No recording in Windows

Win 7 32-bit
Software Update was run on Mac before installing Win 7 and it was run within Win 7 after installing.
No signal registers in the Windows recording utility or in any application capable of recording audio. I have tried using the iMac's mic input jack, sending a line level signal with a standard stereo male mini-jack plugged in. I have also tried using my firewire audio interface with no luck. The same configuration records fine in Mac OS X. Please tell me there is a fix?

After installing Windows 7 did you install Windows drivers by inserting the Snow Leopard Install disk? Did Software Update install Boot Camp Software Update 3.1?
Bob N.

Similar Messages

  • While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

    Hi Friends,
    OS = Windows XP 3
    Database = Oracle 11g R2 32 bit
    Processor= intel p4 2.86 Ghz
    Ram = 2 gb
    Virtual memory = 4gb
    I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it..... 
    ORA-28056: Writing audit records to Windows Event Log failed Error  and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
    Please some one help me out, as i need to install on the same machine .....
    Thanks and Regards

    AAP wrote:
    Thanks Now I am able to Create a database , but with one error,
    When I created a database using DBCA, at the last stage I got this error,
    Database Configuration Assistant : Warning
    Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it.  Start the listener & Registered database service & run EM Configuration Assistant again....
    But when I checked the listener was up.....
    Now what was the problem,  I am able to connect and work through sqlplus,
    But  I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
    Thanks & Regards
    Creation of the dbcontrol requires a connection via the listener.  When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete.  Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
    Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)?  That needs to be the first order of business.

  • [Audigy 2 Zs] Dsp effects on microphone and mp3 recording on Windows 7?

    Hello.
    I have a SB Audigy 2 zs platinum.
    Is there a way to enable dsp effects on microphone and mp3 recording under Windows 7?
    I'm a musician, and I bought this soundcard for the possibility of a simple and fast recording with eax + media source.
    When beta and RC of windows 7 were out it was impossible, I've just installed Windows 7 Ultimate Edition and I don't want destroy my sistem installing and installing drivers.
    I've read this forum and I found some solutions: kx drivers, unofficial driver cd, and another driver.
    So I'm very confused. I'm not interested about 5.. Only dsp effects on microphone and direct mp3 recording.
    Is it possible or my audigy is ready for trash can?

    No solution?

  • I used All Recorder on Windows, exclusively to record streaming radio programs.  What would work similarly well on Mac?  Audacity?

         I used All Recorder on Windows, exclusively to record streaming radio programs.  What would work similarly well on Mac?  Audacity?

    You have various options, depending on your needs and the source you want to record, for instance,
    - Audio Hijack Pro (or its cheaper cousin Piezo);
    - WireTap;
    - iRecordMusic;
    In terms of free apps, you can try VLC (which won't work with certain streams, eg, BBC), iMagneto, or the audio editor Audacity in conjunction with a tool like Soundflower.
    You can probably find a few more options if you google it, but I'd say these are the main ones.

  • No sound or recording in windows 8.1 on parallels 9 OS 10.9.2

    I really hope someone can help me here.
    I have a MacBook air 13" (purchased new in 2014), running Mavericks Mac OS 10.9.2, parallels desktop 9, build 9.0 24229 and windows 8.1, all installed in march 2014.
    built in microphone and speakers on macbook air (no mic-in option)
    sound and recording audio work fine on mac OS
    No sound out or mic recording in on the Windows 8.1 side when all audio drivers set to parallels audio drivers
    When set to 'built-in' or 'default' for speakers and/or mic in Windows I get an echo even from ambient sound which gets louder without me doing anything and I have to switch to parallels audio drivers to stop the echo.
    I am unable to record, or hear audio or Skype on the Windows 8.1.
    Everything is ticked green, device drivers say they are installed, up to date and working fine.
    When try to do the 'set up mic' option, nothing happens when I do the test recording, whichever type of mic I try to set up (headset/desktop/other)
    Apple Store Genius bar said they cant help as problem isn't with the Apple side but with 3rd party software
    Parallels say I am past the 30 day support and will have to pay for any further tech support
    Microsoft say that because it is an Apple device it isn't their problem.
    I am stuck, having bought the machine specifically to record into a Windows based programme and have followed all troubleshooting option on all three websites.
    Can anyone help please?

