.188123] ACPI: SSDT 00000000b7b1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [ 0.188671] ACPI: Dynamic OEM Table Load:
    [ 0.188676] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [ 0.188875] ACPI: SSDT 00000000b7b19620 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [ 0.189399] ACPI: Dynamic OEM Table Load:
    [ 0.189404] ACPI: SSDT (null) 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [ 0.189425] ACPI: SSDT 00000000b7b1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    [ 0.190407] ACPI: Dynamic OEM Table Load:
    [ 0.190412] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    [ 0.190429] ACPI: SSDT 00000000b7b1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    [ 0.190693] ACPI: Dynamic OEM Table Load:
    [ 0.190698] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    [ 0.190715] ACPI: Interpreter enabled
    [ 0.190715] ACPI: (supports S0 S3 S4 S5)
    [ 0.190715] ACPI: Using IOAPIC for interrupt routing
    [ 0.323314] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    [ 0.323314] ACPI: No dock devices found.
    [ 0.323314] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.323314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.323314] PCI host bridge to bus 0000:00
    [ 0.323314] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
    [ 0.323314] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.323314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.323314] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    [ 0.323314] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
    [ 0.323314] DMAR: Forcing write-buffer flush capability
    [ 0.323314] DMAR: Disabling IOMMU for graphics on this chipset
    [ 0.323314] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
    [ 0.323314] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
    [ 0.323314] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.323314] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
    [ 0.323314] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
    [ 0.323314] pci 0000:00:02.1: reg 10: [mem 0xf0400000-0xf04fffff 64bit]
    [ 0.323314] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
    [ 0.323314] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
    [ 0.323314] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
    [ 0.323314] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
    [ 0.323314] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
    [ 0.323314] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]
    [ 0.323314] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
    [ 0.323314] pci 0000:00:1a.7: reg 10: [mem 0xf0804800-0xf0804bff]
    [ 0.323314] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.323314] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
    [ 0.323314] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
    [ 0.323314] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.323342] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
    [ 0.323470] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.323513] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
    [ 0.323640] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.323688] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
    [ 0.323816] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.323860] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
    [ 0.323931] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
    [ 0.324017] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
    [ 0.324087] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
    [ 0.324173] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
    [ 0.324243] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
    [ 0.324346] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
    [ 0.324379] pci 0000:00:1d.7: reg 10: [mem 0xf0804c00-0xf0804fff]
    [ 0.324516] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.324552] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.324666] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
    [ 0.324866] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
    [ 0.324900] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
    [ 0.324915] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
    [ 0.324931] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
    [ 0.324946] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
    [ 0.324960] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
    [ 0.324975] pci 0000:00:1f.2: reg 24: [mem 0xf0804000-0xf08047ff]
    [ 0.325062] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.325096] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
    [ 0.325123] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
    [ 0.325160] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
    [ 0.325277] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
    [ 0.325283] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.325366] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
    [ 0.325632] pci 0000:08:00.0: [14e4:4315] type 00 class 0x028000
    [ 0.325707] pci 0000:08:00.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
    [ 0.326109] pci 0000:08:00.0: supports D1 D2
    [ 0.326112] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
    [ 0.326304] pci 0000:00:1c.1: PCI bridge to [bus 08]
    [ 0.326314] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.326391] pci_bus 0000:20: busn_res: [bus 20] is inserted under [bus 00-ff]
    [ 0.326477] pci 0000:20:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.326546] pci 0000:20:00.0: reg 10: [io 0x2000-0x20ff]
    [ 0.326670] pci 0000:20:00.0: reg 18: [mem 0xf0904000-0xf0904fff 64bit pref]
    [ 0.326745] pci 0000:20:00.0: reg 20: [mem 0xf0900000-0xf0903fff 64bit pref]
    [ 0.326794] pci 0000:20:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.327093] pci 0000:20:00.0: supports D1 D2
    [ 0.327096] pci 0000:20:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.327302] pci 0000:00:1c.5: PCI bridge to [bus 20]
    [ 0.327309] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 0.327323] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
    [ 0.327363] pci_bus 0000:26: busn_res: [bus 26] is inserted under [bus 00-ff]
    [ 0.327435] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
    [ 0.327452] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.327456] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.327460] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.327463] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.327467] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [ 0.327471] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.327505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.327638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.327717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.327766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.327824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.327883] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.327886] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.334993] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.335069] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.335141] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.335212] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.335283] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.335355] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
    [ 0.335424] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.335495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.336671] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.336689] vgaarb: loaded
    [ 0.336691] vgaarb: bridge control possible 0000:00:02.0
    [ 0.336769] PCI: Using ACPI for IRQ routing
    [ 0.348092] PCI: pci_cache_line_size set to 64 bytes
    [ 0.348605] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.348608] e820: reserve RAM buffer [mem 0xb76a1000-0xb7ffffff]
    [ 0.348614] e820: reserve RAM buffer [mem 0xb77d2000-0xb7ffffff]
    [ 0.348619] e820: reserve RAM buffer [mem 0xb7909000-0xb7ffffff]
    [ 0.348623] e820: reserve RAM buffer [mem 0xb7b19000-0xb7ffffff]
    [ 0.348627] e820: reserve RAM buffer [mem 0xb7b63000-0xb7ffffff]
    [ 0.348631] e820: reserve RAM buffer [mem 0xb7be5000-0xb7ffffff]
    [ 0.348634] e820: reserve RAM buffer [mem 0xb7c00000-0xb7ffffff]
    [ 0.348791] NetLabel: Initializing
    [ 0.348794] NetLabel: domain hash size = 128
    [ 0.348796] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.348816] NetLabel: unlabeled traffic allowed by default
    [ 0.348840] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.348847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.348855] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.370000] Switching to clocksource hpet
    [ 0.381464] pnp: PnP ACPI init
    [ 0.381496] ACPI: bus type pnp registered
    [ 0.382022] pnp 00:00: [bus 00-ff]
    [ 0.382027] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.382031] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.382035] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.382039] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.382042] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.382046] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.382050] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.382053] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.382057] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.382060] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.382064] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.382067] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.382071] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.382075] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.382078] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.382086] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.382089] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.382093] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [ 0.382097] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.382100] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.382200] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.440057] pnp 00:01: [io 0x0000-0x001f]
    [ 0.440061] pnp 00:01: [io 0x0081-0x0091]
    [ 0.440065] pnp 00:01: [io 0x0093-0x009f]
    [ 0.440068] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.440072] pnp 00:01: [dma 4]
    [ 0.440121] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.440232] pnp 00:02: [mem 0xfed00000-0xfed003ff]
    [ 0.440329] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.440336] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.440353] pnp 00:03: [io 0x00f0]
    [ 0.440369] pnp 00:03: [irq 13]
    [ 0.440414] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.440433] pnp 00:04: [io 0x002e-0x002f]
    [ 0.440436] pnp 00:04: [io 0x0061]
    [ 0.440439] pnp 00:04: [io 0x0063]
    [ 0.440443] pnp 00:04: [io 0x0065]
    [ 0.440446] pnp 00:04: [io 0x0067]
    [ 0.440449] pnp 00:04: [io 0x0070]
    [ 0.440452] pnp 00:04: [io 0x0080]
    [ 0.440456] pnp 00:04: [io 0x0092]
    [ 0.440459] pnp 00:04: [io 0x00b2-0x00b3]
    [ 0.440462] pnp 00:04: [io 0x0480-0x048f]
    [ 0.440466] pnp 00:04: [io 0xffff]
    [ 0.440469] pnp 00:04: [io 0xffff]
    [ 0.440472] pnp 00:04: [io 0x0400-0x047f]
    [ 0.440475] pnp 00:04: [io 0x1180-0x11ff]
    [ 0.440479] pnp 00:04: [io 0xfe00]
    [ 0.440482] pnp 00:04: [io 0xff2c-0xff7f]
    [ 0.440574] system 00:04: [io 0x0480-0x048f] has been reserved
    [ 0.440578] system 00:04: [io 0xffff] has been reserved
    [ 0.440583] system 00:04: [io 0xffff] has been reserved
    [ 0.440587] system 00:04: [io 0x0400-0x047f] has been reserved
    [ 0.440591] system 00:04: [io 0x1180-0x11ff] has been reserved
    [ 0.440596] system 00:04: [io 0xfe00] has been reserved
    [ 0.440600] system 00:04: [io 0xff2c-0xff7f] has been reserved
    [ 0.440606] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.440620] pnp 00:05: [io 0x0070-0x0077]
    [ 0.440629] pnp 00:05: [irq 8]
    [ 0.440674] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.440691] pnp 00:06: [io 0x0060]
    [ 0.440694] pnp 00:06: [io 0x0064]
    [ 0.440703] pnp 00:06: [irq 1]
    [ 0.440753] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.440772] pnp 00:07: [irq 12]
    [ 0.440819] pnp 00:07: Plug and Play ACPI device, IDs DLL0418 PNP0f13 (active)
    [ 0.441027] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
    [ 0.441031] pnp 00:08: [mem 0xfed10000-0xfed13fff]
    [ 0.441034] pnp 00:08: [mem 0xfed18000-0xfed18fff]
    [ 0.441038] pnp 00:08: [mem 0xfed19000-0xfed19fff]
    [ 0.441041] pnp 00:08: [mem 0xe0000000-0xefffffff]
    [ 0.441045] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
    [ 0.441048] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
    [ 0.441146] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.441151] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.441155] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.441159] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.441164] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.441168] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.441172] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.441178] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.441356] pnp: PnP ACPI: found 9 devices
    [ 0.441359] ACPI: ACPI bus type pnp unregistered
    [ 0.449759] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.449766] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.449771] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.449786] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
    [ 0.449791] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
