"No receiver agreement found" for BPM ???

Hi everybody
I think this could be an issue in the cache. I have a ccBPM and when I am sending the message who starts the BPM to the Integration Engine I got the following error:
<SAP:Stack>No receiver agreement found for sender -BS_SQL_Database to receiver -IP_ScanningStatus_01,http://xxxx.com/common/scanning.MI_JDBC_Response_Asyn_ABS</SAP:Stack>
IP_ScanningStatus_01 is an integration process and you do not need a receiver agreement ("not required" in receiver determination) to send a message to an integration process. Two weeks ago the process work and the very strange is, that in sxi_cache it shows the 31.07.2006 as last change/activation, but I did an activation yesterday. A full cache refresh did not change anything and the status of the cache is "up to date". We are on SP14 (:-<)
Regards Oliver

Hi Udo
yes, that is exacly my problem.
I deleted the corresponding processes in the repository and in the configuration. I recreated the process in the repository under the same name and after that I tried to import the porces in the configuration under the same name, but now I got the following error:
Unable to transport object Integration Process IP_ScanningStatus_01 | http://xxxx.com/common/scanning (CE_ONESAP_ACETATE_MFG_xx, 1.0 of celanese.com) of type RepBProcess from application REPOSITORY on system REPOSITORY. Detailed information: Attempt to serialize the generic part of object Integration Process IP_ScanningStatus_01 | http://xxx.com/common/scanning failed(serialization problem)
Any Ideas?
How can I delete the old process out of cache?
Regards Oliver

Similar Messages

IDOC to FTP File - Error : SAP:Stack No receiver agreement found for send

Hello Friends,
I need to configure a senario Idoc to FTP File, Í did required settings in R3 and in PI... , did mapping and configuratino in PI... and when I send my idoc I got error msg in monitor
<SAP:Stack>No receiver agreement found for sender ,BMG_ASN_File_Component to receiver ,GTN_224,http://adis-bmg.de/asn,SI_BMG_ASN</SAP:Stack>
I search the fourm but did not got my answer, me just a bit confused...
In my senario I have having followings:
1. Bussiness System ( RFT : sender R3 system). ( I have define a party and make a connection under Idoc Partner )
2. Bussiness Component ( ZTEST_COMP as on Reciever side is File Server, so I define the reciver as bussiness component )
3. Communicatin Channel
    File with protocol FTP having communicatin component as my Bussiness Component ( reciver ). there I defied the required info for FTP
4. Reciever Determination
    Sender:
    - RFT
    - Idoc-Interface
    - urn:sap-com:document:sap:idoc:messages
   Reciever
    communication party = space
    communicatin component = ZTEST_COMP
    Configure Reciever:
   There I again define the communication component as ( ZTEST_COMP)
5. Interface Determination
    -RFT
    - Idoc-Interface
    - urn:sap-com:document:sap:idoc:messages
   Reviever:
    ZTEST_COMP
and define the mapping which I did in design ( although I have seen some threads where mentioned we dont need maaping in this case ) ?
6. Reciver agrement
sender:
- RFT
Reviver:
- ZTEST_COMP
- SI interface ( SI_BMG_ASN )
- http://test-etc.de/asn
and included my CC for file .....
Now when I send Idoc I got error msg that Reciver is not found : am I dong something wrong ? do I have to defien a bussiness system instead of Bussiness Component ?
Pls suggest...

( I have define a party and make a connection under Idoc Partner
Do you really need a party in your communication? Should it not be a partly-less communication.
In the receiver agreement ensure that you have included the inbound message interface.
communication party = space
No need to give any space.
In the Interface Determination i hope that you have included the receiver meessage interface and then the corresponding Interface Mapping.
If still not works then make some dummy changes and again activate....correspondingly check the cache status of the ID-objects
Regards,
Abhishek.

