No redetermination of organizational data when change the activity partner
In the Business Activity we have the determination Rule for Org.Data Model "14000161 - Org. Data Re. Master Data".
When we create a Business activity and enter the activity partner, the organizational data is determinated correctly.
The problem is that, when the activity partner is changed, the organizational data not is redetermined.
Anybody Knows how to do it?
Thanks.
Best regards,
Dani Sevilla.
Hi Daniel,
Did you try "propose alternative"?
you can read at http://help.sap.com/saphelp_crm40sr1/helpdata/en/82/adc9531f1bc5419d0785617d6a59c2/frameset.htm
also the BAdI mentioned can help you.
Eyal.
Similar Messages
-
What is the best way to re-install my apps data when changing the hard disk
My MacBook (120Gb disk) is finally full and I have ordered a 500Gb disk to replace it.
I am fine with changing over the disk but can anyone tell me the best way to reload all my apps and data from the present disk please?
I have a Time Machine backup on a Network disk, a copy of SuperDuper and also my original 10.5 OSX install disks.
ThanksRoger, since you have SuperDuper, I think the easiest thing to do would be to make a clone of your current hard drive to the new one when it arrives. You will need an external enclosure for the new drive; make sure it's formatted to Mac OS Extended (Journaled); Disk Utility will do this for you. Then connect that new drive via firewire or USB, and create the clone from your current drive using SuperDuper. Next, remove the internal drive from your Mac, insert the new drive and boot up. You can then place your older drive in the external enclosure to use for extra storage, though it won't be large enough to use as a cloned backup with SuperDuper.
Good luck! -
UNCAUGHT_EXCEPTION runtime errors when changing the PO
Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quareHi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_BBP_PD_ABORT
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
caught,
which led to a runtime error.
The reason for this exception is:
Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare -
Update weight and volume when changing the quantity
Hello ALL,
For some configurable items, those whose weight and volume depends on configuration, when changing the quantity at set level, weights and volumes are not calculated again and order item is saved with wrong data about weights and volume.
when ever changing the quantity we will get a message - " Changing date/quantity may result in different BOM Please configure"
if we do explicitly by clicking "Item Details Configuration' then Weight and Volume will get update automatically.
my requirement is Weight and volume should get update automatically when changing the quantity with clicking on "Item Details Configuration'.
could you provide any OSS notes available for this or any help to achieve this functionality.Dear Prathap Naidu P,
Did you solve this issue?
Because I have the same problem, and I was looking for hints.
Thank you so much for any help.
Best regards,
J.Flanders -
I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works fine in our side (Timezone,kolkata ,india even for Timezone,slvaniya,USA) but our USA client is telling that on changing the date it not starts from start-up sequence.Can anyone plz suggest the reason for it.
This is the code which we have used.
//////////Return if it is first time for the day or not//////////////
+ (BOOL)isFirstTimeToday {
BOOL result = YES;
NSDate *now = [[NSDate alloc] init]; /// represents the current time
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: now];
NSDate *today = [gregorian dateFromComponents:components];
[now release];
[gregorian release];
NSDate *savedDate = [[NSUserDefaults standardUserDefaults] objectForKey:LAST_TIME_VISITED];
if (savedDate) {
if ([today earlierDate:savedDate] == today) {
result = NO;
return result;
////////Stores the date/////////////
+ (void)userDidVisitReenforceScreenToday {
[[NSUserDefaults standardUserDefaults] setObject:[NSDate todayAtMidnight] forKey:LAST_TIME_VISITED];
////////////What [NSDate todayAtMidnight] stores/////////////////////
+ (NSDate *)daysFromNowAtMidnight:(NSInteger)nOfDays {
NSDate *date = [NSDate dateWithTimeIntervalSinceNow: (86400*nOfDays)];
NSCalendar *gregorian = [[NSCalendar alloc] initWithCalendarIdentifier:NSGregorianCalendar];
NSDateComponents *components = [gregorian components:(NSYearCalendarUnit | NSMonthCalendarUnit | NSDayCalendarUnit) fromDate: date];
NSDate *dateAtMidnight = [gregorian dateFromComponents:components];
[gregorian release];
NSLog(@"dateAtMidnight : %@",dateAtMidnight);
return dateAtMidnight;
+ (NSDate *)todayAtMidnight {
return [self daysFromNowAtMidnight:0];
Please Suggest.. -
I created an application and in that application if date is changed the application starts from splash screen on re-entering and if date is not changed and u re-enters the application then it open in page where u leaved.It works with iPod not with iPhone
Try posting in the developer forums to see if you can get some assistance,you'll have to be a registered developer for access though.
