No receivers found when trying to connect to directv?

No receivers found when trying to connect to directv

Are your receivers connected to the internet?
If so did you try the Settings area of the DirecTV to Validate the IP address of the receiver?

Similar Messages

When trying to connect airport express keep getting unexpected error please try again. IVE TRIED A HUNDRED TIMES AND HAVE FOUND SUPPORT PAGES UNHELPFUL

when trying to connect airport express keep getting unexpected error please try again. IVE TRIED A HUNDRED TIMES AND HAVE FOUND SUPPORT PAGES UNHELPFUL

Have you tried using a WEP password for your wireless network instead of a WPA one? That fixed it for me.

Error message when trying to connect Classic 120GB to iTunes An internal error occurred during: "FindSonarTrackJob". java.lang.NullPointerException

When trying to connect to iTunes I get this message
An internal error occurred during: "FindSonarTrackJob".
java.lang.NullPointerException

I too am having this problem and have had, for about a week now.
I've found that by logging off itunes (if I can), closing it down, and then restarting it, sometimes allows it to work for one transaction (say downloading an updated app). After that it's back to the same error.
Really annoying.

Oracle Fatal error when trying to connect through sqlplus

Hi,
I am getting the below error when trying to connect to instance through sqlplus
Database version is :10.2.0.3
Operating system= Solaris Operating System (SPARC 64-bit)
OS version=5.10
[lscbd07p2*BMC]-\ORACLE>sqlplus
SQL*Plus: Release 10.1.0.4.0 - Production on Fri Nov 9 07:48:24 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: /as sysdba
ld.so.1: oracle: fatal: relocation error: file /u01/app/oracle/product/db/10.1.0.4/lib/libjox10.so: symbol kststop_: referenced symbol not found
ERROR:
ORA-12547: TNS:lost contact
Enter user-name:
Could you all please give me suggestions in order to solve this problem.
Thanks
Mannu

Have you recently patched/upgraded? This sounds like there might have been a problem relinking the executables / libraries, and/or a permissions problem. For example you may be referencing a 32 bit library with your 64 bit client.
I believe I recently read a similar case - check Metalink for this symptom.
HTH
Regards Nigel

Unable to invoke CFC when trying to connect Adobe Download Assistant

I am running Mac OS X (10.10.2).
When Trying to connect Adobe Download Assistant with my regular Adobe-ID credentials I see following error message:
unable to invoke CFC - The method login was not found in component tdrc.tdrcfacade.
Is there a way to "repair" Download Assistant or to install the recent version?
Thanks in advance
Enrico

Hi Jeff,
that's the catch.
Uninstall and installing a product worked.
I am doing a test on Acrobat.
Thanks a lot.
Enrico

Finder crashes when trying to connect to network share

Hi!
I've just upgraded my Mid 2012 MacBook Pro to Mavericks, and found that Finder always crashes when trying to connect to my office network share via an IPSec VPN connection. It's a Synology DiskStation NAS, so i have the options to connect via AFP or SMB, however both result in the same, the crashing of finder. Even after i relaunch it, i can't open finder, and can't even shut down or restart my system (only by holding the power button for 5 secs...)
At first i thought it's the result of the latest Little Snitch version, but the problem remained after completely removing Little Snitch.
Unfortunalely i won't be able to try connecting to the NAS on the local network until monday, but i'd really appreciate if someone could point me to the direction of some solution as this way i can't do any of my work.

Just a quick heads up. I finally managed to resolve the issue. It seems that mavericks doesn't handle the MTU of the vpn connection correctly, so i ended up modifying the MTU on the VPN gateway.