CO_TXT_OUTBINDING_NOT_FOUND and No receiver agreement found for Sender

Hi,
I had imported an RFC in to two different SWCV. In ID I'm able to see the RFC interface listed under one of the business systems but not in the other. Please help me out with this.
When i tested the scenario i got this error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>-WB_APDRP_DEV_ISU_200</SAP:P1>
<SAP:P2>-WB_APDRP_DEV_CCC,urn:sap-com:document:sap:rfc:functions.ZPI_CONSUMER_PAYMENT_BILL_DATA</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver agreement found for sender -WB_APDRP_DEV_ISU_200 to receiver -WB_APDRP_DEV_CCC,urn:sap-com:document:sap:rfc:functions.ZPI_CONSUMER_PAYMENT_BILL_DATA</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I cleared the cache using SXI_CACHE and http://Server Name:Port/CPACache/refresh?mode=full and still got this error. Can someone explain me about this..
Regards
Satt

Hi ,
This error generally Comes when aggrements are Not There in ID.
1. Check if all the Objects in ID are activated.
2. First test your Configuration Objects IN ID Only ( Tools - test Configuration )
if this gets Successful , Please tell...
Regards
Prabhat Sharma.

No Receiver agreement found for Sender

Hello,
I have a scenario like this : sending an IDoc from R/3 4.6c to R/3 4.7 through XI 3.0.
I am struck up with the follwoing Error in SXMB_MONI
"outbound binding exception: No outbound binding found for , R46, , ENT, urn:sap-com:document:sap:idoc:messages, ORDERS.ORDERS04"
The Complete TRACE is as follows:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag X</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPR46</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-SET_IDOC" />
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
- <Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA">
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-ITAB_TO_BINARY" />
</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XI3</Trace>
<Trace level="1" type="T">client = 800</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = SMART01</Trace>
<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = F0EAB201EEA5F74A814EF22C32394FD0</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0009</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0009</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI3</Trace>
<Trace level="1" type="T">client = 800</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = SMART01</Trace>
<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO____0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XI3</Trace>
<Trace level="1" type="T">client = 800</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = SMART01</Trace>
<Trace level="1" type="Timestamp">2004-12-27T20:08:46Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">No mapping required</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="CL_IDX_IDOC_RESOURCE-GETBLOBDATA" />
<Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="1" type="T">processing the outbound binding</Trace>
<Trace level="1" type="T">search outbound bindings</Trace>
<Trace level="1" type="T">outbound binding exception: No outbound binding found for , R46, , ENT, urn:sap-com:document:sap:idoc:messages, ORDERS.ORDERS04</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
I have made neccesary Configurations for the Receiver agreement in the Configuration Directory...
Anybody could please help me out...
Regards,
Romit Arun Shankar

Hi Frank,
Many Thanks for your reply.The problem got sorted out and the IDoc(ORDERS04) which i send in SAP 4.6c gets into SAP 4.7 AS ORDERS04 but i have a new problem now....
I didnt use any mappings until now...but now i have to have the segment E1EDK14 filled up for Sales organisation, Distribution Channel, Division details as well as the material number. These segments will not be filled up when a PO is sent from the source system.These segments has to be filled only in the XI system...Is it ? or is there any other solution for it....
Now how we can have this segment E1EDK14 which can occur any number of times with constant values for SORG,DV,DC in the mapping process....
Waiting for ur replies....
Bye,
Romit Shankar Arun.
For this

Error in BPM (No receiver agreement found from sender to bpm)

Hi all
In a simple bpm scenario, I am getting a error that No receiver agreement found for sender service to bpm integration process.
What might be the reason?

your configuration should like this.
say u are doing File to File using BPM
File to BPM
then BPM to File.
so u need to create RD where sender is fileservice and receiver is BPM.
second u hav to create another RD where BPM is sender and Fileserviceis receiver.
So there should be
one Sender Ag
two RD
two ID
one RA.
Thanks
Farooq.

Error in AEX Itegrated Configuration Testing "No receiver agreement found."

