No Quantity/ value update at Movement type

Hello All,
At Material type level with valuation area SAP controls check / uncheck Quantity/ Value updating (OMS2)
In our specific business scaenraios, we use material type (HALB) with valuation area combination with / without Quanity & Value updating. Hnece, above setting will not work in our scenario.
is it possible to have control of Quantity/ Value updating by using a custom movement (ex: copy of 101 to 1Z1)?
Really appreciate your thoughts!
Thanks
Siva

Hii shiva, lots of threads are available regarding this .
have u gone thru.plz search sdn, u will get good reply.
quantity and value update
Quantity update and value update in case of account assignment category
Material Type that updates Value but no Quantity
Quantity and value updates for stock.
quantity/value updation query
hope u will get sm idea.
Note : Do not use SMS Speak.Avoid links while answering,try to give your own suggestions.
Edited by: Jeyakanthan A on Jul 22, 2011 10:25 AM

Similar Messages

How to know which stock type updated within movement type

Expert,
I need to know which stock type updated within each movement type.
I'm using two different system (SAP and Oracle) which is in each system updating stock. So i need to do stock calculation manually from that two systems.
I'm planning to imported material document data (from MKPF & MSEG) to Oracle and then combine the stock calculation.
And then i'm facing this :
Ilustration :
MIGO transaction - Goods Receipt PO - Stock Type Unrest
in MSEG field BWART : 101, SHKZG : S, INSMK : blank --> no problem
MIGO transaction - Goods Receipt PO - change Stock Type to Quality Inspection
in MSEG field BWART : 101, SHKZG : S, INSMK : 2 --> no problem
MIGO transaction - Transfer Posting - movement type 322 (reversal QI to Unrest.)
in MSEG field BWART : 322, SHKZG : S, INSMK : blank --> problem
in MSEG field BWART : 322, SHKZG : H, INSMK : blank --> problem
I have a problem that in MKPF & MSEG there is no indicator which stock type updated within movement type (BWART) 322.
How to know that first row will be updating stock QI and second row will be updating stock Unrest.??
I've already checked to OMJJ, SM30-V_156SC_VC, table T156... and still having no clue.
Or is it just a 'hardcode' ? And i need to do 'hardcode' too in Oracle system?
Thank you so much.

The stock type indicator doesn't update for the movement type 322 in table MSEG.
At the time of transferring, you do not have to enter the stock type for movement type 322.
I can give you one clue, check can it fulfill your requirement.
You have two line items for movement type 322 in MSEG table, There are a field XAUTO will be updated as X for credit entry.
You can assume, the line item (without value for XAUTO) is for less from QI stock and the line item (with value X for XAUTO) is for add to unrestricted stock.

OMS2 setting for quantity & Value update.

Whenever new plant is created (after go live), we have to do the the Qty & Value update (OMS2) for that new plant/valuation area for each individual material type.
While doing this we have select the material type individually for each material type & then checking the Qty & Update field which takes lot of time.
I like to understand is there any smart way to update the quantity & value update for all material type in single screen. Currently we have to go to individually for each material type.
This will save lot of time & Smartness in consultant work.

Hi,
Plant is considered as an operating area or a branch or a location within a company which concerning with production facility or branch office or large warehouse storage .
When a new plant is created – it is always better to check OMS2, OMWD and other related assignment or copy from existing running plant. Also there are other related factors individually involved to plant only for which a new plant is required; all are needs to be attended. So instead of saving time, better check all settings (excise registration, if any) for anew plant to work business effectively.
Regards,
Biju K

Some key figure are not update for movement type 101

Dear All,
I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
I have loaded the data according to stranded procedure in "How to Load...."
I have checked the values of material in R3 and it is there.
Example of the record::
Material    Plant Movement type Calender Day    quanity Base Unit
10101      01       350                     01.02.2006     20             KG
10101        01       101                     05.07.2006                      KG
10101         01      101                      10.07.2006                      KG
The Quantity is not appearing in second and third record.

