No recovery option is showing up

hi im having problems with my toshiba satellite L745 and it wont load my windows 7..it always stops on black screen with flashing cursor..i keep trying the recovery option thing but no hdd recovery option is showing up..please i need some advice

try fn and f8 key at the same time.
I will look for the windows 7 repair disc.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Similar Messages

Option key shows Win partition, can't start it

Greetings all.
I have 10.6.8 and Win7 64-bit installed on internal iMac HDD.
When I attempt to access the Win7 partition on startup using the option key, it shows the list of boot devices, Mac and Windows, but selecting the Windows partition does nothing. The screen stays on the grey selection screen and will no longer accept keyboard or mouse inputs.
If I select the MacOS partition on startup, it boots normally.
If I select Win7 in the Mac Systems Preferences as the Boot Device, the machine goes to a grey screen on reboot and stays there.
If I use Boot Camp assistant to launch the Windows installer, the Win7 partition boots normally. If I select Win7 in the Windows Control Panel and reboot, Windows boots normally.
Two changes were made to the system recently. I updated to 10.6.8 and then the next night, Windows7 Service Pack 1.
Any help would be appreciated.

It it were me I would try to start from the Windows 7 installation disk and use Startup Repair. It worked for me when I had a startup file that was corrupted.
http://windows.microsoft.com/en-US/windows7/Startup-Repair-frequently-asked-ques tions
Startup Repair is a Windows recovery tool that can fix certain system problems that might prevent Windows from starting. Startup Repair scans your computer for the problem and then tries to fix it so your computer can start correctly.
Startup Repair is one of the recovery tools in the System Recovery Options menu. This set of tools is located on your computer's hard disk and on the Windows installation disc.

ThinkPad Edge unable to use System Recovery Options

I am helping a friend with a laptop problem. The HDD has had problems in the past and already been restored once. Now it won't boot and I'm unable to access the f8 boot options in order to use Safe Mode. I was able to boot using Kaspersky, but it doesn't show the whole HDD and files.
I've given up trying to access files and just want to try to get the PC working again. I tried using the System Recovery Options and doing a restore, but after it launches I get a message that says "You must log in in order to access System Recovery Options."
Any suggestions? Thanks!

Good day and welcome to the community.
It may help others provide advice with a bit more information about the system you're working on. TP Edge model, windows version, etc.
Cheers.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

What recovery options are available in Windows 10?

QuestionWhat recovery options are available in Windows 10?
AnswerNote: For recovery options in Windows 8, please see this article.
Windows 10 has a variety of recovery tools to help you recover your computer when there's a problem. These include system restore, reset and keep your files, reset and remove everything, and go back. This article explains each feature so you can know which to use.
You can watch this video for an overview of your recovery options or read the descriptions below.
System Restore
System restore rolls your system files back to a restore point from a previous date. You can make restore points manually, but Windows will also make them automatically. This will undo system settings, changes from Windows Update, and changes from newly installed software (including removing software installed since that restore point).
Your data and documents won't be changed. This makes system restore a great place to start when you're having a problem and don't know how to fix it.
To learn how to perform a system restore, read this article:
How do I perform a system restore in Windows 10?
Reset while keeping your files
Performing a reset while keeping your files removes all your installed desktop applications, keeps your data and documents intact, and rebuilds your Windows files.
This is a good process to try if a system restore doesn't fix your issue.
To learn how to perform a reset while keeping your files, read this article:
How do I reset my Windows 10 computer to factory defaults?
Reset and remove everything
Choosing to reset and remove everything removes all applications, removes your data and documents, and rebuilds your Windows files. The primary difference between this and reset while keeping your files is that removing everything also removes your files and documents.
This is a great final troubleshooting step in many cases. It's also useful if you plan on giving your laptop to a new owner.
To learn how to perform a reset while keeping your files, read this article:
How do I reset my Windows 10 computer to factory defaults?
Go back
If you just recently upgraded to Windows 10, you might be able to go back to your previous version of Windows using Windows 10's go back feature.
This option will be available if you upgraded within the past 31 days, haven't performed a reset, haven't deleted the backup Windows folder, and haven't created any new local accounts. It gives you the ability to revert to an older version of Windows if you're having problems with Windows 10.