    I reinstalled Parallels Tools. I followed kb 112477, checked sound on my Mac (it is set as output - internal speakers - built in; input - internal microphone - built in)
    Went into Parallels desktop/preferences/hardware/sound
    'connected' is ticked
    When setting to input-built in mic and output-built in output I get an increasing crescendo echo from ambient sound, and I have to press mute to stop the sound
    Same increasing crescendo echo happens when I set input and output to default input and default output respectively.
    Audio configuration checked in Windows virtual machine - shows parallels audio controller. another section in device manager shows that audio inputs and outputs are set to Parallels audio controller for microphone and speaker.
    The MBA has built in mic, no separate mic input, but it seems to be interfering with a loop of sound
    KB article 114055 - sound is fine on Mac OS X side, no yellow exclamation marks. As stated in response to trying KB 112477, with built-in as input and output I get a crescendo of ambient echo, only way to silence it is to mute sound on keyboard.
    3rd solution (Parralels, Maheeshwar)
    Please try the steps as provided below which may help you in resolving the issue :
    1. Start virtual machine.
    2. Take a Snapshot (virtual machine -> Take Snapshot).
    3. Press "cmd"+"R" combination, type 'regedit' and Return (Enter) to run Registry Editor.
    4. Locate and highlight 'HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\C lass\{4d36e96c-e325-11ce-bfc1-08002be10318}' key and look for 'UpperFilters' value in the right box.
    5. Highlight 'UpperFilters' value and delete it:
    6. Expand 'HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\C lass\{4d36e96c-e325-11ce-bfc1-08002be10318}' key and check every subkey for 'KS' value. If you find it, delete it.
    7. Re-install Parallels Tools (in Parallels Desktop menu bar: Virtual Machine -> Reinstall Parallels Tools) and reboot your virtual machine.
    Also: - Start -> in the search box type "Control Panel" -> in View by choose "Small icons" -> Sound - Browse to "Communications" tab - Select "Do Nothing" - Press "OK" -
    In the recording tab -> Right-click Microphone -> Properties -> switch to Volume tab and set it to 100% -In the Lync options also set Microphone vol. to the maximum.
    Okay, so this last option made the mic work! Thanks, I did see that solution but it looked too complicated to try - I don't know what I've done, but it has worked and the mic works now.
    BUT, when I playback there is the same crescendo echo - it seems to record sound, play it out and record what's playing at the same time
    So now the problem is
    "eching sound when audio played" - I will re-post under a different heading.
    Thanks for the help,

  • CD-R drive or CD-RW drive is not recognized as a recordable device Windows 8

    Hi
    I have Windows 8 installed and if I right click on my CD/DVD drive my Recording tab is missing in Properties. Basically I can read any CD/DVD but I cannot write a CD/DVD. I have 3 CD/DVD drives on my computer. I found the following solution on this problem:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;316529
    However this is for Windows XP and I would like to find the solution for Windows 8. Basically I cannot find the register Drives/Volume GUID in Windows 8.
    Any help would be appreciated.

    Hi, 
    Would you please first check whether your DVD/CD drives or the CDs you inserted support burning?
    Meanwhile, for missing feature of CD/DVD drive issue, the driver could be the most possible cause. 
    Please go to manufacture's of your CD/DVD drive, download the latest driver applied to Windows 8 and install it to check the issue. 
    To avoid the cause of improperly loading the driver, I suggest we disable Windows 8 fast boot to see what's going on: 
    Please refer to this article: Disable Windows 8 fast startup (hibernate file)
    http://nvidia.custhelp.com/app/answers/detail/a_id/3152/~/disable-windows-8-fast-startup-(hibernate-file)
    To further help you, please upload your system information into skydrive or similar network drives and post back the shared link here for my research. 
    Kate Li
    TechNet Community Support

  • Can I repair the Master Boot Record (MBR) or Volume Boot Record (aka Windows boot partition) for Windows XP using Windows Vista/7 commands?

    I have an SSD drive whose file system is corrupt and unreadable and it's OS of choice is Windows XP SP3 32-bit. I don't have a Windows XP disc.
    Is it possible to repair the Master Boot Record (MBR) or Volume Boot Record (VBR) using a Windows Vista or 7 Recovery Disc? What about a Windows PE disc?
    I researched around the Internet and found a command in Windows PE called bootsect (http://pcsupport.about.com/od/bios-booting/ht/bootsect-nt60.htm) that can repair both older and new Windows Volume Boot Code (NTLDR or BOOTMGR). The link states that the
    bootsect command does NOT fix the MBR. Even the technet site here lists a reference to bootsect and that it can repair the MBR of both old and new versions of Windows (which doesn't appear to be correct). Can I use bootsect to restore the VBR of XP?
    If bootsect cannot help me, then what is its purpose? Possible ex: Someone has a dual-boot XP and 7 system, the user uninstalls XP, and then uses bootsect to write BOOTMGR to the VBC.
    I would appreciate any insight. Again, I don't have an XP disc. But I do have a WinPE disc and Win 7 Recovery disc and I was hoping I could fix my XP MBR and/or Windows VBR with one of the two.
    Thank you.

    Checked these ?
    http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/bootcons_fixmbr.mspx?mfr=true
    http://pcsupport.about.com/od/fixtheproblem/ht/repairmbr.htm
    Arnav Sharma | Facebook |
    Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
    reading the thread.

