No range problem

Hi,
While doing MIGO for a PO (Excise PO), error comes for no range not maintained for object J_1IINTNUM 2008 and J_1IRG23A1 2008.
Itried resolving the same by goint to SNUM and maintaing the same for excise group 10(not sure what it means), but still the error persists. What to be done?
Regards,
Satyendra

Hi Indranil,
Did the same as told by you but still the error remains the same "Message no. 4F159"
MIGO is being done for PO prior to 1.1.2008.
Regards,
Satyendra

Similar Messages

Billing Number Range problem ( accounting document not generated)

Hi All,
I have created some billing types and for them I have assigned some internal number ranges. Now when I create a billing document it is getting saved with the proper number range but no accounting document is getting generated.
Also when I try to release the invoice I am getting an error which says " *Incorrect doc.no.: 10000009. Select document number between 0090000000 and 0099999999* "
K I N D L Y     suggest as U R G E N T.
Regards,
Danny.

Dear,
          Billing Number Range problem ( accounting document not generated) is not an error because when you create billing document then accounting document not generated. Accounting done after posting of that billing document with VFX3 or VF02 T.Code by account department.
           And for second issue you had define number range between 0090000000 and 0099999999 for invoice so thats why it happen.
Regards,
Sandip Shaktavat

Bluetooth range problem/mac mini

hello , i have a mac mini with the bluetooth/ airport installed. i have the mini connected to my 36 inch tv. i recently purchased an apple wireless keyboard and mouse. now as i can recall the range of bluetooth should be somewhere in the 30ft range. i was hoping to be able to sit on my couch and use this setup. now when i go more then 1 foot away from the mini with the mouse and keyboard they nolonger work. i updated everything and it still dosnt work. the mouse gets unconnected and the keyboard dosnt work then at all. can someone please help me for now i feel i have wasted my money and am going to return the mini, keyboard and mouse

I fixed this last night (Mac Mini, Late 2009). If you have upgraded your RAM there is a strong possibility that the bluetooth antenna came loose while reassemling the mini. I was very careful installing ram, but last evening when I dissassembled the mini I found that one of the bluetooth antennae was disconnected. Popped it back in, reassembled, and my reception went from 1 foot back up to the full extent of the room. If you are having range problems, take it apart (ifixit.com) and check it.

Error : Message no. F5695 number range problem

hii all
i am facing a serious error. my 'SA' document type has picked up maximum number from the assigned no range. and so that i have assigned a new no range in SA document type
but when i am doing a new doument entry in Tcode - FB50 system pick the maximum number for the newly assigned no range and getting error messege
"Number range 6000 in year 22 has been used up for company code 2011"
Message no. F5695
Co Code = 6000
No Range = 22
Fiscal year = 2011
also when i am doing vendor invoice tcode = FB60, my system also shows the same error related to that document type. please help to resolve
i am also facing this no range problem when i try to post document from FI to CO. please see the link
http://forums.sdn.sap.com/thread.jspa?threadID=2132125&tstart=0
why system pick up the maximum no? i cant understand. i have checked the object RF_BELEG and RK_BELEG. in Tcode - SNRO. but there is no inconsistency. please also suggest what should be the standerd setting in the above object in Tcode-SNRO
please help. i am unable to post any document
Regards
Rajesh

hi Marssel Vilaça
In FBN1 22 no range already has taken maximum no and showing the messege
"Number range 6000 in year 22 has been used up for company code 2011"
Message no. F5695
This is for SA document type. also when i make entry with different document type such as vendor Invoice (DR), it also picks the maximum number from the no range
You can I adjust my counter in BKPF? and how can i use the remaining no range?? in FBN1 all the no range in internal, not external
i am also facing this no range problem in CO also (Tcode = KANK).
I just confused. please see my 1st thread
please resolve
Regards
Rajesh

