No rear speaker sound with Audigy 4 and Vista x64

I recently upgraded to Vista x64. I downloaded the 6.0..24 driver for x64. I also loaded MediaSource for x64. I am using analog 5. surround speakers from Dell. This setup works fine when I boot into XP pro (with the XP drivers), but I only get front, center and Sub in Vista x64. Does anyone have any ideas for this?

Not sure what to tell you, hopefully someone will be able to help. One curious thing though is that according to my Sound properties in Control Panel SPDIF is working on my Audigy 4,
<center>
http://i0.photobucket.com/albums/a7/stormy352/th_spdif.jpg">
</center>
unfortunately I don't have anything that uses SPDIF to be able to test it.
Also have you tried installing the X-Fi drivers yet? Download, extract with Winrar (or whatever you use) and navigate to the Drivers sub-folder and run the Setup.exe there.

Similar Messages

  • Getting static audio with Titanium and Vista x64 at random times

    @Getting static audio with Titanium and Vista x64 at random times$ I have had this card for about 6-8 months and relati'vely no issues.
    I just upgraded to the latest drivers 270006 and now, sometimes after exiting Turbine's Lotro, my audio plays but is very static-y, but it doesn't happen all the time. I had iTunes minimized when playing Lotro and then went to play a song after exiting. I quit iTunes and tried it again and it was ok.
    This also happened in Firefox, a YouTube video had the same static audio.
    It doesn't happen all the time and I do play other games, but I haven't been playing much else right now.
    So right now I don't know if it's a Lotro thing or just the drivers.
    I have a Q9650, single GTX260, Asus P35 board (not SLI), Vista x64, 4GB.

    Carl, do let us know on the Safe Mode test... would be the first thing I'd try with what you've mentioned, but yeah, daisy chained Hubs could possibly play into it.

  • No speaker sound with itunes and media

    The speakers on iphone 4S work fine for all activities with the exception of itunes and video. Speaker phone works; notification works; ringer works. Everything works fine with the earplugs and bluetooth and volume can be adjusted. Speaker works just fine with calls, recordings etc. Just not with music and video apps. Any thoughts?

    rjom wrote:
    I did not realize my response by email would be posted on the forum.
    >Personal info deleted<
    To send a Direct (Private message) Message follow the instructions in the link below:
    How To: Direct Message
    Message was edited by: Verizon Moderator><
    In every email notification of a message on the community forum there is a few lines of text with hyperlinks to the post in the community. The text is written so to let you know you are receiving this email from the community and you would be replying to the community. The text as written is "Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community. Start a new discussion in iPhone 4 by email or at Verizon Wireless Community”. Only the hyperlinks didn't carryover from copying.

  • How do connect to internet with Leopard and Vista x64

    After installing Leopard, then running Boot Camp and installing Windows Vista x64 I cannot connect to my router, either by Ethernet or Airport. Windows could not detect any wireless network when trying to set up a wireless router. When I try to connect to the router with an Ethernet cable I get an error message telling me to "The underlying Ethernet connectivity required for the broadband connection was not found. Please install and enable the Ethernet adapter on your computer via the Network Connections folder before attempting this connection. I know the router and the MacBook Pro are working because I can connect either with Ethernet or Airport when I am running Leopard. The router is a D Link WBR-2310.

    It happened to me as well on Windows XP. I managed to get it to work by changing WEP password on the Airport to WPA/WPA Personal. It seems Windows is finicky about WEP set ups...

  • Problem with standby and Vista

    Hi!
    I've a problem with my X61 with the Turbo Memory and Vista x64: When I install the driver for Turbo Memory, I cannot resume from standby. The notebook does only a "normal" reboot.
    Can anybody help me with this problem?
    scw

    well after a lengthy talk with many microsoft reps i found something. I was an updated version of this "WUDfrd.sys" file. But the problem was that i could not see a download link. but after a little while i convinced microsoft to give it to me. at first it looked like it had potential but after i restarted, every went down the plug hole. here is the link that i was talking about.
    http://support.microsoft.com/kb/933607/en-us
    problem still not solved and not looking to be solved for a long time by the looks of things.... NOT HAPPY JAN!!!

  • My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps.  How can I correct this?

    My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps.  How can I correct this?

    If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
    Close all apps completely and reboot the iPad.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Sound Blaster Audigy and STAL

    I've got the following problem. In game called "S. T.A.L.K.E.R" i can hear very lound sounds of shooting and very silence people conversations.
    I've got "Sound Blaster Audigy" and Creative Speakers.

    Hi,
    There are several choices if it comes to Audigy (emu0kx) drivers;
    First you can use the last official Creative Labs' driver for the Audigy series which you can download on the official driver download site here at Creative Labs' site, but you will loose a lot of apps/softwares, but it should work;
    The second one would be the mentioned Daniel_K's driverpack 3.8 for the Audigy series which works pretty good, although I dislike the individual installers/uninstallers for each applications which makes uninstallation of the driver very annoying.
    The third one would be the Project KX driver which is very light in size but very powerful, especially for recording and other music related purposes. There's a learning curve since it really looks different (interfaces for example), but once you have found out how the KX driver works you will be happy you own an genuine Audigy emu0kx soundcard.