Hi Gertino,
Unfortunately, the IMAQ drivers will not run on Windows Embedded. For any other drivers or modules you're interested in, the readme will show which operating systems it supports. However, we do have this module that allows you to develop for certain Windows Embedded operating systems, including our Touch Panel Computers. Using that module, you could program the Touch Panel and certain other Windows Embedded computers as displays for a vision acquisition system.
Regards,
Daniel H.
Customer Education Product Support Engineer
National Instruments
Certified LabVIEW Developer

Re: Equium L40-14l - System recovery option missing

Hi All
I have a Equium l40 14l that I've finally decided needs to be restored to " out of the box " status.
I can boot to the system recovery option page but the widely mentioned HDD recovery option has been replaced by Restoring the Complete Windows Operating System option.
When I select that all it does is tell me that if preinstalled files are damaged you can use the product recovery dvd-rom. All I can do is click OK and return to the previous screen.
I've run some partitioning software and the hidden partition shows up there. I didn't get a recovery disc with the machine as it had the hidden restore partition.
I didn't make a back up when I first booted the machine. I'm thinking now that it would have been a good idea but as I thought I had the hidden partition to rely on I didn't bother.
Any ideas if there's a way I can get the system recovery to show the option for HDD recovery?
Thanks in advance Tom

Guess what I found?
A product recovery disc. I've re-installed and am now in the process of removing all the junk that comes with it.
Happy days :-)
Cheers Tom

Doubt with usb recovery options

Hello,
I have a satellite E45t-A4100 and I all ready create a usb recovery with recovery media creator. And i wanted to prove if the usb recovery starts well and if everything it's ok but i have two doubts.
when the usb recovey starts, it shows a white window with two options:
1. Start recovery wizard
2. Select other recovery options
If i select the first option a warning message apears. It says:
"this process will erase and rewrite everything. Are you sure you want to do this? ( says something like this)
So, do i have to choose this one? I mean, do i have to choose the first option?.
This option erase all?, i mean, all the partitions too? or it just erase the C: parrtition and return everything to the factory values?.
So, what option do i have to choose? or can i choose any of both?
Well, i sorry for my wrong writing. Im from Spain. I write as i can
Thankyou very mucho for your attention
Regards, Cristina
Solved!
Go to Solution.

The answer to your question is Yes, Cris. Your computer will be exactly the same as the day you first turned it on including the Operating System it came with and all the Toshiba Drivers and Utilities. I hope you enjoy your new computer.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

ORA-00274: illegal recovery option UNTIL

Hi,
Oracle 10.2.0.1
Windows XP
One of my datafile ask for media recovery when i take its corresponding TS online.
so i ran the below command to recover till specific time, but reflects error :
SQL> recover datafile 7 until time '2009-11-23:10:15:00';
ORA-00274: illegal recovery option UNTIL
I have searched the web, shows that its an syntax error
where is mistake done ?
With Regards

user640001 wrote:
Hi,
Actually, i want record in the table upto 22-11-2009, 10:15:00 AM, so i want specific time recovery on that datafile
but could not able to do so...getting below error
SQL> recover datafile 7 until time to_date('23-11-2009 10:15:00','DD-MM-YYYY HH12:MI:SS');
ORA-00274: illegal recovery option UNTIL
With RegardsAnd you think that your datafile will be usable like this? Please find someone around you who knows about the recovery and can help you. You may cause some serious damage to your db like this.
Aman....

In Options -- General -- I want the option to "Show my windows and tabs from last time" AND "Show my homepage", but that choice isn't given. When I open a new tab, I'd like to see my iGoogle page, not a blank screen. Hope you can help. D

In Options --> General --> I want the option to "Show my windows and tabs from last time" '''''AND''''' "Show my homepage", but that choice isn't given. When I open a new tab, I'd like to see my iGoogle page, not a blank screen. Hope you can help. D

You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system

HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system
Please help, if any one knows any solution.

Hi @Firoskhan,
Welcome to the HP Forums!
I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Data Recovery Options?

In the process of transferring from a POP3 Account to IMAP, I deleted a POP3 Account and lost a lot of email's I still need. I've seen some data recovery options such as File Salvage, but I'm wondering if there are any cheaper options out there? Thanks for the help.

What an awful thing to have happen! Especially on such a special and happy day! You have my deepest sympathy.
From what I understand, as long as the data has not been overwritten, you should be able to recover it. I will have to let the explanation of how to do this rest with people more knowledgeable than I am, as I have never had occasion to have to do this. But I have no doubt that they will post the appropriate resources.
I have been told that the only way to destroy a hard drive so that you can't recover the information is with a hammer. That said, it could still be costly. But unless your new backup partially wrote over some of your previous backup, it should be recoverable.
Good luck, and have a happy honeymoon--don't let this spoil it! And the best of everything for your future!

