No "purchased by" or "account name" in Get Info display

The first song I purchased from the iTunes
store works fine. When I use "Get Info" to
see the details there appears to be corrent
information for the "Purchased By" and "Account
Name" fields.
Every other song I have purchased since then
does not display anything for "Purchased By"
or "Account Name" in the "Get Info" display.
The header appears to be missing or corrupt
in all of these files. None of them will play
when I click them and press play, I get no
error or sign in prompt, nothing...
I have about had it with the lack of response
I'm gotten from my emails to tech. support.
After 3 days I got a message that said I should
look for the files on the hard disk. Its clear
that they did not read my email and they have
not replied since, that was about 3 days ago...

Hi ailurous,
I run repair permissions all the time without first booting from the install disk. It works fine. On the other hand, attempting to Repair Disk without booting from the install disk will not work.
I'm thinking something other than faulty permissions is causing your problems..
That being said, I'd suggest booting off your install disk, running Disk Utility, and selecting First Aid>Repair Disk.
If it says that it couldn't repair the disk, just keep running it until it gives you the Disk Successfully Repaired message.
Let us know if this helps or if you get some error messages.
Bob

Similar Messages

Data being Displayed while the Account Name not getting Displayed in FR

Hi,
We are facing a strange issue when is user is trying to run a Hyperion Financial report. The data and Entity Name is being displayed whereas the Account name is not being displayed for a particular entity. The user has access to the Entity and accounts. Any Clues ??
Thanks,
Addy
Edited by: Addy on Jan 11, 2011 5:15 PM

The first thing that pops to my mind is does the format of the cell have Replace checkbox checked with a blank description. thus any results coming back will display as blank.
Also the customized header is check and it is showing blank.
A quick test if you have Smart View is can the user access the same data? if yes then the report has a filter of some sort, if the user cannot access the data in smart view, there is a security problem perhaps with the data
JTS

Locked out - permissions problem - List Fetching instead of my name under Get Info

locked out - permissions problem - List Fetching instead of my name under Get Info - can nott unlock files and some apps

For 10.7, hold down Command R at Startup and you get recovery Mode Utilities.
Choose Disk Utility. Select your Hard drive. Check the SMART Status for "Verified. Select the Boot Volume, by default it is "Macintosh HD".Run REPAIR disk. If it completes without incident, run Repair Permissions as well.
You can also hold down Option at Startup, and Choose Recovery HD as the boot device. It gets you to the same place in Utilities.

When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator and (me)".

When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator" and my_name(me)". Also, when I do a disk permission repair, it always repairs the same applications and files. Last night, I did a disk permission repair twice and both times it took a long time and did the exact same repair both times.

Disk Utility won't repair your home folder. Sounds like your home folder permissions are messed up tho. Try repairing them this way by using Lion Recovery.
1. Restart Lion, and before you hear the chime, hold down the Command and R keys.
2. You’ll be at the Repair Utilities screen. Click the Utilities item in the Menu Bar, then click Terminal.
3. In the Terminal window, type resetpassword and hit Return.
4. The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
5. At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
The reset process takes just a couple of minutes. When it’s done, exit the programs you’ve opened and restart your Mac.
Good luck
RM

Can I change where on the screen the "get info" display pops up?

Can I change where on the screen the "get info" display pops up? I have dual 23" cinema displays and the Get Info box always pops up inconveniently on the far, far left. Is there a way to change the default location, more towards the middle, where it would fit better into my work flow?

treetopstudio,
I'm not sure to change the default of Get Info but what you could do is open the Inspector instead it 1 remembers it location when you close it and 2 when you click on another icon in finder changes to that. To open it instead of the get info window Option + Command + i or hold Option and click File show Inspector.
Hope that helps,
Weston

I can no longer see my account name, but get a Guest user account, I can no longer see my account name, but get a Guest user account

I can no longer see my account name so I can gain access to my information, but now all I get is a Guest user account and it won't let me log into that account. All it lests me do is re-start the computer and use it in restricted mode. Can someone please help me!

