No PXA storage space available at the moment.
Dear All,
When I am doing delivery or Reverse the delivery (T.Codes VL09, VL01N), in Client 800, it is going to ABAP dump. Please see below. Please help me in this.
Runtime Errors PXA_NO_FREE_SPACE
Date and Time 22.11.2011 19:44:13
Short dump has not been completely stored (too big)
Short text
No PXA storage space available at the moment.
What happened?
The current ABAP/4 program had to be terminated because there
was no space available to load it.
Each ABAP/4 program to be executed is stored in a central
storage area that is divided between all users.
This area was too small to hold all currently active programs for all
users.
Resource bottleneck
The current program "SAPLMCB1" had to be terminated because
a capacity limit has been reached.
Error analysis
Unable to load a program of 1169408 bytes.
The PXA ('program execution area') was too small to hold all
currently active programs for all users.
At present, the size of the PXA is set at 144868 Kbytes.
The largest contiguous and unlocked memory chunk has 592896 bytes.
Trigger Location of Runtime Error
Program SAPLMCB1
Include LMCB1F20
Row 200
Module type (FORM)
Module Name LIS_VERBUCHUNG
Source Code Extract
Line SourceCde
170 xmcbest = xmcbest.
171 ENDIF.
172 IF flg_v2 NE space.
173 * V2-Verbuchung starten
174 CALL FUNCTION 'MCB_STATISTICS_UPD_V2' IN UPDATE TASK
175 EXPORTING
176 zeitp = con_zeitp
177 TABLES
178 xmcmseg = xmcmseg
179 xmcbest = xmcbest.
180
181 ENDIF.
182 IF flg_b NE space.
183 * V3-Verbuchung starten
184 CALL FUNCTION 'MCB_STATISTICS_UPD_V3' IN UPDATE TASK
185 EXPORTING
186 zeitp = con_zeitp
187 TABLES
188 xmcmseg = xmcmseg
189 xmcbest = xmcbest.
190
191 ENDIF.
192 IF flg_bw NE space.
193 SET EXTENDED CHECK OFF.
194 * Preparation for new update process (plug-in system).
195 * See note 486784.
196 DATA if_release TYPE i. "interface release
197 if_release = 1.
198 PERFORM mcex_if_release_03 IN PROGRAM saplmcex CHANGING if_release
199 IF FOUND.
>>>>> IF if_release >= 2.
201 CALL FUNCTION 'MCEX_UPDATE_CALL_03'
202 EXPORTING
203 zeitp = con_zeitp
204 contr = hlp_control
205 i_update_task = 'X'
206 TABLES
207 xmcbest = xmcbest
208 xmcmseg = xmcmseg.
209 ELSE.
210 CALL FUNCTION 'MCEX_UPDATE_03' IN UPDATE TASK
211 EXPORTING
212 zeitp = con_zeitp
213 contr = hlp_control
214 TABLES
215 xmcbest = xmcbest
216 xmcmseg = xmcmseg.
217 ENDIF.
218 SET EXTENDED CHECK ON.
219 ENDIF.
Regards,
Rao.
Hi,
For error
Runtime Errors PXA_NO_FREE_SPACE
For this look for increasing the SAP profile parameter value abap/buffersize
Hope this helps.
Regards,
Deepak Kori
Similar Messages
-
RFC_SYS_EXCEPTION:No PXA storage space available at the moment.
Dear All:
When I Invoke the BAPI function through JCO, it sometimes happens the following exception RFC_SYS_EXCEPTION:No PXA storage space available at
the moment.
My JCO version is 2.1.3 and my SAP System is ECC5.0
My Step:
1. create the JCo clint pool .This is my properties file
jco.client.client=200
jco.client.user=steven
jco.client.passwd=123456
jco.client.lang=ZH
jco.client.ashost=192.168.0.1
jco.client.sysnr=00
2.through the JCO invoke the BAPI function ,set the needing field of import and export JCO.Structure ,JCO.Table.
3. excute the BAPI function, and sometimes occur the exception.
Is this the problem of system basis or in JCO?
