No questionaire found when create Survey

Dear ,expert :
   I work in SRM7.0 SP 10 .and evaluation scenario .
  I create the questionaire in spro:Integration with Other SAP Components-Data Transfer to the SAP Business Information Warehouse-Settings for Application-Specific DataSources (SRM)---Web Survey Cockpit for SRM Supplier Evaluation
  and assign the questionaire to the survy .
  Now ,I create one Survey in portal ,but now I can't  find the questionaire I created .
  Why ?
Alex!

If this for ad-hoc surveys, you need to login to the portal and create the Questionnaire from there and this will open a SAP-GUI
window and the Questionnaire need to be created . If the Questionnaires are created from SPRO , they won't be visible and can't
be assigned to the surveys.
hope this helps.
regards
velu
Edited by: velu333 on Oct 17, 2011 12:47 PM

Similar Messages

  • Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

    Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11.  I can see the tables and views in the database tab, but no stored procedures.  If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

    Ben thanks for the reply!
    Yes that is the process I am following:
    In Dreamweaver, open the page that will run the stored procedure.
    In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
    In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
    Enter the ColdFusion Data Source user name and password.
    At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
    Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated.  I need to make sure it is pulling from the correct server but right now it appears to be working.
    Thanks
    Dwight

  • Duplicate attribute key found when creating a dimension

    Good Afternoon,
    I created a cube with dimesnions and all is working fine. I created three dimension ZONE,BLOCK and STREET and these are reltated to the FACT table and all is well. But i was thinking since these 3 dimensions are related and coming from the same table, why
    not just create one dimension with ZONE as the primary key and the heirarchy as zone>block>streetname. In the DSV i created a named query.
    SELECT DISTINCT ZONE, BLOCK, STREET
    FROM dbo.MYTABLE
    group by zone,block,street
    order by zone,block,street
    Please see the sample dataset as well, where when i process the DIMENSION fails with an error that the "Duplicate attribute key was found, column name:Zone, value:1). I know zone and also the other two columns when processed are repeated more than once
    and hence this, is there a way to get what i want.
    ZONE BLOCK STREET
    1 0 Chesapeake
    1 0 East Market
    1 0 East Maryland
    1 0 East Washington
    1 0 North Capital
    1 0 North Delaware
    1 0 North Illinois
    1 0 North Meridian
    1 0 North Penn
    1 0 South Delaware
    1 0 South Illinois
    1 0 South Meridian
    1 0 South Penn
    1 0 Virginia
    1 0 West Georgia
    1 0 West Jackson
    1 0 West Market
    1 0 West Maryland
    1 0 West New York
    1 0 West Washington
    1 100 East Washington
    1 100 East Market
    1 100 East Maryland
    1 100 East New York
    1 100 East Ohio
    1 100 East Washington
    1 100 North Alabama
    1 100 North Capitol
    Thanks
    SV

    Thanks Richard and SS. This is what i did.
    1) In the DSV i created a new named query, the same one i used.
    2) Set Primary Key on Street.
    3) Created a dimension STG_ZBS_DIM and while creating the heirarchy , i draged and dropped the fileds in the following order (zone>block>street).
    4) Tired to process , but getting the same error, except this time at the street level.
    What else i did was changed the primary key back to Zone, went into the attribute relations and set the relation from Zone to Block and then Block to Street, saved and processed and this time i got the error at the block level :-(
    Thanks
    SV

  • ***No Table found, when creating a recordset to MySQL Database

    I have made a successful connection to the MySQL database.
    When attempting to create a record set (Query) under the Application/Bindings Tab, I select the connection, but then the Table field says *** No Table Found
    Also under Application/Databases tab, the connections appear. When expanding the + for the Table it says "None"
    I do have Tables in the MySQL database which Dreamweaver has a connection to, so that is not the problem.
    I've searched multiple forums on the internet for this problem, and while I have found that others have had this problem, I have not seen any solutions.
    Any help would be greatly appreciated.
    I am a novice in this area, so if you need any additional information from me, please be as specific as possible as to where and how I can get it.
    Thank you in advance for your help.
    Additional information:
    Windows 7 Ultimate
    Dreamweaver CS3 (Creative Suite 3 Web Premium)
    Apache 2.2.15-win32-x86-openssl-0.9.8m-r2
    PHP-5.2.6-Win32
    mysql-workbench-gpl-5.2.25-win32
    Freshly reformatted computer and only installed the above software along with AVG antivirus.
    Edit: I should also note that this is for a local testing server. I am not trying to connect remotely.
    Best Regards,
    Blain
    Message was edited by: Blain1976