    [ 0.449807] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 20] add_size 400000
    [ 0.449828] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.449833] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.449837] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.449841] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
    [ 0.449845] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.449849] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.449858] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
    [ 0.449864] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
    [ 0.449869] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
    [ 0.449874] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc0afffff]
    [ 0.449880] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.449885] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.449890] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0b00000-0xc0b000ff 64bit]
    [ 0.449908] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.449913] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.449922] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
    [ 0.449929] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
    [ 0.449939] pci 0000:00:1c.1: PCI bridge to [bus 08]
    [ 0.449944] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.449953] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.449960] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
    [ 0.449971] pci 0000:20:00.0: BAR 6: assigned [mem 0xf0920000-0xf093ffff pref]
    [ 0.449975] pci 0000:00:1c.5: PCI bridge to [bus 20]
    [ 0.449980] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 0.449989] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc0afffff]
    [ 0.449996] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
    [ 0.450021] pci 0000:00:1e.0: PCI bridge to [bus 26]
    [ 0.450083] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.450089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.450093] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.450097] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.450101] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.450105] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
    [ 0.450108] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.450112] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 0.450116] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
    [ 0.450120] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
    [ 0.450124] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
    [ 0.450127] pci_bus 0000:08: resource 1 [mem 0xf0500000-0xf05fffff]
    [ 0.450131] pci_bus 0000:08: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
    [ 0.450135] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
    [ 0.450139] pci_bus 0000:20: resource 1 [mem 0xc0600000-0xc0afffff]
    [ 0.450142] pci_bus 0000:20: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref]
    [ 0.450146] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7]
    [ 0.450150] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff]
    [ 0.450154] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.450157] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.450161] pci_bus 0000:26: resource 8 [mem 0xc0000000-0xdfffffff]
    [ 0.450165] pci_bus 0000:26: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.450219] NET: Registered protocol family 2
    [ 0.451401] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.456144] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.456812] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.456888] TCP: reno registered
    [ 0.456903] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.456958] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.457123] NET: Registered protocol family 1
    [ 0.457150] pci 0000:00:02.0: Boot video device
    [ 0.457669] PCI: CLS 64 bytes, default 64
    [ 0.457746] Unpacking initramfs...
    [ 0.626300] Freeing initrd memory: 4636k freed
    [ 0.628543] Simple Boot Flag at 0x3e set to 0x1
    [ 0.629045] audit: initializing netlink socket (disabled)
    [ 0.629069] type=2000 audit(1354288244.626:1): initialized
    [ 0.648430] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.651510] VFS: Disk quotas dquot_6.5.2
    [ 0.651590] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.651831] msgmni has been set to 5759
    [ 0.652156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.652204] io scheduler noop registered
    [ 0.652208] io scheduler deadline registered
    [ 0.652301] io scheduler cfq registered (default)
    [ 0.652518] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.652689] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.652857] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.653107] intel_idle: does not run on family 6 model 23
    [ 0.653156] GHES: HEST is not enabled!
    [ 0.653245] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.653953] Linux agpgart interface v0.103
    [ 0.654073] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.669080] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.669133] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.669294] mousedev: PS/2 mouse device common for all mice
    [ 0.670409] rtc_cmos 00:05: RTC can wake from S4
    [ 0.670599] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.670636] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.670648] cpuidle: using governor ladder
    [ 0.670651] cpuidle: using governor menu
    [ 0.670829] drop_monitor: Initializing network drop monitor service
    [ 0.670946] TCP: cubic registered
    [ 0.671122] NET: Registered protocol family 10
    [ 0.671359] NET: Registered protocol family 17
    [ 0.671373] Key type dns_resolver registered
    [ 0.671720] PM: Hibernation image not present or could not be loaded.
    [ 0.671743] registered taskstats version 1
    [ 0.672782] rtc_cmos 00:05: setting system clock to 2012-11-30 15:10:45 UTC (1354288245)
    [ 0.674872] Freeing unused kernel memory: 772k freed
    [ 0.675168] Write protecting the kernel read-only data: 8192k
    [ 0.682434] Freeing unused kernel memory: 1408k freed
    [ 0.683107] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.685881] Freeing unused kernel memory: 568k freed
    [ 0.698116] systemd-udevd[43]: starting version 195
    [ 0.701918] SCSI subsystem initialized
    [ 0.703991] ACPI: bus type scsi registered
    [ 0.704082] libata version 3.00 loaded.
    [ 0.705773] ahci 0000:00:1f.2: version 3.0
    [ 0.705858] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 0.705949] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    [ 0.705955] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
    [ 0.705962] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.708617] scsi0 : ahci
    [ 0.709413] scsi1 : ahci
    [ 0.709823] scsi2 : ahci
    [ 0.710229] scsi3 : ahci
    [ 0.710359] ata1: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804100 irq 43
    [ 0.710365] ata2: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804180 irq 43
    [ 0.710367] ata3: DUMMY
    [ 0.710370] ata4: DUMMY
    [ 1.196712] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.196745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.198401] ata1.00: ATA-8: WDC WD3200BEKT-75F3T0, 11.01A11, max UDMA/133
    [ 1.198405] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.200123] ata1.00: configured for UDMA/133
    [ 1.200301] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-7 11.0 PQ: 0 ANSI: 5
    [ 1.201956] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.202042] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.202047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.202083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.213584] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633F, D500, max UDMA/100
    [ 1.213590] ata2.00: applying bridge limits
    [ 1.229911] ata2.00: configured for UDMA/100
    [ 1.232328] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633F D500 PQ: 0 ANSI: 5
    [ 1.270602] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
    [ 1.271452] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.273864] ACPI: bus type usb registered
    [ 1.273912] usbcore: registered new interface driver usbfs
    [ 1.273946] usbcore: registered new interface driver hub
    [ 1.273996] usbcore: registered new device driver usb
    [ 1.274813] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.274869] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 1.274876] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 1.274891] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 1.278814] ehci_hcd 0000:00:1a.7: debug port 1
    [ 1.278826] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.278852] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0804800
    [ 1.279113] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.279117] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.280054] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.286696] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.286950] hub 1-0:1.0: USB hub found
    [ 1.286958] hub 1-0:1.0: 6 ports detected
    [ 1.287158] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.287164] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.287174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 1.291082] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.291093] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.291118] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0804c00
    [ 1.300028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.300266] hub 2-0:1.0: USB hub found
    [ 1.300273] hub 2-0:1.0: 6 ports detected
    [ 1.301086] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.301130] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.301135] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.301145] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.301191] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
    [ 1.301506] hub 3-0:1.0: USB hub found
    [ 1.301513] hub 3-0:1.0: 2 ports detected
    [ 1.301640] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.301645] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.301654] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 1.301701] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
    [ 1.301997] hub 4-0:1.0: USB hub found
    [ 1.302004] hub 4-0:1.0: 2 ports detected
    [ 1.302158] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 1.302164] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 1.302198] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 1.302230] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
    [ 1.302434] hub 5-0:1.0: USB hub found
    [ 1.302441] hub 5-0:1.0: 2 ports detected
    [ 1.302557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.302562] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.302572] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.302603] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
    [ 1.302824] hub 6-0:1.0: USB hub found
    [ 1.302833] hub 6-0:1.0: 2 ports detected
    [ 1.303165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.303171] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.303186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.303219] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
    [ 1.303759] hub 7-0:1.0: USB hub found
    [ 1.303766] hub 7-0:1.0: 2 ports detected
    [ 1.303897] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.303903] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.303995] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.304040] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
    [ 1.304881] hub 8-0:1.0: USB hub found
    [ 1.304888] hub 8-0:1.0: 2 ports detected
    [ 1.323613] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 1.330105] [drm] Initialized drm 1.1.0 20060810
    [ 1.331660] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
    [ 1.331843] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 1.333755] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
    [ 1.333940] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 1.334797] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 1.334889] ACPI: Lid Switch [LID0]
    [ 1.335079] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 1.335086] ACPI: Power Button [PWRB]
    [ 1.335191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 1.335196] ACPI: Power Button [PWRF]
    [ 1.341526] i915 0000:00:02.0: setting latency timer to 64
    [ 1.414990] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 1.415006] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 1.415008] [drm] Driver supports precise vblank timestamp query.
    [ 1.415071] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.606699] usb 2-4: new high-speed USB device number 2 using ehci_hcd
    [ 1.630029] tsc: Refined TSC clocksource calibration: 1296.749 MHz
    [ 1.630036] Switching to clocksource tsc
    [ 2.030864] fbcon: inteldrmfb (fb0) is primary device
    [ 2.090024] usb 2-5: new high-speed USB device number 3 using ehci_hcd
    [ 2.574662] Console: switching to colour frame buffer device 170x48
    [ 2.579271] fb0: inteldrmfb frame buffer device
    [ 2.579273] drm: registered panic notifier
    [ 2.680113] acpi device:07: registered as cooling_device0
    [ 2.780104] acpi device:08: registered as cooling_device1
    [ 2.780177] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 2.780313] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
    [ 2.780358] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 2.963907] device-mapper: uevent: version 1.0.3
    [ 2.964084] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
    [ 3.763615] atkbd serio0: Unknown key pressed (translated set 2, code 0x8e on isa0060/serio0).