Thanks in advance.goto RZ10 transaction & increase paramter abap/buffersize in instance profile. Restart required.
better take help of BASIS & make sure system has enough memory. -
Runtime error - No PXA storage space available at the moment
hi all...
plz clarify MY DOUBT...
i am unable to post the snap i got in my system..
what happened??
the current abap/4 program had to be terminated b'z there was no space available to load it.
the current program had to be terminated because a capacity limit has been reached
error analysis
unable to load program
the pxa was too small to hold all currently active programs for all users
trigger location of runtime error
program SAPLWB2B_SCREEN_HANDLING
include LW2B_SCREEN_HANDLINGUG7
row 130
module type function
i am the only person working in my pc...i have got installed ecc 6.0 in my machine for training myself...
plz tell me the sequence of steps to over come this...i have increased the virtula memory in my local drives also..
thanks alot
Aavula(gopi2goal)Hello,
you have to change a parameter of the SAP system to increase the memory used for caching the programs. The parameter is abap/buffersize. Go to transaction RZ10, modify the instance profile for the parameter and restart the system. You can check the size of many memory parameters in transaction ST02.
Kind regard, Hinrich -
Hi everybody,
Pls help me out the below said dump error which i faced during Goods receipt (MIGO).
No PXA storage space available at the moment.
I want to know the transaction code for allocating the memory space. Where to increase the memory space? In the error, it has asked to go to the sap profile and change the memory space.
What is sap profile and where we can find that?
Thanks & Regards,
Srinivasan.KHi,
Go to
usr\sap\<SID>\sys\profile and changed the profile to allow fo 700000KB. Now u just need to reboot and all should work fine.
Its advisable to make changes on the profiles inside R/3 using Tcode RZ10
Thanks.
Raja -
Hi,,
I ahve installed SAP IDES ECC 6.0 in my system. While executing transaction (VA01) I am getting error as NO PXA STORAGE SPACE AVAILABLE AT THE MOVEMENT"
How to overcome this issue.
I tried throuh RZ10 transaction , I donot know what prifile and version
In GENERAL DATA, WHAT DATA I need to enter in
System name, system number and instant name.
It would be helpful if somebody guide me.
Thanks in advance
Regards
KarthikYou need to increase parameter abap/buffersize to increase the program buffer
I tried throuh RZ10 transaction , I donot know what prifile and version
use RZ10 extended maintainance and the Instance profile, version???? the last one... A new version will be created when your mods are done.
Seems like you need to do some reading
Regards
Juan -
No PXA Storage Space is available
Experts,
During Client Copy in SCCL, the buffer space has been completely used up and PXA Storage Space is not available.
Therefore, all other programs are giving dumps.
I have modified the profile parameter abap/buffersize and increased the size from 150000 to 300000.
But the server needs a reboot in order for the change to take effect.
Question: What will be the impact of the restart on the copy process? Will the copy start from the scratch?Hi Joel,
You may want to check SAP notes and parameter documentation to set the abap buffersize parameter correctly based on your system.
Agreeging to Steve's above reply - After taking a restart to have the parameter values in-affect, you can always resume the client copy from the point it had stopped with error.
Hope you have sufficient user inactivity time to complete the Client Copy
Regards,
Varun -
I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?
The only available, signed, iOS, for your iPod, is iOS 7.1. That's why you can't install iOS 6.1.6.
-
Short dump - No more storage space available for extending an internal tabl
Hi All,
I have requirement in which my program generates a text file on my presentation server. Here my problem is, this requirement can not be executed in back ground, it should be done in foreground only. When I execute in foreground, if the data records comes to some 38 lacks then I am getting a short dump saying 'No more storage space available for extending an internal table'.
And in dump analysis under WHAT HAPPENED section it is giving as
' What happened? |
| You attempted to extend an internal table, but the required space was |
| not available.
Please suggest me, what I have to do in this case?
Thanks in advance.
Thanks,
Sudha MettuHi SuDash,
Allocation of the memory spaces will be done by BASIS people.
you can contact them..
Regards! -
Short dump -No more storage space available for extending an internal table
Hi All,
While running one program I get the short dump saying
"No more storage space available for extending an internal table "IT_862".
Error Analysis given in the dump log :
The internal table "IT_862" could not be enlarged further.
To extend the internal table, 14656 bytes of storage space was
needed, but none was available. At this point, the table "IT_862" has
8528862 entries.
Source Code Extract :
003360 loop at t_line.
003370 clear t_output.
003380
003390 * Increment Line counter
003400 add 1 to l_line_cnt.
003410
003420 t_output-object = t_stxh-tdobject.
003430 t_output-id = t_stxh-tdid.
003440 t_output-spras = t_stxh-tdspras.
003450 t_output-name = t_stxh-tdname.
003460 t_output-line = l_line_cnt.
003470 t_output-format = t_line-tdformat.
003480 t_output-text = t_line-tdline.
*> append toutput. " ERROR POINT*
Can you please suggest what can be the possible solution for the above error.
Thanks in advance.
SanjeetHi
Check out this thread:
Re: No storage space available for extending the internal table
Make sure you are not having an infinite loop.
