"No rates for 63021010 and Excise indicator 2; Normal rates being used"

Hi expert ,
When we create Excise order  and save and then use va02 in change mode than show error " No rates for 63021010 and Excise indicator 2; Normal rates being used "  we have all ready maintaind chapter id, and taxes and excise duty comes all well. but problam is showing msg , when we enter press then remove msg, its so tough for 100 items, plz give me soln for change status group.
REgards,
sohail

Hi,
Please check "Excise tax rate" in J1ID and check whether you have mantained Excise rate againts Chapter ID and Exe. Ind 1 or 2.
The final excise indicator for excise duty is maintained based on the excise classification of the company and vendor, company and customer. For each of the final indicators, the excise duty rates are maintained.
Regards,

Similar Messages

  • How to auto-detect a baud rate on UART or Serial port. and how to handle different baud rates for Transmission and Reception

    Hi,
    Till now i have used only single baud rate for opening a port, writing some stuff and reading back from other end.  This time requirement is little different, can SerialPort class
    be used to have different baud rates for Tx and Rx, I have not seen that in the msdn, but any other ideas also welcome!!!. I am experimenting!!!

    When I look in the Info.plist file for the AppleUSBCDCDriver kext, which is what the driver should be for a USB modem, there are three driver personalities listed: DeviceClass = 2, DeviceProtocol = 0, DeviceSubClass = 0; DeviceClass = 2, DeviceProtocol = 0, DeviceSubClass = 2; DeviceClass = 2, DeviceProtocol = 1, DeviceSubClass = 2. When I look at the info for the Phone with USB Prober, the class, protocol and subclass are all 0 and it is assigned to the AppleUSBComposite driver which appears to be a default when it doesn't know what else to use.
    Does that information come from the phone or is it assigned by the Mac? I'm wondering if the Mac doesn't recognize the phone and is assigning default values, or if the phone is responding with the wrong values causing it not to be assigned to the right driver. Are there other USB utilities out there which could possibly configure the phone's USB port to identify itself correctly?

  • Where do I change rates for labor and machine hours?

    Hi,
    I have fixed rates for labor and machine hours. Where can i change them? I can't find it anywhere.....

    Hi
    Please check if you can maintain with transaction KP26 per Costcenter / Activity type
    Cheers
    Tim

  • Period is closed for posting or correct document type is not being used

    Hi All,
    I am trying to post transaction in AB01. But i am getting below error.
    I have checked OB52 and the periods for "+" & "A" are open for 2012.
    Error:
    Period is closed for posting or correct document type is not being used.
    Please assist

    document type i am using is AA.check it other side entery documenttype period open or not

  • GL account for excise duty for sales and excise JV

    Hi
    When i did billing in VF01, entry posted:
    Customer A/c Dr. 115
    Sale Revenue A/c Cr. 100
    Excise collected on Sale Cr. 15
    (We can split Rs.15 to BED, E.Cess and SH E.Cess a/c )
    During excise invoice creation, entry posted:
    Excise duty(expenditure) A/c Dr. 15
    Excise duty BED payable Cr. 12
    Excise duty E.cess payable Cr. 2
    Excise duty SH E.cess payable Cr. 1
    Now i want to know where we specify following GL accounts. Do we specify in VKOA or ETT table:
    1. Excise collected on sales A/c
    2. Excise duty(expenditure) A/c
    Please suggest.

    Please go through the ETT GL determination in detail your doubt will get clear.
    In ETT  we put GL for BED, ECS, HSECS (AT1) for payable and receivable through which CENVAT SUSPENSE A/C get triggered through these three accounts. these we maintain in specify excise account per excise transaction.
    Hope this will help you to understand the basic.
    Reward points if helpful
    Tanveer

  • Best bitrate/frame rate for 1080 and 720 HD?

    What seems to be the best bit rate and frame rate to use for
    HD video for best playback on a Mac Mini. Plan on using H.264 encoder
    to be compatible with iTunes,etc. (I like iTunes for consolidating all my media).
    I have downloaded several movies from iTunes, both HD and SD, and they all
    look great and playback smoothly.
    I will be using a 32" Samsung HDTV.