Hi,
          I am working on PI 7.3, doing a File to Idoc by using the AEX(Advance Adapter Engine Extended). While doing the configuration testing i am getting the below error "
Problem occurred in receiver agreement for sender -BC_XXXXXXX to receiver -BS_XX5_100,urn:XXXX.com:POC:MasterData:Article:ECC:Sender.SI_OA_POC: No receiver agreement found for , BC_xxxxx, , BS_xx5_100, urn:xxxx.com:POC:MasterData:Article:ECC:Sender, SI_OA_POC."
        I gone through the SDN but not got usefull links. I tryied to recreating whole scenario, Cache refresh, but no luck. Can you pls let me know where is the problem. Do i need to do any additional configuration other than creating RFC in Java stack for AEX?
Thanks & Regards,
Dev

Hi RK,
        Thanks for your reply.
              Yes i have created the Idoc_AAE channel and assigned this channel in my Outbound Processing tab.
What do you mean by java channel in Inbound Processing? My sender is File so i created File channel and assigned in the Inbound processing tab.
@ Raghu,
            I have created the Receiver channel. I no need to create Receiver agreement because i am using the ICO so if i give the Receiver and Inbound interface details that is enough. And one more thing i am doing testing in ID Test confiuration.
Thanks ,
Dev

SAP PI Party setup IDoc - HTTP: no receiver agreement found

Hi,
We have setup SAP IDoc -> SAP PI --> HTTP with 2 parties, as described in the the 'HOW..TO Sample IDoc - XI scenario's' case 7:
For the clarity of the example, the sender at our side is 'AAA', and the receiver side is 'BBB'.
1. Sender Party
Agency -
Scheme -
Name
http://sap/com/xi/XI -
XIParty -
PA_AAA
BS_BBB    -
ALE#LI -
0000100581
2. Receiver Party
Agency -
Scheme -
Name
http://sap/com/xi/XI -
XIParty -
PA_BBB
AD2_200 (SAP system) -
ALE#KU -
DE217560
The other components in XI are as follows:
3. Business component: PA_BBB | BS_BBB (party and Business System)
4. Receiver determination: sender AD2_200, receiver party: PA_BBB, receiver component: BS_BBB
5. Receiver agreement: sender AD2_200, receiver party: PA_BBB, receiver component: BS_BBB
    Header mapping: sender comm party: PA_AAA, receiver comm party: PA_BBB
6. Communication channel (HTTP): CC_HTTP_RCV_BBB
    Identifiers: sender agency: BS_BBB ALE#LI, receiver agency: BS_BBB ALE#KU
When we send an IDoc with SNDPRN=AD2_200, RCVPRN=DE217560, RCVPRT=KU, SAPXI doesn't seem to find receiver determination, iinterface determination and receiver agreement
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start with given receiver PA_BBB -</Trace>
<Trace level="2" type="T">Using Receiver Determination 00000000000000000000000000000000</Trace>
<Trace level="1" type="T">No Relation found - accept given Receivers.</Trace>
<SAP:AdditionalText>No receiver agreement found for , AD2_200, PA_BBB, , urn:sap- com:document:sap:idoc:messages,
Can someone explain why these parties have to be indicated in all these different places (the party descriptions, the receiver agreement, the communication channel), and why the receive determination with receiver party PA_BBB is not found, although it is created and refreshed in the cache ?
Regards,
Jan Macken

I am also facing same issue when using 2 parties. Could you please let me know if you got solution for this?

No receiver agreement found Error in SXMB_MONI

Hello all,
I am working sample file to file scenario. after compliteion of my scenario i tested through component monitoring. i got following error in sxmb_moni, No receiver agreement found for sender, But i defined receiver agreement and communication channel, can any body suggest me how can i resolve this problem,
Thanks&Regards,
VenkatK

Dear Venkat,
Once check whether you have defined the correct reciver aggrement. If it is fine, Then delete the receiver aggrement and configure new one and activate it. And test the sceanrio once. I think this may solve ur problem. If the problem exists again, then follow the below steps.
In SAP system, Goto SICF tcode.
1.There you just click execute button or F8.
2.Then expand "Default Host" .(This will be in below the Virtuelle hosts/services)
3.Then expand SAP.
4.Then expand XI.In that just activate all the service elements.Just right click and select activate service.
After this, execute your sceanrio. This will solve your problem.
If Helpful reward points.