Hope this helps
Regards,
Jayanthi.K -
No storage space available for extending an internal table.
Hi All,
I am using Function Module : VC_I_GET_CONFIGURATION in FI related Sales Order Report to get
configuration data for fields Model/Engine and Line no.
when the program executed in Production environment, It is giving Runtime Error TSV_TNEW_PAGE_ALLOC_FAILED.
ShrtText : No storage space available for extending an internal table.
The termination occurred in the ABAP program "SAPLIBINF" in "SELECT_INSTANCES_01" . its all happening
in the above FM.
Is there any possibility to get configuration data (Model/Engine and Line no) with out using FM.
please advise me on how you would like to proceed related to this issue.
Thanks & Regards
Satish ReddyHi Satish,
Please go through the below links and see if you can use this to address your issue,
http://wiki.sdn.sap.com/wiki/display/ABAP/ReplacementofVC_I_GET_CONFIGURATIONforperfomance+tunning
VC_I_GET_CONFIGURATION and paging memory
Regards,
Chen
Edited by: Chen K V on May 26, 2011 2:34 PM -
Error-No more storage space available for extending an internal table.
Hi Experts,
i am facing problem in a program . its showing runtime error.
Short text
No more storage space available for extending an internal table.
its showing error at
IF sy-subrc NE 0.
REFRESH p_wip_tab.
ELSE.
i_wip_tab-pspnr = i_internal_and_external-pspnr_prps.
LOOP AT p_wip_tab.
MOVE-CORRESPONDING p_wip_tab TO i_wip_tab.
==> APPEND i_wip_tab.
ENDLOOP.
ENDIF.
DATA: l_billable_tab LIKE p_billable_tab OCCURS 0 WITH HEADER LINE,
p_wip_tab LIKE zpswip OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF i_wip_tab OCCURS 0,
pspnr LIKE prps-pspnr.
INCLUDE STRUCTURE zpswip.
DATA: pernr_name LIKE pa0002-vorna,
END OF i_wip_tab.
How i can resolve this problem if anybody knows it then please reply me as soon as possible.
ThanksHello.
Probably you fill the internal table with too much data and it cannot hold that much.
You can either redesign the program so that it processes the data in batches of, say 100000 records, or contact your BASIS team and ask for their help. They could possible assign more memory to the running applications.
Reward if helpful.
Regards,
George -
Hi
Im SAP-BW Consultant. I need some code in the transfer rules. But while im loading data , im getting "No more storage space available for extending an internal table.
Pls check my code and modify it so that i can load the data of 5,000,00 records
TYPES: BEGIN OF tys_TG_1,
/BIC/ZIUTILICH TYPE /BIC/OIZIUTILICH,
/BIC/ZIRGRCH TYPE /BIC/OIZIRGRCH,
/BIC/ZPRODUCT TYPE /BIC/OIZPRODUCT,
END OF tys_TG_1.
TYPES: tyt_TG_1 TYPE STANDARD TABLE OF tys_TG_1
WITH NON-UNIQUE DEFAULT KEY.
data: e_s_result type tys_TG_1.
data: e_t_result type tyt_TG_1.
DATA : ITAB1 TYPE STANDARD TABLE OF /BIC/AZDSO_HYD00.
DATA : WA_ITAB TYPE /BIC/AZDSO_HYD00.
loop at RESULT_PACKAGE into e_s_result.
Select /BIC/ZIUTILICH /BIC/ZIRGRCH /BIC/ZPRODUCT FROM /BIC/AZDSO_HYD00 INTO
(e_s_result-/BIC/ZIUTILICH,
e_s_result-/BIC/ZIRGRCH,
e_s_result-/BIC/ZPRODUCT)
WHERE
COMP_CODE = e_s_result-COMP_CODE AND
PROFIT_CTR = e_s_result-PROFIT_CTR .
append e_s_result to e_t_result.
endselect.
clear e_s_result.
ENDLOOP.
refresh RESULT_PACKAGE.
move e_t_result[] to RESULT_PACKAGE[].
So im getting TSV_TNEW_PAGE_ALLOC_FAILED - No more storage space available for extending an internal table..
I think there is a problem in the code. pls look it and modify it.
Regards
kumarHello Kumar,
The amount of data you can store in an internal table is limited by the width of the table together with the available memory on your machine. If you try to put too much data in your table you'll always get that problem.
As I see it you have a table RESULT_PACKAGE with some fields and based on the entries in that table you select one row out of another table.
