No quants exist for posting changes. Creating TOu00B4s in LU04.

When creating transfer orders in LU04, we get an error message "No quants exist for posting changes'. We are using batch managed and serialized materials. Using QM interface, so, inspection lots are created at Goods Receipt. When QM team "accepts" batch materials during inspection lot, there is no problem, but when "accepts" serialized materials, the system creates posting changes notices but can not create transfer orders sending the message before described. This is because after receiving the serialized materials, we receive one piece at a time in order to create one inspection lot for every serial number. But when we put away the materials, we put them away in the same bin. so, system assigns one quant and one inspection lot to the bin, updating the last one every time we put away one serial number. When system tries to look for the inspection lot number selected in QA32, is not finding it in the bin at WM level because the bin only contains the last inspection lot that was put it away.
With batch managed numbers there is no problem since SAP divides the bin in different quants with the correspondent batches assigning an inspection lot to each quant.
Is there any alternative to solve the issue with the serialized materials? We are using SAP ECC 6.0.
Thanks for any help.

Hi,
The reason why we put away serialized materials into the same bin is because materials are physically small and they fit more than one in each bin. The warehouse is structured in this way and we plan to use it like that because it wouldn´t be feasible to create one bin for each serialized material. Is there any other way to manage this situation?
Thanks in advance.

Similar Messages

  • No quants exist for posting changes

    Dear Experts ,
    Please help on that error which is coming when i am trying to release the stock from qualtiy to unrestricted "no quants exist for posting changes" in transaction LU04.since the stock is moving successfully from 902 to 922 storage type but while trying to move from 922 to destination bin, these message is coming up .Please help.
    Regards

    Hi Frenchy,
    Thanks for co-operation.Actually , i am running the process as mentioned below , please revise and check,
    1- (MIGO) GR for warehous managed stock
    2- (LT06)create TO for TR which has been created in MIGO
    3- (LT12 ) confirm that TO.
    4-(QA32) release the stock from quality to unrestricted
    5- (LT05) while I am trying to process the posting change document , that error is coming and when i checked that posting change no.through (LU03) , i found it is still not processed with stauts blank so please guide what is the reason for that error .
    Best Rergards

  • No Quants exisats for posting changes

    Hi,
    When I create transfer order for the posting change number, I am getting the error message
    "No Quants exisats for posting changes"
    It is not allowing to create transfer order.
    Thanks and regards
    Muruegsan

    Please share the screen with posting change notice 3 so that we can know what it did.
    As far as I can assume, it is completely processed.
    See the field below - Post.Chge Status - share the screen with this status, and share the
    screen from LU03 with complete info on PCN...

  • No Quants existing for PCN

    Hi gurus!
    When i'm trying to create TO for PCN system throws error as " no quants exists for posting changes".
    The indension of posting change is to transfer the stock from quality to unrestricted using Mvt 321..There is sufficient amount of stock in Quality.
    Please throw light on what are the things to be checked to overcome this error.
    Reg
    prasanna

    Do you have enough available qty in QI stock?  You may be having strock in Quality in MMBE but when you check in LS26, can you see 'stock for putaway' or stock available?
    If stock for putaway, then, in LT01 usint mtype 999, move the stock to a physical storage type.
    Also, when you create TO for PCN (I guess in LU04),  you can see the stock in storage types.  Make sure 'available qty' exists.
    I think If stock are not putaway in WM, you cannot use them for PCN

  • Bin determination in automatic TO creation for posting changes

    Hello guys,
    could someone provide some information or some links on how the automatic bin determination for posting changes will be processed in SAP WM?
    Actually I'm looking for some further information for automated processing during a posting with movement type 309.
    What data from the posting change will be taken into account for the automated bin determination?
    Or is it 100 % comparable to the standard putaway / stock removal strategies?
    Thanks for some hints on that.

    Hi,
    I would like to add a point here that there is possibility of transmitting a screen widow to hav the value of GR number. You can do the settings  in OMLR in the AddlData for the appropriate Mvt (eg 321)
    This will cause to have the GR number to the PCN, which is compared with the GR no in the quant existing, while creating the TO wrt PCN.
    For eg: Material           Qty              Stk catgry                Bin                      GRno
                     A                  20                    Q                      B001                  5000000102
                     A                  40                    Q                      B003                  5000000140
    Now, when transfering the stock category form Quality to unrestricted, for 20 qty, a PCN will be created bforethat a pop-up screen flows in which u'll b giving the GR no as 5000000140.
    So u have the PCN for Qty 20, with GR no 5000000140.
    When u create a TO wrt PCN, system will pick the stock from the bin B003.
    I don't know how far this may light u.
    Reg
    Prasanna

