No question here, , just  a comment I verigzon sucks,  I had an aircard and didn't work, not the first one either.  they have 3 years of

this site even sucks,  I have had a running battle with verizon for four years.  I had an air card that kept going from 1x 2g 3g 4g and back.  they told me that i was in a switching station and my issue.  I told them my house doesnt move.  then after putting up with this and haveing to wait to send my invoiecdes to my customers when it happened to work was unacceptable.  we finnalyhad to say goodbye.  O boy that didn't settle well.  they have put me through the ringer.  To the point that just today I got it straightened out.  I think.  they suspended my service and then sent me a bill for 73 bucks.  they tried to charge me 350.00 for terminating and I have been a customer for over ten years.  they charge me little fees on my bill every couple of months.  Its incredible.  If i ran my business liike this I would be out of business in a month.  I stuck till 2015 then I'm gone, somebody has to have better service.  fyi I pay 210 bucks per month, I'm not a small customer.  I have many more comments but this is getting long, will give more details later

markchackett
Well, that was pointless. You didn't specify anything that happened, and I'm not quite sure who you expected to see this. This is mainly a customer-to-customer support forum. Verizon does respond, but it's debatable whether they would reply here.
Also, the ETF applies to everyone. You signed a contract with them agreeing to the ETF. It doesn't matter whether you've been a customer for 10 years or just started last month, a contract is a contract.

Similar Messages

  • Slower than slow. Not the first I know but have some questions please.

    Hello fellow Verizon users. First let me tell you about my pc.  It's second hand,  HP Pavilion, Windows Vista, 32-bit, Windows 7, sp2. Hope this helps. My router is Gateway Westell 7500.
    I have been reading the replies to others who have posted that their connections are very slow, but do not understand the replies and don't have the technical know-how to report back all of the info. 
    There was one link that I did click on where I typed in the IP address and it brought up my router information. All but two headings read that , more or less if you don't know what you are doing..Don't!  However I did write one thing down. One was the down speed which is 3360 Kbps, and the up speed is 864 Kbps. Does this say anything about why my internet is so slow? 
    In task manager I noticed that there is information .... Processes, performance, CPU Usage and so forth. Although these numbers mean nothing to me, do these stats say anything about why I am having this issue? I was told at one time that the Services tab that shows a listing of the names and status of functions that are running, needs to be cleaned up. Here again, I do not know what these functions are and what they are for.
    When I first signed on with Verizon High Speed Internet, everything ran fine and fast.  I have talked to tech support about this and they took control over my pc, but did not fix anything.
    Off of the topic, but when I would try to get help on Verizon Help Page, all I'd get is IE Cannot Display This Webpage. Called tech support and they installed Google Chrome.  So what did that do?  Anyway.... 
    Also, when the Verizon Internet Security Suite is scanning while I am online, most of the websites stop responding or it takes so long to open a website that I just shut down.
    I am at a loss here and getting ready to trash the thing. Could it be the router, or something else?  I have cleaned up, done defragging, deleted cookies and so forth.
    Thanks for reading and for any advice that someone could give to a not so technical user.  

    Sounds like you've done much of what would cover a slow computer. if the system, booted into either Windows Vista or Windows 7 isn't feeling slow it's most likely something up with the Internet connection. We'll sort that out for you and also work with anything that needs to be tweaked on the PC to get the most out of the service.
    We've established one thing already. Your line is synchronized properly for 3Mbps service, which is 3360/864kbps. This also signifies you are on G.DMT ADSL or another ADSL1 standard. ADSL2 and ADSL2+ modes display different sync rates for the same speed.
    If you could, can you supply to us a Speed Test from this website: http://web100.rit.edu:7123/  (needs Java) or for that matter, use http://www.speedtest.net/ to supply a speed test? The second site is easier to get results from as it gives you an image link. The first test is often more reliable for testing but you'll need to take a screenshot as lately they haven't been allowing Clipboard access due to tightened browser security.
    In addition, if your service feels slow, does it only feel like this during the evening and night time hours or is it like this constantly, even in the morning?
    Since you mentioned the machine getting really slow during a VISS scan, that makes me wonder: How much RAM is installed in your system? To find out go to the Start Menu, right click on Computer and then click on Properties. Under "Memory" it will display how much memory the system has, and if there is a certain amount of memory that can be used. Knowing that bit of information would be good too since a virus scan should not cause slow net performance unless the machine itself is loaded down. Your browser should be operating in RAM and using limited disk resources (which virus scans consume, due to Disk I/O).
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • I lost my filter plug ins when I install Elements 13.  If I choose one plug in in Preferences it installs it.  But if I try to choose another one it just replaces the first one.  How do I install multiple filter plug ins?