Page/JNI: Exception when trying to connect in 1,page/ContentFetcher InterruptedIOExce

We have upgraded to fro m 3.0.8 portal 3.0.9.8.2 9iAS 1.0.2.2 on database 8.1.7
the system is very fast and run for sometime but after a while we see the following errors in Jserv.log file.
this error causes the whole system to hang and we have to restart apache/jserv.
Any light on this issue will be helpful and very much appreciated.
thanks,
Sunil Bontha
25/07/2001 14:07:51:388 CEST] Viewer/oracle.discoiv.Disco4iv: init
[25/07/2001 14:07:51:388 CEST] Viewer/oracle.discoiv.Disco4iv: Initializing Discoverer 4i Viewer (4.1.37.82)
[25/07/2001 14:09:15:219 CEST] page/oracle.webdb.page.ParallelServlet: init
[25/07/2001 14:09:15:249 CEST] page/JNI: Cache is enabled.
[25/07/2001 14:09:15:299 CEST] page/Starting a pool of 25 handlers.
[25/07/2001 14:09:43:820 CEST] page/JNI: Exception when trying to connect in 1.
[25/07/2001 14:09:43:830 CEST] page/Timeout occurred, label=145 url=http://www.myserver.com/pls/pmsportal30/!PMSPORTAL30.wwpro_app_provider.execute_portlet [25/07/2001 14:09:43:830 CEST] page/ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher23
[25/07/2001 14:09:43:840 CEST] page/JNI: Exception when trying to connect in 1.
[25/07/2001 14:09:43:840 CEST] page/Timeout occurred, label=293 url=http://www.myserver.com/pls/pmsportal30/!PMSPORTAL30.wwpro_app_provider.execute_portlet [25/07/2001 14:09:43:840 CEST] page/ContentFetcher InterruptedIOException Caught, Fetcher Timedout name=content-fetcher22
[25/07/2001 14:09:53:864 CEST] page/JNI: Exception when trying to connect in 1.

Hi Avi,
My application is a standalone application trying to access MBeans present in oc4j.
I tried
using the code
props.put(Context.INITIAL_CONTEXT_FACTORY ,"oracle.j2ee.rmi.RMIInitialContextFactory");
obj = (ManagementHome) ctx.lookup("ejb/mgmt/MEJB");
but i am getting the following error.
javax.naming.NameNotFoundException: ejb/mgmt/MEJB not found
at com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java
:45)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at TestMBean.doSomething(TestMBean.java:90)
at TestMBean.main(TestMBean.java:237)
java.lang.NullPointerException
at TestMBean.doSomething(TestMBean.java:107)
at TestMBean.main(TestMBean.java:237)
Regards
Siva

Can't connect to Yahoo! calendar.When trying to connect Mail, Contacts, Messages and Notes connect but Calendar and Reminders don't connect. I get error A secure connection couldn't be established.

Can't connect to Yahoo! calendar.
When trying to connect Mail, Contacts, Messages and Notes connect but Calendar and Reminders don't connect.
I get error A secure connection couldn’t be established.
I think a lot of people are getting this. Some solutions with Gmail but v little with Yahoo!
Any answers?
drlounger.
Yosemite
Retina macbook pro 2012

Dear Al
Thanks for your reply.
I have just found out what's wrong. I went to the 'more info' section of my Chitchat application and it took me to a link where it explained that Yahoo Chat has ditched chatting with the Java protocol and chatters can now only chat via the Yahoo Messenger protocol, which is Yahoo Instant Messenger with Voice. Unfortunately Yahoo doesn't provide a platform for Yahoo Voice for Macintosh computers. Though the original link I went to provides another link to a thing called 'Adium' from which a Mac can access Yahoo Chat's new protocol, although it's not fully developed yet.
Oh...and thanks so much for letting me know about the Java update release. I did not know that I have to upgrade my system first to recieve the latest update information.
Regards
Tina

I keep getting result code -43 not found when trying to load certain instruments. Any idea why

I keep getting error code -43 not found when trying to load certain instruments. Any ideas?