  • Problems with microphone/recording in Windows 7

    Daughter has dyslexia. Learning program requires Windows. Added Parrell and Windows so I could run it. Has been working fine for 2 weeks and now the recording feature isn't working. I've tested on the Mac side - microphone works fine. Test on the Windows side; not working using Recording and play back. Suggestions?

    ELKO,
    Did you use the full three step way?
    Uninstall, run the Cleaner Tool, and reinstall?
    http://www.adobe.com/support/contact/cscleanertool.html
    Presuming CC(2014), you may try to restart the Creative Cloud application by quitting and relaunching it.

  • When i cancel one dvd recording the windows stop answering....

    ... And the dvd dissapear..... FOREVER!
    I Tryed this:
    -Click on the cancel button -Then the window stop answering and didnt even stop recording my dvd-
    -Reinit the finder... NO WAY. Do not run
    -Force the end of the finder process... NO WAY... Do not run
    -Reinit the computer....Well then the dvd is not there!!!!!! on the finder!
    I wonder how can i "mount" the dvd when is not visible on the finder
    Now i think you can access the unit with the disks utility... but this is one "arcane" place to find your dvd... I am sure many users never ever opened that tool
    Can i mount the dvd from the UNIX shell? -sh-. Anyway this is not a good solution for the average user BUT COULD be ok for me
    ... And reinit the computer is not a "nice way" as well
    Thank you for reading my long post
    Bruno

    hello xbxjnky, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • How do i customize my browser window to my recorded screen window

    Hi,
    I am new to adobe captivate. I created a project using a
    custom size window of 800*500 pixels and after recording when i
    published it there is empty space between my recorded project and
    the web browser. I want the web browser to also be the same size
    basically i want the screen to look like a text pop up; when the
    end users, click the html link which i provide.
    Any help is appreciated
    Thanks
    Ramya

  • Create OD Kerberos record with Windows .local domain

    I am in the process of setting up my open directory master that will be working in a golden triangle with our existing windows domain. Our windows FQDN ends with .local and all dns is running on this domain.
    I am unable to create a kerberos record for the open directory because of the .local domain. The xserver thinks the FQDN is a Bonjour name and will not create the record.
    If anyone has an Idea on how to work around this problem I would apreciate your help.
    Thank you

    OD uses AD kerberos

  • Unable to record "Arrange windows" in new action

    I used to have ctrl-shft-F12 and Ctrl-F12 to toggle between two panel vertical and consolidate all to tabs in my actions (no I had no backup of this)
    I had it working in CC 2014, but after a reinstall, I cannot get these actions recorded. The Window -> arrange -> (any option) will not register in the recording.
    What am I doing wrong, it worked before?

    You could use Insert Menu Item

  • Using webrtc no sound is recorded on Windows 8.1

    Trying to use webrtc on either Firefox Hello or another website making use of webrtc features (such as https://tokbox.com/opentok/quick-start/demo.html) for communication will make Firefox show the dropdown to select a microphone and authorize it's use. The connection is established just fine, I can hear other people talk (or myself if I connect with another browser), but my own microphone is not picked up. I am very confident that my windows settings as well as those in driver's application are correct, but I'm happy to try aynthing out.
    I'm thankful for any help you can provide.

    Can you check what the sample rate of the input device is set to?
    If you go into the Sound part of the control panel, select Recording, and then Properties on the default mic you'll get a properties dialog up.
    On the properties dialog, go to Advanced, and check what the Default Format is.
    Check that the Hz is either 48000Hz or less (the channel and bits shouldn't matter).
    Please let us know if that helps or not.

  • Please,how do I open a DVD (recorded in windows) with a thumbs file?

    Hello
    a question please:
    a few years ago (6/7) I recorded a DVD of pictures in my old Windows
    Now on my Mac, I can not open the contents of the DVD,a Thumbs.db file
    What and how do I convert the format?
    Thanks for your help

    A .db file extension indicates it's some type of database per:
    http://filext.com/alphalist.php?extstart=%5ED
    I would say your best bet is to contact the FilemakerPro developers to see if they can import that file format. You can find information for FileMakerPro at:
    http://info.filemaker.com/GL-en-US-FMP12-LP-PPC.html?source=ppc
    They make versions for Windows & OS X, specify what you want to do and see if they can help you out. 

  • Single record view window increases !

    Hi !
    I use vesion 1.1.2.25-79.
    Opening the single record view on an record of a table the window is of "normal" size. I enlarged it a little. to see more columns of the record.
    From now on the window is increasing every time I open the "single record view".
    A bug or feature ?
    Regards,
    Heinz

    It certainly seems like a bug to me - the window gets wider each time it is opened (regardless of whether you have resized it first) and it eventually gets wider than the screen. Thankfully it does start from it's previous size, so you can resize it down to keep it usable next time and it does reset when restarting SQL Developer, but it is another annoyance :(

Maybe you are looking for