    [ 3.763622] atkbd serio0: Use 'setkeycodes e00e <keycode>' to make it known.
    [ 9.679599] XFS (dm-0): Mounting Filesystem
    [ 9.807350] XFS (dm-0): Ending clean mount
    [ 10.447920] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
    [ 10.481565] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 10.507375] systemd[1]: Set hostname to <xxx-laptop>.
    [ 11.844864] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 11.845276] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 11.845371] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 11.845393] systemd[1]: Starting Login Prompts.
    [ 11.845414] systemd[1]: Reached target Login Prompts.
    [ 11.845429] systemd[1]: Starting Arch Daemons.
    [ 11.845447] systemd[1]: Reached target Arch Daemons.
    [ 11.845462] systemd[1]: Starting Remote File Systems.
    [ 11.845481] systemd[1]: Reached target Remote File Systems.
    [ 11.845496] systemd[1]: Starting Syslog Socket.
    [ 11.845558] systemd[1]: Listening on Syslog Socket.
    [ 11.845576] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 11.845615] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 11.845630] systemd[1]: Starting Delayed Shutdown Socket.
    [ 11.845668] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 11.845766] systemd[1]: Starting udev Kernel Socket.
    [ 11.845804] systemd[1]: Listening on udev Kernel Socket.
    [ 11.845885] systemd[1]: Starting udev Control Socket.
    [ 11.845927] systemd[1]: Listening on udev Control Socket.
    [ 11.845979] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 11.846139] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 11.846157] systemd[1]: Expecting device dev-mapper-home.device...
    [ 11.846175] systemd[1]: Expecting device dev-sda8.device...
    [ 11.846193] systemd[1]: Expecting device dev-mapper-swap.device...
    [ 11.846210] systemd[1]: Expecting device dev-sda6.device...
    [ 11.846232] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 11.846291] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 11.846308] systemd[1]: Expecting device dev-disk-by\x2duuid-f19efb1f\x2d9a5b\x2d4f22\x2db35d\x2d4a603145a436.device...
    [ 11.846328] systemd[1]: Expecting device dev-disk-by\x2duuid-bd984744\x2d036e\x2d47e5\x2db40f\x2d04fa9f6d0f35.device...
    [ 11.846347] systemd[1]: Expecting device dev-disk-by\x2duuid-f1bab4e5\x2de736\x2d443a\x2d827e\x2d59f202a548ab.device...
    [ 11.846368] systemd[1]: Starting Journal Socket.
    [ 11.846439] systemd[1]: Listening on Journal Socket.
    [ 11.846467] systemd[1]: Started File System Check on Root Device.
    [ 11.846485] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 11.850382] systemd[1]: Mounting Temporary Directory...
    [ 11.998839] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)
    [ 12.026864] systemd[1]: Mounting Huge Pages File System...
    [ 12.040270] systemd[1]: Mounting POSIX Message Queue File System...
    [ 12.043518] systemd[1]: Starting udev Coldplug all Devices...
    [ 12.156149] systemd[1]: Starting Load Kernel Modules...
    [ 12.173525] systemd[1]: Mounting Debug File System...
    [ 12.186770] systemd[1]: Starting Setup Virtual Console...
    [ 12.484840] systemd[1]: Starting Apply Kernel Variables...
    [ 12.616915] systemd[1]: Starting Set Up Additional Binary Formats...
    [ 12.630266] systemd[1]: Starting udev Kernel Device Manager...
    [ 12.636850] systemd[1]: Starting Journal Service...
    [ 12.646587] systemd[1]: Started Journal Service.
    [ 12.646650] systemd[1]: Starting Syslog.
    [ 12.646684] systemd[1]: Reached target Syslog.
    [ 12.647637] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 12.647816] systemd[1]: Mounted Temporary Directory.
    [ 12.647972] systemd[1]: Mounted Huge Pages File System.
    [ 12.648127] systemd[1]: Mounted POSIX Message Queue File System.
    [ 12.653654] systemd[1]: Mounted Debug File System.
    [ 12.653705] systemd[1]: Starting Local File Systems (Pre).
    [ 12.653726] systemd[1]: Reached target Local File Systems (Pre).
    [ 12.653749] systemd[1]: Starting Load Random Seed...
    [ 12.705203] FS-Cache: Loaded
    [ 12.740616] RPC: Registered named UNIX socket transport module.
    [ 12.740621] RPC: Registered udp transport module.
    [ 12.740624] RPC: Registered tcp transport module.
    [ 12.740626] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 12.881473] systemd-udevd[162]: starting version 196
    [ 12.988696] FS-Cache: Netfs 'nfs' registered for caching
    [ 13.298794] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 13.299212] r8169 0000:20:00.0: irq 45 for MSI/MSI-X
    [ 13.299501] r8169 0000:20:00.0: eth0: RTL8168d/8111d at 0xffffc9000060e000, 00:26:b9:ca:52:29, XID 081000c0 IRQ 45
    [ 13.299506] r8169 0000:20:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 13.401185] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 13.802403] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 14.148667] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 14.148733] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 14.208405] cfg80211: Calling CRDA to update world regulatory domain
    [ 14.318480] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
    [ 14.330974] lib80211: common routines for IEEE802.11 drivers
    [ 14.330979] lib80211_crypt: registered algorithm 'NULL'
    [ 14.375031] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 14.649332] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
    [ 14.656959] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
    [ 14.660799] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
    [ 14.668564] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 14.709327] ACPI: Requesting acpi_cpufreq
    [ 14.714946] Monitor-Mwait will be used to enter C-1 state
    [ 14.714973] Monitor-Mwait will be used to enter C-2 state
    [ 14.714989] Monitor-Mwait will be used to enter C-3 state
    [ 14.715001] tsc: Marking TSC unstable due to TSC halts in idle
    [ 14.715031] ACPI: acpi_idle registered with cpuidle
    [ 14.720557] Switching to clocksource hpet
    [ 14.757813] wmi: Mapper loaded
    [ 15.215288] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
    [ 15.215300] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 15.215306] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
    [ 15.215313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 15.215315] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 15.303785] ACPI: Battery Slot [BAT1] (battery present)
    [ 15.405750] input: Dell WMI hotkeys as /devices/virtual/input/input8
    [ 15.417769] iTCO_vendor_support: vendor-support=0
    [ 15.430131] ACPI: AC Adapter [ACAD] (off-line)
    [ 15.471845] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 15.471895] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
    [ 15.472076] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 15.585541] wl: module license 'Mixed/Proprietary' taints kernel.
    [ 15.585549] Disabling lock debugging due to kernel taint
    [ 15.625424] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 528343
    [ 15.629342] INFO @wl_cfg80211_attach : Registered CFG80211 phy
    [ 15.654093] lib80211_crypt: registered algorithm 'TKIP'
    [ 15.654584] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
    [ 15.693893] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
    [ 15.816131] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
    [ 15.816143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 16.108446] Linux media interface: v0.10
    [ 16.120558] Linux video capture interface: v2.00
    [ 16.169228] usbcore: registered new interface driver uas
    [ 16.281166] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6415)
    [ 16.316308] Initializing USB Mass Storage driver...
    [ 16.316609] usbcore: registered new interface driver usb-storage
    [ 16.316613] USB Mass Storage support registered.
    [ 16.328744] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input10
    [ 16.328873] usbcore: registered new interface driver uvcvideo
    [ 16.328876] USB Video Class driver (1.1.1)
    [ 16.779720] usb 2-4: USB disconnect, device number 2
    [ 16.783629] scsi4 : usb-storage 2-4:1.0
    [ 16.783773] usbcore: registered new interface driver ums-realtek
    [ 17.381988] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
    [ 17.393596] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 21.567415] Adding 977880k swap on /dev/mapper/swap. Priority:-1 extents:1 across:977880k
    [ 21.656824] XFS (dm-1): Mounting Filesystem
    [ 21.839619] XFS (dm-1): Ending clean mount
    [ 21.940898] systemd-journald[163]: Received SIGUSR1
    [ 28.055735] r8169 0000:20:00.0: eth0: link down
    [ 28.055792] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 28.875645] Bluetooth: Core ver 2.16
    [ 28.875677] NET: Registered protocol family 31
    [ 28.875680] Bluetooth: HCI device and connection manager initialized
    [ 28.875684] Bluetooth: HCI socket layer initialized
    [ 28.875687] Bluetooth: L2CAP socket layer initialized
    [ 28.875695] Bluetooth: SCO socket layer initialized
    [ 29.041069] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 37.807702] fuse init (API version 7.20)
    [ 37.828734] EXT4-fs (sda5): re-mounted. Opts: commit=600
    lsmod
    Module Size Used by
    fuse 69173 2
    michael_mic 2074 8
    arc4 2039 4
    ecb 2105 0
    bnep 8857 2
    bluetooth 192120 7 bnep
    snd_seq 50881 1
    snd_seq_device 5268 1 snd_seq
    ums_realtek 7391 0
    usb_storage 47384 1 ums_realtek
    uvcvideo 72787 0
    videobuf2_vmalloc 2468 1 uvcvideo
    uas 11119 0
    videobuf2_memops 2246 1 videobuf2_vmalloc
    videobuf2_core 24030 1 uvcvideo
    videodev 100859 2 uvcvideo,videobuf2_core
    media 10405 2 uvcvideo,videodev
    i2c_i801 9571 0
    joydev 9991 0
    coretemp 6070 0
    kvm_intel 124749 0
    lib80211_crypt_tkip 7738 0
    wl 2558087 0
    kvm 373917 1 kvm_intel
    iTCO_wdt 5255 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    dell_wmi 1485 0
    acpi_cpufreq 5933 1
    lpc_ich 10609 0
    ac 2536 0
    mperf 1267 1 acpi_cpufreq
    sparse_keymap 3056 1 dell_wmi
    battery 6773 0
    wmi 8379 1 dell_wmi
    dell_laptop 8787 0
    processor 26855 3 acpi_cpufreq
    evdev 10266 12
    psmouse 71909 0
    serio_raw 4689 0
    dcdbas 5520 1 dell_laptop
    lib80211 3949 2 wl,lib80211_crypt_tkip
    microcode 12377 0
    cfg80211 177108 1 wl
    rfkill 15604 5 cfg80211,bluetooth
    snd_hda_codec_hdmi 24487 1
    snd_hda_codec_realtek 61193 1
    snd_hda_intel 26180 3
    snd_hda_codec 98033 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6428 1 snd_hda_codec
    snd_pcm_oss 38992 0
    snd_pcm 75689 5 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
    snd_timer 18934 3 snd_pcm,snd_seq
    snd_mixer_oss 15347 1 snd_pcm_oss
    snd 60188 16 snd_hda_codec_realtek,snd_pcm_oss,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss
    soundcore 5442 1 snd
    pcspkr 1899 0
    r8169 56839 0
    mii 4091 1 r8169
    nfs 127007 0
    lockd 64904 1 nfs
    sunrpc 186092 2 nfs,lockd
    fscache 40995 1 nfs
    ablk_helper 1972 0
    cryptd 8741 1 ablk_helper
    aes_x86_64 7508 6
    aes_generic 26138 1 aes_x86_64
    xts 3101 3
    gf128mul 6050 1 xts
    dm_crypt 15799 3
    dm_mod 72105 7 dm_crypt
    i915 495521 3
    video 11276 1 i915
    button 4662 1 i915
    i2c_algo_bit 5391 1 i915
    intel_agp 10744 1 i915
    intel_gtt 15659 3 i915,intel_agp
    drm_kms_helper 32877 1 i915
    drm 218852 4 i915,drm_kms_helper
    i2c_core 20707 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
    vfat 10119 0
    fat 48338 1 vfat
    xfs 748207 2
    ext4 440434 1
    crc16 1359 2 ext4,bluetooth
    jbd2 78751 1 ext4
    mbcache 5977 1 ext4
    uhci_hcd 23436 0
    ehci_hcd 41816 0
    sr_mod 14823 0
    usbcore 150398 6 uas,uhci_hcd,uvcvideo,ums_realtek,usb_storage,ehci_hcd
    usb_common 954 1 usbcore
    cdrom 35520 1 sr_mod
    sd_mod 29559 5
    ahci 21360 4
    libahci 20023 1 ahci
    libata 167683 2 ahci,libahci
    scsi_mod 133386 5 uas,usb_storage,libata,sd_mod,sr_mod
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
    20:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
    pacman -Q | grep ...
    alsa-lib 1.0.26-1
    alsa-plugins 1.0.26-1
    alsa-utils 1.0.26-1
    alsaplayer 0.99.81-5
    lib32-alsa-lib 1.0.26-1
    lib32-alsa-plugins 1.0.26-1
    lib32-libpulse 2.1-1
    lib32-libsndfile 1.0.25-2
    libcanberra-pulse 0.30-2
    libcdaudio 0.99.12-6
    libpulse 2.1-1
    libsndfile 1.0.25-2
    portaudio 19_20111121-1
    pulseaudio 2.1-1
    pulseaudio-alsa 2-1
    sound-juicer 3.5.0-1
    sound-theme-freedesktop 0.8-1
    soundtouch 1.6.0-1
    teamspeak-soundpack-portal 1-4
    webrtc-audio-processing 0.1-1
    pactl list
    Module #0
    Name: module-device-restore
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore the volume/mute state of devices"
    module.version = "2.1"
    Module #1
    Name: module-stream-restore
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore the volume/mute/device state of streams"
    module.version = "2.1"
    Module #2
    Name: module-card-restore
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore profile of cards"
    module.version = "2.1"
    Module #3
    Name: module-augment-properties
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Augment the property sets of streams with additional static information"
    module.version = "2.1"
    Module #4
    Name: module-udev-detect
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Detect available audio hardware and load matching drivers"
    module.version = "2.1"
    Module #5
    Name: module-jackdbus-detect
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "David Henningsson"
    module.descript