Recommendation for your consideration
Hopefully your original user account was an "administrator". I have two admin accts in case one admin. acct gets "trashed.
Lets see what other forum members offer: my solution requires use of terminal and works. CLI (Command Line Interface) might be intimidating for you but we'll see what others possibly offer.
As I say the solution I have works well and will allow you to create new user(s) replacing your former users whatever type they were. I promise to check back today if no solution to you is offered...
Let 'er rip and...
cheers

Regarding FMS query to get the account name and get it in the report

Dear all,
I have created a FMS query to pick the G/L account name in the payment voucher,But the name which i got through the FMS in an UDF is not coming properly.It comes only if am manually entering Shift+F2 in that field.
Pls give me a suggestion for that.
The FMS query is.
SELECT T1.[AcctName] FROM VPM1 T0 INNER JOIN OACT T1 ON T0.CheckAct = T1.AcctCode INNER JOIN OVPM T2 ON T0.DocNum = T2.DocEntry WHERE T2.[DocNum] = $[ovpm.docnum]

hi,
try this:
SELECT T0.AcctName FROM OACT T0 WHERE T0.AcctCode=$[VPM1.CheckAct]
Thanks,
Neetu

Disk Utility Accident & Weird Symbol In Owner Name In Get Info

Recently, I was trying to troubleshoot some error messages I was getting with Carbon Copy Cloner, the source of which revolved around a mysterious file in my Shared folder. This file wouldn't delete no matter what I tried, so while searching for answers I heard that repairing permissions might help. Well, I forgot to read the message at the top of Disk Utility when I opened it. You know, the one that tells you that Disk Utility cannot repair permissions on a disk with open files or an on your current startup disk. Well, I ran disk utility without booting from the OS X install disk first. That probably explains why it made a bunch of changes to permissions.
Well, as I was about to close Disk Utility, I realized what I'd done, and I figured that it was no big deal. All I had to do was boot from the install disk and then run Disk Utility again, and it would repair the permissions the correct way. At least, that's what I thought. Then, when I did so, Disk Utility didn't make near as many changes as it did the first time. And, because I didn't realize until too late that I might need the output from the first time I ran Disk Utility in case something went wrong (i.e. I needed to undo any of the changes it made) I didn't even try to save it, if that is even possible.
Of course, this all didn't seem so bad. I thought that maybe the reason Disk Utility didn't make so many changes the second time was because some of the changes it made the first time really did need to be made, and thus that's why they weren't undone when I ran it again. However, I knew some thing was wrong when I tried to get info on a random file on my desktop just to verify that the owner was correct and everything. As soon as I either clicked or hovered over get info, I got the little rainbow spinning wheel for a second or two, which never happened before. Then, when I clicked the Ownership and Permissions triangle in the Get Info panel, I noticed something amiss. In the slot where the file's owner was supposed to be displayed, which should read "myusername(me)" the slot instead displayed some east asian character where my username should have been. So far, that, and a longer delay for the Get Info panel's appearance are my only symptoms, but I'm worried there may be further reaching repercussions to my system that I haven't discovered yet.
So, I guess what I'm asking is, based on my symptoms, can someone figure out what they think is wrong, and then possibly help me fix it. I don't know technical terms, but is it a corruption in the file that holds all the names of the users on my system? Is there a cache or preference file somewhere I can trash or edit to fix this. Or can I run fsck to fix this? Or, if it is a corrupted file like that I may have copy of it. I didn't mention it above, but Carbon Copy Cloner did manage to clone pretty much all of the folders on my hard drive in alphabetical order on an external firewire drive except for a few of the last few hidden folders and my Users folder.
Anyway, thanks in advance to everyone who takes the time to read this post.

Hi ailurous,
I run repair permissions all the time without first booting from the install disk. It works fine. On the other hand, attempting to Repair Disk without booting from the install disk will not work.
I'm thinking something other than faulty permissions is causing your problems..
That being said, I'd suggest booting off your install disk, running Disk Utility, and selecting First Aid>Repair Disk.
If it says that it couldn't repair the disk, just keep running it until it gives you the Disk Successfully Repaired message.
Let us know if this helps or if you get some error messages.
Bob

Changing File Names in "Get Info"

Every time I add a few songs to iTunes i shows up as track "and then the number" is there any way in finder to change this permanently? I know that it is blocked under "get info" and then "more info" tab. I know that you can change this in itunes but if u delete your librabry and re-ad the song its gonna show up as a track "and then the number" again.
Anybody know how to do this? and if you need an app what is the app that you need?

bojan1987 wrote:
where can i get the id3 editor?
Try
http://id3-editor.en.softonic.com/mac
or if you don't want to pay
http://dukko.en.softonic.com/mac
Cheers
Pete

"Get Info" displaying wrong file size

Hey Guys take a look at the image to see my issue
get info shows two different file sizes but then when i send the file or upload it to a server it shows the real file size
anyone see this before?

