No Reciever Could not be determined

Hi  Friends,
I m Doing XML To Idoc Scenario.............
i put one xml file in specified directory...........
XI getting that XML file..............
But in SXMB_MONI...................getting message
no Receiver could not be determined.........
Pls do some help

Dont test your interface without cheking testing the configuration details in ID.
How can I test my configuration in ID? Below is the answer.
/people/paul.medaille/blog/2005/06/24/test-your-xi-configuration-with-the-new-test-tool
Note: Do provide the valid Payload in the Payload Text Ares..otherwise Interface Determination/Mapping step will fails in the Test tool
This is only possible from XI3.0 SP-12 and above
Regards,
Farooq.
Edited by: FarooqFarooqui on Dec 17, 2007 5:13 PM

Similar Messages

  • Error: FES025.  Codepage could not be determined

    Hi,
    I have a number of programs that run using an include containing the function GUI_DOWNLOAD to create files lacally or on the server.  The programs work perfectly in foreground but their purpose is to run as jobs every night and create the files on the server, which returns the job as CANCELLED and the log reads;
    11.12.2008 09:00:17 No se ha podido determinar code page (Codepage could not be determined)
    11.12.2008 09:00:17 El job ha sido cancelado tras excepción de sistema ERROR_MESSAGE.
    When I execute the program in foreground using a message log I recieve a message on the status bar indicating;
    Transfered 913 bytes, code page 1160.
    I'm not quite sure what the code page does.  I read another forum which explained that it has something to do with the character set.
    Is there any way can assign the code page myself in the program?
    Regards,
    Simon

    OPEN DATASET gv_file FOR INPUT IN TEXT MODE ENCODING DEFAULT
                                WITH SMART LINEFEED.
      ENDIF.
    *If the Presentation Server is selected on the selection screen
      IF p_local EQ gc_x.
        LOOP AT gt_text_file INTO wa_text_file.
          CLEAR wa_text_table.
          SPLIT wa_text_file-line AT gc_comma  INTO   wa_text_table-objectid
                                                      wa_text_table-lifnr
                                                      wa_text_table-matnr
                                                      wa_text_table-ebelp
                                                      wa_text_table-tdname
                                                      wa_text_table-spras
                                                      wa_text_table-textid
                                                      wa_text_table-object
                                                      wa_text_table-line.
          APPEND wa_text_table TO gt_text_table.
        CLOSE DATASET gv_file.

  • Getting an error "Customer could not be determined" for IDOCs in SCM 7.0

    Hi Friends,
        I am executing the report RSMIPROACT in ECC 6.0 system to publish Demand and Stocks into the SCM 7.0 system.
    The IDOC is processed without any errors in ECC 6.0 . However, in the SCM 7.0 system , the IDOC fails with the error.
    I have noticed that 2 things .
    1.  E1ADRE1 field is NOT being sent by the ECC system .
    2. I get the same error even if I manually add this field and add value 300 or 301 for the qualifier field.
    Has anybody faced this problem before ?
    I look forward to replies.
    Detailed error is given below.
    Regards,
    Ranjini.
    Customer could not be determined
    Message no. /SAPAPO/EDI010
    Diagnosis
    The system must determine the customer number from the IDoc data in order to update stock and sales figures for customers. It uses the additional section E1ADRE1 with the qualifier '300' or '301' in the vendor address section to do this. The customer number stored here should have a valid customer number in the APO System.
    The section was not available in the processed IDoc.
    System Response
    The system cancels processing.
    Procedure
    Configure the EDI convertor in such a way that the corresponding section has a value.

    Hi Ranjini,
    Please look into the following
    1) Customer master data is fully maintained
    2) Customer number ranges are fully defined in customisation
    3) Customer address details are maintained
    4) Is there any special characters used while defining customer data or customer
    number like $, #,[ etc.,?
    5) Customer int models are active in SCM side prior to IDOC processing (including
    customer, demand, stocks etc)
    Please confirm your findings
    Regards
    R. Senthil Mareeswaran.

  • Error "codepage could not be determined for the receiver-system"

    Hi,
    we use the idoc-adapter to send message from mySAP ERP to PI.
    All worked fine.
    So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
    When I start transction "we05" in mySAPERP" I get the following error:
    "codepage could not be determined for the receiver-system" status 02.
    I have changed the datatyp to "char" but the same probleme
    Can anybody help me please?
    Regards
    Stefan

    This error shouldn't occur unless there is some modification at the OS level codepages.
    Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
    Regards,
    Prateek

  • Error message while CREATING PO - PGrp could not be determined

    Hi all,,.
    We are on SRm 7. ECS.
    The issue we are facing is:
    WHen I click on CREATE PURCAHSE ORDER trasnaction,I get this message "Purcahsing group could not be determined;Inform system administrator".
    Edited by: nmsrm1234 on Nov 10, 2011 2:09 AM