Z30 wifi range problem after upgrade to 10.3.1.1565

After upgrading on Z30 the OS from 10.2 to 10.3.1 I experience serious Wifi range problems. There is a room in our house where I had excellent wifi connection with 10.2 and now the Z30 does not find the router. Even the router SSID! If I go closer to the router, it connects (5-6 meters from the room where I tested). It is a quite new router, a Linksys EA6200 with the latest firmware. I rebooted the router. No result. I restarted Blackberry (switch on/off), no result. I deleted all wifi saved connection on phone and tried to reconnect. No result. I tried to make a soft reset (vol up/down buttons), no results. Dont understand, I made Over the Air (on wifi) OS update yesterday in the same room, same place. Now I dont see any router there altough the Android phone and the notebook gives 4 bar wifi there. Before OS Upgrade I made a full backup (everything) in the Blackberry Link, tried to restore to the earlier OS version, but the restore uploaded to the new OS the personal data and not the earlier OS System. How I could solve the Wifi problem or roll back to the earlier official version? I dont see possibility on phone. It's crazy to have a quite good business phone which is now unuseable for its original functions without normal wifi connectivity... I understand to advise hacking or restarting router, etc... but how about if I go to abroad? I cannot restart the router there... I need stable wifi or a stable operating system...

I have seen numerous posts on other forums about the degraded wifi performance on devices running 10.3.1.xxxx.
I definitely noticed a dropoff in signal strength when I went up to 10.3.1. I remedied it by putting in a better router, but I don't believe one should have to do that in order to maintain was was acceptable performance under a previous OS. 10.3.1 is supposed to be an upgrade after all.
I also notice a difference between Z10(STL100-1) and Z30(STA100-6) on 5GHz wifi : Z10 finds and connects with no problem, but Z30 does not find the network at all, even when right next to the router. I subsequently discovered that the router autoselects channel 149 on 5GHz, which the Z10 is happy with. For the Z30, I tried all other available 5GHz channels on the router in turn, and eventually found that Z30 will find and connect if the router is manually set to channel 48 only. A bit restrictive for a high-end device.
It has been postulated that the claimed improved battery life on 10.3.1 comes at the expense of compromised wifi performance. Could this be the case?
Hoping this issue soon finds itself in the "under investigation" box at BB.

Help with puzzling wifi range problem on Macbook Pro

Hi There,
I am experiencing wifi range problems with my MacBook Pro (10.9.4).
Our wireless modem (Arris DG860) is located in the office, in the center of our home. The wifi bars register full on my Macbook and the internet works well in office.
When I move my Macbook to the lounge room, 6 steps away, my internet stops working despite wifi bars remaining full. We also have an Apple TV in the lounge room (I have airplay disconnected on Macbook). 15% of the time, I can somehow get the internet to work in the lounge room (sometimes just by disconnecting airplay),then it mysteriously stops- with wifi bars remaining full.
85% of time, the internet doesn't work at all in lounge room (still full wifi bars). Other rooms of the house that are similar distances away from modem experience the same problem. We did not experience this problem with our old Macbook pro (purchased in '09). With our old Mac we had same internet connection, modem and Apple TV.
The only place our current Macbook receives good internet connection is in the office.
We also have an iPad and two iPhone 4S'
Any suggestions anyone? TIA

Most people who live in neighborhoods or apartments are not blessed with so few WiFi transmitters to contend with. There are no clear channels for most people, even assuming the user knows how to optimize their router, which most people don’t.
I would also explain that I am FCC licensed amateur radio operator K5ZN extra class. I know how radios work and how electromagnetic waves behave. Every diagnostic and symptom tells me there is some incompatibility between my MBPs radio and specifically the Comcast modem-router. In another discussion I gave some technical information about the problem which I spent several day diagnosing while using two different Comcast "Docsis 3" routers.
I have not seen this WiFi problem when using Airport or other standard routers like Linksys or Netgear. The OP didn’t say what router they are using. My suspicions tell me that Apple is moving in the direction of a very sensitive power-saving radio while ISPs are trying to blast the neighborhoods with powerful WiFi. The result is that my poor Macbook can’t get a good signal.

Out of Range problem

I have a G5 dual 2.3 with a Sony monitor (analog) connected to the DVI port by the converter that came with the Mac. I have a problem in that certain games set the default resolution to a setting that is out of range of the monitor. Specifically, the refresh rate is out of range for it. This same problem occurs with any VGA monitor I use. Is there any way around this? I just bought the Cars game for my kids, for example, and I can't use it (Cars does not have a windowed mode).
Thanks

As it turns out, I tried switchresX and I can force the game not to change the settings. It works, but it seems silly for me to spend an extra 17.00 to play a $29 game. Anyone know of a free utility that does the same thing?