    I set the loglevel to debug and rebooted.
    grep -i pulse /var/log/everything.log
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    Dec 3 00:06:34 localhost rtkit-daemon[442]: Successfully made thread 713 of process 713 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: RealtimeKit worked.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: Successfully gained nice level -11.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: This is PulseAudio 2.1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Found 2 CPUs.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Page size is 4096 bytes
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compiled with Valgrind support: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in valgrind mode: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in VM: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Optimized build: yes
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in system mode: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes.tdb'
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes'.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes.tdb'
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes'.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database.tdb'
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database'.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-udev-detect.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: Found 1 cards.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-jackdbus-detect.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus f8aad50a9c72259e812fef8050bbed02 as :1.11
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #5; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-bluetooth-discover.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus aca7467032ad6386c1a812c250bbecf9 as :1.27
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #6; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-esound-protocol-unix.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #8; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-gconf.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-gconf" (index: #9; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.description = "Dummy Output"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.class = "abstract"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.icon_name = "audio-card"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.class = "monitor"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    Dec 3 01:06:35 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Thread starting up
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-null-sink" (index: #12; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-console-kit.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-systemd-login.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 0 "Login Session 1"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-systemd-login.c: Added new session 1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-dbus-protocol.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module20
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module21
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #22; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #23; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.PulseAudio1!
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.pulseaudio.Server!
    Dec 3 01:06:35 localhost pulseaudio[710]: [pulseaudio] main.c: Daemon startup successful.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Daemon startup complete.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module22
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module23
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client2
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/gnome-shell.desktop.
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client3
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for canberra-gtk-play
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 3 "canberra-gtk-play"
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client3
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    Dec 3 00:06:38 localhost rtkit-daemon[442]: Successfully made thread 745 of process 745 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: RealtimeKit worked.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: Successfully gained nice level -11.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: This is PulseAudio 2.1
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Found 2 CPUs.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Page size is 4096 bytes
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compiled with Valgrind support: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in valgrind mode: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in VM: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Optimized build: yes
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in system mode: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] pid.c: Daemon already running.
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client4
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-publish" (index: #24; argument: "display=:0").
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module24
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 4 "pactl"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client4
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 5 "Native client (UNIX socket client)"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client5
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-x11-xsmp.c: Connected to session manager 'gnome-session' as '102459fa9aeb823737135449319899169800000005480030'.
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 6 "XSMP Session on gnome-session as 102459fa9aeb823737135449319899169800000005480030"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-xsmp" (index: #25; argument: "display=:0 session_manager=local/whatever-laptop:@/tmp/.ICE-unix/548,unix/whatever-laptop:/tmp/.ICE-unix/548").
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client6
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module25
    Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 5 "pactl"
    Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
    Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client5
    Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
    Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
    Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] client.c: Created 7 "Native client (UNIX socket client)"
    Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client7
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0000, resuming
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 0 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream0
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 54188 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 0 "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 1 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream1
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 352800 bytes.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream1
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 1 "audio-volume-change"
    Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
    Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
    Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:08:28 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Synced.
    By now I also made my system not load any moudules which have oss in their name. Didn't help either.

