No quality notification type has been defined for inspection type 89

Hi
When I am creating a manual inspection lot and want to create a quality notification it gives me this error "No quality notification type has been defined for inspection type 89" where do I assign the notifications to the inspection lot.???
I want to know where do I configure it??
Regards
Suresh

Hi
Path for assigning the Qualtiy notification type to Qualtiy  inspection type:
SPRO--> Qualtiy Mangement --> Qualtiy inspection --> Inspection lot creation -->
Maintain Inspection types.
Select the inspection type and goto details screen
You can find notification type field in the details.Give the value and Save.
Regards
Ramakrishna

Similar Messages

  • Output type config error:No communication data has been defined for transmi

    Hi Gurus,
    i have copied an existing output type ZOCT to ZORD . when i change the sales order the output is automatically triggered but is not processed successfully instead it is in red. when i see the processing log i could see the error below.
      green Object 0000000133                                        
      green Output type: UK Sales Order                              
      green  Processing log for program RSNASTED routine ALE_PROCESSING
       RED   No partner profiles (message control) maintained         
    I tried adding communication data in VV11 but i get the below error.
    No communication data has been defined for transmission medium A
    Message no. VK603.
    I am using ordrsp and orders05 in partner profiles and in message control tab i am giving
    V1 ZORD SD10 values.
    Please suggest me to correct these errors. Your help is much appreciated.Thanks.
    Regards.
    Sanjeev

    Hi V V Reddy,
    Thanks a lot for your inputs. I have debugged the program rsnasted at routines and in EDP12 there were repeated entries .
    So i deleted all the partner profiles and created and generated them agian.
    I have also missed to maintain SP partner function in output type partner functions. I do not see any errors now.
    Thank you very much.
    Regards,
    Sanjeev

  • APP-PO-14258 no rate has been defined for this date

    Hi,
    When we are trying to receipt an error is appearing
    APP-PO-14258 no rate has been defined for this date
    Cause The rate type that you have entered uses pre-defined rates. No rate has been defined for the currnet rate type and rate date combination.
    Action: Enter a rate date for which a rate has been defined
    Please assist me.

    Are you using foriegn currency?
    If yes, You have to define exchange rate for that date.

  • No Project IMG has been defined for Starting Reference IMG  SOLMAN ERROR

    Hi All,
                 I created a off release project in prodcution and assigned logical compenents. When I am trying to create a IMG object for SPRO it is showing an error stating that "No Project IMG has been defined for Starting Reference IMG ". when I click Ok button it is showing another message ""Screen output without connection to user.". I Verified in project administration(solar_project_admin)> System Landscape>IMG projects, status for distributing IMG projects to component systems is showing in Red color. No IMG projects have been distributed into the system.
              RFC connections are showing are correctly. I am not able to find the problem and solution. Could any one help me to figureout the problem and what needs to be done
    Thanks in advance,
    Sreekala Rapuru.

    Is it mandatory that i need to create a project view?
    I have created a view "activity necessity", but not have selected any of the check boxes in "mandatory/optional/nonrequired". As well i havent generated it. I can do the "configure" now without errors
    my question is - is there anything critical which is related to this views? I went through the help page you sent me.. Is this for creating the implementation guide?  any guidelines you can send me about this is highly appreciated.
    thanks!

  • No Project IMG has been defined for "logical compt". Starting Reference IMG

    Hi,
    I have my logical component setup, and have my DEV system added. I have the BPH setup, and is trying to do configuration. when i select an IMG and click on "configure" i am getting the following error, but it takes me to the IMG
    Error:
    "No Project IMG has been defined for Z_LOGIC_COMPT. Starting Reference IMG"
    I went and checked in solar_project_admin, system landscape/project/IMG. Selected the development system from the "system role for IMG projects". I can see it in RED. How can i generate this? I guess its because of this, am getting the error above
    Thanks!

    Is it mandatory that i need to create a project view?
    I have created a view "activity necessity", but not have selected any of the check boxes in "mandatory/optional/nonrequired". As well i havent generated it. I can do the "configure" now without errors
    my question is - is there anything critical which is related to this views? I went through the help page you sent me.. Is this for creating the implementation guide?  any guidelines you can send me about this is highly appreciated.
    thanks!

