No rear speakers with quicktime update

Once I updated quicktime about 3 versions ago, I can't seem to get the rear speakers to play with videos. All four speakers work fine with music and any other file but just not with movies.
Anyone have similar problems and know how to fix this? So far I've just been reinstalling the old version which is a bit of a pain since everytime I update itunes it automatically installs the new quicktime.
I'm using a Dell 5100 with windows xp and a Sound Blaster Audigy 2 ZS card

Try installing the latest version of iTunes (7.0.1.8) from Apple's website. It fixed this problem for me although QuickTime is still showing version 7.1.3.

Similar Messages

  • Problems with Quicktime update

    I just downloaded the latest Quicktime Update and then opened FCP 5 on my PowerMac G5 with 4 GB of memory. I can't do anything. I have 80GB of space on my hard disk plus a couple of Firewire drives attached. If I click on Preferences and anything else on the menu bar it takes forever (I actually give up) before I'm given a drop down menu. Is this a Quicktime Problem?

    Hmmm. I don't have an answer to that, but I just installed the latest Quicktime Update last night on my TiBook 1Ghz and after the restart my airport will no longer auto-connect to my wireless network. I have to connect manually now. I don't see how the two would be related, but that is the last thing I did before things went bad!
    Any help would be appreciated.

  • No sound in rear speakers with Sound Blaster Li

    I have a Sound Blaster Li've sound card.. In win98 with older drivers it was possible to set the card to 5., but now (in winXP and newest drivers) there are these thrre optins: headphones, 2 speakers and 4 speakers... I use digital output and I have 5. speakers. I can li've with only 4 speakers but it does not work very good.
    When i press the test button i hear the front left voice and the front right voice correctly in the front speakers, but i hear both voices in both rear speakers. But then the test is supposed to say rear left and rear right, but there is no sound. My receiver is a Harman/Kardon AVR 550 and is set to dolby pro logic and 5. speakers.
    How do I solve the problem!

    All,
    Are you using the Li'veDrvUniPack from our website or using the default Windows Driver? If you are using the default driver then there will be limitations. You will need to install the complete Li'veDrvUni-Pack from our downloads section to get 5. if you have a Li've! 5. card.
    Jeremy

  • Get Sound From Rear Speakers with X-Fi XtremeMusic card

    Have the SB X-Fi XtremeMusic soundcard combined with the Digital I/O Module so i can get digital sound through my 6. Sony Amp. I have the Digital I/O module connected to my amp via a Coaxial cable. I have set the speaker set up to 6., and have run the channel test in the Creative Console Launcher. Now heres the problem im having, i get the correct sounds coming from the front left, center, and right speakers, but when it tests the rear left speaker, the sound comes from the front left instead on the rear left, for the center rear the sound comes from the front center, and for the right rear the sound comes from the front right speaker. Can someone tell me how i get the correct sound come from the rear speakers please?

    The Xbox encodes the sound on the fly to form a DD stream. No PC game encodes DD by itself, even when the game is DD certified it needs a soundcard capable of encoding it, like the soundstorm on the nforce2. If your receiver supports analog inputs use them, the DD compression would probably degrade the sound at least to the same degree than an analog connection.

  • Rear speakers with flash plugin no sound

    Anybody know how to get sound out of rear speakers when using
    the flash player plugin? I've searched online and some people have
    the same problem but nobody seems to have any answer.

    All,
    Are you using the Li'veDrvUniPack from our website or using the default Windows Driver? If you are using the default driver then there will be limitations. You will need to install the complete Li'veDrvUni-Pack from our downloads section to get 5. if you have a Li've! 5. card.
    Jeremy

  • Help With Quicktime Update Download Issue?....No DMG format? Only Windows?

    I just got the new Final Cut Studio updates, but when I tried to install them for FCS 2, it asks for the 7.3 Quicktime? When I went to the Support section for downloads and tried to download for OS X, its only gave me the option to download for Windows XP? or Vista? I need a link to one of the proper pages to download the QT DMG 7.3, please help? Thank You Tim C.

    Apple uses a "browser detect" to determine what type of OS is being used and redirects to that version download page. If you're using Windows to visit you'll only see the Windows download.