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

WRT54G ver 6, MTU test fails when trying to connect to Xbox360 live

MTU test fails when trying to connect wirelessly to Xbox360 live. Firmware is current. I have a WRT54G version #6, Motorola Surfboard SB5101 Cable Modem, running AOL HighSpeed Broadband through Time Warner Cable. Changing the MTU setting does not work. I have tried several other suggestions found on these boards but nothing seems to work. Any help would be greatly appreciated!

hi twhale.... If you had already tried the settings i posted ... in such case you can do one thing .... access router setup page ... under Security ... uncheck block wan request ... click save settings .... Under Applications & Gaming tab ... click port range forwarding .... forward ports 88 & 3074 for the static Ip of the X-BOX ... click save settings . Click save settings ... check X-BOX live test ... if still shows the same error ... upgrade/reflash the firmware ...

Null connection when trying to connect to SQL Server 2000 in Tomcat4.1.29

Hi All,
I am still struggling with null connection when trying to connect to sql server 2000 with tomcat using sun.jdbc.odbc.JdbcOdbcDriver
Here is my server.xml
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>
<GlobalNamingResources>
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<Resource auth="Container" description="Users and Groups
Database" name="UserDatabase"
scope="Shareable"
type="org.apache.catalina.UserDatabase"/>
<Resource name="jdbc/DefaultDS" scope="Shareable"
type="javax.sql.DataSource"/>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.
MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
<ResourceParams name="jdbc/DefaultDS">
<parameter>
<name>validationQuery</name>
<value></value>
</parameter>
<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>
<parameter>
<name>maxActive</name>
<value>4</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>
<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>
<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
<parameter>
<name>maxIdle</name>
<value>2</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>

<Service name="Tomcat-Standalone">
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>

<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/DefaultDS" auth="container" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/DefaultDS">

<parameter>
<name>maxActive</name>
<value>8</value>
</parameter>

<parameter>
<name>maxIdle</name>
<value>4</value>
</parameter>

<parameter>
<name>maxWait</name>
<value>5000</value>
</parameter>

<parameter>
<name>user</name>
<value>sa</value>
</parameter>
<parameter>
<name>password</name>
<value>sa</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>

<parameter>
<name>url</name>
<value>jdbc:odbc:JBoss-SQL://localhost:1433;databaseName=Development;selectMethod=cursor;</value>
</parameter>

<parameter>
<name>description</name>
<value>JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver</value>
</parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Host>
</Engine>
</Service>
</Server>
and my web.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">

<web-app>
<resource-ref>
<res-ref-name>jdbc/DefaultDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
and JBoss-SQL is data source I created from control panel settings and here is way I am retrieving connetion
InitialContext initCtx = new InitialContext();
DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/DefaultDS");
Connection con = ds.getConnection();
return con;
I tried connecting as mentioned in this website
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html#Common%20Problems.But didn't help
Please help urgent
Sorry for long file. Can any one please help me in solving this problem.
Thanks in advnace
Kurakula

I'd recommend that you not use the JDBC-ODBC bridge driver to connect to SQL Server. M$ and jTDS are two free type IV JDBC drivers that you should use instead. Put those JARs in the WEB-INF/lib directory.
The database URL you're using is not correct if you change drivers. Consult the docs to find out what the proper syntax is.
MOD

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

I get error message 42032 when trying to connect an iPhone to iTunes. Any ideas how to fix it?

Did you already try these suggestions?
Check USB connections
Related errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
copied from Resolve specific iTunes update and restore errors

Keep getting Disc Burner or software not found when trying to burn a CD

I am not able to burn a playlist to a CD and get an error at the top of Itunes window "Disc Burner or Software Not Found". I have been able to burn CDs in the past with this same computer but had some issues with songs in itunes. Support had me uninstall Itunes and reinstall. I have also uninstalled the device in the device manager and re-installed it. I really don't know what to try except to ask for help here. I would appreciate any direction I can get. I have a Dell desktop XPS running on Windows 8.

Hi daurel,
Thanks for participating in the Apple Support Communities.
It sounds like you receive the error "Disc Burner or Software Not Found" when trying to burn CDs. You mention that you've already tried removing and reinstalling iTunes, and other drivers, and these are good steps.
If the situation continues, be sure to try the tips in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install - Apple Support
Sincerely,
Jeremy

My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute

Error message WMC604 in VZAM when trying to connect to 4G using Novatel USB551L.