developer.apple.com -
SPL block when changing the Address manually at Sales order level
Hello all, I hope every one doing well
I am facing one problem in SAP system, when I am chanigng the Partner address at sales order level , system giving the SPL block , without screening even though the customer is a good customer.
I checked in Img: GTS -> SAP Compliance Management->"Sanctioned Party List Screening" Service->Control Settings for "Sanctioned Party List Screening" Service->Sanctioned Party List Screening Strategy for Customs Docs tested with as " Status check of unchanged Addresses( Partner Address) and New check of changed Addresses.
I didn't find any difference. Sales order getting block for the above cases when changing the Address at Sales/Create document level.
Please let me know how to resolve it.
Is it related to configuration if yes how ? pr
do we have any OSS Notes to Rescreen the Sales orders with compliace even though changing the Address at sales order level ( ship to party address changes like Name, city, email id, of fax )?
or
do we need to do the Enhancement for Rescreening when changing the ship to party adress (changes like Name, city, email id, of fax )
manually at sales order level ?
Thanks in Advance
NVRhello Sameer,
1. Whether your Embargo service is activated for the Country of Plant from which your order is getting shipped. -- Yes I have activated the Country under Embargo list.
2. Whether the partner function for which you changing the county detail has been added in into the Partner group which is assigned to Embargo services.( GTS)-- Assinged the Sold to Party ( AG) for PGEMB2- Partner group
3. Whether the country which u putting as Embargo has been maintianed under Embargo country list,
- yes
What I am doing exactly is , I am creating sales order with US customer master , but I am chaning the Country Key as Embargo country ( Ex: CU, SY, IR) at VA01 , or VA02 level Sales order header Partner tab level for Sold to party address ( changing only country key as embargo country) , not to ship to party ( ship to party still US country key only), at that time system not blocking the sales order as embargo.
please let me know if any once come across this sistuation..
Thanks in advance
NVR -
If I download a movie today, but will not be watching it for a few weeks (i.e. when overseas) - when does the 'activation' period start? Do I have 48 hours from the download date or when I first watch the movie?
You have 30 days from when you download it, but when you then start watching it you have 48 hours (24 if your account is US based) to finish watching it before it expires.
-
Locale Input changes on Mac OS X Lion when changing the view state
On Mac OS X Lion, the following code results of changing the locale input when changing the view state. If you set the input locale to Pynin, then run the application, then click on "go to the test 2", the input locale changes back to english. This is obviously not the correct behavior (the input locale should stay the same as defined on the computer).
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx">
<fx:Script>
<![CDATA[
protected function gototest2(event:MouseEvent):void
this.currentState = "test2";
protected function gototest(event:MouseEvent):void
this.currentState = "test";
]]>
</fx:Script>
<s:states>
<s:State name="test" />
<s:State name="test2" />
</s:states>
<s:Button label="go to test" includeIn="test2" click="gototest(event)" />
<s:Button label="go to test2" includeIn="test" click="gototest2(event)" />
<s:TextInput includeIn="test2" />
</s:WindowedApplication>Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.
-
IMac freezes when changing the screen saver
Hi all:
I originally posted this in the "Using Mac OS X" forum (iMac freezes when changing the screen saver, but thought I'd post here as well since the issue arises on a freshly installed OS.
We've got three 350MHz slot-loading G3 iMacs (with 512MB RAM) which we're planning to use for basic word processing. The install of Panther (10.3.5 from black retail cds with 10-seat volume license) went fine on the first two. Ran the updates to 10.3.9, installed MS Office 2004, everything working great (they're a little slow, but after all, they are only 350 MHz).