  • No expense type for estimated costs has been defined

    Hi SAP guru,
    My client wanna check budget from travel request. Check budget through Funds Management already available when post travel expense before posting to FI however they need on the travel request.
    I read the documentation, it could be happen when approval the travel request. The problem is travel request used the activity, and try to enter the estimated cost as value.
    When we enter the estimated cost, system refused with error message:
    No expense type for estimated costs has been defined. Cannot save
    Message no. PTRA_WEB_INTERFACE174
    How to link the expense type to estimated cost?
    or how is the scenario in order we can check budget from travel request?
    any kind help will be appreciate,
    dewi

    Hello Dewi,
    If you have the funds management active, you need to go to        
    maintainance view V_T706B1 and create an expense type for which   
    you choose out of the 'special use' drop down box the value       
    'estimated cost, no reimbursement'.                               
    Background: When saving a travle request we build up a commitment 
    for the estimated cost. This is new functionality.
    Regards,
    Raynard

  • Order type 'OR' has not been defined for sales area (IDOC related)

    Hi,
    iam getting the status error as order type 'OR' has not been defined for sales area for ORDERS inbound idoc(it's in status 51),i looked at EDPAR(voe4) table and edsdc(voe2) tables,  the sales area has been defined, i don't know why iam still getting this error. please let me know if anyone have any idea or faced any kind of this problem.
    Thanks

    Hi,
    I believe this is nothing to do with the setting the IDOC value..Some config is missing...
    Check to make sure if there is a record found in the view V_TVAKZ for the combination..
    IF not check with your function consultant regarding this..
    Thanks,
    Naren

  • No catalog profile has been maintained for notification category

    Hello
    I have created the Catalog Profile with catalog code groups and assigned the codes..The profile have been maintained in technical object masters .No catalog profile is maintained for any notification type. Now when I am creating a notification M1 it says "No catalog profile has been maintained for notification category M1"...It copies the catalog profiel of the technical object after I maintain the technical object in Notification .
    I want to avoid this info message..How  do I avoid this message for the notifications without catalog profile...
    The message details are:
    No catalog profile has been maintained for notification category Z1
    Message no. IM005
    Procedure
    Please maintain the corresponding entries for the catalog profile and allocate this catalog profile to the notification type.

    Hi Shaikh,
    This message can not be skipped with any SPRO settings because this message
    Viz.: < ELSE.
        CLEAR E_RIWO02.
        MESSAGE I005 WITH I_TQ80-QMART RAISING  INITIAL_REPORT_CAT.
      ENDIF.> 
    is hard coded in program LIWO2U05.
    If at all you want to bypass this message then you need to change the above mentioned program for bypassing the message.
    Sundar

  • Mac won't open some files MasterPlan.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    I had this problem of not being able to open some files a couple of years ago and eventually was able to fix it but i can't remember how. Any help would be grateful.

    The following document should help: Error: Adobe Reader could not open '*.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and was not correctly decoded.)
    Please update this thread if your issue is resolved.
    Thanks,
    Shashi

  • I bought an ebook but when I  try to download it I receive a message stating 'Adobe reader could not open .....acsm because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wa

    Can anyone assist me? I keep receiving this message when I download my ebook ''Adobe reader could not open .....acsm because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't decoded).'
    Much appreciated

    I think you should ask in the Digital Editions forum, Adobe Digital Editions

  • Why can't I open a pdf file on my desktop?  I keep getting this message: Adobe Reader could not open '8pdk_96_4.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and w

    Why can't I open a pdf file on my desktop?  I have Adobe Reader and running OS 10.10.1  I keep getting the same message: "Adobe Reader could not open '8pdk_96_4.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."

    I tried that.
    I saved the file 8pdk_96_4.pdf to my desktop and tried to open it using Adobe Reader but I get the same message: Adobe Reader could not open '8pdk_96_4.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

  • When I try to open a PDF downloaded from Adobe DC I get an error message:Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email

    When I try to download a PDF from Adobe DC, I get an error message: "Adobe Acrobat Reader DC could not open 'nrneph.2015.33.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)"
    I am using a Macbook Pro, OSX 10.9.5, Safari browser. Previous versions of Adobe Acrobat have worked fine for years.
    WGC

    What's the name of the file you are attempting to open?  Is it "ScreenFlow_4.5.2.dmg"?  If it is the correct name then the message is correct and you are attempting to open a file with DMG files extension and not one with a PDF file extension.  Adobe Reader opens PDF files an not any other file type.

  • I keep getting an error on my MAC when i try to open any and all JPG FILES.  How do I correct  Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent

    Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
    that is the message how do i correct this problem

    It sounds like your file associations are messed up and Reader is trying to open your .jpg files. Is this correct?
    If so, you just need to change the associations to choose what application opens them. Here's how: Change File Associations in Mac OS X

  • Hi, I have a MacBook Air and try to save and open pdf document but receive this message: Adobe Reader could not open 'aw14lookbook.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an ema

    Adobe Reader could not open 'aw14lookbook.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    Most likely http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html

  • Have recently updated Adobe Reader and now unable to open downloaded documents - Message received is could not open 'file name.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email a

    Have recently updated Adobe Reader and now unable to open downloaded documents - Message received is could not open 'file name.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded). When I check the file it shows Zero KB downloaded but the file appears - any suggestions?

    Obviously your download was not successful.
    What is your operating system?  How exactly do you download such files?

Maybe you are looking for