  • How to get sound on rear speakers with vis

    ?I found, on very obscure intructions, how to enable surround sound on vista 32 and 62 bit drivers.
    ?Do not install the disk that came with the sound card, if so, then uninstall. Then use (only) the vista drivers for vista 32 bit or 64 bit. The disk, and the drivers on this website, together installed?won't work.
    ?Then?click Start,?then go to?programs then creative. There in the controll panel select xifi-cmss 3d. Under stereo envelopment put 50% that equals the sound between front and back speakers. and that's it. It worked 00% for me, it might work for you.Art.

    after having slept a couple of hours and read about a bit about pulse and jack the general feeling I get is that they cause people trouble.
    Understanding how to write a good .asoundrc seems to be the best option, but a bit complicated. Since I didn't actually want sound from both cards, but merely a simpler way to switch, I've given up for now. I wrote a simple script to do it for me, and running that is actually simpler than fiddling in alsamixer, finding and muting/unmuting channels/cards
    I don't feel I've solved the issue, since I didn't get what I asked for (sound from both cards at the same time) but I have what I want (a simple way of switching) and I know where to look (finding out how alsa handles virtual cards, setting one up and send all sound that goes there to my actual cards or configuring pulse/jack this thread was sort of helpful as it begins to explain a .asoundrc) if I feel a need for it in the future.
    Thanks anyway for all the help. After 4 years of Arch use (and more then I can remember on linux) I still feel like a noob sometimes. It's good to have a community.
    here is my, almost, solution
    #!/bin/bash
    #creating or uncreating the .asoundrc config file by renaming it
    if [ -f $HOME/.asoundrc ]
    then mv -v $HOME/.asoundrc $HOME/.asoundrc-no-use
    echo "this should give audio to your speakers"
    echo "more specificly, audio from the motherboard (default) soundcard"
    elif [ -f $HOME/.asoundrc-no-use ]
    then mv -v $HOME/.asoundrc-no-use $HOME/.asoundrc
    echo "this should give sound from the HDMI on the graphicscard"
    else
    echo "this script doesn't do your setup"
    fi
    #restarting alsa is needed to read(or not find) the .asoundrc config file
    #and to do that you need privileges
    sudo /etc/rc.d/alsa restart
    exit 0
    combined with
    ~/.asoundrc
    pcm.!default {
          type hw
          card 1
          device 9
    Last edited by openess (2012-08-18 20:08:26)

  • Any problems with QuickTime update?

    My QT has stopped working viewing videos on websites. I have attempted to download both the 7.3 and 7.4 version. After many attempts, I always receive the message "an unexpected error has occurred during installation." Does anyone have any suggestions to fix this?
    Thanks

    Repair permissions & restart your computer.
    Reinstall QT, repair permissions & restart again.
    "My QT has stopped working viewing videos on websites."
    Make sure you have the following installed:
    Flip4Mac
    VLC Media Player
    Perian (AVI and FLV support)
    Repair permissions & restart after the above installations.
    If still having issues, then please post the URL/link of the video sites you are having these issues.

  • Why no sound from rear speakers (Xfi X

    Vista 32bit, CMSS enabled, why no sound from rear speakers with music? XP no problem at all, only in Vista. Using latest drivers (v2.5.0004).
    I realize I'm hoping against hope to get a useful answer at the Creative forums, but I do believe in miracles and the odd one happening once or twice in a lifetime, lol.

    Well, I think I have an answer, from Catherina-CL's Audio in Windows Vista post. 2.The Vista audio architecture changes the way per-stream audio processing works, which required us to write new software to support this
    Issues that may be encountered:
    CMSS no longer works on audio streams from the OS.
    Status:
    Features based on Windows XP architecture must be rewritten to conform to the new Vista architecture, and we have a team of software engineers, project managers and testers dedicated to this task in order to provide our customers the same seamless audio experience under Windows Vista that they enjoyed under Windows XP. However, I found a somewhat crappy solution, at least with my old Altec Lansing 4 speaker/ subwoofer system. Unplug the surround cable from your subwoofer (unplugging it from the card itself has no effect). That at least will make all the speakers work, even if it's not true surround. Good for listening to music loud.

  • Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When

    Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

    Two previous questions may not have been as clear as I would have liked. I recently upgraded my MacBook 2008 (10.5.8) to Snow Leopard (10.6.8). With the updates came iTunes 11.1.1 and Quicktime 7.6.6. I am still using Garageband 2008 and iPhoto 2008. When I create music in Garageband I usually adjust the volume and save it. Even now when I share the Garageband created files with iTunes 11.1.1, the volime I previously set in Garageband is retained. However, when I use the music to create a slide show in iPhoto 2008 and export to Quicktime 7.6.6, the volume level I previously set is lost and seems to default to a low level. The problem seems to be either in the slide show export from iPhoto 2008 to Quicktime 7.6.6 or in Quicktime itself. Is there a work around, so that I can retain the volume level I had previously set in Garageband, a volume level that seems to transfer without problem to the new iTunes. But then iPhoto 2008 (slide show) possibly or Quicktime 7.6.6 do not cooperate. Before I did the upgrade to Snow Leopard, the new iTunes and Quicktime I had no problems with the set volume being retained in the old Quicktime. The reason I need control over the volume is that all these music files are uploaded to YouTube.