Monitor out of range problem

I have a G5 dual 2.3 with a Sony monitor (analog) connected to the DVI port by the converter that came with the Mac. I have a problem in that certain games set the default resolution to a setting that is out of range of the monitor. Specifically, the refresh rate is out of range for it. This same problem occurs with any VGA monitor I use. Is there any way around this? I just bought the Cars game for my kids, for example, and I can't use it (Cars does not have a windowed mode).

as a wild guess, some monitors come with software drivers that allow to get more options for setting parameters.
you can check Sony site for any drivers for your monitor model, and also check what video card you have in G5 and check on card manufacturer site for driver updates for Mac OS.

Document Number Range problem

Dear All,
Previously Document number range(FBN1) for Invoice was External, then i have changed to Internal number, now the problem is that in Counter it shows 1800000126 but system is showing document number 1800000136. Pls help on this & when i am changing from Internal to External system is showing error as "Lower limit can only be changed during Initial Entry".
Pls pls help on this.

Dear ranjith,
If you want to change number ranges from external to internal no ranges,
from T-code FBN1 you can for the changes first go to ,<change status button> and make you counter no as 0 and save the intervals,
and come to change intervals button and change the no ranges according to ur requirement.
Assign points.
SU

Stored Procdure date range problem

Hi All,
My Vendor created a Stored procedure which asks for a date range when first creating a standard report. Once the date range is entered then I select which data fields I want to display, etc. Once in the report, I can see the parameter fields, but they have a [?] with a weird little yellow icon, and I cannot see the parameter fields in the parameter tab. My users need to be able to change the date range in InfoView, but since there isn't a date range parameter, they cannot, and I also cannot get it to show up in the report in CR 2008. The only time I can get the date range entered is when creating a report, here is the procedure that the vendor gave me:
XSAC_GET_TEST_COUNT
                      ( P_REPORT_CURSOR IN OUT XSAC_REPORTS.TEST_COUNT_VIEW_TYPE,
                        P_START_DATE     IN DATE ,
                        P_END_DATE       IN DATE )
Not sure how to fix this, and neither does the Vendor, although they created it.
Any help would be much appreciated.
I have other reports where I have successfully created a date range parameter, and they work fine, this is my first time with a stored procedure. and it asking for a date range when selecting the data source. Not from a date field in the report

Hi All,
I found the problem,
The first Option is: Show on (Viewer) Panel, it was set to Do Not Show . So it was hidden.
I changed it Editable and it works fine.
Hopefully this will help someone in the future.

Asset no range problem

hiii all
i am facing a problem relating to asset configuration. i am rechecking the asset configuration over all. i checked the chart of depriciation is attached to the co code. but when i am check the "define number range interval" under the asset class, when i am putting the co code in no range, the msg shows..... "co code does nor exist". but i can create asset master date through as01. why the msg shows like this. please resolve.
regards
rajesh

Hello
Please check the companoy code does not exsit is for your company code or not
Also check all the basic settings has been done for the company code or not
Please check the table BKPF whether any entries exist or not
If the problem still exist let us know the compleate erreo information with error message number
Thanks
Kameshwar Rao

Assessment: number range problem

Hi Fi-CO gurus's,
my problem is the following: I try to perform an assessment (Tx code 3KE5), but I receive an error message in the "display EC-PCA: Actual assessment basic list " screen:
Document number: range not found
And further:
Document number: range not found
Message no. GA703
Diagnosis
An error occurred during document number determination. No range was found for number range object GL_LOCAL, sub-object 0010.
System Response
No document number was determined. Results could not be updated.
Procedure
Inform the person in charge of number ranges.
Could anyone help me.
Thanks in advance.
Ric.