  • Immediate TO for posting change

    Hi,
    Is it possible to have immediate TO for posting change?
    I have done the following setting in LE-WM Interface to Inventory Management: Assigned the reference movement to WM movement and checked the indicator for Create transfer order immediately -A.
    I am able to manually convert the psoting change notice -> TO without any error. The system also works fine in case of Automatic TO. However the system does not create TO's immediately.
    I have one  more question: During Automatic / Immediate TO creation, how does the system know the affected stock? For ex.
    In case of transfer posting using 321, how will the system  select the source?
    Regards
    Deepak

    Hi,
    I think the following may apply to your issue.
    When you post a material document in IM, and movement types both "with" and "without" automatic transfer order creation exist in that document, the system does not start the automatic transfer order creation program.
    Check out this link: http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm

  • Error occurred during WM processing for posting change delivery

    Hi Experts,
    I am getting the following error when i try to create Outbound delivery aginst PO.
    "L9 612 Error occurred during WM processing for posting change delivery"
    Diagnosis
        The indicator AUFER from the delivery type contradicts the
        storage location constellation that was determined by the
        WM system.
        TVLK-AUFER = '<VAR2>'
        WM = '<VAR1>'
    1.Purchase order is Stock transport order ME21N ( UB)
    2.Try to create Outbound using VL10B and i am getting the above error,
    Thanks in advance.
    Cheers...Gopi

    Hi Gopi,
    Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
    The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
    Resolution:
    Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
    If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
    change the order required from X to "B".
    Hope this will help.
    Regards,
    Sudhir

  • Maintain number range interval 01 for posting change notices

    Hi,
    I am doing transfer posting using movement type 321 (quality to unrestricted) for one material.While posting i am getting error"Maintain number range interval 01 for posting change notices" Message no. L0015
    WM is active for this material and doing this movement for one plant which is newly created in system.Wil you please advice for which document type i had to maintain number range.Please inform SPRO path / Transaction to be used to make required changes.
    Thanks & Regards
    Atharva

    Maintain number range for posting change in tcode  OMLW

  • Transfer Order auto create for Posting Change not working

    Hello Gurus -
    When we release an inspection lot from "Q" status, it creates a posting change notice, and we have it configured to create a TO in the background to the same bin, and auto confirm.  The desired and intended result is to take something from "Q" status to unrestricted status, while keeping it in the same bin - and avoiding the user having to deal with the transfer orders.  Essentially it is seamless and all in the background, the user just sees that he has changed something from quality status to unrestricted.
    It works fine when the entire quantity is selected for the usage decision, but when a partial usage decision is made, the transfer order does not create - and requires processing in LU04 for the posting change.
    Why would this work for an entire qty, but not work for a partial qty - and simply require someone to go in to LU04 and hit "create transfer order" - with no additional information?
    Any help would be most appreciated.  Does it have something to do with a setting of quants?

    Hi,
    In case of a usage decision for a partial quantity, it is not possible to create the Transfer Order for the generated posting change notice automatically. This is only possible when the full quantity is released. The same happens if you release a partial quantity and post the rest to blocked stock or scrap. The reason is, there needs to be a user decision, which part of the quantity has to be posted, this is necessary for example when the quantity is distributed in the warehouse over many storage bins. But even if the full quantity is on one storage bin, there is no automatic TO creation. You can see this also in the online
    processing (LT05), in case of partial quantities you have to enter the selected quantity in the quant list, for a full posting this is not necessary.
    Hope this helps,
    Sinéad Curran

  • How to create automatic Transfer Order for posting change delivery mvt.321?

    Hi,
    We are using HU with WM functionality; While posting stocks after UD, the system creates a posting change delivery instead of directly posting the stock to unrestricted stock from quality stock.
    Now that we have to process the ourbound delivery bu creating a transfer order and confirming it and also do a Post Goods Issue against delivery then only the system posts the stock into unrestricted stock.
    Our client doesn't want to go thro' these process steps. They would like the stock to be posted to unrestricted automatically after UD stock posting (movement type 321). Is there a way out to automatically process the posting change delivery in the background including Transfer order creation and confirmation and PGI please?
    Thank you,
    Regards,
    Madhavkrishnaa.