  • Can't Start Pulseaudio

    Hi,
    I don't know why but I can't start pulseaudio or alsamixer. I used to be able to start them, but I forgot what I had to do to get them running. I was just using it as a simple volume control when I had it working.
    I've tried:
    [gulliver@myhost ~]$ pulseaudio --start
    E: [pulseaudio] main.c: Daemon startup failed.
    [gulliver@myhost ~]$ start-pulseaudio-x11
    E: [pulseaudio] main.c: Daemon startup failed.
    [gulliver@myhost ~]$ alsamixer
    ALSA lib pulse.c:229:(pulse_connect) PulseAudio: Unable to connect: Connection refused
    cannot open mixer: Connection refused
    [gulliver@myhost ~]$ pulseaudio
    E: [pulseaudio] main.c: Unknown command: (eg. when X is not active)
    E: [pulseaudio] main.c: Failed to initialize daemon.
    [gulliver@myhost ~]$
    Verbose isn't any different.
    In another thread I read somebody trying.  I got a pretty large output.
    [gulliver@myhost ~]$ pulseaudio --log-level=4 --log-target=stderr
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: RealtimeKit worked.
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 1.1
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
    D: [pulseaudio] main.c: Running on host: Linux x86_64 3.1.5-1-ARCH #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011
    D: [pulseaudio] main.c: Found 2 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: All asserts enabled.
    I: [pulseaudio] main.c: Machine ID is c1b3c15dc26d22642398743300001ac8.
    I: [pulseaudio] main.c: Session ID is c1b3c15dc26d22642398743300001ac8-1326592649.892198-2012670361.
    I: [pulseaudio] main.c: Using runtime directory /home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-runtime.
    I: [pulseaudio] main.c: Using state directory /home/gulliver/.pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-1.1/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-device-volumes.tdb'
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-stream-volumes.tdb'
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-stream-volumes'.
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-card-database.tdb'
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-udev-detect.so': success
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
    I: [pulseaudio] module-udev-detect.c: Found 1 cards.
    I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-jackdbus-detect.so': success
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-bluetooth-discover.so': success
    D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 7660e9b219ab55868191f04200000028 as :1.18609
    D: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
    D: [pulseaudio] bluetooth-util.c: Bluetooth daemon is apparently not available.
    I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #5; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-esound-protocol-unix.so': success
    I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #6; argument: "").
    I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #7; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-gconf.so': success
    I: [pulseaudio] module.c: Loaded "module-gconf" (index: #8; argument: "").
    I: [pulseaudio] module-default-device-restore.c: Saved default sink 'alsa_output.pci-0000_00_1b.0.analog-stereo' not existent, not restoring default sink setting.
    I: [pulseaudio] module-default-device-restore.c: Saved default source 'alsa_input.pci-0000_00_1b.0.analog-stereo' not existent, not restoring default source setting.
    I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #9; argument: "").
    I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #10; argument: "").
    D: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
    D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: sink:auto_null (probably pre-v1.0 data)
    D: [pulseaudio] module-device-restore.c: Attempting to load legacy (pre-v1.0) data for key: sink:auto_null
    D: [pulseaudio] module-device-restore.c: Size does not match.
    D: [pulseaudio] module-device-restore.c: Unable to load legacy (pre-v1.0) data for key: sink:auto_null. Ignoring.
    D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: sink:auto_null:null
    I: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: device.description = "Dummy Output"
    I: [pulseaudio] sink.c: device.class = "abstract"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card"
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: source:auto_null.monitor (probably pre-v1.0 data)
    D: [pulseaudio] module-device-restore.c: Attempting to load legacy (pre-v1.0) data for key: source:auto_null.monitor
    D: [pulseaudio] module-device-restore.c: Size does not match.
    D: [pulseaudio] module-device-restore.c: Unable to load legacy (pre-v1.0) data for key: source:auto_null.monitor. Ignoring.
    D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: source:auto_null.monitor:null
    I: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    D: [null-sink] module-null-sink.c: Thread starting up
    D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: sink:auto_null:null
    I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #11; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
    I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #12; argument: "").
    I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #13; argument: "").
    D: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-console-kit.so': success
    I: [pulseaudio] client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
    D: [pulseaudio] module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session1
    I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #15; argument: "").
    I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #16; argument: "").
    I: [pulseaudio] module.c: Loaded "module-cork-music-on-phone" (index: #17; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #18; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #19; argument: "").
    D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-dbus-protocol.so': success
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
    I: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #20; argument: "").
    I: [pulseaudio] module.c: Loaded "module-x11-bell" (index: #21; argument: "sample=bell-windowing-system").
    E: [pulseaudio] main.c: Unknown command: (eg. when X is not active)
    E: [pulseaudio] main.c: Failed to initialize daemon.
    I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
    I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 removed from object /org/pulseaudio/stream_restore1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry1
    I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #4).
    I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #4).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-bluetooth-discover" (index: #5).
    I: [pulseaudio] module.c: Unloaded "module-bluetooth-discover" (index: #5).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #6).
    I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #6).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #7).
    I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #7).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-gconf" (index: #8).
    I: [pulseaudio] module.c: Unloaded "module-gconf" (index: #8).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #9).
    I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #9).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #10).
    I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #10).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-null-sink" (index: #11).
    D: [pulseaudio] module-always-sink.c: Autoloaded null-sink removed
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device removed from object /org/pulseaudio/core1/sink0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink removed from object /org/pulseaudio/core1/sink0
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device removed from object /org/pulseaudio/core1/source0
    D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
    D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
    D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
    D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
    D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
    D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
    D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
    D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
    D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
    D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
    D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source removed from object /org/pulseaudio/core1/source0
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    D: [null-sink] module-null-sink.c: Thread shutting down
    I: [pulseaudio] module.c: Unloaded "module-null-sink" (index: #11).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #12).
    I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #12).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #13).
    I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #13).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #14).
    I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #14).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #15).
    D: [pulseaudio] module-console-kit.c: Removing session /org/freedesktop/ConsoleKit/Session1
    I: [pulseaudio] client.c: Freed 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #15).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #16).
    I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #16).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-cork-music-on-phone" (index: #17).
    I: [pulseaudio] module.c: Unloaded "module-cork-music-on-phone" (index: #17).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #18).
    I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #18).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #19).
    I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #19).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-dbus-protocol" (index: #20).
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 removed from object /org/pulseaudio/core1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module2
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module3
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module4
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module5
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module6
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module7
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module8
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module9
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module10
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module11
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module12
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module13
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module14
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module15
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module16
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module17
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module18
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module19
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats removed from object /org/pulseaudio/core1/memstats
    I: [pulseaudio] sink.c: Freeing sink 0 "auto_null"
    I: [pulseaudio] source.c: Freeing source 0 "auto_null.monitor"
    I: [pulseaudio] module.c: Unloaded "module-dbus-protocol" (index: #20).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] module.c: Unloading "module-x11-bell" (index: #21).
    I: [pulseaudio] module.c: Unloaded "module-x11-bell" (index: #21).
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
    I: [pulseaudio] main.c: Daemon terminated.
    I don't know how to decipher what it's telling me or how to fix it.

