No_Receiver_Case_BE - Error

Hi Friends,
I have received the No_Receiver_Case_BE error in my interface. I could see the receiver determination which has been already set up between the sender and receiver systems. Also there is no problem with the cache, but still not sure which is causing this problem. Can anyone help?
- Jack

Hi Jack,
Can you do the following:-
1. Perform CPA Cache refresh / complete cache refresh.
2. If not fixed by step 1, try re-starting the PI system.
This problem occurs because of cache not being refreshed properly.
Let us know if this is helpful.
Regards,
Neetesh

Similar Messages

"NO_RECEIVER_CASE_BE" error with SOAP Sender assigned to a Business Service

Hi all,
we have a strange error with XI3.0
We created a configuration scenario where the initial step is done by a Business System, that uses a SOAP Sender communication channel to send its request. And this works great when testing it with XMLSpy.
But we then needed to shift from a Business System to a Business Service, as the machine sending the SOAP request changed and was not anymore part of the landscape, but elsewhere.
Hence we recreated a SOAP sender which we assigned to this new business service, doing absolutely the same configuration work as for the other soap sender of the former business system.
Yet when testing it through XMLSpy, we everytime get a NO_RECEIVER_CASE_BE error back, stating that "No receiver could be determined". Yet when checking in sxi_cache, receiver determination is clearly there. All the blogs I went into are only refering to Business System for a SOAP sender, so I was wondering if any of you already managed to assign a SOAP sender to a business Service.
Regards,
Cedric

hi,
so you sue SOAP to make a query ? (sync)
or to send the data to XI ? (async)?
if async then make sure
you use Quality of Service other then BE
in your soap adapter channel
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

NO_RECEIVER_CASE_BE error in a SOAP - XI - RFC scenario

Hi gurus:
I'm configuring a SOAP -> XI -> RFC scenario and I'm getting a "NO_RECEIVER_CASE_BE" error when I send a test message using the SOAP adapter.
I have another interfaces using the SOAP adapter of the same XI server and no problems with it. So I think my problem is not into the SOAP adapter.
Thanks to all in advance,
Alejandro Gomez.
Edited by: Alejandro Gómez on May 27, 2008 10:24 AM