VZAM recognizes the modem, and attempts to connect to 4G. After about 10 seconds, a message appears,"Error WMC604, Device could not establish a connection". (I have no problem connecting to 3G, just 4G)
One clue: If I have "Control Panel>Network Connections>Novotel 551L open when I try to connect, I can watch (if I am connecting to 3G) the modem aquire an IP address and connect. If I am connecting to 4G, there is no such activity shown on Control Panel>Network Connections>Novatel 551L modem. It just does nothing until the error message appears in VZAM. It's as if VZAM is not communicating with the modem although during this time VZAM displays a message "connecting".
I have created a dial-up connection in Windows 7 according to the Verizon knowledge base article ID=29355 just so I could use 4G, and the modem connects and works just fine. I just wish I get it to connect to 4G using VZAM.
I am using VZAM version v7.6.3.1(2642f) and one of the things that VZ tech support suggested was replace the SIM card, but that didn't make any difference. I am using Dell XPS 8300 desktop running Win 7 Home Premium,SP1 currently, although problem is the same on my Dell 5160 laptop running Win XP, SP3.
Hoping someone here on this board can help. I have spent hours on the phone with Verizon tech support and they say they have never heard of this error, and have no clue how to make it go away. In checking Google, I see that it is in fact a fairly common error in VZAM, but no one seems to know how to fix it......Verizon reps on the board feel free to come to my rescue?
HELP!!!!

AdamE_VZW
Thank you for your reply. I checked Device Manager for conflicts and see none. I opened VZAM and Device Manager>Novatel Modem side-by-side on the screen and attemped to connect to 4G using VZAM while watching Device Manager for conflicts. There were none indicated when the WMC604 error appeared in VZAM. According to Device Manager, my Novatel modem driver is version 1.1.12.0 ; dated 12/8/10. The "update driver" button is grayed out so I don't know how to check for a newer version. This version is the one that came on the VZAM install CD I belive.
Some background about this problem: When I first got this modem and installed the software, it worked as it should. It came up in Global mode and connected to a weak 4G signal that was comming from the Portland OR airport. Because the signal was weak and un-reliable, the modem would constantly shift back to 3G, and then every few minutes back to 4G, over and over. I got tired of putting up with the constant hunting, and, using the diagnostic screen, locked it into EVDO mode until 4G went live in Portland OR in the middle of June. During the time it was in EVDO (3G) mode, I had no problem connecting to 3G using VZAM. When Portland went live, I locked it back to LTE mode, and that was when I discovered the error WMC604 message. This was using my previous computer, a Dell Dimension 4500 desktop, Win XP,SP3, and an external Wilson log-periodic tri-band antenna. Since Portland went live, my current RSSI for 4G runs around -68db, and SINR varies between -9 to -12 db.
I recently got my present computer, a Dell XPS-8300 desktop, Core i7, Win 7 Home Premium, SP1. I did a fresh install of VZAM on this new computer using the CD that came with the USB551L modem and then checked online (using 3G) for VZAM updates. It says I have the latest version. The problem is exactly the same on the new computer as it was on my other 2 computers. That tells me that the problem must lie with the modem firmware or hardware, because the problem follows the modem, no matter what computer it is hooked up to. I even took it back to the Verizon store where I got it and they hooked it up to one of their computers and got the same error message when trying to connect to 4G. 3G worked properly
As I mentioned before, the modem instantly connects to 4G using the Win 7 dial-up connection I created and gives pretty good speeds, about 10MB down and 4-5MB up, according to SpeedCheck.com.
I can use it the way it is, it is just frustrating that it won't work using VZAM.
Thank you for your attention and help,
Inst_Tech

No receivers found when trying to connect to directv?

Similar Messages

Maybe you are looking for