No Range proble for J_1IINTPR2
hi
When trying to maintain number range for J_1IINTPR2 through J1I9 i am not finding my Series group in the dropdown. i checked all my confic. its perfect. can any one suggest where could me the mistake
Jai
Hi,
Series and excise groups are assign to Plants. In case you are using, series group detrmine the number range and the excise group determine the GL account, and you can create 57F4 challan with one Series and excise group at a time for your requirement you can create separate series and excise group and both to be attach to your plant then for excise and non excise material you have to create separate Challnas, but you have to do detail analysis for furhter process, like capture of excise inovicem sales cycle , utilizatio etc. as that all are link with series and excise group.
regards,
zafar
Similar Messages
-
How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
Thank you for any help you can provide.
ArupThis is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
In the meantime..
Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
ie
You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
Wireless repeater is never particularly reliable in my experience. I would avoid it if possible. -
How to find out the Number range object for Incident number
How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanyaHI, an example.
data: vl_num type i,
vl_char(6) type c,
vl_qty type INRI-QUANTITY,
vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
NR_RANGE_NR = '01'
OBJECT = 'ZRG0000001'
QUANTITY = '1'
SUBOBJECT = ' '
TOYEAR = '0000'
IGNORE_BUFFER = ' '
IMPORTING
NUMBER = vl_num
QUANTITY = vl_qty
RETURNCODE = vl_rc
EXCEPTIONS
INTERVAL_NOT_FOUND = 1
NUMBER_RANGE_NOT_INTERN = 2
OBJECT_NOT_FOUND = 3
QUANTITY_IS_0 = 4
QUANTITY_IS_NOT_1 = 5
INTERVAL_OVERFLOW = 6
BUFFER_OVERFLOW = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard -
Maintain number range object for excise grp
Hi Gurus,
During stock transfer, while doing Goods receipt I am getting the below error
"Maintain number range object for object J_1IRG23D, year 2010, excise group"
Could anyone please tell me the trans code for maintaining no range for excise group...
Thanks,
RajaGo to J1I9 T Code for a particular object object J_1IRG23D, execute and then give the excise group and maintain the number series.
Regards,
Nagesh
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM
Edited by: Nagesh MS on Dec 20, 2010 3:59 PM -
Failed to allocate port(s) in the specified range(s) for the following....
Hi,
I'm attempting to install oracle 10.2.0 on Solaris 10.
When I create a database i get the error:
Failed to allocate port(s) in the specified range(s) for the following process(es): .....
So I look at the logs and there looks like to be some configuration issues but i'm not sure where to start.
I've changed the port from NULL to 1521 in listener.ora.
It worried me that it was set to null.
Ive tried running emca -config -all db ( not sure what central agent home should be set it as /app/oracle/product/10.2.0/Db_1 seemed to accept that)
This gives me the same above error.
Any help is greatly appreciated. Please note im both a novice solaris and oracle user
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /app/oracle/product/10.2.0/Db_1/cfgtoollogs/dbca/test2/emConfig.log.
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: DBSNMP
Nov 22, 2006 3:29:41 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 691205234
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYSMAN
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: test2, oracleHome: /app/oracle/product/10.2.0/Db_1, and user: SYS
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: test2
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties to /app/oracle/product/10.2.0/Db_1/sysman/config/emd.prop
erties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties has been copied to /app/oracle/product/10.2.0/Db_1/s
ysman/config/emd.properties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.properties to /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.
properties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/config/emoms.properties has been copied to /app/oracle/product/10.2.0/Db_1
/sysman/config/emoms.properties.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml to /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml.emca.
tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file /app/oracle/product/10.2.0/Db_1/sysman/emd/targets.xml has been copied to /app/oracle/product/10.2.0/Db_1/sysman/
emd/targets.xml.emca.tmp
Nov 22, 2006 3:29:42 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 agentHome: null isCentral: false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 isDBC: false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: test2 Host: honeyeater Node: null OH: /app/oracle/product/10.2.0/Db_1 isDBC: false
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_test2.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /app/oracle/product/10.2.0/Db_1/oui
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [app/oracle/product/10.2.0/Db_1]
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /app/oracle/product/10.2.0/Db_1
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /app/oracle/product/10.2.0/Db_1/oc4j/j2ee/OC4J_DBConsole
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /app/oracle/product/10.2.0/Db_1/sysman/config/emd.properties
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /app/oracle/product/10.2.0/Db_1/install/staticports.ini
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Contro
l [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at /app/oracle/product/10.2.0/Db_1/cfgtoollogs/dbca/test2/emConfig.log for more details.