Hi:
The entire XML result from MONI is next:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30"><SOAP:Header><SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7"><SAP:MessageClass>ApplicationMessage</SAP:MessageClass><SAP:ProcessingMode>synchronous</SAP:ProcessingMode><SAP:MessageId>BD9B57A1-2BCC-11DD-C738-001B7899027A</SAP:MessageId><SAP:TimeSent>2008-05-27T09:10:24Z</SAP:TimeSent><SAP:Sender><SAP:Service>Openlab_Desarrollo</SAP:Service><SAP:Interface namespace="http://www.huc.es/xmlns/openlab">ServicioObtencionDatosPaciente</SAP:Interface></SAP:Sender><SAP:Interface namespace="http://www.huc.es/xmlns/openlab">ServicioObtencionDatosPaciente</SAP:Interface></SAP:Main><SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:QualityOfService>BestEffort</SAP:QualityOfService></SAP:ReliableMessaging><SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Hop timeStamp="2008-05-27T09:10:24Z" wasRead="false"><SAP:Engine type="AE">af.xi2.xidserver</SAP:Engine><SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter><SAP:MessageId>BD9B57A1-2BCC-11DD-C738-001B7899027A</SAP:MessageId><SAP:Info/></SAP:Hop><SAP:Hop timeStamp="2008-05-27T09:10:24Z" wasRead="false"><SAP:Engine type="IS">is.00.xidserver</SAP:Engine><SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter><SAP:MessageId>BD9B57A1-2BCC-11DD-C738-001B7899027A</SAP:MessageId><SAP:Info>3.0</SAP:Info></SAP:Hop></SAP:HopList><SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><SAP:Date>20080527</SAP:Date><SAP:Time>101024</SAP:Time><SAP:Host>xidserver</SAP:Host><SAP:SystemId>XI2</SAP:SystemId><SAP:SystemNr>00</SAP:SystemNr><SAP:OS>Windows NT</SAP:OS><SAP:DB>ORACLE</SAP:DB><SAP:Language/><SAP:ProcStatus>023</SAP:ProcStatus><SAP:AdapterStatus>000</SAP:AdapterStatus><SAP:User>XIAFUSER</SAP:User><SAP:TraceLevel>3</SAP:TraceLevel><SAP:Logging>1</SAP:Logging><SAP:LogSeqNbr>001</SAP:LogSeqNbr><SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr><SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal><SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal><SAP:PipelineElementId>5BC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId><SAP:PipelineService>PLSRV_RECEIVER_DETERMINATION</SAP:PipelineService><SAP:QIdInternal/><SAP:CommitActor>X</SAP:CommitActor><SAP:SplitNumber>0</SAP:SplitNumber><SAP:NumberOfRetries>0</SAP:NumberOfRetries><SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries><SAP:TypeOfEngine client="100">CENTRAL</SAP:TypeOfEngine><SAP:PlsrvExceptionCode/><SAP:EOReferenceRuntime type="TID"/><SAP:EOReferenceInbound type="TID"/><SAP:EOReferenceOutbound type="TID"/><SAP:MessageSizePayload>508</SAP:MessageSizePayload><SAP:MessageSizeTotal>2985</SAP:MessageSizeTotal><SAP:PayloadSizeRequest>508</SAP:PayloadSizeRequest><SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap><SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse><SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap><SAP:Reorganization>INI</SAP:Reorganization><SAP:AdapterInbound>AENGINE</SAP:AdapterInbound><SAP:InterfaceAction>INIT</SAP:InterfaceAction><SAP:RandomNumber>00</SAP:RandomNumber><SAP:AckStatus>000</SAP:AckStatus><SAP:SkipReceiverDetermination/></SAP:RunTime><SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30"><SAP:RunTimeItem><SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name><SAP:Timestamp type="begin" host="xidserver">20080527091024.6</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name><SAP:Timestamp type="end" host="xidserver">20080527091024.6</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name><SAP:Timestamp type="begin" host="xidserver">20080527091024.6</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name><SAP:Timestamp type="end" host="xidserver">20080527091024.6</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name><SAP:Timestamp type="begin" host="xidserver">20080527091024.616</SAP:Timestamp></SAP:RunTimeItem></SAP:PerformanceHeader><SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:TraceLevel>Fatal</SAP:TraceLevel><SAP:Logging>Off</SAP:Logging></SAP:Diagnostic><SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30"><Trace level="1" type="T">Party normalization: sender </Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external = </Trace>
<Trace level="1" type="T">Sender party normalized = </Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST"></Trace>
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.1</Trace>
<Trace level="2" type="T">Host = xidserver:8000</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.1</Trace>
<Trace level="2" type="T">Remote address = 10.137.73.104</Trace>
<Trace level="1" type="T">COMMIT is done by XMB ! </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE"></Trace>
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB... </Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE">
</Trace>
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found </Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK. </Trace>
</Trace>
<Trace level="1" type="T">**************************************************** </Trace>
<Trace level="1" type="T">* * </Trace>
<Trace level="1" type="T">* * </Trace>
<Trace level="1" type="T">XMB entry processing </Trace>
<Trace level="3" type="T">system-ID = XI2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = S</Trace>
<Trace level="3" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2008-05-27T09:10:24Z CET </Trace>
<Trace level="1" type="T">* * </Trace>
<Trace level="1" type="T">* * </Trace>
<Trace level="1" type="T">**************************************************** </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE"></Trace>
<Trace level="1" type="T">Message-GUID = BD9B57A12BCC11DDC738001B7899027A</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = BE</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC"></Trace>
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline attributes </Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline elements </Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">FL_DUMMY = </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="2" type="T">Persisting original message </Trace>
<Trace level="3" type="T">Message-Version = 000</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="Timestamp">2008-05-27T09:10:24Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION"></Trace>
<Trace level="1" type="Timestamp">2008-05-27T09:10:24Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification... </Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV) </Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE = </Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG = </Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T"> </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace>
<Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
<Trace level="2" type="T">Start without given receiver </Trace>
<Trace level="1" type="T">No Relation found - accept given Receivers. </Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules. </Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0 </Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace>
<Trace level="3" type="T">Persisting message Status = 023</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace></SOAP:Header><SOAP:Body><SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7"><SAP:Payload xlink:href="cid:payload-bd9b57a22bcc11dd95bc001b7899027a#sap.com"><SAP:Name>MainDocument</SAP:Name><SAP:Description>Main XML document</SAP:Description><SAP:Type>Application</SAP:Type></SAP:Payload></SAP:Manifest></SOAP:Body></SOAP:Envelope>
Thanks,
Alejandro Gomez.