On the third, the first problem we noticed was the computer would lock up whenever we changed the screen saver from the default (Flurry; Computer Name also works). It continues to do so even after: repair permissions; repair disk; Disk Warrior; reset pram; reset nvram; reset pmu; change RAM; change hard drive; erase hard drive; write zeros to hard drive; reinstall with different set of retail CDs; trash preferences, and delete cache files. (If there's anything I've left out, it's in the other thread).
Now we've noticed that we can't create any new user accounts. We've thought about putting this one in production, just warning the user that they can't change the screen saver, but god only knows what will turn up next.
I'm starting to think it's a logic board issue, but could it be that selective? And would you see the same problem with another hard drive and different install discs? Am I missing something?
BTW, there's a crash log with the other thread.
Andrew
Dual 2.0 GHz G5 Mac OS X (10.3.9)I'm going to mark this one as answered.
I removed the hard drive from the iMac, and put it into another 350 MHz iMac, and everything works great. I can select any screen saver without having it freeze, create new accounts, whatever my little heart desires.
In checking the history of the problem iMac, there was an assortment of problems with booting (both from the hard drive and from the CD-ROM drive) which were never satisfactorily resolved. The problems just seemed to go away after sitting unplugged for a few days, as much as for anything we actually did to it.
Now we just have to decide whether it's worth fixing, or using it somewhere in a non-critical role with OS 9 installed.
Cheers,
Andrew -
Always assets links are missing when changing the location.
Hi community: Can you share your ideas with me?
Since adobe muse older versions, asssets files are missing when changing the location or computer. For example develop some project on "desktop" when it move to another location( ex: Another partition or folder with different name), assets says links are missing, we have to relink all assest, is there are any way to fix it? why is that keep happenings? when i design muse templates to sell, it is serious problems to me .
Can you help me, thank you community!Hi,
Oracle have a tool for precompiling JSP's it's called ojspc
You can then turn JSP compilation off on the server.
Here's a batch file that I use.
Brenden
@echo off
set ORACLE_HOME=C:\[Jdev_install]\jdevstudio10133
if not exist %ORACLE_HOME%\j2ee\home\ojspc.jar goto error
java -Djava.compiler=NONE -Doracle.home=%ORACLE_HOME% -jar %ORACLE_HOME%\j2ee\home\ojspc.jar -extend com.orionserver.http.OrionHttpJspPage yourapp.war
goto end
:error
@echo ERROR: %%ORACLE_HOME%%\j2ee\home\ojspc.jar not found. Please set ORACLE_HOME to point to an OC4J or OracleAS instance and retry.
:end
if "%OS%" == "Windows_NT" endlocal -
When changing the drive letter for the ipod itunes still wont come up
when changing the letter a couple of times itunes wont come up and trying to restore it nothing happens i have reinstalled itunes like 12 times and the 6/28/06 software messed me up i dont know what to do when i turn on my ipod its like i barley got it from the store when i hook it up and change it when i take it off it does that what should i do i need some help please someone i cant do this anymore anything out there
Try doing a Ctrl-Alt-Del, and in Task Manager click on the Processes tab. End the iTunesHelper and iPodService processes. Then reconnect the iPod and go into Disk Management, and the iPod should show up. Change the drive letter to something other than C, then eject the iPod and restart the computer. When you reconnect it you should be able to get it recognized.