    The lines starting with E are your errors, which tell you what the (perceived from pulse) problem is.

  • PulseAudio daemon won't start

    Hi all.
    I installed PulseAudio under KDE, then uninstalled it when I ran into issues with Flash. Now I'm trying to reinstall it, but the daemon fails to start. I don't see the correct auto devices in KDE's Multimedia settings and when try to start it manually from the terminal, I see:
    [rob@arch ~]$ pulseaudio --start
    E: [pulseaudio] main.c: Daemon startup failed.
    If I run the same command with the -v flag instead of --start, I get lots of output that suggests everything is going OK, but then the process simply terminates with the message "Killed". Here's the full output. Any suggestions on how to troubleshoot further?
    [rob@arch ~]$ pulseaudio -v
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 2.0
    I: [pulseaudio] main.c: Page size is 4096 bytes
    I: [pulseaudio] main.c: Machine ID is 2211a7a4795aba5e764e384b000003d8.
    I: [pulseaudio] main.c: Session ID is 2211a7a4795aba5e764e384b000003d8-1340064191.411265-883444798.
    I: [pulseaudio] main.c: Using runtime directory /home/rob/.pulse/2211a7a4795aba5e764e384b000003d8-runtime.
    I: [pulseaudio] main.c: Using state directory /home/rob/.pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    W: [pulseaudio] pid.c: Stale PID file, overwriting.
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/rob/.pulse/2211a7a4795aba5e764e384b000003d8-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/rob/.pulse/2211a7a4795aba5e764e384b000003d8-stream-volumes'.
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/rob/.pulse/2211a7a4795aba5e764e384b000003d8-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] (alsa-lib)setup.c: Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] (alsa-lib)pcm_params.c: Slave PCM not usable
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround71:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround71:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround71:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround71:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:0: Invalid argument
    I: [pulseaudio] (alsa-lib)setup.c: Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: [pulseaudio] (alsa-lib)setup.c: Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: [pulseaudio] (alsa-lib)setup.c: Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: [pulseaudio] (alsa-lib)setup.c: Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:0: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,1
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,1
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,1
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,1
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,1
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,1
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,1
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,1
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,1: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,2
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,2
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,2
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,2
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,2
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,2
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,2
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,2
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,2: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,3
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,3
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,3
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,3
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,3
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,3
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,3
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Invalid argument
    I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 0,3
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:0,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:0,3: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    I: [pulseaudio] (alsa-lib)setup.c: Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_00_05.0"
    N: [pulseaudio] alsa-util.c: Disabling timer-based scheduling because running inside a VM.
    I: [pulseaudio] alsa-sink.c: Successfully opened device front:0.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_00_05.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "Intel 82801AA-ICH"
    I: [pulseaudio] sink.c: alsa.id = "Intel ICH"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "0"
    I: [pulseaudio] sink.c: alsa.card = "0"
    I: [pulseaudio] sink.c: alsa.card_name = "Intel 82801AA-ICH"
    I: [pulseaudio] sink.c: alsa.long_card_name = "Intel 82801AA-ICH with STAC9700,83,84 at irq 5"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_intel8x0"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:00:05.0"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "8086"
    I: [pulseaudio] sink.c: device.vendor.name = "Intel Corporation"
    I: [pulseaudio] sink.c: device.product.name = "82801AA AC'97 Audio Controller"
    I: [pulseaudio] sink.c: device.form_factor = "internal"
    I: [pulseaudio] sink.c: device.string = "front:0"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "17632"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "4408"
    I: [pulseaudio] sink.c: device.access_mode = "mmap"
    I: [pulseaudio] sink.c: device.profile.name = "analog-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Analog Stereo"
    I: [pulseaudio] sink.c: device.description = "Built-in Audio Analog Stereo"
    I: [pulseaudio] sink.c: alsa.mixer_name = "SigmaTel STAC9700,83,84"
    I: [pulseaudio] sink.c: alsa.components = "AC97a:83847600"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_00_05.0.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of Built-in Audio Analog Stereo"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "0"
    I: [pulseaudio] source.c: alsa.card_name = "Intel 82801AA-ICH"
    I: [pulseaudio] source.c: alsa.long_card_name = "Intel 82801AA-ICH with STAC9700,83,84 at irq 5"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_intel8x0"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:05.0"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "8086"
    I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
    I: [pulseaudio] source.c: device.product.name = "82801AA AC'97 Audio Controller"
    I: [pulseaudio] source.c: device.form_factor = "internal"
    I: [pulseaudio] source.c: device.string = "0"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 4.0 fragments of size 4408 bytes (24.99ms), buffer size is 17632 bytes (99.95ms)
    I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume.
    I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -129.00 dB to 12.00 dB.
    I: [pulseaudio] alsa-sink.c: Fixing base volume to -12.00 dB
    I: [pulseaudio] alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
    I: [pulseaudio] alsa-sink.c: Using hardware mute control.
    I: [alsa-sink] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink] alsa-sink.c: Starting playback.
    N: [pulseaudio] alsa-util.c: Disabling timer-based scheduling because running inside a VM.
    I: [pulseaudio] alsa-source.c: Successfully opened device front:0.
    I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
    I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    I: [pulseaudio] source.c: Created source 1 "alsa_input.pci-0000_00_05.0.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: alsa.resolution_bits = "16"
    I: [pulseaudio] source.c: device.api = "alsa"
    I: [pulseaudio] source.c: device.class = "sound"
    I: [pulseaudio] source.c: alsa.class = "generic"
    I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] source.c: alsa.name = "Intel 82801AA-ICH"
    I: [pulseaudio] source.c: alsa.id = "Intel ICH"
    I: [pulseaudio] source.c: alsa.subdevice = "0"
    I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] source.c: alsa.device = "0"
    I: [pulseaudio] source.c: alsa.card = "0"
    I: [pulseaudio] source.c: alsa.card_name = "Intel 82801AA-ICH"
    I: [pulseaudio] source.c: alsa.long_card_name = "Intel 82801AA-ICH with STAC9700,83,84 at irq 5"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_intel8x0"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:05.0"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:05.0/sound/card0"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "8086"
    I: [pulseaudio] source.c: device.vendor.name = "Intel Corporation"
    I: [pulseaudio] source.c: device.product.name = "82801AA AC'97 Audio Controller"
    I: [pulseaudio] source.c: device.form_factor = "internal"
    I: [pulseaudio] source.c: device.string = "front:0"
    I: [pulseaudio] source.c: device.buffering.buffer_size = "17632"
    I: [pulseaudio] source.c: device.buffering.fragment_size = "4408"
    I: [pulseaudio] source.c: device.access_mode = "mmap"
    I: [pulseaudio] source.c: device.profile.name = "analog-stereo"
    I: [pulseaudio] source.c: device.profile.description = "Analog Stereo"
    I: [pulseaudio] source.c: device.description = "Built-in Audio Analog Stereo"
    I: [pulseaudio] source.c: alsa.mixer_name = "SigmaTel STAC9700,83,84"
    I: [pulseaudio] source.c: alsa.components = "AC97a:83847600"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-source.c: Using 4.0 fragments of size 4408 bytes (24.99ms), buffer size is 17632 bytes (99.95ms)
    I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
    I: [pulseaudio] alsa-source.c: Hardware volume ranges from 0.00 dB to 22.50 dB.
    I: [pulseaudio] alsa-source.c: Fixing base volume to -22.50 dB
    I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
    I: [pulseaudio] alsa-source.c: Using hardware mute control.
    I: [alsa-source] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-source] alsa-source.c: Starting capture.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="0" name="pci-0000_00_05.0" card_name="alsa_card.pci-0000_00_05.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:05.0/sound/card0 (alsa_card.pci-0000_00_05.0) module loaded.
    I: [pulseaudio] module-udev-detect.c: Found 1 cards.
    I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
    I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #6; argument: "").
    I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #7; argument: "").
    I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: "").
    I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
    W: [pulseaudio] module.c: module-combine is deprecated: Please use module-combine-sink instead of module-combine!
    W: [pulseaudio] module-combine.c: We will now load module-combine-sink. Please make sure to remove module-combine from your configuration.
    I: [pulseaudio] sink.c: Created sink 1 "combined" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: device.class = "filter"
    I: [pulseaudio] sink.c: device.description = "Simultaneous Output"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card"
    I: [pulseaudio] source.c: Created source 2 "combined.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of Simultaneous Output"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    I: [combine] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 6.
    Killed