Error in Mail Adapter Monitor......

Hi....
I have done the mail adapter and i got following error in Adapter Monitor(Mail Adapter)
error occured: [2006-05-31T05:53:34Z] 0 new messages found; no action takenexception caught during processing mail message; com.sap.aii.af.mp.module.ModuleException caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:
how to recover this....
I am using pop3 mail server
Thanks & regards
Ravi Shankar B

hi,
check if you don't have quality of service Best Effort - BE in your mail sender channel
if so change it to EO - Exactly Once
and activate and your channel once more
this setting will eliminate:
NO_RECEIVER_CASE_BE error
change this setting and let me know if it worked
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

WebService Call: RCVR_DETERMINATION: NO_RECEIVER_CASE_BE

Hello,
I want to call an external Web Service from my ABAP Code, but I get an error in transaction sxmb_moni:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no idea, where this error message comes from... Have you any solution proposals?
Thank you

Hi Yu
for the error RCVR_DETERMINATION.NO_RECEIVER_CASE_BE error
look at these thrad discussed the same
Consume a Web Service: No receiver could be determined
Error in my HTTP > XI > RFC (BAPI) senario
Http to IDOC Error
Regards
Abhishek

Call Inbound Proxy error

PI settings help
I am trying to transfer PR from ERP6.0 EHP4 to SRM7.0 using CPPR scenario.
I configured ERP/SRM and PI configuration in Integration directory.
But i get Reciever determination error in XML at ERP/SRM AND PI
RCVR_DETERMINATION">NO_RECEIVER_CASE_BE
Error Text: No receiver could be determined
In SRM, Inbound Message(reciever) is green but Call Inbound Proxy is giving below error.
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing! <Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
I tested configuration in Integration directory.
Sender aggreeemnt is green
Reciever determination is red and giving below error.
Internal Error : You do not have sufficient authorization for this operation.
I have done below setting in Integration directory.
Business system setting.
1.Selected Business System BC_MM_MXX_594
2.Create communication channel(Gen_Rec_xi) as Receiver
for above Business system BC_MM_MXX_594.
-Use adapter type XI, http://sap.com/xi/XI/System SAP Basis7.xx and RFC MXX_Integration,
1.Selected Business System BC_SRM_SXX_300
2.Create communication channel(Gen_Rec_xi) as Receiver
for above Business system BC_SRM_SXX_300.
-Use adapter type XI, http://sap.com/xi/XI/System SAP Basis7.xx and RFC SXX_Integration.
-->>one doubt here? Should i have to create Comm channel for sender type also from ERP and SRM? pls confirm.
I created object in Integration directory as follows.
Create Object by selecting Business System BC_MM_MXX_594.
1)Selected Internal communication
2)Reciever Determination : BC_MM_MXX_594 PurchaseRequestERPSourcingRequest_Out
3)Specified Interface determination : BC_MM_MXX_594 PurchaseRequestERPSourcingRequest_Out BC_SRM_SXX_300.
4)Specified Reciever agreement BC_MM_MXX_594 BC_SRM_SXX_300 PurchaseRequestERPSourcingRequest_in(communication channel selected is Gen_Rec_xi)
5)Generated Objects and saved as CPPR_scenario.
6)Activated all objects created in CPPR_Scenario.
Pls suggest something wrong with Reciever determination?
How to find where the problem is located? at ERP or PI or SRM?.
Also onething i noted is Integrated configuration is empty in Integration directory.
Any configuration should be done for IOC.? pls confirm.
Regards
Chandra