  • No sound with apps and alerts unless headphones are in. Everything else works well. I tried resetting but it didn't solve problem.

    No sound with apps and alerts. Everything else works. Tried resetting, didn't solve problem. Apps have sound with headphones only

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

  • Unibody MacBook Pro 17, SSD and Vista x64 - Does it work?

    I see many discussions about problems with various brands of SSD drives and Vista x64 under Boot Camp.
    Can any of you confirm that Vista x64 will install on a unibody MacBook Pro 17" with the Apple-provided 250g SSD option?

    It works well. Don't forget to turn the disk defrag off after installing and booting into Vista.

  • Distorted / choppy recorded sound with Audigy 2 ZS and Vista 64-bit

    Hi, I wonder if anybody has any idea of why this issue is happening. First let me give you my PC specs:
    CPU: AMD Phenom II X4 940 @ 3.0 GHz
    Mobo: Gigabyte GA-M57SLI-S4 rev. 2.0
    Graphics: 2 x BFG GeForce 8800 GT 52MB
    RAM: 4 x GB G.Skill PC6400 @ 800 MHz
    Sound: Creative SB Audigy 2 ZS
    TV Tuner:? Hauppauge WinTV PVC PCI II (26xxx)
    OS: Windows Vista Ultimate 64-bit SP
    ?So here's the deal. I have no problems whatsoever with audio playback with this sound card. The issue I am having is while recording sound with it. When I record my voice via a Microphone with the Windows Sound Recorder and then play it back, my voice sounds very choppy. It sounds as if I was talking in front of a fan. The same happens with any program I try to use. If I use Audacity to record sound, the playback is also distorted / choppy. The main problem is with Skype, as I cannot use it to talk to people because they cannot understand what I'm saying because of the issue. Does anybody has any ideas why this happens? My PC is a dual boot PC with Vista 64-bit and XP 32-bit, and this issue only happens with Vista. Sound recorded plays back fine under Windows XP.
    I am using the latest drivers available for this card from the Creative site.
    I'd appreciate your help,
    Daniel

    StormPetrel wrote:
    A little bit off topic here, but 64bit does not mean more performance at all lol.
    Sure, but there are in some cases drastic performence diferences. Under a fresh installed Vista X64 i have less CPU usage, as under 32 bit. But of course X64 uses more RAM (some tasks are double 32 and 64 bit).But the main reason I have more performence is, that the games I often play, get almost a boost. Dont ask me why, but under 64 bit EAW and FOC have the same FPS as under 32 bit. But under X64 I use a bit more Details and a higher resolution. (both are 32 bit games, so its a bit funy )?______________________?Sure there are other ways to install the drivers. But if some Setup dosent work, the first thing I try is to get it via Divice Management. And as this worked for me, I dont waste time to try other methods (Had bad experience, you can break the driver faster than install it *G*)?______________________?Some Questions I have left (after a few hours undr X64 with Creative Drivers):?Could it be, that the driver causes sometimes havy CPU usage?Could it also be, that the driver causes some lags, after you copy a file (the end sound, copy is finihed, but takes more time for "final finish", than without the drivers) - I know that Vista has some problems, on some PCs with copy, and that MS has an inoficial Patch (but dosent help for my PC so far)

  • No Rear Speaker Sound, not possible to change setting to

    Hey, I hope anyone of you can help me please.
    A week ago the sound from my to rear speakers stoped working. I can still hear sound from the center, sub, and the two fronts. I've tried to change the settings in my AudioHQ but i can't switch to 5. nor 4 speaker setting., I can't change anything. I've tried to reinstall the hole thing with my CD, but when the CD try to load it just says "Cannot read file (autorun) ..." I get two choices; close or ignore. :angry:
    Aha, I thought, no help there either so I surfed on to Creative.com and found the AutoUpdate-or-whatever-it-was-called-thing but it didn't work... I downloaded a "Disc Detedtor Patch" for a Autorun problem and guess what.. It didn't work. I tried to download new drivers but to be able to install them i needed somthing called something..umm..AudioInstaller?(for installing new drivers) but to be able to install them I needed the new drivers installed already.. catch-22 situation. :smileyindifferent:So now I'm stuck with just three speakers and a sub.
    Someone, please help me!
    /sebbel

    I forgot to tell I've a Sound Blaster Audigy Audio C800.
    thx again

  • Distorted user sounds with Audigy BETA driv

    Not sure where to post this except here - let me know if there's a better place.
    I installed the Audigy BETA drivers to use with my Audigy 2 ZS Platinum Pro and Vista Premium 32 using the 4. output with CMSS.
    I found that the system sounds worked fine but the wavs that I added myself - "You've got new mail" etc - distorted heavily.
    After spending some time on this I found that the "cause" was that Vista's built-in sounds are all recorded in stereo and the wavs that I was using were mono. Editting the samples to create pseudo-stereo (I used Audacity) solved the problem.
    I thought that this might be useful info if anyone else has the same problem.