    Normally you don't have to start pulseaudio manually when using kde, just relogin after installing and kde should start the pulse daemon, check with
    ps aux |grep pulse
    otherwise start the daemon with
    start-pulseaudio-kde
    but again this should not be necessary.

  • Pulseaudio no sound

    Followed the wiki and started daemon, used the fuser commands to check that nothing was using sound first and restarted daemon after closing all apps but no sound.
    Here is my /etc/asound.conf:
    # Use Pulseaudio by default
    pcm.pulse {
    type pulse
    ctl.pulse {
    type pulse
    # 6 channel dmix:
    pcm.dmix6 {
    type dmix
    ipc_key 1024
    ipc_key_add_uid false
    ipc_perm 0666
    slave {
    pcm "hw:0,0"
    rate 48000
    format "S32_LE"
    channels 6
    period_time 0
    period_size 1024
    buffer_time 0
    buffer_size 8192
    # upmixing:
    pcm.ch51dup {
    type route
    slave.pcm dmix6
    slave.channels 6
    ttable.0.0 1
    ttable.1.1 1
    ttable.0.2 0.6
    ttable.1.3 0.6
    ttable.0.4 0.5
    ttable.1.4 0.5
    ttable.0.5 0.5
    ttable.1.5 0.5
    pcm.duplex {
    type asym
    playback.pcm "ch51dup" # upmix first
    capture.pcm "hw:0"
    # change default device:
    #pcm.!default {
    # type plug
    # slave {
    # pcm "duplex"
    # for aoss
    pcm.dsp "duplex"
    pcm.dsp1 "duplex"
    pcm.10to20 {
    type route
    slave.pcm default
    slave.channels 2
    ttable.0.0 1
    ttable.0.1 1
    pcm.headset {
    type bluetooth
    profile "voice"
    ctl.headset {
    type bluetooth
    profile "voice"
    ctl.equal {
    type equal;
    #pcm.plugequal {
    # type equal;
    # Modify the line below if you don't
    # want to use sound card 0.
    #slave.pcm "plughw:0,0";
    #by default we want to play from more sources at time:
    # slave.pcm "plug:dmix6";
    #pcm.equal {
    # Or if you want the equalizer to be your
    # default soundcard uncomment the following
    # line and comment the above line.
    #pcm.!default {
    # type plug;
    # slave.pcm plugequal;
    #------------------------end of working file
    So my setup works like this: I use plug:dmix6 for anything that is 5.1, while default upmixes stereo to all speakers for anything else (music, 2channel video, youtube, etc.). It all works great and has for a long time, but now I started using XBMC and I need to be able to switch between using dmix6 for movies/shows, and default for Music.
    I have tried various video/audio files with mplayer using -ao alsa:device=pulse but get no sound.
    Here is end of /var/log/messages.log if it helps:
    Jan 18 14:51:30 localhost pulseaudio[7793]: sink-input.c: application.language = "C"
    Jan 18 14:51:30 localhost pulseaudio[7793]: sink-input.c: window.x11.display = ":0"
    Jan 18 14:51:30 localhost pulseaudio[7793]: sink-input.c: application.process.machine_id = "f4cc2664f136cd7500a22d7d00000367"
    Jan 18 14:51:30 localhost pulseaudio[7793]: sink-input.c: application.process.session_id = "f4cc2664f136cd7500a22d7d00000367-1295238838.187447-631589587"
    Jan 18 14:51:30 localhost pulseaudio[7793]: sink-input.c: module-stream-restore.id = "sink-input-by-application-name:ALSA plug-in [mplayer]"
    Jan 18 14:51:30 localhost pulseaudio[7793]: protocol-native.c: Requested tlength=500.00 ms, minreq=31.25 ms
    Jan 18 14:51:30 localhost pulseaudio[7793]: protocol-native.c: Final latency 531.25 ms = 437.50 ms + 2*31.25 ms + 31.25 ms
    Jan 18 14:51:36 localhost pulseaudio[7793]: sap.c: sendmsg() failed: Connection refused
    Jan 18 14:51:39 localhost pulseaudio[7793]: module-device-restore.c: Storing volume/mute/port for device sink:alsa_output.pci-0000_05_01.0.analog-surround-51.
    Jan 18 14:51:39 localhost pulseaudio[7793]: module-device-restore.c: Storing volume/mute/port for device sink:alsa_output.pci-0000_05_01.0.analog-surround-51.
    Jan 18 14:51:39 localhost pulseaudio[7793]: module-device-restore.c: Storing volume/mute/port for device sink:alsa_output.pci-0000_05_01.0.analog-surround-51.
    Jan 18 14:51:39 localhost pulseaudio[7793]: module-device-restore.c: Storing volume/mute/port for device sink:alsa_output.pci-0000_05_01.0.analog-surround-51.
    Jan 18 14:51:40 localhost pulseaudio[7793]: module-device-restore.c: Storing volume/mute/port for device sink:alsa_output.pci-0000_05_01.0.analog-surround-51.
    Jan 18 14:51:40 localhost pulseaudio[7793]: module-device-restore.c: Storing volume/mute/port for device sink:alsa_output.pci-0000_05_01.0.analog-surround-51.
    Jan 18 14:51:40 localhost pulseaudio[7793]: module-device-restore.c: Storing volume/mute/port for device sink:alsa_output.pci-0000_05_01.0.analog-surround-51.
    Jan 18 14:51:40 localhost pulseaudio[7793]: module-device-restore.c: Storing volume/mute/port for device sink:alsa_output.pci-0000_05_01.0.analog-surround-51.
    Jan 18 14:51:41 localhost pulseaudio[7793]: sink-input.c: Freeing input 23 "ALSA Playback"
    Jan 18 14:51:41 localhost pulseaudio[7793]: client.c: Freed 12 "ALSA plug-in [mplayer]"
    Jan 18 14:51:41 localhost pulseaudio[7793]: protocol-native.c: Connection died.
    Jan 18 14:51:46 localhost pulseaudio[7793]: sap.c: sendmsg() failed: Connection refused
    Jan 18 14:51:46 localhost pulseaudio[7793]: module-suspend-on-idle.c: Sink rtp idle for too long, suspending ...
    Jan 18 14:51:49 localhost pulseaudio[7793]: module-device-restore.c: Synced.
    Jan 18 14:51:56 localhost pulseaudio[7793]: sap.c: sendmsg() failed: Connection refused
    Jan 18 14:51:56 localhost pulseaudio[7793]: client.c: Created 13 "Native client (UNIX socket client)"
    Jan 18 14:51:56 localhost pulseaudio[7793]: protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Jan 18 14:51:56 localhost pulseaudio[7793]: client.c: Freed 13 "ALSA plug-in [amixer]"
    Jan 18 14:51:56 localhost pulseaudio[7793]: protocol-native.c: Connection died.
    Jan 18 14:52:06 localhost pulseaudio[7793]: sap.c: sendmsg() failed: Connection refused
    Jan 18 14:52:16 localhost pulseaudio[7793]: sap.c: sendmsg() failed: Connection refused
    Jan 18 14:52:26 localhost pulseaudio[7793]: sap.c: sendmsg() failed: Connection refused
    Thanks for any help!
    Last edited by colbert (2011-01-18 19:58:42)