Also i noticed below
In ERP xml ->Inbound message(SENDER).
Does this error indicate problem while sending from ERP to SRM or SRM to ERP.
because i can see sender service and interface is empty and SAP reciever is having ERP service.
however reciever does not fetched the corresponding(purchaseRequestxxxxxxx) interface names.
- <SAP:Sender>
<SAP:Service />
<SAP:Interface namespace="" />
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>BC_MM_MXX_594</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/APPL">QueryCodeList</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/APPL">QueryCodeList</SAP:Interface>
SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Regards
Chandra

Error:RCVR_DETERMINATION" NO_RECEIVER_CASE_BE

hi all,
In my soap-xi-rfc scenario this is the error i am getting in MONI when using .wsdl file from EP
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
but when i am testing the same data from HTTP client it is working fine.
I have deleted the receiver determination and interface determination and created again,but the error continues.
Also in MONI in the message list i can see the sender interface but i am not able to see the receiver system and interface
Can anyone help me out with this??
thanks and regards,
Nisheeta

Hi,
Check the trace in SXMB_MONI, and refresh cache.
Check you configred the determinations correctly or not,
check the receiver interfaces also in IR.
Please compare the entries in IB directory (receiver determination) with entries in Monitoring (SXMB_MONI): Service, Interface, Namespace
also see the below links
RCVR_DETERMINATION">NO_RECEIVER_CASE_BE
Consume a Web Service: No receiver could be determined
Regards
Chilla
reward points if it is helpful..

SAP GRC ERROR - NO_RECEIVER_CASE_BE

Hi All, I'm try implemented GRC and get this error (SXMB_MONI):
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
My receiver determination with the following values:
Service - GRC_NFE_CORE_70 (name of my BSystem)
Interface - SRVSC_nfeStatusServicoNF_SYNC_OB
Namespace - http://sap.com/xi/NFE/005a
Configured receivers
Service - SEFAZ_GO_HOMOLOG (name of my BService created)
Condition - (/ p1: nfeStatusServicoNF/p1: CUF = GO)
This error changes when configured to remove the condition receivers, this condition: Condition = (/ p1: nfeStatusServicoNF/p1: CUF = GO)
New Error:
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: unable to create a socket</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
Anybody help-me??
Thanks.
HMattos.

Venkat,
I make cache refresh full using the user PIDIRUSER, see result bellow:
CPA cache refresh (mode=full) successfully executed in 7077 milliseconds.
But the error persist..
Other sugestion?
Regards,
HMattos.

NO_RECEIVER_CASE_BE - No receiver could be determined error

Hi Experts,
Scenario: SOAP to JDBC BPM Scenario
Error: When I tried to execute the scenario, I am getting the below error. The interface mentioned in Integration Directory and SXMB_MONI are different. Where to do the correction?
Note :Refreshed the cache in SXI_CACHE and Administrator screen. I couldn't see the Integration Process in SXI_CACHE
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Regards
Sara

What was the resolution?

Error in Directory Cache Update

Hi,
because we changed from two SLDs (PROD & DEV) to one (DEV) we did all changes like given in note 720717.
Everything seems to run fine except the Adapter Engine - ok parts of it.
When checking the Cache-Infos in Integration Directory we get following error in Integration Server (Central Adapter Engine). What do we need to do?!
br
com.sap.aii.ib.server.abapcache.CacheRefreshException: Unable to find an associated SLD element (source element: SAP_XIIntegrationDirectory, [CreationClassName, SAP_XIIntegrationDirectory, string, Name, directory.px1.sapru03, string], target element type: SAP_XIIntegrationServer)
 at com.sap.aii.ibdir.server.abapcache.content.CacheCPA.addContent(CacheCPA.java:483)
 at com.sap.aii.ibdir.server.abapcache.content.CacheCPA.addContent(CacheCPA.java:154)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:388)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:326)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.processHTTPRequest(CacheRefreshRequest.java:145)
 at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.handleHTTPRequest(CacheRefreshRequest.java:103)
 at com.sap.aii.ibdir.web.abapcache.HmiMethod_CacheRefresh.process(HmiMethod_CacheRefresh.java:67)
 at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
 at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
 at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
 at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl10.process(HmisLocalLocalObjectImpl10.java:259)
 at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
 at com.sap.aii.utilxi.hmis.web.workers.HmisExternalClient.doWork(HmisExternalClient.java:75)
 at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
 at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(AccessController.java:207)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