Nov 22, 2006 3:29:43 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [55
40-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2266)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:426)
at java.lang.Thread.run(Thread.java:534)
Also got thie error in another log
Cluster Error Message: PRKH-1010 : Unable to communicate with CRS Servicesthanks mathias,
but i have already done, netstat -na |grep portnumber
but nothing no port in range are set
thanks howevar
regards -
Error in MIGO :Number range object for object J_1IINTNUM, year 2010, excise
Dear Experts,
While posting MIGO, System throws below error :
Mainintain number range object for object J_1IINTNUM, year 2010, excise
Maiintain number range object for object J_1IRG23A1, year 2010, excise
Maintain number range object for object J_1IRG23A2, year 2010, excise
Actually we are posting the MIGO for the fiscal year 2009, still i am getting error why ?
regards
rajakarthik.check the posting date what u r puting , it should be on or before 31/03/2010
i think this is only the issue dont looks like any other issue
or do one thing just o\go in SNRO and for J_1IINTNUM object put 9999 year and the number range
and try to post your transaction in 2009
hope this helps
Edited by: Umakant Bhangale on Apr 1, 2010 10:22 AM -
Can we create range variable for Query Key Date
Hello Gurus,
Can we create a range variable for Query Key Date ? when I tried to give a range of values for Query Key Date, I am unable to find Range Values option. I found only Single Values.
so, Please let me know if we can use Range variables for Query Key Date ??
Thanks in advance,
Regards,
AarthiHi Aarthi,
This is relevant for the time dependant master data that is being pulled in thw query. Like if you are using a nav attr in the query and this nav attr is time dependant, then which record (from the char master data) is to be pulled into the report, depends upon the key date that you specify.
The default key date value is the date on which the query is executed, that is <Today>.
Hope this helps... -
Division wise Separate numbering range required for invoices
Hi Gurus,
The requirement is Division wise Separate numbering range required for invoices. For e.g like 11 Steel Fabrication, 12 Aluminum Fab, 13 Carpentry & Join, 14 GRP/GRC, 15 Stone & Marble
Already a table ZSD_NUM_RANGE with fields like Client, Plant, Number range in the case of internal number assignment
Presently number range is based on plants.
I understand that Division field SPART is to be included in this table by using the exit given below:
User Exit For Billing
USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
The internal number range used in the standard system is specified in the billing type table and can be changed in this user exit. This user exit is only called when the billing documents is created.
May I know how far this is feasible to shift plant wise no. range to division wise no. range.?
Also if we do division wise number range, How about shifting to new invoice numbers in the middle of the FISCAL year?
Kindly revert back to me at your earliest.
Regards,
AnbuDear Anbu
Ideally speaking, invoice number range should be per plant and the user exit what you had indicated holds good. May be you can try with the same user exit.
thanks
G. Lakshmipathi -
Mass deletion of document number ranges intervals for several company codes
Dear experts,
We are running version ECC6 and are about to go-live a lot of company codes simultaneously. We would like to delete satndard number ranges intervals for these company codes.
Is there a way to delete the number ranges intervals (which have not been used) for several company codes at the same time ? I'm looking for a transaction or a program similar to OBH1 (used for the creation of number ranges ).
Thanks in advance for your help.
Best Regards,
StevenHi
I am also not aware of such T.code to delete number ranges for a company code.
Alternatively, you can go to FBN1 in change intervals mode.
From the Menu Select all and Press Shift + F2 (Delete interval).
Ofcourse, this have to be done individually for each co. code.
Regards -
PO create error u2018Number range ZB for object not definedu2019
Dear all
I have a error in ME21N to create PO,When I click save button,then occurs a error u2018Number range ZB for object not definedu2019.
I define a PO types:u2019Z506u2019 and assigned to the Number Range u20185Hu2019.The u20185Hu2019 is from 5070000001 to 5079999999 not ext.
The u2018ZBu2019 number range is defined PR,not PO.So I donu2019t know where does define wrong?
Please help me!
Thanks
SunHi
Please check if you have Defined the Number ranges for Document type ZNB in
SPRO-> Materials Management-> Purchasing-> Purchase Requisition-> Define Number Ranges
The reason the error is Coming like that is, in the Customizing of PO Doucment types in
SPRO-> Materials Management-> Purchasing-> Purchase Order-> Define Document Types-> Link purchase requisition - document type
here you have maintained the Link for the PR & The PO.