    Hello,
    The error is coming because to create PO directly you have to be a Purchaser,you need to belong to a purchasing group in SRM.In PPOMA_BBP  Assign your user id below a purchasing group directly or right click the present position and go to 'Assignment-->Purchaser Assignment', select a purchasing group and save.
    Then Try creating now a purchaser order directly .
    Regards,
    Neelima

  • Report RSMIPROACT gives Customer could not be determined for IDOCs

    Hi Friends,
    I am executing the report RSMIPROACT in ECC 6.0 system to publish Demand and Stocks into the SCM 7.0 system.
    The IDOC is processed without any errors in ECC 6.0 . However, in the SCM 7.0 system , the IDOC fails with the error.
    I have noticed that 2 things .
    1. E1ADRE1 field is NOT being sent by the ECC system .
    2. I get the same error even if I manually add this field and add value 300 or 301 for the qualifier field.
    Has anybody faced this problem before ?
    I look forward to replies.
    Detailed error is given below.
    Regards,
    Ranjini.
    Customer could not be determined
    Message no. /SAPAPO/EDI010
    Diagnosis
    The system must determine the customer number from the IDoc data in order to update stock and sales figures for customers. It uses the additional section E1ADRE1 with the qualifier '300' or '301' in the vendor address section to do this. The customer number stored here should have a valid customer number in the APO System.
    The section was not available in the processed IDoc.
    System Response
    The system cancels processing.
    Procedure
    Configure the EDI convertor in such a way that the corresponding section has a value.

    Hi,
    i'm facing the same problem. Could you solve it?
    Regards

  • Withholding tax -number could not be determined for numbering group ID0017

    While positing the FB60 transaction with withholding tax for country Indonesia, the below error is coming:
    A number could not be determined for numbering group ID0017
    Message no. 7Q630
    "The system could not determine a certificate number for the numbering
    group.
    Withholding tax types exist that are relevant to numbering. The system
    cannot determine a certificate number because the Customizing settings
    are incomplete.
    Sysem Response
    Payment cannot be made.
    Procedure
    Check the number ranges in the numbering group."
    Already seen the wothholding tax number range and it is coorec. Please advise how to resolve.

    Dear,
    Please check whether you have assigned the number range to the number group in the below setting
    Spro
    Financial Account Global Setting> Withholding Tax>  Extended Withholding Tax> Posting> India> Remittance Challan>     Assign Number Range to Number Groups

  • Customer/vendor could not be determined for intermediate document

    does any one know how to solve this problem, i got this error for an inbound idoc 820 (remmitance advice).

    Hi rob,
    Message no. FD017
    This is the following message:
    Customer/vendor could not be determined for intermediate document 0000000000047039
    Message no. FD017
    Diagnosis
    Several procedures are defined for determining the partner (customer or vendor):
    1. The customer/vendor can send his/her account number (the account
       number in our system) in the address segment.
    2. The customer/vendor can send his/her account number (our number at
       the customer or vendor) in the address segment.
    3. Only the name in the address segment clearly identifies the
       customer/vendor. In this case you can create an allocation within
       intermediate document customizing (IDoc base -> Control -> Forward
       inbound).
    4. The customer/vendor is determined using his/her bank details (only
       for the "INVOIC01" intermediate document type).
    5. The customer/vendor is taken from the control record of the
       intermediate document.
    For 1.-3.: One of the address segments with the partner functions
               "II", "RS", "SU", 'SE' ("INV_ID01"), or "RS" or
               "LF" ("INVOIC01") is used for determining the
               customer/vendor.
    Procedure
    Create the customer or vendor within Financial Accounting or maintain his/her bank details.
    Create customer         - Proceed
    Customer bank details   - Proceed
    Create vendor           - Proceed
    Vendor bank details     - Proceed
    If the customer/vendor can only be determined using his/her name, create a record within intermediate document customizing with
    logical address = name, application = "FI" or "MM" and physical target in the SAP system = customer number/vendor number.
    Proceed

  • Customer/vendor could not be determined for IDOC

    Hi all,
    Am trying to post incoming payments through EDI ..
    IDOC Information
    IDOC type: PEXR2002
    Message type: REMADV
    Function Module: IDOC_INPUT_REMADV
    Process code: REMA
    Am getting these 2 errors :
    Customer/vendor could not be determined for intermediate document
    Company code could not be determined for intermediate document
    Has anyone encountered this problem, if yes can anyone suggest the solutions, any help regarding this is highly appreciated.
    Thanks.