    Now the problem has gone from bad to worse.
    I previously had a connection to my database but just couldn't see the tables.
    Now after I added another user I can't even make a connection. Instead I get an error message that says "An unidentified error has occured"
    My server and database are actually running. I can loginto my database through the MySQL workbench. It says it's running. The apache server also says it's running and if I key in localhost in my internet explorer it says "It works!"
    I have now deleted the new user in MySQL  that I added and now I can't even connect to the database in Dreamweaver.
    Any suggestions?
    Thank you,
    Blain

  • Webapp not found when creating a new portal

    Hi all,
    I've just started exploring Weblogic Portal 8.1, and am now attempting to set-up a basic portal from scratch. Here's what I did.
    1) Created a Weblogic Portal Domain using the Configuration Wizard. The domain name is "mydomain". The server name is "myserver".
    2) In Weblogic Workshop, created a new application called "testportal".
    3) In "testportal" application, created a new portal web project called "portal".
    4) created "myportal.portal" portal in the "portal" portal web project.
    5) Tried to start the portal (URL: http://localhost:7001/portal/myportal.portal), but received this error message:
    <b>"Webapp portal not found in application testportal."</b>
    6) When I tried to hit http://localhost:7001/portal, I was able to hit index.jsp for the web application, so the portal web app is alright.
    Any ideas what I'm missing here?
    Thanks!

    I'm not sure of what is going on but just wondering.. did you drag and drop portlets on to the portal?
    I recommend you to try the below step-by-step tutorials.
    Check this out. http://e-docs.bea.com/wlp/docs81/startdev/startdev.html
    And try this. http://e-docs.bea.com/workshop/docs81/doc/en/portal/tutorials/tutFirstPortalIntro.html
    Seenu.

  • No data set found when creating a report

    Dear all,
    This is my first time using BI Publisher, and I am stuck at a very early stage.
    I have followed the various steps described in the documentation, up to creating a new report.
    When I try to do so, I fail as there is no available data set in the left panel.
    Another curious behaviour is that I have first to export and then import sample data as xml for the sample to be saved. Otherwise, when I just click on 'Save as Sample Data', the sample file appears to be associated with the dataset, but disappears at the next logon.
    What would cause such behaviours?
    Are these issues linked?
    Is it a configuration/setup issue?
    Or could it be a privileges/roles issue?
    Cordially,
    Albain

    Vitaly,
    1.  Yes, I checked "More Data Sources" - not there.
    2.  I tried adding the Field Definitions using Control Panel Add/Remove - no help.
       I tried removing the "Field Definitions" and then adding them again - no help.
    3.  Another machine does have the same version of CR.  It is running Vista.  Problem machine is running XP.
    4.  Clicked the "Reinstall" button in the Control Panel Add/Remove - this fixed the problem.  I did not need to uninstall the program.
    Both machines now exhibit the same list of connection types (with one small exception).  Thank-you for your hellp.
    .... Warren
    Edited by: Warren Pickell on Oct 23, 2009 11:55 PM
    Edited by: Warren Pickell on Oct 23, 2009 11:56 PM
    I'm trying to indicate "Yes, my question has been answered.", but it does not seem to "take".

  • Getting HTTP 404 - File Not Found when creating Items

    This happens when I try to create an item of any type. I can edit items already created, but I cannot create any new items.
    Take the Text Control for example:
    When I click on the Text item icon, I get the page that prompts for the Text Control Type. I select one, then I wait and get the HTTP 404. This happens with all items. For items that do not have subtypes, I get the error immediately.
    Any suggestions?

    I have some major work to do. This might require a call to Oracle.
    Udump trace file reveals the following for each attemp to create an item:
    ksedmp: internal or fatal error
    ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_opidsa+360] [PC:0x2080540] [ADDR:0x0] [UNABLE_TO_READ] []
    Current SQL statement for this session:
    select
    nvl(htf.escape_sc(p.plug_name),wwv_flow_lang.system_message('CREATE_ITEM_WIZ.NO_REGION')) plug_name,
    i.item_sequence,
    i.name,
    i.prompt,
    nvl(i.item_plug_id,0) item_plug_id,
    i.DISPLAY_AS
    from
    wwv_flow_step_items i, wwv_flow_page_plugs p
    where
    i.flow_step_id = :FB_FLOW_PAGE_ID and i.flow_id = :FB_FLOW_ID
    and
    p.id (+) = i.item_plug_id
    order by nvl(item_plug_id,0), item_sequence
    I shut down the database. I get this when attempting to restart:
    SQL>
    Connected.
    SQL> shutdown immediate
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup
    ORA-32004: obsolete and/or deprecated parameter(s) specified
    ORA-12528: TNS:listener: all appropriate instances are blocking new connections
    SQL> startup
    ORA-01041: internal error. hostdef extension doesn't exist
    SQL>
    Message was edited by:
    MartinWDC

  • No matching record found when creating Incoming Payment...