    I lost my filter plug ins when I installed Elements 13, i.e. Topaz Labs, Nik.  If  choose one plugin in preferences it will add it to the filter list.  But if I try to add another filter it just replaces the first one.
    How can I get my multiple plugins back?

    Sorry to jump on this thread, but it seems like I have a similar problem. Oh. BTW, Happy New Year!
    I have filters from Topaz, Imagenomic, ePaperPress, and Redfield. In the past when a new version of PSE came out, I just copied and pasted the folders w/ the ".8bf" files into the Plug-Ins folder of the new version. This time it didn't work.
    I have been searching for a clue. I came across a confusing comment in a post from some Adobe gal [that has been linked multiple times. It said:
    "Please click on Photoshop Elements in the top left corner and select 'Preferences'." The confusing thing about this is that I have no "Photoshop Elements" in the top left corner! As this is the first step, I'm stuck there...
    Here is what I see in the upper-left corner:
    When I click on the Elements 13 Logo, I get a small drop-down menu that has no "Preferences" option. I have versions of PSE back to 10 and none of them have "Photoshop Elements" in the top-left corner.
    BTW, I'm running Win 7 Home 64.
    I noticed that PSE 13 loaded into my Program Files folder, whereas all previous versions went to my Program Files (x86) folder. That indicates that 13 is running as a 64-bit app? Does that require different plugins?

  • I have a comment.  I am very upset with Photoshop and all your tutorials regarding the quick select tool.  I have watched many tutorials and read instructions until I am blue in the face.  This tool does not work.  It is all over the place and all of your

    I have a comment.  I am very upset with Photoshop and all your tutorials regarding the quick select tool.  I have watched many tutorials and read instructions until I am blue in the face.  This tool does not work.  It is all over the place and all of your tutorials make it look so simple.  How can you advertise this as a viable tool when it just doesn't work?

    It is all over the place and all of your tutorials make it look so simple.
    This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
    How can you advertise this as a viable tool when it just doesn't work?
    Concluding something does not work because you fail at using it is not necessarily always justified.
    The Quick Selection Tool certainly has limitations, but your post seems to be more about venting than trouble-shooting – otherwise you might have posted an image where you failed to get an expected result.

  • Do I need a different apple id for each device? I have two iPads and an iPod but can only purchase things on the first one. When I go to verify the questions they say they are wrong.

    Do I need a different apple ID for each device I have? I have two iPads and an iPod but I can only make purchases with the first one I purchased. It tells me the security questions are wrong but I know they are not because I wrote them down. I have also reset them and my password once. Please help if you can

    You can not login into iTunes or the App Store using VPP credentials. You must purchase all apps/book/etc.  from the VPP website. Then you can redeem the codes thru itunes/app store or import the codes thru apple configurator. Here is the url for the VPP website: https://volume.itunes.apple.com/WebObjects/MZFinance.woa/wa/login?cc=us
    (It will not affect any of the apps you already have but the id can only be used for VPP.)
    Cheers,    
             Alec

  • I just bought an android phone and the previous owner of the number had an iphone and imessage wont work, how do I fix that?

    I just bought an android phone and the previous owner of the number had an iphone and imessage wont work, how do I fix that?
    I recently bought a Samsung Galaxy S4, and my wife has an iphone. We found out that imessage wont come through from her. After we went to the AT&T helpdesk they said that she could turn off imessage on her phone and that I would get texts on my S4. But then so would everyone else who has an iphone. That  won't work for everyone in my company that has an iphone. So what I am wondering is- since I recently got this phone, should I get a new number? Or should I contact ATT or contact Apple to try and get this number de-activated? I'm thinking I'll never get into the icloud account that this number is attached to, but maybe someone has some advice on that?
    I just sincerely want imessage to work on this phone and I'm willing to take the steps to do that.
    Please help

    Either one of the two should work - getting new number from carrier or contacting Apple to revoke phone number from imessage system.
    That is if your problem is described correctly.

  • Hi Everyone, Just wanted to seek your assistance. We're using and Adobe InDesign CS6. The XMedia UI Plugin for it, will it allow you to open .xml files in InDesign or that plugin is just used for Importing XML? Thanks in advance.

    Hi Everyone, Just wanted to seek your assistance. We're using and Adobe InDesign CS6. The XMedia UI Plugin for it, will it allow you to open .xml files in InDesign or that plugin is just used for Importing XML? Thanks in advance.

    I've moved your question to the InDesign forum.