You can easily use
Select
/BIC/ZIUTILICH /BIC/ZIRGRCH
/BIC/ZPRODUCT FROM
/BIC/AZDSO_HYD00
INTO TABLE e_t_result
FOR ALL ENTRIES in RESULT_PACKAGE
COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
That still doesn't solve your memory problem hence you should try to process the data in packages, because you obviously don't have enough memory to process all data at once.
You can add the following:
Select
/BIC/ZIUTILICH /BIC/ZIRGRCH
/BIC/ZPRODUCT FROM
/BIC/AZDSO_HYD00
INTO TABLE e_t_result
PACKAGE SIZE xxxx
FOR ALL ENTRIES in RESULT_PACKAGE
COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
PROCESS your data here
ENDSELECT.
You might also want to discuss the issue with your basis team if there is a way to get more memory if there is no way to do that process.
Hope that helps,
Michael -
Statistics setup for 2LIS_11 and no storage space available internal table
Hi, I am running statistical setup for 2LIS_11_VAITM. It ran for 10 hours and failed with an ABAP run time error. The error is "no storage space available for extending an internal table". For 11 application, the selection options is sales org, company code and sales document. We have tried twice, and already drilled down to the level of sales org and company code, but still with error.
The only option is sales documents.
The volume of the data is 16 million records around in VBAP table which needs to be in the setup table.
What is the criteria to categorize the sales document.
Can we use order types? We have 200 values in the order types. And I am not sure the document ranges in each order type is clearly defined and not overlapping each other, so that we could load those in the setup table.
Please advise!! Or if you have other suggestions!
Thanks!Hi
It could be because of main memory problem... so Restrict your selections and do the statistical setup
by the way how many comp codes you have? restrict with comp codes or doc ranges
Thanks, -
Getting Dump "No more storage space available for extending an internal table" ??
Hi All,
In Web Ui while i was click save, it taking too much of time for saving at all lost it throwing dump such as "No more storage space available for extending an internal table". Recently Basis side did some activities for storing day to day transaction in back up server, after this activities i am getting this problem. i opening that Bsp component it throwing some information message such as component not integrated, i didn't see that message properly but i clicked continue button. After that basis activity only i got that information message once.
i dont know what is the issue. Can anyone give solution for this issue
Thanks,
AnbuAsk your basis guys to clean up the system memory. This is happening because no memory is left.
~Kavindra -
Dump -- No more storage space available for extending an internal table
In Our system we are getting this dump
No more storage space available for extending an internal table
and because of it no user is able to login into the system.
We have Some classes in the system and we have defined shared memories to all classes according to regions.
So for a particular class means users of a region are not able to logon to systems and we are getting these dumps in the system.
So please suggest first how to clear the shared memory & how to conclude what activity in system made the shared memory full.
Regards,
Shivam MittalMy OS is HP-UNIX..
And we do not access on OS level,So please suggest the way to clear it from SAP level.
In dump it is also mentioned:
The internal table "\AREA=<Name>\INSTANCE=$DEFAULT_INSTANCE$\VER
SID=2\OBJ={O:1.2*\CLASS=<CLASS>\DATA=GT_BUFFER[1]-DATA" could
not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "\AREA=<Name>\INST=$DEFAULT_INSTANCE$\CLNT=100"
Row width: 156
Number of rows: 0
Allocated rows: 63
Newly requested rows: 1216 (in 19 blocks)
Please also suggest what is the internel table name that is causing the issue.
Regards,
Shivam Mittal
Maybe you are looking for
-
Error:16 - restoring Adobe Photoshop CS6 from time machine back up
I am trying to restore a back up of my PS CS6 on my iMac but it comes up with an error: 16 saying uninstall and reinstall eth product but I do not know where to reinstall the product
-
XML messages eamil (Problem)
http://www.flickr.com/photos/25222280@N03/ Hi, All We are using XI 3.0 Support package: 20 I can expalin the probelm step by step please help me about thanks in advanced Step: 1 I am trying to get XML message from XI system messages shows in SXMB_MON
-
Question on darkroom template design feature.
Dear members: I am working on a web site using the Darkroom template available in iWeb and have a question. The navigation menu that appears on top of the page(s) is made up of a surrounding frame (thin white line) and a translucent white fill. I am
-
Proxy error when Rescheduling a report
When rescheduling a report we get "An error has occurred: $Proxy8" after we click the Parameter tab. Restarting the browser and rebooting the computer do not fix the problem.
-
Dear Sapients! All settings are maintained for Subcontracting delivery of RM to Vendor. In ME2O:- Error is " Document is incomplete: You cannot save the delivery" as in ME2O delivery sent in background so could not edit the document. Anybudy knows t