  • Problem with Rear Speakers (Inspire P5800)

    Hi,
    I have bought the Inspire P5800 Sound System but I have a problem. When I do a soundtest with the driver software all speakers work but when I want to listen to music with Musicmatch Jukebox I don't get any sound on the rear speakers. I have on board AC97 sound on a Gigabyte K8NS motherboard.
    Can anybody help me?
    Thanks!
    robertthronhill

    robertthronhill,
    That's normal as music are mostly in stereo and that's 2 channel only. Creative sound card have CMSS feature that upmix stereo to surround soundfield but since you are using onboard audio, you will have to check with your mainboard manufacturer if those audio card have similar feature also.
    Jason

  • Can Quicktime Updates interfere with saved iMovie projects?

    Hello.
    I'm just about to do an update to the latest Quicktime and I wondered if these updates can cause any problems with iMovie projects that have been made and saved on my computer with older Quicktime versions?
    Thanks
    Rich

    Thanks Bengt,
    But how about after a project is fully completed and burned to DVD but still remaining stored on the computer as a final iMovie project. In case you want to burn it again or just play it on the computer, will that original iMovie on the computer be confused by a newer Quicktime Update? I have all mine still saved as both disc images and also the original project. I know a disc image will not be affected but I was curious about the original project?
    Rich

  • HT1926 I received an ITunes and Quicktime update notice on my Windows 7 PC, from Apple this morning. During the update installation, RealPlayer installed. What gives? Why is Realplayer installing with the Apple software.

    I received an ITunes and Quicktime update notice on my Windows 7 PC, from Apple this morning. During the update installation, RealPlayer installed. What gives? Why is Realplayer installing with the Apple software.

    Thanks for the reply. I went back to check if there was a history in windows (Event Viewer) but could not locate it in Win7. The only updates that were in the Apple Updater window were the Quicktime and ITunes. Had I let the Realplayer continue on its own, it would have installed the Google Chrome and other apps. I let it finish installing and then removed the entire program. I do not remember checking or seeing anything saying that realplayer was being downloaded until after a reboot was requested from the ITunes Update Installer.
    I just thought it was strange since I do not use Realplayer and have not downloaded any software for it.
    I am on a corporate PC with a pretty thick firewall, but something may have slipped through.
    Thanks again for the assistance.

  • Problem after update to Mountain Lion with QuickTime

    Hello! I have a Macbook Pro early 2011. After updating to ML i have a problem with QuickTime player 10.2. I cant open any video with this player. For example i also have flip4mac + perian and i cant play an avi file. Specifically, i can open but it doesent play. I click to play button, but nothing works... I can see image but doesnt play normally.
    But the most strange is, that i cand open also a .mov (quicktime file).. I export a video from my Aperture Library, and when i press play, the video plays ,but i cant see anything... only black screen. The video plays normally within aperture app..
    Quicktime player 7 is ok... but QuickTime player 10.2 doesnt work.. why?

    Is the time capsule the only router in the network?
    Try setting the lease time in the TC to very short value.. 20min or even less, 10min. It will not add signficant network traffic but might keep the Air updated to the TC.
    I would also use SMB compatible name for the TC as well as wireless.. ie short, no spaces.. pure alphanumeric.
    Set a different name for 5ghz so it cannot swap around.
    And lock the wireless channels. Try each channel in turn, to see if any are better.

  • I drive a PowerBookG4 (10.4.11) with QuickTime (7.6.4). Need either update of QuickTime or alternative software. Any thoughts. Help

    I have a powerbook g4 (10.4.11) with quicktime player (7.6.4). Most internet media play in fits and starts -- not smooth -- no doubt due to the age of my computer and/or quicktime. I can't afford a new computer so need either a software update of quicktime or download of an alternative app that will play smoothly on my computer.
    Help.
    (And thanks)

    If the difficulty is with streaming video off the internet, the PowerBook is the wrong computer. While still strong in many respects, streaming video, in some cases requires an Intel processor, and in other cases just won't play smoothly. This is, unfortunately, not a new issue.
    One option you might try is to sign up for Youtube HTML5 video. With OS X Tiger and Opera 10.6 you can see if HTML5 delivery of video works better for you. Go to http://www.youtube.com/html5 and Opera can be downloaded from http://www.opera.com/browser/download/?os=mac&ver=10.61&local=y
    In terms of an alternative app to play video, you might try VLC at http://www.videolan.org/vlc/download-macosx.html

Maybe you are looking for