Hi,
Hereu2019s a list of common errors/problems in SAP XI and their possible resolutions. This Guide will help you troubleshoot your integration scenarios in SAP XI/PI. This is in no way an exhaustive list. You can add your points/ideas to this list. Please feel free to post your inputs using the comments form at the end of this article.
Cache Update Problems
Use transaction SXI_CACHE to update the Integration Directory cache. Alternatively, you can use the following URLs to update the CPA cache. Use XIDIRUSER to refresh the cache.
For complete cache refresh - http://<hostname>:<port>/CPACache/refresh?mode=full
For delta cache refresh - http://<hostname>:<port>/CPACache/refresh?mode=delta
If this does not solve the issue, check transaction SLDCHECK to ensure that connection to SLD is available. If the connection fails, check the configuration in the transaction SLDAPICUST. Make sure that the password maintained is correct and the maintained service user is not locked.
Now in the Integration Repository go to Environment u2192 Clear SLD Data Cache. Also go to Integration Directoy and clear the cache using menu Environment u2192 Clear SLD Data Cache.
Open the XI Start Page and click on Administration. On the Repository tab, choose Cache Overview. Refresh the cache using the buttons/icons on the right. Use XIDIRUSER to refresh the cache. Carry out cache refresh in the same way on the Directory and Runtime tabs.
If you are facing cache update problems in your BPM (say you have modified the BPM, but when executed old version of the BPM is picked up instead of the new one), run the transaction SWF_XI_CUSTOMIZING and press F9 carry out automatic BPM/Workflow Customizing.
Routing Errors
NO_RECEIVER_CASE_BE or NO_RECEIVER_CASE_ASYNC
This means no receiver could be found. Check your Receiver Determination. Activate and update cache. Asysnchronous messages can be manually restarted.
TOO_MANY_RECEIVERS_CASE_BE
More than one receiver found. Check your ID configuration to ensure that there is exactly one receiver for the synchronous message. Multiple receivers for synchronous interfaces are not permitted.
Mapping Errors
JCO_COMMUNICATION_FAILURE
Check whether RFC destination AI_RUNTIME_JCOSERVER is correctly configured
NO_MAPPINGPROGRAM_FOUND
Ensure that mapping program exists and is activated. If it exists then update the cache.
EXCEPTION_DURING_EXECUTE
This error occurs due to erroneous XML formatting. Check your mapping program and ensure that you supply valid input data.
Messages stuck in queues
Check the queues using transactions SMQ1 (outbound)/SMQ2 (inbound). Resolve the displayed errors. You can cancel the messages from SXMB_MONI. Execute LUW if necessary and avoid deleting entries manually.
Conversion Errors
Unable to convert the sender service XXXX to an ALE logical system
This error occurs in case of scenarios with IDoc adapters. Whenever you use business systems, make sure that the corresponding logical system name is maintained in the SLD.
Open your business system in the Integration Directory. Switch to Change mode. Access the menu path Service u2192 Adapter Specific Identifiers. Click the button that says u2018Compare with System Landscape Directoryu2019 and chose Apply. Save and activate your change list.
In case of business services, you can manually type a logical system name in the Adapter Specific Identifiers if required. This name should match the corresponding logical system name defined in the partner SAP systemu2019s partner profiles.
Errors on the outbound side
Sometimes the link between SAP XI and the target system (say ERP) goes down and messages fail on the outbound side. It may not be possible to restart them from using RWB or the transactions like SXI_MONITOR/SXMB_MONI. In such cases, you can follow the procedure outlined in the following article - Dealing with errors on the outbound side.
Refer this article:
http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/content.htm
Refer this portal
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/pointers%2bfor%2btroubleshooting%2bportal%2bruntime%2berrors
Regards,
Suryanarayana

Mail Adapter Error occured in Adapter Monitoring....