    Hi,
    I'm starting a transaction, creating a invoice and then creating a incoming payment.
    The invoice is created successfuly in memory I can see the next DocEntry and DocNum and passing it to the incoming payment as usual but I'm getting the error : No matching records found
    Any idea ?

    I found why.
    The Series used was not there.  But it's not obvious to know that it's because you set a wrong Series code with an error like this.

  • Jni.h file not found when creating dll

    I'm just learning how to use the JNI and have been following the tutorial provided by Sun. My knowledge of C and its compilation system is very limited (I'm a Java generation programmer) I try to create a dll using the method proposed by the tutorial like this:
    cl -Ic:program files\java\jdk1.5.0_09\ include
    -Ic:program files\java\jdk1.5.0_09\include\win32
    -LD HelloWorldImp.c
    -Fehello.dllI get an error message stating
    fatal error C1083: Cannot open include file: 'jni.h': No such file or directoryThe code is identical to the tutorial's code.
    I am running Windows XP and Microsoft Visual C++ 6.0
    The preprocessor statement where the error is located is
    #include <jni.h>and this is the very first line in the c program named HelloWorldImp.c
    I fixed this problem by just placing a copy of jni.h into the same directory, but a slew of other problems followed, and I don't think that that is a very good practice to get into anyway.
    I have set the paths of the directories of the include and include/win32 in my environment variables, because I don't know what else to do and I believe in luck. This also proved to be a miserable disgrace. How can I get the c file to compile into a dll? I know that this seems to be more of a c problem than a java problem, but I've compiled my share of c programs without difficulty. And I know that this seems like a pretty elementary problem, but my mother loves me anyway.
    Thanks for any help on the issue :)
    -Daniel

    hi
    this solution seems stupid,
    but try removing the space between file path
    cl -Ic:program files\java\jdk1.5.0_09\ include
    try
    cl -Ic:program files\java\jdk1.5.0_09\include
    this may solve the problem

  • DebugMBean not found when creating EJB3 Entity Manage

    Hi,
    Got exception when test my ejb3 entity bean out of container. weblogic.jar which I get from weblogic 10.3 has been included in he classpath.
    I checked the weblogic.jar, it does not have DebugMBean.class. I believe it is a weblogic bug. Can anybody have solution to fix it?
    Thanks,
    Bruce Xie
    public EntityManager createEntityManager() {
    if(emf == null) {
    emf = Persistence.createEntityManagerFactory(persistenceUnitName);
    return emf.createEntityManager();
    Exception in thread "Main Thread" java.lang.NoClassDefFoundError: weblogic/management/configuration/DebugMBean
         at java.lang.ClassLoader.findBootstrapClass(Native Method)
         at java.lang.ClassLoader.findBootstrapClass0(ClassLoader.java:891)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:301)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
         at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at weblogic.xml.jaxp.RegistrySAXParserFactory.<clinit>(RegistrySAXParserFactory.java:27)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
         at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
         at java.lang.Class.newInstance0(Class.java:355)
         at java.lang.Class.newInstance(Class.java:308)
         at javax.xml.parsers.FactoryFinder.newInstance(FactoryFinder.java:148)
         at javax.xml.parsers.FactoryFinder.findJarServiceProvider(FactoryFinder.java:298)
         at javax.xml.parsers.FactoryFinder.find(FactoryFinder.java:224)
         at javax.xml.parsers.SAXParserFactory.newInstance(SAXParserFactory.java:128)
         at org.apache.openjpa.lib.xml.XMLFactory.<clinit>(XMLFactory.java:60)
         at org.apache.openjpa.lib.meta.XMLMetaDataParser.parseNewResource(XMLMetaDataParser.java:352)
         at org.apache.openjpa.lib.meta.XMLMetaDataParser.parse(XMLMetaDataParser.java:320)
         at org.apache.openjpa.lib.meta.XMLMetaDataParser.parse(XMLMetaDataParser.java:296)
         at org.apache.openjpa.lib.meta.XMLMetaDataParser.parse(XMLMetaDataParser.java:268)
         at org.apache.openjpa.persistence.PersistenceProductDerivation$ConfigurationParser.parse(PersistenceProductDerivation.java:510)
         at org.apache.openjpa.persistence.PersistenceProductDerivation.parseResources(PersistenceProductDerivation.java:360)
         at org.apache.openjpa.persistence.PersistenceProductDerivation.load(PersistenceProductDerivation.java:326)
         at org.apache.openjpa.persistence.PersistenceProductDerivation.load(PersistenceProductDerivation.java:161)
         at org.apache.openjpa.persistence.PersistenceProviderImpl.createEntityManagerFactory(PersistenceProviderImpl.java:77)
         at org.apache.openjpa.persistence.PersistenceProviderImpl.createEntityManagerFactory(PersistenceProviderImpl.java:109)
         at org.apache.openjpa.persistence.PersistenceProviderImpl.createEntityManagerFactory(PersistenceProviderImpl.java:53)
         at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:84)
         at javax.persistence.Persistence.createEntityManagerFactory(Persistence.java:60)
         at JPATestBase.createEntityManager(JPATestBase.java:50)
         at JPATestBase.<init>(JPATestBase.java:23)
         at JPATestBase.main(JPATestBase.java:17)