    FWIW, I've been working on a 720p project and have found the "proxy" on the cinema display pretty good for judging focus. We thought we found some material with soft focus and actually took it to a post house to look at the tape on a CRT. It was out of focus.
    If I remember correctly, I think Decklink made an adapter that would allow you to view HD material on the cinemadisplay. Maybe someone else can pipe up with the specifics. Someone else also recently posted this link: http://www.matrox.com/video/products/mxo/home.cfm.

  • I gave the iphone for servis and they gave me back another one used. Is that legal, I gave the iphone for servis and they gave me back another one used. Is that legal

    I gave my iphone for servis and the sailman return to me another one that has been used, without giving more details, telling me that this is the way apple does business. IS THAT TRUE?

    A refurbished until should appear identical to a new unit...you should not be able to tell the difference. If your unit is truly "used"...scratches, signs of use, etc., then Apple's warranty terms were not followed.
    All refurbished units receive new cases & batteries, at a minimum...that's why you can't tell the difference.

  • Sound for messages and e-Mail get turned off after using handsfree in car

    Does anyone have a solution when sounds alerting messages and e-mails are turned off after using the phone in var with handsfree (using Bluetooth)? The sounds are turned back on when restarting the phone but reoccurs after driving in car with handsfree again. This is very annoying when takling several trips with car during a day. The phone still rings when receiving a call.

    I did find a solution to my iPhone-iPod-music-overriding-streaming-streaming-services-while-connected-to-USB problem  Although, this solution is likely only applicable to BMW owners with the BMW Apps feature aka 6NR.
    There may be other/simpler ways, but this seems to work:
    1) Launch Pandora (or could be Mog, or other BMW Apps app) BEFORE you start iPhone/iPod playback
    2) Start playback of Pandora via ConnectedDrive/BMW Apps.
    3) Press Home button on iPhone, launch your streaming app.
    The car still seems to think it's in the ConnectedDrive audio menu, as evidenced by the Entertainment details screen. You can now consistently play back any other audio service via your iPhone without the iPod audio overriding what you're doing. Good times! The only drawback so far is lack of ability to skip tracks via the steering wheel.
    As long as you haven't started iPhone/iPod playback when you get in the car, you can often skip steps #1 and #2, and go straight into the ConnectedDrive menu, then go to step #3.  Either way, following steps #1-3 works everytime.

  • OFM 11.1.1.4 trying to write into jacob.dll, d2kwut60.dll and JNIsharedstubs.dll when these are being used by 10gAS

    Hi All,
    We are working on a 10g Application Server to Oracle Fusion Middleware upgrade project. We currently have more than one application in the 10gAS and the upgrade to OFM is being done one at a time. So, until all the applications gets upgraded to OFM, we will have few applications running on 10gAS and some on OFM. We access these applications through Citrix. The Citrix server has JRE 1.6.0_29 which is used by our 10gAS applications. This is the same JRE version that our future OFM apps will also be using. When we tried to test our OFM upgraded app in our development environment, we found that fusion is trying to update the above mentioned dll files. That said, I have two questions:
    1. What is that Fusion is trying to wirte into these DLL files? Any idea?
    2. Will Fusion changing these files have any impact on the applications that is running on 10GAS?
    I would appreicate your response.
    Thanks in Advance,
    Prathap

    These files are part of WEBUTIL and are downloaded to a client-location as configured in the webutil.cfg -file. If you use WEBUTIL in your 10G IAS, these files are also downloaded there. I guess that for 10G and 11G the dll's are different, but i can't tell you what happens when you have a 1=G and a 11G application running on one client at the same time. I'd suggest you try out a form which uses functionality where one of the dll's is used.

  • Sound drops in iTunes every other song for all speakers when a remote speaker is being used

    Ever since I've run the most recent update for Mountain Lion, Whenever I play any songs from iTunes, and one of my remote speakers is being used by Airplay, the sound volume drops as if muted for all speaker sets that are active, even for the computer speakers.  All I have to do to fix it temporarily is to hit the pause button, then play again and the sound comes back...for about one or two songs, then the same thing happens.  If I only run my computer speakers, the volume stays with no problems.
    Any Ideas?