    I have this same problem with the beta drivers and I am using X-Fi Xtrememusic. All my mono desktop wavs are distorted. Even my Xfire "Click" to let me know a friend has signed on is all static (must be a mono sound as well) What gives Why would Mono files cause this static
    Just to add a note: These same files will play fine through the Windows Media player.
    Another Note: The Text to Speech feature must be in mono, because this is also distorted. People that leave and enter my vent use the TTS and it is all distorted. Any way to make this stereo Or do we know why mono would be distorted
    Message Edited by Boz968 on 07-2-2008 10:14 PM

  • [SOLVED] no sound with audigy 2 after kernel 2.6.26.2-1 upgrade

    Hello
    today i upgraded my system with pacman and after reboot my audigy 2 stopped working... i read that many have problem with the kernel upgrade...i think it's my problem too... So what can i do?
    thanks in advance...
    Last edited by kcr (2008-08-12 09:28:42)

    sorry, you're right...
    1) these are the package that pacman updates today:
    [2008-08-11 10:36] upgraded kernel26 (2.6.25.11-1 -> 2.6.26.2-1)
    [2008-08-11 10:36] upgraded klibc (1.5-5 -> 1.5-6)
    [2008-08-11 10:36] upgraded klibc-extras (2.4-1 -> 2.4-2)
    [2008-08-11 10:36] upgraded klibc-kbd (1.15.20080312-5 -> 1.15.20080312-6)
    [2008-08-11 10:36] upgraded klibc-module-init-tools (3.2.2-3 -> 3.4-1)
    [2008-08-11 10:36] upgraded klibc-udev (116-3 -> 116-4)
    [2008-08-11 10:36] upgraded lirc-utils (0.8.2-1 -> 0.8.3-1)
    [2008-08-11 10:36] upgraded man-pages (3.05-1 -> 3.06-1)
    [2008-08-11 10:36] upgraded tzdata (2008d-1 -> 2008e-1)
    2) no error messages at all;
    3)no crash, only no sound...
    thanks...

  • P1006 - networked with XP and VIsta-64 not printing more than 2 pages

    Hello - I have a dilemma with my HP P1006.  I have the printer directly plugged in (USB) with my XP (32bit) PC.  I have a Vista-64 PC networked with it.  Both (XP-32 and Vista-64) are plugged in directly to the router (not wireless).  My question is why can I not print more than two pages at a time with items opened on the Vista-64 PC?  I CAN print more than two pages with items opened in the XP-32.
    Things I've done:
    1 - uninstalled everything & reinstalled the latest drivers for the XP-32.
    2 - marked the printer as "sharing" on the XP-32.
    3 - confirmed the printer is marked "enable bidirectional sharing" under the printer properties on the XP-32 PC.
    Things I perplexed about:
    1 - why won't items (docs, webpages, etc.) print more than two pages at a time from the Vista-64 PC?
    2 - is there any reason that I should download a driver for the Vista-64 OS? If so, which PC do I download it to?
    3 - I have another printer (Lexmark inkjet) connected in the same way (except it is a serial port not USB) and it can print more than two pages of a document at one time with no problem from either the XP-32 or Vista-64 PC?  Why?
    Any thoughts on this situation?  Any suggestions are greatly appreciate.
    Thank you - Jane.

    Hi!
    I just get a system message at teh bottom of teh screen saying "output cannot be issued " and it remains on teh same screen . I goto t-code va23 and enter my quotation number and on the top I select sales document ...issue output and select my output type and print preview or prnit , it comes out of that screen into the first screen and at the bottom gives msg "Output cannot be issued". I beleiev its not allowing the smartform to display when there are more than 2 pages , because I tried it with a contact which has 2 pages and it shows output but when I try with the one having more items i.e more than 2 pages it comes out of it . Its a smartform issue and something in the smartform is causing problem I beleive.
    Thanks

  • [Solved] Sound with ALSA and PulseAudio at the same time?

    Hi, I am using arch linux to play Counter Strike on.
    While it works fine and all, I just don't get any sound in CS because I am using Mangler, which only seems to work with my microphone if I use PulseAudio.
    I hope this is a rather simple issue, basicly, I just want to enable sound in PulseAudio and ALSA at the same time, is this possible?
    Last edited by Paaskehare (2010-08-12 15:39:09)

    I have read that PulseAudio decreases sound quality, and therefore I would not like to use this as a systemwide driver, but rather only where it is needed.
    Please correct me if I am wrong
    Edit:
    Ok, sound quality isn't noticeably worse, so this will do. HOWEVER, while I am in Counter Strike my sound is delayed by ~1 second, and it is therefore useless, any thoughts on that matter?
    Edit again .. Solved this time:
    I set my ALSA plugin in winecfg to "Hardware Acceleration: Emulation" - that seemed to do the trick.
    Last edited by Paaskehare (2010-08-12 15:38:56)

Maybe you are looking for