-
BB 9900 - Activation failed. An error was encountered when sending the activation transmission
Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and has no issue from there side. Let me know why this issue persists. Error 1: while trying to configure emailActivation failed. An error was encountered when sendig the activation transmission Error 2: Whild using internet.Browsing over the mobile network is not included as part of your current sercie plan. To browse the web, you must use Wi-Fi or contact your service provider to change your service plan. Regards,Sunil K
sunilkesavareddy wrote:
Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and has no issue from there side. Let me know why this issue persists. Error 1: while trying to configure emailActivation failed. An error was encountered when sendig the activation transmission Error 2: Whild using internet.Browsing over the mobile network is not included as part of your current sercie plan. To browse the web, you must use Wi-Fi or contact your service provider to change your service plan. Regards,Sunil KAre you sure you are connected to a BIS plan (BlackBerry Internet Service) ? Regular data plan will not work, ask Airtel if it's a BIS plan. -
Change the active microphone in AS3
Is there a way to change the active microphone in AS3 without using the SecurityPanel.MICROPHONE? All of my attempts stop all microphone activity, even if triggered by a button click.
Using
var mic:Microphone = Microphone.getMicrophone();
works fine, them if at a later point I do
mic = Microphone.getMicrophone(newIndex);
and poll mic.activityLevel - the level is always -1.
If I switch back to the original mic, it works again, which ever was originally selected in the security panel works. This is with two working mics, and I have switched which is selected via the security panel to make sure it is not mic specific.
Is this a security risk and not allowed? Once you initialize one mic, is that what you are stuck with? I have switched cameras in air, but that was air.
- as a side note, the reason for needing this is we get feedback whenever a user is using the computer speakers and is on firefox. I have set loopback to false and I have brought the SoundMixer level down to 0, but as soon as the security panel microphone window pops up, the level comes up and loopback acts as if it was set to true. When the window closes, I get control again.Figured it out. It looks as though the Microphone.activityLevel is -1 until you add a SampleDataEvent listener. You do not need to add this if you are streaming to the server. In my tests I was updating my reference to the mic for checking the activityLevel in an update loop. I did not update the SampleDataEvent lsitenre since I was not actaully recording, just checking the mic input level, and did not think it needed tobe in place.
It seams possible that the Microphone checks that it either has a SampleDataEvent listener, or is connected to a server before updating activityLevel, I just have never seen that kind of thing done.
I am not certain this is the case, but it is what it looks like. If anyone has more infomation, please share. -
Since upgrading to firefox 5.0, countdown timers at the various file locker sites will no longer countdown when the page is not the active page. I am sure it is not a site-side change as ALL the sites countdown timers freeze when not the active page. This has only happened since the upgrade.
For reading only as Bugzilla is Not a forum.
[https://bugzilla.mozilla.org/show_bug.cgi?id=652472 Bug#652472] - Higher setTimeout/setInterval clamping in inactive tabs breaks countdown scripts
In mean time you can try opening those links in a new window instead of a new tab.
Not all sites are affected as sites like Megaupload, Filesonic, depositfiles, Rapidshare work fine.
Maybe you are looking for
-
i am new to icloud. i would like to manage all our household email accounts through icloud. i currently use gmail. is there a way to route all gmail messages through an icloud email so i do not have to change my email address? also how do i creat
-
Extremely slow time machine backup
Hi, I tried my first backup on snow leopard and I found it extremely slow compared to leopard. What used to take 20 minutes in leopard now takes 3 to 4 hours. This was my first backup on snow leopard. Is there any known issue for slow TM backup? If n
-
Which SharingReference I need to add at a portal service for these packages
Hello, I have written a portal service, not at the Dynpro, environment which uses these imports: com.sap.tc.webdynpro.progmodel.api.IWDNode; com.sap.tc.webdynpro.progmodel.api.IWDNodeElement; com.sap.tc.webdynpro.services.sal.url.api.IWDCachedWebReso
-
To validate the date in Unix using Oracle
sqlplus /nolog <<EOF > /dev/null CONNECT $ORAUID/$ORAPWD WHENEVER SQLERROR EXIT 1 SELECT TO_DATE('$DATE_INPUT', '$DATE_FORMAT') FROM DUAL; EOF if [ $? -eq 1 ]; then echo "Error: Wrong Date Format - $DATE_INPUT" exit fi
-
Output Module Template missing - AE CS5
Recently installed After Effects CS5 -- on every startup of the program, I get an error message: "You have at least one output module template that refers to a missing output plug-in. Please check your Output Module Templates." Accepting this prompt