Problem with BPM: no receive step found for message ....

Hello,
I have the follwing problem with a BPM ina PI 7.3 system.
I created a BPM for the following 'process':
We will receive an IDOC from SAP ECC, then call a synchronous webservice and finally send the result back to ECC.
I created my BPM.
Now when I send the IDOC, the interface is triggered but it gets stuck in the queue with message 'No receive step found for message ...'. I get this message when I go to Tx SMQ2 and try to simulate the message
I have already refreshed the CPA cache without result however.
in SXI_CACHE I can find my IP* and the status = '0' ( So i guess this is OK )
I do not use correlations in my BPM.
In my configuration I can find my sender agreement and interface determination towards the service (abstract) which is defined in the receive step of the BPM.
Does anybody have any ideas what can be wrong ?
Thanks,
Erwin
Edited by: Erwin Van Lysebetten on Oct 27, 2011 10:37 AM

Hi Erwin, delete Integration Process in the Directory Integration and import it again.

No standard agreement found for receiver

HI,
I am doing File to Multiple files (3 )bases on Identifer
Each and Every File of receiver has Different Communication component.
I am doing Multimapping to split based on the condition.
1) Created 1 Sender Agreement
2) Created 1 Receiver Determination Given all the receiver component (3) in configured receivers
3) Created 1 Interface Determination , called the Operation mapping which contains all the 3 Service interfaces including Multimapping.
4) Created 3 Receiver communication channels.
But I am getting Following error
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_ERROR</SAP:Code>
<SAP:P1>-TR</SAP:P1>
<SAP:P2>-XXX_60,http://TEST</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>No standard agreement found for , TR, , XXX_60, http://test,
Thanks in advance

Hi Sap pixi ,
Try to create the scenario like this ,
1) Create 1 Sender Agreement
2) Create 1 Receiver Determinationwith all the receiver components (3) in configured receivers along with the conditions.
3) Create 3 Interface Determination .
4)3 mappings ,3 Operation mapping , 3 Service interfaces .
4) Create 3 Receiver communication channels.
Try the above scenario as the multi-mapping is not working for you,I tried the same for two different communication components, with no conditions in receiver determination and its working fine .
Regards,
Lavanya.B

ERROR in PI : No sender agreement found for , , , , ,

Hello everybody,
i'm working with SAP PI 7.1
it's a new installation.
I created the first easy interface JDBC-Pi-File.
when i activate the CC i don't see any message in SXMB_MONI but in RWM i see the messages in Waiting status and when i look inside i see the follow error:
SOAPFAULT received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BS_CSIS_DEV, http://xxxx.com/test, SI_DB2SP_DOCUMENTS_AA_02; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BS_CSIS_DEV, interface namespace http://xxx.com/test interface SI_DB2SP_DOCUMENTS_AA_02 No sender agreement found for , , , , ,
1-Configuration is ok. I create all steps and sender Agreement exist
2-end point http://yyyyy:50100/sap/xi/engine?type=entry is correct and the same in SLD and sxmb_adm -> Integration Engine Configuration
3-i suppose 50100 port is correct because when i try to use 8010 port i have a different error.
4- i alreadi used CPA cache refresh and SXI_CACHE.
Any suggestion?
thanks

after 20 minuts i retry.
Now the error message is changed:
Transmitting the message to endpoint http://yyyyyy:8010/sap/xi/engine?type=entry using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection refused.
Edited by: apederiva on Aug 25, 2010 11:35 AM

No standard agreement found for BS_A ,, BS_B

Hi Experts,
We are getting a very common error " No standard agreement found for BS_A ,, BS_B https://abc.com,SIOA_forcast,,,
There interface was succsfully executing few days back.
Here are some information abount the interafce.
1) JMS to IDOC
2) IDoc control record mapping
When i checked the pipe line steps in MONI , starngely it is showing
SAME SENDER interface name SIOA_forcast in sender and receiver interface . And thus it got failed in reciver agreent. I could not see the Idoc and IDoc namespace
I have searched in SDN but, did not get any clear picture
I have done the following
1) checked SXI_CAHCE and cahche instance if every object.
All objects are up -to-date
2) Deleted and recreated ID objects
3) Check the interfaces in message mapping , operation mapping , interface determination etc..., all are looking fine.
DId anyone faced this issue before.
I have asked basis for a full refresh , but i am not confident wheather that will solve the issue or not.
Please provide your valuable input and let me understand the issue.