    Pls see the customizing.
    SPRO:  Logistic Excution>Warehouse management>interfaces-->Define Quality management

  • Cancel Pick For Posting Change

    Hi Guys,
    does anybody know if it´s possible to do a cancel pick for a posting change?
    We have implemented PP and a corresponding PSA. For bringing our goods to PSA we use DOCCAT SPC.
    Cancel Pick as known in PDO doesn´t work. We need the same functionality for SPC.
    Any suggestions?
    Thanks and regards,
    Tobias

    Hi,
    I think the following may apply to your issue.
    When you post a material document in IM, and movement types both "with" and "without" automatic transfer order creation exist in that document, the system does not start the automatic transfer order creation program.
    Check out this link: http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm

  • Images for posting changes

    Dear SDN,
    If I am using delta and loading into cube, and sometimes, there is corrections posted and the cube data is no longer valid. And each period values loaded is a cumulated amount from last period. So, there is dependency.  For example, cumulative balance. If I have loaded till september and correction is made to February, that means I have to reload from Feb to Sept and derive the cumulative balance all over again??
    What is the standard way to handle this form of changes?
    For FISL, is there a way to handle this using images like before-after , additive etc?
    I am not sure how to apply images to handle changes. Or is there easier standard ways to do this? Right now, I would delete everything and reload which is not very efficient way to me.
    Regards
    Adette

    Hi Dinesh,
    So, does it mean that the delta process for FISL extractor, & all extractors in general, is fixed and cannot be changed?
    Right now, I have no system to work on. so, cannot find out from ROOSOURCE table.
    For FISL, to handle cumulative balance and adjustment postings to prior periods, would it be workable solution if I  put an ODS in between the Datasource and the infocube?
    When corrections are made to prior months, what administrative operations must I apply to the cube? Since the affected period is not longer accurate as well as all subsequent months data loaded in the cube.
    I still have no clue what is the standard way to handle this.
    regards
    Adette

  • TO for Posting change

    Gurus,
    I need the system to create a automatic TO when i take a usage decision in QM.What setting is required?

    This is for immediate:
    You need to set automatic creation of TO in the second table of the IM/WM Interface for your scenario (e.g. stock status etc.) via:
    IMG\Logistics Execution\Warehouse\Interfaces\Inventory Movement\Define Movement Types
    Set  u2018Au2019  in Immediate TO creation field
    You should also set mail recipient in event of failure
    IMG\Logistics Execution\Warehouse\Interfaces\Inventory Movement\Activate automatic TO creation\Assign Recipient

  • Procedure for Clearing Open Transfer Requirements & Posting Changes

    Dear All,
    With my present SAP System, both IM & WM Stocks are zero for a given Sales Order / Line item. But there are pending Transfer requirements & Posting changes due to the fact that the users have not completed up until the TO Confirmation Stage. Now that the stocks are in harmony in both IM & WM, what do we do to the open transfer requirements and posting changes. What is the best practice procedure for the above scenario.
    Appreciate an advice for the above scenario
    Thanks
    Shabeen Buhary

    Hello,
    Write a program which will call transaction LB02 for TR & LU02 for Posting change notice (PCN).This program will make status of these TR & PCN complete.
    I already used the same.
    Regards
    Prashant

  • Error in posting change delivery

    Hi
    We are implementing the WM with HUM. we have MTO scenario and in MTO HU movement cant possible through VLMOVE.(SAP Gap)
    So i tried by
    1) assigned the stock sale order to unrestricted using 411 E(MB1B)
    2) Then pack and create HU in production location
    3) Move the HU using VLMOVE(311)
    4) Now again assigned the unrestricted stock to Sale order stock through 412E (MB1B)
    In 4th step a posting change delivery should be created. but when I save the document then i get the error
    "Dlv. type (dlv. catgry ID for mat. 1100040 and BWART 412) cannot be determined*_
    *Message no. VL295"
    I think I am missing some settings in SPRO for IM-WM movement type and when i saw then i didnt fine the movement type 411&412.
    How can i make the posting change delivery for MTO scenario.?
    Pls help me in this regard.
    Regards
    Anjali

    And also maintain:
    SPRO/Logistics General/HUM/ Basics/Material Management/ Set QM check and delivery type for each mvt. (for 412E).
    It will try to determine for 412 E with consumption E as well. This has category ID in standard. So in the other customizing it will try to find a delivery type for posting changes for category ID which isn't there, as only TP is there.
    So either make a new entry in Delivery type determination in HUM Delivery customizing or change the delivery ID category in SPRO/Logistics General/HUM/ Basics/Material Management/ Set QM check and delivery type.
    MdZ

Maybe you are looking for