Hi Seth,
I checked out table NRIV and found entry....
But in GB02 I have the following problem:
when I try to create an interval for the group (group maintenance) I choose "Act. document from direct posting with GB0" ...
There is no displayed number range and when I try to create it, it is not possible because there is already an existing number range, but it can't activate it...
An it takes all the available range (from 000000000 to 9999999999)
Regards.
Ric

Date Range problem

hi,
on selection screen i am enetring the date range.
i.e 01.05.2006 to 10.05.2006
for this date range i am fetching material numbers to my itab.
actually there is no material numbers for the date range 02.05.2006 to 03.05.2006 but i nedd to display material number under that particular date only like below.
01.05.2006 02.05.2006 03.05.2006 04.05.2006 05.05.2006
1234                                                1567           4562
but for me output is coming like below.
01.05.2006 02.05.2006 03.05.2006 04.05.2006 05.05.2006
1234              1567           4562
how to solve this problem
Title edited by: Alvaro Tejada Galindo on Jun 3, 2008 3:43 PM

REPORT zp_example NO STANDARD PAGE HEADING LINE-SIZE 300.
TABLES : mara.
SELECT-OPTIONS : s_date FOR sy-datum.
DATA : it_mara TYPE TABLE OF mara WITH HEADER LINE,
       date LIKE sy-datum,
       m type i value 1.
WHILE ( s_date-low LE s_date-high ).
WRITE : s_date-low.
SELECT * FROM mara INTO it_mara WHERE ersda = s_date-LOW.
WRITE :/ IT_MARA-MATNR UNDER S_DATE-LOW .
ENDSELECT.
ADD 1 TO s_date-low.
sy-linno = 1. "   <----- check the number according to your page heading
ENDWHILE.

StarOffice 8 calc - select/delete range problem

I use calc for long time till now works fine.
Lately I encountered a problem when I want to select a range that I defined before, I'm using Data->Select Range.
but no range name appears at the list for selection.
I defined few ranges, but none appears.
The defined ranges show when I use Data->Consolidate but then it is not what I need to do.
The problem repeats when I want to delete a range (I couldn't find a way to edit it) using Data->Define range.
Is there a fix for that problem?
I'm using version 8 (update 9) on a windows Xp Home
Thanks for your kind help,

You can specify dynamic WHERE clause in the DELETE statement. Check this SAP online documentation for the same: [http://help.sap.com/abapdocu_70/en/ABAPDELETE_ITAB_LINES.htm#!ABAP_ADDITION_4@4@].
Try this:
DATA: V_COND TYPE STRING.
V_COND = 'FIELD NOT IN LR_RANGE'.
DELETE <FS_C> WHERE ( V_COND ).

Numer ranges problem in ARE

Hi All
I facing a problem while creating ARE1 and AR3 document number ranges are jumping ,not coming in sequence
what should i do ?
Sandeep

T-codes: SNRO, SNUM, J1i9
here give your ARE Object and check buffer is maintained for this object.
make it to 00 and save
from now onwards it will come in sequence
if u like points please

Graph range problem with tab control

Hello.
I am using LabVIEW 8.2.1
I have five XY-graphs in a tab control, with five tabs. One graph in each tab. When running, theese graphs is constantly written to, but the user is only allowed to watch one at a time.
The program also contain a maximum&minimum chart, containg the maximum and minimum value for every plot in the viewable part of the graphs. The user can zoom in on a graph, and then watch the max&min values in this picture. The values are calculated by taking the range to each graph, and use theese ranges to cut out the viewable part from the input data to the graphs.
The problem is, that the program only see the last viewed range. If I view a graph in a tab, the max&min values for this graph is correct, but the four other graphs dont get the correct values. The graphs data is written correctly. It seems like the ranges from the "hidden" graphs dont get updated when not viewed. Does anybody know how to fix this problem?
I have uploaded an example to this problem. See how the range just freezes on the not viewed graph, even the two graphs is exactly the same.
Thanks
Fredrik, Norway
Message Edited by Kalman on 06-19-2008 01:58 AM
Attachments:
graph_range_problem2.vi ‏24 KB

Frederik,
the reason for your issue is autoscaling. If the graph is not drawn, autoscaling will not take place, so you will not get any correct values, you will get the last autoscale-values.
The behaviour therefore is "works as intended" since it reduces CPU usage.
So the best way to work around is something like seen in the attached VI: you should compute the scaling for each graph on your own and use this to update the scales as well as the indicators (which i left out in my VI).
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.
Attachments:
Scaling.vi ‏25 KB

No range problem

Similar Messages

Maybe you are looking for