Hi Sam
Was anything changed during last few days?
PI is not able to determine receiver interface and keeps sender inteface details. For this reason it can't find receiver agreement.
Check that your interface determination object is correct and perform a full cache refresh.
Also copy your message payload from SXMB_MONI and use the test tool (Tools -> Test configuration) in ID.
Regards,
Giuseppe

No Standard Receiver Agreement found

Hi all,
I have configured a scenario between a Business System and Business Service .
As we tried to test the Configuration scenario using Test Configuration Tool, it gives the following error in the Receiver agreement.
Sender Business System : M1S_001 (WS Adapter )
Receiver Business Service : BC_MAIL_RECEIVER (Mail Adapter)
"A problem arose to BC_MAIL_RECEIVER, http://sap.com/xi/AP/FO/Activity/Global.ActivityManagementEmailNotificationOut
during the receiver agreement for the transmitter - M1S_001 to the receiver -:
NO standard agreement found for, M1S_001, BC_MAIL_RECEIVER,
http://sap.com/xi/AP/FO/Activity/Global, ActivityManagementEmailNotificationOut
We have checked in the SXI_CACHE ,Receiver agreement is there but still we are getting the same error.
Please help if anyone faced the same problem and has a solution for it .
Thanks
Ashwin Kumar
Message was edited by:
Ashwin Kumar Dhakne

Hi ,
Everything is fine with the Sender / Receiver agreement .Activated all the ID and IR objects , but it seems a different issue .
if you have any clue please reply as soon as possible.
Thanks

No receiver agreement found.

Hi Experts,
I am doing one scenario i.e idoc to file .
I am getting an error that is "no receiver agreement found" in sxmb_moni, but i did the test configuration in ID which is working fine.
can any one help on this.

Hi,
Check the following.
1. Any cache problems in the ABAP stack and java stack.
2. Check your receiver whether it is case sensistive.
3. Check the receiver determination pipeline step in soap header whether the sap receiver anything filled in or blank. If blank, definitely there is an error in your config.
Since you have tested it in ID, I would assume it would be cache problem.
Regards
Krish

Error: No standard agreement found for....

Hello,
I've been fighting during hours with this error. I'm using PI 7.1 ehp 1 in a SOAP to RFC scenario and I can't find why this is happening.
In the scenario everything it's ok. If I go to the receiver determination I can see the interface determination, receiver agreement and receiver communication channel but when I test the scenario PI isn't capable to determine the receiver interface (the system determines that the receiver interface is the sender interface)... It doesn't matter if I use a SOAP client or I use the RWB tool to test it directly to the IE.
I've refreshed all the caches, and I created allt the scenario again but the problem is still there...
Can it be a problem with this last PI version?

Thank you Rajesh,
I've tested the configuration in ID and it's much more clear there. The problem is that the system didn't found any interface determination... and then it uses the sender interface as receiver interface... But it has no sense because if I go to the receiver determination object I can see how PI detects the interface determination for that receiver...
<Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="1" type="T">...There is no Interface Determination configured for receiver party and receiver service "RECEIVER" </Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) "RECEIVER" "OUT INTERFACE" </Trace>
<Trace level="2" type="T">...valid InbIf without Condition: "IN INTERFACE" </Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1 </Trace>
<Trace level="1" type="E">CL_ID_PLSRV-ENTER_PLSRV</Trace>

"No receiver agreement found" for BPM ???

Similar Messages

Maybe you are looking for