Hiya.
When I attach the image to an new empty email, before I send it I do not see any "Image Size popup at the bottom right corner of the window." The only size info I can see is the "Message Size" on the bottom left hand side. On the bottom right hand side there is Image Size with a drop down menu where you can choose to view the image either by "Actual Size"(default), Small, Medium or Large.
I am only able to see the attachment size info above the image after I have sent it when I go into Sent Messages or after I have sent it to myself I can see it in the received message.
Can you tell me where to hover the cursor to get this "Image Size popup"?
I am using Mail - Version 4.2 to send the message.
Thanks again Thomas.

Changing Artist/Genre/Song Name in "Get Info"

I am very maticulous about my music organization, and only maybe half the time am I able to change the Genre/Song Name/Or Artist
anyone else have this problem?
how do I fix it ?

If iTunes won't accept changes to the tags see Repair security permissions for iTunes for Windows.
If iTunes appears to accept your changes but the original values reappear later then the files are likely to be mp3s with multiple tags. In such cases iTunes only updates one of them and may later read back the unchanged data from the other. To fix this select the tracks in question in iTunes, right-click and use Convert > ID3 Tags > None, several times, then use Convert > ID3 Tags > ID3v2.3. You will need to reinsert any embedded artwork.
tt2

Adding ichat account names

ever since updating to latest snow leopard, ive had an issue in ichat when adding a name. used to be when i hit the "+" button on ichat, a window would appear where i can enter someone's name. if i had them in my address book and an IM account name was also in my address book, their account name would show in the "account name" box. now it displays a phone number and i have to open address book and cut and paste it in. any others share this problem?

Hi,
Welcome to the  Discussions
I am busy sorting out my Time Machine Backup drive at the moment for my OS 10.6.4 computer.
My Address Book does not have Address/Contact cards for people who I only have Screen Names for.
I can Add a entry by adding a character to the iChat Info Card > Address Card tab
(I list [email protected] as just a Screen Name - I added just an A as "First Name") Info card is brought up by highlighting a Buddy then the CMD key and i key together.
If I then removed the letter "a" in iChat (info card) the Screen Name as Name then remains in the Address Book.
Adding a Buddy normally presumes they are not in the Address Book and "Asks" for First Name, Last Name.
However it can be linked to an existing Address Book entry by clicking the blue half arrow at the end of the Last Name line (opens a slide out to the Address Book and asks to "Pick a Card")
If you add a Buddy with an Open Chat from either the Buddies menu or the keystrokes (I have not done it with the + Button) then the Screen Name is pre-filled in the slide out (that you call window).
In the Buddies Menu the Add option changes to add in the Buddies Screen Name (the Slide Out is the same otherwise).
ICQ which has been owned by AOL for a long time still uses numbers as IDs
The Screen Name/ID is then added as that number.
In the States you can also do SMS but I can't here.
I forget which type has to have a + sign in front.
Hopefully this will provide you with some clues.
11:19 PM Thursday; September 9, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Icon Shown On Top-Left Of Get Info

Believe me, I've searched for an answer.
Take to jpeg photos. Use 'Get Info' for both. One shows the actual photo on the top-left, the other one shows a 'Preview' icon. Why the difference? What do I need to do, to have the actual photo shown?

After spending a couple of hours of looking at various photos for some reason for this discrepancy, I've noticed that if the photo's icon does not have the white border around it, I'll have the same photo showing at the top of the Get Info display. If it does have the white border around it or the icon is not showing the actual photo, but the generic icon, the same generic icon is at the top of the Get Info display.
I also have a collection of icons of photos that have a black border around them. They also show the actual photo at the top of the Get Info display.
The white border around the icon, appears to be the problem. If it has no border or if the border is black, everything is copacetic.

TS3297 why I can't make a purchase on other itunes store I always get a message that "this account name can only make a purchase from the Qatari store" when I tried to change the store since the product is not available or only available in USA or Philipp

why I can't make a purchase on other itunes store I always get a message that "this account name can only make a purchase from the Qatari store" when I tried to change the store since the product is not available or only available in USA or Philippines

just call them...i bought my PB when it came out...but I had an issue recently and called them up and they helped me out....
Sorry can't help you with any of the other problems...mine are working fine...

I am attempting to burn a disk and get the message to authorize my laptop. I have done this. Can I update my account name on purchased media?

I am attempting to burn a disk and get the message to authorize my laptop. I have done this. Can I update my account name on purchased media?

You might be using an invalid email address that you are sending to or your mail settings for the account are wrong. Check the address and I would delete the email account and reenter it

No "purchased by" or "account name" in Get Info display

Similar Messages

Maybe you are looking for