    Well; complete the circle and mark your thread as solved so people don't need to click to find out you fixed it

  • [SOLVED] No sound from JACK

    I recently set up jack2-dbus, and I haven't been able to get any sound output. Looking at qjackctl's connection's interface sheds some light on the issue. It looks like system is not a writable client. As of now, running any program which uses jack sends output to the PulseAudio Jack Source, which doesn't seem to be playing any audio. Is pulseaudio at fault here?
    Last edited by AnimatedRNG (2015-02-04 01:11:12)

    Strange. I just restarted my computer today and now everything is working. The system entry appears in qjackctl's connections menu. Not sure what I did to fix it, but it seems like everything is in order.

  • Why does Firefox performance slow down after starting Jack server?

    Hello,
    I started configuring my audio on my system. So, I want to have jack working (not jack2, to work with wineasio) with best sound quality with all sound routed through jack. When i start jack server with this command and settings:
    killall jackd;killall pulseaudio;jackd -R -t 1000 -d alsa -P hw:0,0 -r 48000 -n2 -D
    Firefox slows down, opens new pages slow and the scroll down is very very slow. I had this issue with other distros too. I suspect that it has to do with realtime ( which i need for my audio related apps like traktor through wine, ardour, ableton through wine etc) without being sure about it. Any idea why this is happening?

    zabrielza wrote:I had this issue with other distros too.
    This smells like hardware problem. Do this:
    1. Kill pulseaudio, jack, and make sure they are killed
    2. Make sure you do not renice anything or apply other such tweaks
    3. Run jackd -d alsa
    4. Use your system
    5. If unsatisfactory, try jackd -d alsa -p 1024 -n 3
    6. Use your system
    Jack runs with realtime priority by default (no flag required), and we still use the audio group to provide that privilege. I also do not advocate the realtime kernel, but you may try it. Jack not functioning well (i.e. hampering other tasks significantly) on a standard kernel is cause for concern.
    You can read/grep your dmesg and systemd journal for suspicious messages. You may try running real-time audio tasks in another operating system with your hardware, and upon success may proceed to debug the problem on Linux, possibly with the help of the alsa developers.
    Or better yet, grab a supported semi-pro external audio device if jack is important for you. However, this may not help if the problem is somewhere deeper, e.g. at the hardware interrupt level.
    Last edited by schivmeister (2015-04-30 18:21:56)

  • Teamspeak 3 and PulseAudio with ALSA, not working

    Hello!
    When I run Teamspeak 3 and connect to a server, alternatively try "Play Test Sound" in Playback section of settings, it automatically stops sound output from both MPD and MPV.
    However, when I run only MPD and MPV I can lower/higher volume & mute without it effecting eachother, this brings me to a (maybe false?) conclusion that PulseAudio is working. Only not with Ts3.
    In Teamspeak I've adjusted the Playback Mode to PulseAudio and have Playback Device put to Default.
    #/etc/asound.conf
    # Use PulseAudio by default
    pcm.!default {
    type pulse
    fallback "sysdefault"
    hint {
    show on
    description "Default ALSA Output (currently PulseAudio Sound Server)"
    ctl.!default {
    type pulse
    fallback "sysdefault"
    #.config/mpd/mpd.conf
    # Required files
    db_file "~/.config/mpd/database"
    log_file "~/.config/mpd/log"
    # Optional
    music_directory "~/music"
    playlist_directory "~/.config/mpd/playlists"
    pid_file "~/.config/mpd/pid"
    state_file "~/.config/mpd/state"
    sticker_file "~/.config/mpd/sticker.sql"
    restore_paused "yes"
    audio_output {
    type "pulse"
    name "MPD PulseAudio Output"
    # sink "your-sink-name-here"
    #.mpv/mpv.conf
    # Write your default config options here!
    # default configuration that applies to every file
    [default]
    # try to use high quality opengl output, with standard opengl, classic xv, and wayland as fallbacks
    # note: opengl has numerous quality/performance trade-off options.
    # as per the mpv(1), "opengl-hq" is just an alias for "opengl:lscale=lanczos2:dither-depth=auto:fbo-format=rgb16"
    vo=opengl-hq,opengl,xv,wayland
    # use alsa for audio output, choose pulse, or oss4 as fallback
    ao=pulse
    # prefer using 5.1 channels audio (defaults to 2 - see mpv --channels=help)
    # mixing is handled by libavcodec unless using "--af-add=pan" (see below)
    channels=5.1
    # scale the subtitles to the 3% of the screen size
    sub-scale=3
    # set the window title using the media filename (see Property Expansion section of mpv(1))
    title="${filename}"
    # add black borders so the movies have the same aspect ratio of the monitor
    # for wide screen monitors
    vf=expand=::::1:16/9:16
    # for non wide screen traditional monitors, alternative to the above item
    #vf=expand=::::1:4/3:16
    # disable screensaver
    stop-screensaver="yes"
    # execute a command every 30 seconds
    # useful to disable a non-standard-compliant screensavers and to work around buggy behaviours
    # BE WARNED: to avoid dangerous commands is your responsibility
    #heartbeat-cmd="xscreensaver-command -deactivate &" # stop xscreensaver
    # custom heartbeat frequency in seconds
    #heartbeat-interval=600
    # correct pitch when speed is faster or slower than 1.0
    af=scaletempo
    # allow to seek in a file which is still downloading whilst watching it
    # from manpage:"this switch has no effect in the typical case" (usually done automatically by demuxers)
    # idx=yes
    # allow to increase the maximal volume to 600%
    #softvol-max=600
    # skip displaying some frames to maintain A/V sync on slow systems
    framedrop=yes
    # profile for up-mixing two channels audio to six channels
    # use --profile 2chto6ch to activate
    [2chto6ch]
    af-add=pan=6:1:0:.4:0:.6:2:0:1:0:.4:.6:2
    # profile to down-mixing six channels audio to two channels
    # use --profile 6chto2ch to activate
    [6chto2ch]
    af-add=pan=2:0.7:0:0:0.7:0.5:0:0:0.5:0.6:0.6:0:0
    Sooo, someone has a clue to whats up?
    Last edited by redot (2014-02-12 16:37:21)

    Hi,
    Did you use Group Policy to map drive or map drive manually? Can you access the network share? Please check if the user have share permission on the network share.
    Best practices for basic NTFS permissions on a share
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/c6242159-d15d-417e-91f8-eb19c0da3a35/best-practices-for-basic-ntfs-permissions-on-a-share
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

Maybe you are looking for