    Hi,
    Currently I am facing with the same type error when trying to post incoming payments through EDI.
    IDOC Information
    IDOC type: PEXR2002
    Message type: REMADV
    Function Module: IDOC_INPUT_REMADV
    Process code: REMA
    I am getting the below error:
    1. Company code could not be determined for intermediate document
    I have maintained record records for partner type and partner number in OBCA.
    Please advice what are the other configuration changes do I need to maintain.
    Your assistance would be highly appreciated.
    Thanks.
    Edited by: Victor Collins on Feb 27, 2009 9:31 PM

  • Company code could not be determined for IDoc #.......

    I was trying to generate an IDoc manually by using the tcode WE19. I have manually keyed the data in to the respective segments for the basic type PEXR2002 and message type REMADV. After this while processing, the IDoc is getting generated, but not posted OK. I am getting the following two error messages 51 stating:
    'Company code could not be determined for the IDoc #....'
    'Customer/vendor could not be determined for the IDoc #.'
    Can any one give some inputs on this issue?
    Shaji
    Message was edited by: Shaji Thomas

    Hi Shaji,
    You may look at the OSS note 316811.
    Thanks
    Vinod

  • BGD Job : Codepage could not be determined

    Hi all,
        I run a report  (YMMI0038) in background and hitting the following error :
        Codepage could not be determined  FES 025 E
        Job cancelled after system  exception ERROR_MESSAGE 00 564 A
        This has no problem when running in foreground.
        Do you have any idea for this ?
    Best Regards,
    Ken

    Hello Ken,
    Please check -
    Note 765763 Setting the upload/download codepage for a SAPGUI connection
    Note 882961 File download: codepage conversion error FES024
    Thanks

  • PY error message - EE's salary group could not be determined for Plan Life

    We are running through Payroll errors when there is a Separation action being carried :
    u201DEmployeeu2019s salary group could not be determined for plan LIFEu201D.
    On IT0168 the costs  are u20180u2019
    This has to be resolved ASAP. Any inputs/ advise is greatly appreciated.

    During the "Separation" action, does the employee change WT on IT0008?
    If so, it could be that the Life Plan's Calculation Base does not include that WT (and check the IMG under Payroll > Benefits Integration > Define WageTypes for Benefit Plans)

  • Currency could not be determined for person ?

    Hi,
    I have created in PA30 the "compensation process" subtype " Spot bonus" for an employee , but then when i changed the status in ECM ( Enterprise compensation management) ( From In planning -> Approved ,( OK) , Approved to " Active" I got the following error"
    "Currency could not be determined for person Nguyen Ngoc Ngan between 30.10.2007 and 30.10.2007"
    Please help me out with this
    Thank you very much

    Great Suresh , You are excellent !
    I have added a new record in the table T500C for my local currency i have tested successfully .
    But i face a small problem with " Salary adjustment" when i created in compensation process infotype the salary adjustment ( In planning ) it is ok , but when i change the status from "Approved to active " I got the following err ;
    "Salary adjustment of Nguyen Ngoc Ngan on 31.10.2007 could not be activated "
    ( Bonus worked fine ).
    Thanks

  • Codepage could not be determined

    Hi all,
    I am facing a little strange problem in my system, When i run HR Program my background scheduled jobs are getting cancelled due to an error called "Codepage could not be determined".
    Can any one just tell me their experience if the have encountered similar problem in the past.
    It's little urgent as we have stuck with all our background schedules jobs.
    Thanks...

    Hi,
    Please use
    OPEN DATASET L_FILENAME FOR OUTPUT IGNORING CONVERSION ERRORS. " Ignoring conversion errors should be added
    Best regards,
    Prashant

  • "The Destination Directory Could Not Be Determined For Photo Delluxe 4.0"

    I Downloaded Adobes Photoshop from thier Site.
    When trying to install pdx401upus.exe,
    it will open up the Installation Wizard and then I get the Following "Warning" Message....
    "The Destination Directory Could Not Be Determined For Photo Delluxe 4.0"
    it just gives me a box to check that says "OK", and then the Wizard Shuts down.
    Im running an HP Computer with Windows 7, Tons of HD Space, Ram, Memory ect.
    I love using Adobe Photoshop, but since I got this new computer,
    my Adobe Photoshop install disc seemed to be too old (Windows 95),
    and therefore would not load to my new Computer/Operating System.
    Any pointers, Websites, Instructions would be greatly appreciated.
    Although I'm not a "Computer Dummy" I know just enough to get me into trouble, so the simpler the instructions....the better.

    I am sorry Wwotr but I have not observed a user who has successfully installed and used Photo Deluxe on Windows 7.  Since Photo Deluxe we have released 10 versions of Photoshop Elements.  I would recommend utilizing the trial of Photoshop Elements 10 and seeing if that will fullfill your needs.  You can find more information at http://www.adobe.com/products/photoshop-elements.html.

Maybe you are looking for