Thanks & Regards
Kishore -
Number range R4 for object BANF nearly exhausted
Dear,
when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
Best regards
Meng HM>
Meng HM wrote:
> Dear,
>
> when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
> I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
>
> Best regards
>
> Meng HM
Check this path: spro>MM>Consumption based planning>number ranges>define NR for planning run, execute and maintain the interval of planned orders.
Then apply this internval in OPPQ, under number range button.
Edited by: Afshad Irani on Aug 30, 2010 10:34 AM -
Multiple Range Selection for field Material in CS14
Hi friends ,
Is it possible to make multiple range selection for material field in tcode CS14 [used to compare primary and secondary BOM] i have made it ZCS14.
if i make matnr2 to matnr2-low
but my doubt is it feasible solution
please through some light on this
regards
sooryaDear Soorya,
What's your requirement? is that to compare the Alternative BOM's for multiple materials at the same time?
If it's going to be for comparing one more alternative for the same material,then it's a good report.
As per to my knowledge if the report is going to be for a list of materials Alternative BOM's means I dont
think whether it will be a fast(time wise) report.
Check & revert back.
Regards
Mangalraj.S -
Default range size for iterator binding
I noticed that the default range size for an iterator binding is 10. Is there a way to have no default? Right now I have to change it programatically by setting it to the value returned from the getEstimatedRowCount() method.
I assume you are looking for a way to set the default range size at design time? Currently, there is no way to do this, but if you are looking for another solution at runtime, you can use
getBindingContainer().findIteratorBinding(<IteratorName>).setRangeSize(num)
for the component you are using the iterator in. For example, in a data page, this would mean overriding the DataPage base class.
Hope this helps,
Lynn Munsinger
Java Tools Team -
Facing problem in Number Range Allocation for Objects in OM
Hello Friends,
I have couple of questions in setting number range for Objects OM :
1) Can we set one single number range for the objects in all planned versions or do we need to set different number ranges for varous planned versions?
2) If we are already using existing Internal Number Range in $$$$ for Objects in OM, how do we set number range External Number range to use it for forthcoming object creation?
3) If we set the External Number Range, will the system use the set num range combinedly for all object types or individually for each object type (Ex: If we have an external num range 100~200, then while creating Org Unit the system may take 100 after that if we try to create another Org Unit the system may take 101 in seqeuence. After creating these two Org Units, if we try create an Position object will the system start allocating the number from 102 or will it again start from 100)
4) Can we default number ranges for various Object Types Planned version wise? If YES, what feature is used to default this number range?
Regards
TharakHi,
For 1). Yes you can set number ranges for all plan versions.
2. You can devide like this.
IN - 00000001 to 49999999
EX - 50000000 to 99999999 - EXT.
3. In my view it is applicable to all Objects.
4. Don't know.
Reward me if helps.
Thanks,
vasu. -
Re : Maintain number range interval "" for quants
Hi
While doing the transfer order i am getting the following error.
" Maintain number range interval "" for quants "
How to solve this.
Thanks
Antodear sir
go to Tcode : OMLW click for quants tab, give your warehouse number and maintain the number ranges, for your warehouse.
Regards
jrp
Maybe you are looking for
-
A/R credit memo for closed A/r Invoice
Hi Guru's, Our Client want to make an A/R credit memo for closed A/R Invoice (i.e) payment is already received for that A/R Invoice. But in such scenario, the he is not able to get the referce of the A/R invoice as it closed... so he makes the stand
-
15" Apple Studio Display problems
I have an old 15" Apple Studio Display (Blueberry) that I'm using with my MacPro. Every once and awhile it will flicker. It acts like it turns off and then on. The screen never goes black. I can still see whatever is on the screen. In fact, it gets l
-
Click on Add (plus) button, but nothing happens
Hi, When I insert a new star point, end point, singal in, or signal out, and I want to add/remove fields, clicking on the Ad(plus)/Remove(minus) button, nothing happens. I mean, the popup window where I enter the names and types of the fields never s
-
I've just upgraded to CS5 and I'm having what appears to be a problem with printing. I open the Print Window from File\Print and then under color handling I select "Printer Manages Colors". I then go into the Print Settings window and under Color M
-
HP Deskjet2540 - only part prints documents from internet then gives up
I have recently installed a HP Deskjet 2540 All-in-One Series Printer on my home network. If I print from Word or Excel it is perfect. If I try to print a 2 page document from a website (eg a hotel I'm considering for a holiday), my printer prints ab