  • I have just updated my iphone 3gs to iOS 5 (final version) and couldnt seen to activate the phone...any help

    i have just updated my iphone 3gs to iOS 5 (final version) and couldnt seen to activate the phone...any help

    To expand on Rudegar's comment, often, updating a jailbroken or hacked phone will permanently brick the phone.
    If your phone was jailbroken or hacked to unlock it, it is now most likely completely useless.

  • When trying toedit a text message on my iphone5 the edit bubble will pop up but it is no responsive for about thirty seconds before it will respond to the key functions. It just lags behind. Has anyone else had this problem and if so is there a fix?

    When trying to edit a text message on my iphone5 the edit bubble will pop up but it is non responsive for about thirty seconds before it will respond to the key functions. It just lags behind. Has anyone else had this problem and if so is there a fix?

    I rarely record automation, and when I do I never do a second pass (usually hand draw automation in) but I have had problems with Logic 7 no longer playing back automation. I've been told its fixed in Logic 8, but in the mean time here is a work around.
    Select the region where the automation is (if there is no region, create one using the pencil tool and expand it to cover all automation) and go OPTIONS menu -> TRACK AUTOMATION -> "Move current track data to region data." Now everything should play back as expected. If you want to edit the data, simply select "move current region data to track data" and edit away.
    For some reason, Logic 7 will sometimes stop reading track automation data, but I have yet to have it stop reading region automation. This is a bug, and according to other users, has been fixed in Logic 8. Hope this helps until we eventually upgrade

  • HT201401 my earphones are not working on my iphone4 to play, stop or forward to other tracks or answering a call and i know its not the earphones as ive just paid out for a new pair at £27.99 and still wont work anybody got any advice as fed up honestly

    anyone can you help my earphones are not working on my iphone4 and i know its not the earphones has just bought new pair and no joy  I can not play, stop, forward to different tracks or anything cant answer call nothing end of ideas can anyone help pretty please

    Yes there genuine apple earphones I have now blown down jack slot and silly enough I turned my phone off and now it's back on earphones working properly now feeling a wee but silly as such a simple thing got them working.
    Thank you guys and I know where to come again if I need any further assistance.
    Again thank you everyone  

  • How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    Hi Celia51510,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    I can't tell from your post if you are using a Windows or a Mac Computer.
    Try deleting the iTunes application and redownloading the version you need below:
    iTunes 11.1 Download for Mac
    http://support.apple.com/kb/DL1614
    iTunes 11.1 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Cheers,
    - Judy

  • My husband just got an iphone. I've had mine for a while.  We use the same email address so I though we could use the same apple id and password.  But now it appears everything on my phone also shows up on his phone and vis versa, even "Notes."  Not good.

    My husband just got an iphone. I've had mine for a while.  We use the same email address so I thought we could use the same apple id and password.  But now it appears everything on my phone also shows up on his phone and vis versa, even "Notes."  Not good.  How do I unlink them? 

    Read this planning tips:
    iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

  • I use my 7th gen ipod on bluetooth and when the battery dies while on bluetooth it wont turn on or charge and the computer doesnt find it.  This is my 2nd nano in just over a month.  The first one had the same problem.  how can i fix this?

    I have the latest ipod nano (7th gen, 16gb) and I use it mostly on bluetooth. When the battery dies during use with the Bluetooth it doesn't take a charge, the battery doesn't turn on and of course the computer doesn't even acknowledge that it's plugged in. This is my second nano in just over a month, the same thing happen with the first one. I just want to know if their is a way to fix this so I don't have to keep sending it in? Or maybe pay the difference to upgrade to a touch?

    If the battery has been completely depleted on the Nano (not really a good idea) then it is going to take 15 to 30 minutes before your computer can see it. Same thing will happen with an iPod Touch.

  • Hi, I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750!  Can I update ACR?

    I just downloaded and installed Photoshop cc and the Camera Raw version is not the latest one available,so now I can no longer open files from my Nikon D750!  Can I update ACR?
    I have been using the new version of ACR with PS6 and have been able to open the D750 files,now I'm stuck.
    Thanks,
    Greg E

    You were probably using the Release Candidate version of camera raw 8.7, which one gets from Adobe Labs.
    http://labs.adobe.com/technologies/cameraraw8-7-cc/index.html

  • Help! I've just updated my iPhone 5 to iOS 6.1.2 and I can't find the LTE switch only the 3G one.

    Help! I've just updated my iPhone 5 to iOS 6.1.2 and I can't find the LTE switch only the 3G one.
    Settings > General > Cellular *I know that the LTE switch should replace the 3G one 'cause my mom has it
    I updated it from iOS 6.0.2 I think so I skipped 6.1. Is this a possible reason (tho I doubt it)?
    is there any way to fix this?
    thank you in advance!

    Are you using an LTE enabled SIM? What carrier are you using?

Maybe you are looking for