    Hi,
    I do not see the DebugMBean class anywhere in the 3 com.bea.core.management.*.jar or 2 com.bea.core.mbean.*.jar libraries in the "modules" directory on WebLogic 10.3.0 - there is no longer a single webllogic.jar to check.
    As a workaround try switching your persistence provider to EclipseLink by adding the following line to your persistence.xml and adding the EclipseLink library via the patching instructions below. If you are running WebLogic 10.3.1 then you will only need the provider line - as EclipseLink is shipped in this version.
    <provider>org.eclipse.persistence.jpa.PersistenceProvider</provider>
    http://wiki.eclipse.org/EclipseLink/Examples/JPA/WebLogic_Web_Tutorial#Option_2:_Apply_Smart_Update_Patch_-Recommendedfor_10.3.0.0
    Also, there is a workaround to change the SAX parser you are using that is causing this issue - in the WebLogic forum that may solve this.
    NoClassDefFoundError: weblogic/management/configuration/KernelDebugMBean
    System.setProperty("javax.xml.parsers.DocumentBuilderFactory","org.apache.xerces.jaxp.DocumentBuilderFactoryImpl");
    System.setProperty("javax.xml.parsers.SAXParserFactory", "org.apache.xerces.jaxp.SAXParserFactoryImpl");
    thank you
    /michael
    www.eclipselink.org

  • Dynpro not found when create or change business partner

    Dear friends,
    I try to do some maintenance of business partner using tcode BP. An error has occur as below:
    Anyone can help me.
    Thanks in advance.
    Runtime Errors DYNPRO_NOT_FOUND
    What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLBUSS" had to be terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    The program had to be terminated.
    Error analysis
    Program "SAPLBUSS" tried to use screen 7015.
    The screen does not exist.
    Trigger Location of Runtime Error
    Program SAPLBUSS
    Include LBUSSO00
    Row 1,543
    Module type (MODULE PBO)
    Module Name PBO_START_SUBSCREEN

    Hi,
    Please check the screen 7015, is active or not.
    Regards
    HM

  • When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

    When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

    Anyone can help to advice how to solve this issue ?

  • When I try to open ITunes it brings up a box that says the iTunes Library. itl file cannot be found or created. the default location for this fie is in the itunes folder in the music folder How do I solve this

    My laptop was updating itunes and turned off and every since when i try to load itunes it brings up a window that says
    The itunes library.itl fie cannot be found or created. The default location for this fie is in the itunes folder in the Music folder.
    an I cant figure out what to do to get itunes to load so I can't use itunes at all which ***** since it also means I right now I can't add music to my ipod or apps or anything. So hopefully someone can tell me what happened and how to fix it or solve it

    Hi pgarard1,
    If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
    iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
    http://support.apple.com/kb/TS2363
    Regards,
    - Brenden

  • I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder.

    I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
    I have tried a few things but iTunes closes right after i click okay. Anyone know anything?

    Look in your Home > Music folder.  There should be an iTunes folder there and it should have a number of files and folders including one called library.itl  You want to guide iTunes to that file.  If you don't see that file or folder then in your next post you will have to be very specific as to what you do see or how you have your iTunes set up because that's where it should be according to default settings.

  • Itunes wont launch. I just installed itunes on Windows 7 PC. When i click the itunes icon the following message appears - "The itunes Library.itl file cannot be found or created..."

    I just installed itunes on a Windows 7 PC. When I click on the Itunes icon the following message appears -
    The Itunes Library.itl file cannot be found or created. The default location for this file is in the "Itunes" folder in the "Music" folder.
    I have checked and there is a file named Library.itl in the "Music" folder. I'm not sure where to go from here so any help would be greatly appreciated.

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

Maybe you are looking for