I can't accessed system recovery options after the repairing process was interrupted.

although it's not my PC, i'm still concern about it (it's actually a public computer in our library). I actually tried to repair it using the system recovery options of windows 7 with thinkvantage technoliogies but i interrupt it because maybe someone will caught me and i will be mistakenly be liable. and the result is after i restared it, it restarts over and over again, with BSOD appearing for a split second. i tried to use disable autorestart on system failure feature, and i saw the BSOD. but the real issue is i can't go through the recovery options, only until the part when i'm asked to select a keyboard input method, then the next part is this message: "You must log in to access System Recovery Options. If you are having trouble logging in, please contact your computer administrator for assistance. Click OK to restart the computer." anyway, this is the BSOD says:
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Disable or uninstall any anti-virus disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
Technical in formation:
*** STOP: 0x00000024 (0x00000000001904, 0xFFFFFA800690D840, 0XFFFFFFFFC0000102, 0x0000000000000000)
I hope this problem will be solved as much as possible. thank you in advance. and i also don't know what model of this Lenovo all-in-one PC is. but i think this is 3318F9U, and its i forgot its BIOS version, and i don't know how to access it. and also, i'm not sure if there's a preloaded Superfish in this all-in-one PC, maybe the vulnerability started it. because i recently read an article regarding the Superfish's vulnerability.

Hello and welcome,
Please remeber that this is a peer-to-peer forum (users helping each other) not the Lenovo support site. There is some Lenovo presence, but if you need urgent support, please try your local support office:
Philippines
THINK-branded products
Tagalog, English
1-800-8908-6454 (GLOBE subscribers), 1-800-1441-0719 (PLDT subscribers)
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How do I get the "auto portrait/landscape" option to show during printing in Adobe Reader Touch

When I print using Adobe Reader Touch, the "auto portrait/landscape" options does not show up. As a result, all pages in a document are printed in the same orientation even if they are not all of the same orientation in the file itself. I don't believe this is a printer issue because if I use Adobe Reader X (v. 10.1.6) on the same computer/printer, the auto option does show up and the documents print as desired. I use Windows 8. As the video quality of Adobe Reader X is extremely blurry in Windows 8, I would like to be able to use Adobe Reader Touch exclusively. How do I get the latter to give me the "auto portrait/landscape" option during printing?
Thank you,
Pelle

Hello Pelle,
Thanks for the feedback. Our printing code in Adobe Reader Touch doesn't have that capability right now, but since you mention it we should probably do what you're requesting by default. I'll put that into our backlog for a future update, but I can't say yet when it will be available.
In the interim, if you have pages that are different orientations, you can print them in blocks manually to get what you want, but I understand that's a hassle.
Dennis

I've read two solutions to my problem and neither worked. I can't get the repeat option to show in some events, though it does appear in others.

I can't get the "repeat" option to show in some events, though it does appear in others. How can i get it to show when I need it? (I read two "soluntions" that supposedly worked, but neither worked for me.)

Greetings,
I can't say I've seen that behavior before. I' be curious to see a screen shot of it in the edit mode where you edit the fields.
Beyond that I'll offer generic troubleshooting steps:
Go to Apple Menu > System Preferences > Language & Text > Formats > Region. Region should be set to the country of your choice. Do not have it set to "Custom" as this can have unexpected results in the iCal window.
If that doesn't resolve the issue:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
--- NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard. You will see "Library" in the menu.
4. Launch iCal and test.
If the issue persists:
1. Go to iCal > Quit iCal
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
--- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
3. Launch iCal and test.
Hope that helps!

Update notification shows there are updates but when I click on the update option it shows a blank screen

The update option on the app store shows a notification that I have 'n' numbers of updates but when I click on the update option it only shows a blank screen. Even after updating the apps individually from the purchased option, the update option still shows a blank screen instead of "All you applications are up to date". Please help.

Many people are having this problem for the last couple of days. According to Fly150in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store.

Why is the airdrop and airplay option not showing in my iphone 4s ?

airdrop and airplay option not showing

That link is addressing only iOS 7 in general, not the iPhone 4S specifically. I have already answered your question here: airdrop and airplay option not showing iPhone 4S, iOS 7.1.2. It is the same answer as what wjosten have provided in this post. Air Drop is compatible with iPhone 5 and later.

No recovery option is showing up

Similar Messages

Maybe you are looking for