Hi
I have done the Mail>XI>File senario.... the xi server is sometimes its picking up the mails but some times its not picking... i have give trasport protocol as IMAP4 and url as pop://ipaddress.... I have created the asyncronus message types...n i have given the quality service as Exactly Once... when ever the server is picking file from mail inbox its sending file to the destination directory successfully but in destination side i am getting only the complex tags like the following
<?xml version="1.0" encoding="UTF-8"?>
<ns0:File_Message_Type xmlns:ns0="http://mailtofiledemo.com/ravi"></ns0:File_Message_Type>
i am not getting any nodes inside those tags.... In adapter monitoring i am getting the following error:
error occured: [2006-06-05T05:44:06Z] 0 new messages found; no action takenexception caught during processing mail message; com.sap.aii.af.mp.module.ModuleException caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:NO_RECEIVER_CASE_BE:
I am using SquirrelMail(webmail) server... so please help me...
I have tried with pop3 alos but its not working
Thanks & Regards
Ravi Shankar B
Message was edited by: RaviShankar B

Hi,
Try giving POP3.
and correct address.. pop3://etc... Remember to give the name of the folder from where the message have to be picked.
Regards
Suraj
Message was edited by: S.R.Suraj

Error in Ws to File Scenario

Hi,
The Below error is displayed when executiong the proxy.
<?xml version="1.0" encoding="utf-8" ?>
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<SYSTEMFAULT href="#o239" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_AI_SYSTEM_FAULT id="o239">
- <CX_ROOT>
<TEXTID>F63AFF63DBE4BB4786A7F52CC4167145</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>97</PROGID>
<CONTID>3413</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_STATIC_CHECK />
- <CX_AI_SYSTEM_FAULT>
<CODECONTEXT />
<CODE>RCVR_DETERMINATION.NO_RECEIVER_CASE_BE</CODE>
<ERRORTEXT>No receiver could be determined</ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
</asx:heap>
</asx:abap>
I am using the Webservice URL:http://www.webservicex.net/CurrencyConvertor.asmx?wsdl.
Senderinterfacename:CurrencyConvertorSoap_out
SenderinterfacenameSpace:http://www.webserviceX.NET/
I am calling the above url (CurrencyConvertorSoap->http://www.webserviceX.NET/) by creating Proxy.
Up on executing the same ,I am Getting the above error as pasted.
Pl look in to it and let me know the solution.
Thanks,
Srinivasa

Hi Srini,
 Can you explain detail?
 How you used ws to file with proxy..
 I thing your creating outbound proxy.In that your calling the URL and passed some value and get the
 response back. You passed that response to XI.If that may right then there is no need for sender
 communication chennal and Sender Agreement.Create a Receiver Determination with your Business
 system Select your message interface.
Regards,
Prakasu

XI 3.0 SP14 Synchronous SOAP- XI- ABAP Proxy - fails with "System Error"

Hi All,
The synchronous response message fails at the stage "Receiver Identification".
It seems that the synchronous response XML has no "sender" attribute, so obviously the receiver determination fails.
In the message monitor I can see the correct payload coming from the ABAP proxy, so that part looks OK.
I have the same scenario working perfectly on another system landscape, so there might be a configuration side to it.
Thanks is advance,
Ofer
Message was edited by: Ofer Even-Tsur

Hi,
for the error information SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
looks like xi is not able to find a reciever of best case. Open up the scenario in COnfiguration, open up the modify(add spaces) and activate reciever determination / reciever communication channel.
cheers,
naveen