    Welcome to the Apple community.
    iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
    For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

  • Hi.  I have just started using Adobe Photo Elements 11 and Adobe Premiere Elements 11.  I have many pictures in my photo gallery that I would like to use for a project that I am working on.  I opened my photo gallery and it indicated that I could not use

    Hi.  I have just started using Adobe Photo Elements 11 and Adobe Premiere Elements 11.  I have many pictures in my photo gallery that I would like to use in a project that I am working on.  When I opened the photo gallery it said I could not use the photo gallery because it has not been updated.  Can someone please help me with this...let me know how to do this...or...Thank you,

    BNN, even though I understand what KT is saying, your thought resonates with mine. When it comes to building and maintaining my website, I see myself more as a photographer than as a web designer. Hence, even though Apple may not be actively developing (and we are guessing on this one, arent we) iWeb, the existing functionality should do plenty of good to me for next couple years at least.
    That said, they released a point update a few days back and with the whole cloud thing building momentum and mobile me going for free, why would Apple want to pull the plug on such a fantastic product?

  • Authorization OBject for Delete and Lock indicator in PO function.

    Hiii
    I'm using sap 5.0. I'm notice that we can set the authorization object to control the user from make a action for delete/Lock indicator in purchase order so that we can prevent the 'unpredictable user' from do the deletion on item PO item.
    it also help me to authorize the selected user to perform delete or lock action.

    Hi,
    To prevent deletion or locking in specifically may not be controlled thro authorisation but changing the PO can be controlled.For this the authorisation objects M_BEST_BSA, M_BEST_EKG,M_BEST_EKO,M_BEST_WRK  may be looked into .Here against Activity there is option like create,change ,delete,print etc which if suitably assigned can restrict the users for certain activity.Try with your basis team in this objects.
    Dhruba

  • I have an iPad 2 with verizon 3G. I'm moving to Spain for school and I'm wondering if I can use 3G in Spain with a Spanish cellular plan?

    Im moving to Spain for school. I have a 32gb wifi+3G (veizion) iPad. Can I use the 3G if I switch to a Spanish cell provider when I'm there?    

    The US Verizon iPads are CDMA based and don't use micro-sim cards, and I'm not aware of any carriers in Europe that are CDMA based. You could get a mifi device (which use sim cards) and use that as mobile hotspot for the iPad.

  • Click on a link in Outlook 03 message, the "locate link browser" dialogue pops up until I cancel it. The only info on the web is for xp, and the tab they tell you to use does not exist in Windows 7. Tried suggested reg edits for Vista, they don't work.

    Your site is stupid. I cannot find my question asked before and it keeps limiting my question until I can't ask it.

    This is what does not work, its the same instructions I am referring to in my question, if you noticed. I tried all that but reinstalling, which I will try now. (Update: that did not work either). There is no "file types" tab in Windows 7, and I did the registry edits, nothing worked. This is a tired old answer from years ago, and simply does not work with the newer versions of the OS and Firefox. Thanks for trying, but I searched before I posted my question. This only started with Firefox 7 upgrade.

  • HT204370 Purchased tinker taylor soldier spy in HD and was charged for that and also in its normal format

    Tonight i purchased tinker taylor soldier spy in HD and i have been charged for that film and for the same film but in its normal format. Any help in this would be great

    You should ask your question on the Final Cut Studio forum.

Maybe you are looking for

  • How can I transfer everything  from an apple ID to the next

    First I had my frist apple ID, but then It said when I bought something that I needed to answer security questions, and it says my answers are wrong. Is it possible to transfer the apple ID, music anvd videos and all that to the next??? Sincerly Lell

  • MSPS 2010 Issue and Risks Alerts

    All, We are using MSPS 2010 with June CU Update. Is there a way to turn on "automatic Alerts" to the "Assigned To" person when an issue/risk is assigned to that person on a Project Site? I know this was not possible in Project 2007, and the options w

  • Single billing document

    Hi      Inspite of having maintained same BP,PY, Payment terms, billing date I could not create a single billing document for two different orders. In split analysis, the information is split on the basis of sales orders. Where is the setting I need

  • Taking tooo much time  when using FM REUSE_ALV_HIERSEQ_LIST_DISPLAY

    Hi Guys, I  using  FM REUSE_ALV_HIERSEQ_LIST_DISPLAY in my report , In my internal table   more than 200000 reords are there when  was displaying it , taking tooooo much time plz advice me how to over come it Thanks, Prasad.

  • P6 and Bar Code Schedule

    I'm in the process of converting P3 to P6 and need to create a P6 schedule with bar codes in the gantt chart area. Is this possible at all? If not, does anyone have a work around?