Hi,
Please check whether you have set ''Rule groups'' at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
Please check whether you have set this option at transfermation level.
For example, may be in your case materials from different plants are updating to different key figure.
Thanks,
Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

Quantity/value updation query

hi all
PR-RFQ/Quotation-Price comparison-PO-GR-IR, when I am doing this process I want only update quantity only, I dont want to update value updation
Pls tell how it is possible is there any configuration required in this scenario
Pls tell me as early as possible

Dear Sandeep,
You can use material type: UNBW when create a material master record, this standard from SAP that only update for Quantity.
Regards,
w1n

Quantity/value updating

Dear expert:
i create a PO (with account assignment) with a material belongs to a material type has not set quantity and value updating. i get a material document when i do goods receipt against this purchase order. i know there will no quantity and value update, but i wonder where the data is stored. please give me some clue.
thanks and best regards,

Hi David,
When you are creating PO with qty & value updating untick, system will ask for account assignment mandatory (ex: K cost centre) while creating PO & when you do GR the qty part will go to cost centre consumption & value will be booked for that cost centre used. you can see controlling document in GR, for PO without cost cenre you see accounting entries here you see cost centre entries.
Regards
Rang
Message was edited by:
Ranganath Mysore

Profit Center not updated for mov type 511

When we are doing the goods receipt through transaction MIGO with mov
type 511 (Receipt of delivery without charge) as 2nd line item along with
mov. Type 101 as first line item, profit center document is not getting
updated for 2nd line item (GLPCA-MSL), but for 1st line item (mov type
101) profit center getting updated.
If we are doing the GR with movement type 511 alone, profit center
(GLPCA-MSL) updated correctly.

hi,
As per your error i might understand.
please check for second line item Item okay is marked or not.
if its 511 then please check whether Pricing control in MA-master whether its a Moving average or Standard price.
as you said for singular 511 profit center gettng updated then you can very well compare to GR's.
Regards,
Ninad Kshirsagar

Subcontract GRN - disable quantity field for 543 movement type

Dear All,
1) while making the GRN for subcontract PO the raw material will get consumed by 543 movement type but here the field is editable and we need to make it uneditable
2) also if you might have observed that raw material qty will be calculated as per ratio but if i change the semi-finished matl qty the consumption qty of RM is not amended immdiately and if we need to take as per ratio in PO, we need to close the line by pressing " + " and amend the semi-finished qty and system will calculate the ratio and you can check by again pressing "+"
this is certainly not desirable and we need the change in RM qty immedietely after changing semifinished goods qty.
Please suggest me how to make it without help of ABAPER.
Regards,
Vimlesh

Hi,
Saying with regret that it is not possble in standard SAP .we had faced the same problem at my cleint side.We had gone for a custom development where the quantity field against the Input material will be not editable .
Regards
Sandeep

How to manage the personal value list of movement types

When selecting the movement type from F4 Help, you can set the personal value list on the F4 Help pop-up screen(i.e. Tr-cd:MB1A).This list seems to depend on users.
Questions are.....
1. If you can manage the setting of this list from other management transactions like SU01, could you tell me which transaction should be used and how to manage it ?
2. If impossible to manage it, the setting information must be stored into some DB table in some way though. Could you tell me the name of the table ?
Thank you in advance for your help.
Best regards

Hello Hideki Kozai,
First of all, include ONLY the mvt types in your (user's) favouite list by pressing "add to favourite button" on F4 help. These mvt types are normally used by users.
If you want to delete from the favourite, then select that particular mvt type and click on "Delete from favourite" button, so that will not apprear in next time.
The other way is suggested by Sumit, remove from the transaction list itself so user will not be able to carry out that mvt type.
Hope this helps.
Regards
Arif Mansuri

Classification Data (SLED) not Updated for Movement Type 561

Dear All,
I have noticed that after uploading the opening stock with movement type 561, the Classification data (Date of manufacture & Shelf Life expiry date) which was captured in MB1C is not updated in the batch master in Classification Tab.
Is this standard SAP behaviour for 561 movement type? Or is there any config is missing?
Please advise.
Regards,
Suresh.