Error in scenario for client Java Proxy

2006-04-28 15:30:49 Success Java proxy runtime (JPR) is transferring the request message to the messaging System
2006-04-28 15:30:49 Success Application attempting to send an XI message synchronously using connection JPR.
2006-04-28 15:30:49 Success Trying to put the message into the call queue.
2006-04-28 15:30:49 Success Message successfully put into the queue.
2006-04-28 15:30:49 Success The message was successfully retrieved from the call queue.
2006-04-28 15:30:49 Success The message status set to DLNG.
2006-04-28 15:30:50 Error Received XI System Error. ErrorCode: NO_RECEIVER_CASE_BE ErrorText: ErrorStack: No receiver could be determined
2006-04-28 15:30:50 Error Returning synchronous error notification to calling application: XIServer:NO_RECEIVER_CASE_BE:.
2006-04-28 15:30:50 Error Transmitting the message using connection http://<SERVER>:<PORT>/sap/xi/engine?type=entry failed, due to: XIServer:NO_RECEIVER_CASE_BE:.
2006-04-28 15:30:50 Error The message status set to FAIL.
2006-04-28 15:30:50 Error Returning to application. Exception: XIServer:NO_RECEIVER_CASE_BE:
2006-04-28 15:30:50 Error JPR failed to transfer the request message to the messaging system. Reason: XIServer:NO_RECEIVER_CASE_BE:
I am getting this in the audit log for a Java Proxy <> XI <> RFC scenario. What could be the problem?
the configuration in integration directory seems to be perfectly fine however the message flow fails giving this error NO_RECEIVER_CASE_BE
Regards,
Amol

HI Amol,
Did you check the Message type/Message Inetrface names in the Java Proxy ?
Also check for Receiever Determinations in the configuration.
I assume that , you have created the Communication Channel under the Business System created as Standalone Java System.. If not check this.
Go to SXI_CACHE and check for the Receiever Determination created in the Configuration...
Hope this helps,
regards,
Moorthy

RCVR_DETERMINATION.NO_RECEIVER_CASE_BE

Hi,
I am trying to consume a web service (which published by a third party, out side of my network) through PI 7.11 . I have created the external definition via the web service WSDL then defined the Service Interfaces, Message Mappings and Operation Mapping in IR. Later i configured the scenario in ID and tested in Test Configuration in ID. It found correct receivers with the payload.
I also generated ABAP Proxy in ECC system and run test in SPROXY. It gave me "RCVR_DETERMINATION.NO_RECEIVER_CASE_BE No receiver could be determined" error message. I have run "http://<saphost>:<port>/CPACache/refresh?mode=full" many times but didnt help. I copied below TRACE message from SXMB_MONI.
I also noticed that there are two lines per test. One is sender and one is receiver but both Interfaces are same and outbound one.
What could be the problem?
KR,
Altug

<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">CL_XMS_MAIN->DETERMINE_EXT_PID: CENTRAL</Trace>
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Determining the sender agreement</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />

<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">User = XXXXXX</Trace>
<Trace level="1" type="T">Message ID = 4C0A5693C69C010DE10080000AA6001A</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS">
<Trace level="1" type="T">CL_XMS_MAIN->DETERMINE_EXT_PID: CENTRAL</Trace>
<Trace level="1" type="T">CL_XMS_MAIN->DETERMINE_INT_PID: SAP_CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">system-ID = BPD</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XXXXXX</Trace>
<Trace level="1" type="Timestamp">2010-06-09T06:04:21Z CET</Trace>
<Trace level="1" type="T">ACL Check is performed</Trace>
<Trace level="1" type="T">XML validation is executed</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE">
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = BE</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />

<Trace level="1" type="T">>>>PID delete old pid determination coding</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_XML_VALIDATION_RQ_INB">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_VALIDATION-ENTER_PLSRV">
<Trace level="1" type="T">Reading sender agreement</Trace>
<Trace level="1" type="T">Message does not contain a sender agreement</Trace>
<Trace level="1" type="T">Inbound validation by Integration Engine does not take place</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION" />

<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />

<Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="1" type="T">No Relation found - accept given Receivers.</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
</Trace>
<Trace level="1" type="T">An Exception has occured</Trace>
<Trace level="1" type="T">Error Text: No receiver could be determined</Trace>
<Trace level="1" type="T">SystemError message generated. Guid: 4C0C7AEFF2EC0079E10080000AA60016</Trace>
<Trace level="1" type="T">Error during execution of message : 4C0A5693C69C010DE10080000AA6001A</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): 4C0A5693C69C010DE10080000AA6001A</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />

</SAP:Trace>

No_Receiver_Case_BE - Error

Similar Messages

Maybe you are looking for