Hi Suresh,
For your question I understand that while uploading the initial balances, system didn't ask you for the Manufacturing date or total shelf life date. Following is the solution:
You have to maintain "Check SLExpir.date" and "Classif.batches" indicators for the movement type 561 or any movement type you required. This customization can be perform through SPRO>>MM>>IM>>Goods Mvt. and mvt. No.
Also activate SLED at plant level in customization.
Regards
SAK

Error in quantity/value determination in condition type P101

Dear experts ,
I am getting bthe following message in the condition type analysis in PO for the condition type P101 . I want to know from where does the sysytem pick th value of the said condition in PO . Further , I observe that the system in NOT picking up the MAP/ SP of the material . It takes some other value . In some cases even if the MAP exists the system picks the value as "0.00 " for the said condition type in PO .
Please guide
Regards
Anis

Dear Experts ,
P101 condition type is not picking the MAP value in PO . It sometimes takes 0.00 or some other value other than MAP . Please tell me what could be wrong ?
Regards
Anis

Movement Types and value string in account determination.

Hi Team,
In the account determination how and where the movement types and value string are assigned to each other.
Thanks,
Sanjay

hi
Value Strings
Posting records are assigned to each relevant movement type in Inventory Management and to each transaction in Invoice Verification.
Value Strings indicates the posting rule that always contains the same account assignment characteristics for a certain transaction or event (for example a goods movement or an invoice receipt).
Each goods movement is assigned to a Value String and each Value String in turn is assigned to Transaction/ Event keys. These settings are pre-defined and can not be changed.
You can see the linking of Value Strings in the following tables:
T156S- Movement Type: Quantity/ Value Posting (For movement type--> Value String)
T156W- Posting String Values (For Value String--> Transaction/ Event key)
I had found the following Value Strings in the system: WA01, WA03, WA04, WA06, WE01, WE06 and WF01.

Movement type 311- get value against a material

Hi All,
I can get a report of stock value and qty against a material from MCBE report.
But for movement type 311,I am getting only the stock qunatity but not value.
Will there be associated value for this movement type.
Is there any other way where I can see associated value.Please suggest.
Thanks in advance.

Hi,
Mvt type 311 is the transfer between storage location to location in the same plant. Only quantity will be updated and no value will be updated because the valuation area in the same plant.
Here only material document will be generated and no accounting document.
You can see the stock report in t code MB52 locationwise stock with value.
Regards
Ram
Edited by: ramachandran subramanian on Apr 6, 2009 10:02 AM

Movement type linkage with Register updation

Hi all,
I would like to know which is the customisation that prompts the system to update the movement types to appropriate registers especially 601.
Is it in:
'Specify Which Movement Types Involve Excise Invoices' under Tax on Goods Movement.
But it describes that the customisation is for Input movements.
Regards,
Karthik

Hello Sarhan,
My question is not how to assign Movement Type to Schedule line Category which flows into the Delivery document.
It is how do we corelate the Movement type for Goods Issue with the corresponding Excise Register updation.
Regards,
Karthik.

Need Fields KDAUF, KDPOS, BWART update in table GLPCA for movement type 633

Hi All,
I need following field update in Table GLPCA for movement type 633 (Consignment Issue):
KDAUF : sale document no.
KDPOS : Order Line Otem
BWART : Movement Type
The same fields are updated for movement type 601 (Standard order). Also I checked with Table MSEG and find the same as above.
Thanks in advance.
AT

You should use the BAPI instead BAPI_GOODSMVT_CREATE
of BDC.
http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm
Welcome to SDN. Please be sure to award points for any helpful answers and mark your post as solved when solved completely. Thanks.
REgards,
Rich Heilman

No Quantity/ value update at Movement type

Similar Messages

Maybe you are looking for