No Registry records of ID in Windows 7 (64bit) after installation

i moved my problem from another discussion into this new one... i don't know if it is normal, but i have just installed ID and PS from my CS5 pack, restarted the computer and checked Windows Registry (through "regedit" in command line) if there are some records of the applications. suprisingly there is only Photoshop in HKEY_LOCAL_MACHINE under SOFTWARE and no INDESIGN. that is the same problem i had before the installation when i had had to uninstall CS5 because it hadn't worked properly and i couldn't find any records of ID in Registry as well. now it seems the reinstallation helps - ID seems to work properly but i cant find any records in Registry again.
You guys who have ID under Windows 7 64bit, could you please check if you have some records in Windows registry in HKEY_LOCAL_MACHINE under SOFTWARE? I dont think its normal that there are none
thanks   

the only relevant or seemingly important key i've found is InDesign.Application and InDesign.Application.CS5. But I can't figure out why there is no InDesign key in HKEY_LOCAL_MACHINE under SOFTWARE, as EACH software i have installed has its key here. I had ID on my previous computer with WINDOWS 7 32bit, and in HKEY_LOCAL_MACHINE there were all respective keys of the applications from CS5 i had installed. maybe Windows 7 64bit version manages keys in a different way
today again when i opened ID it behaved strangely. no toolbars, no layout and when i clicked on the hidden toolbar only then it showed up and ID gave a message that programm stopped working and will be closed... and really - it was closed

Similar Messages

  • Problem installing itunes on windows 8 64bit. Installation gets stuck on Status: (blank) literally blank

    Problem installing itunes on windows 8 64bit. Installation gets stuck on Status: (blank) literally blank. I really need to install this since I have only 1 PC and i just bought the new iPhone 6.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • HI! I am using iTunes with Windows 7 64bit.after upgrading itunes  to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

    HI! I am using iTunes with Windows 7 64bit.after upgrading itunes  to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

    Refer this article to reset Winsock to it's default.  Your PCTools may have inserted LSP.
    http://support.apple.com/kb/TS4123?viewlocale=en_US
    After reset and restarting windows, you may get a prompt to remap LSP, click no.

  • Windows 7 64bit: After effects crashing!

    Hello, i just installed the after effects trial on my macbook pro late 2010 in windows 7 64bit but... after the splash screen and the window appears, its instantly crashes with "after effects has stopped working" i have downloaded after effects cs5.5 yesterday and installed it, opening it now it just crashes =/ anyone know how i can fix this?

    yes im using the latest bootcamp drivers given to me by apple, i have not yet found a way to update my sound card drivers past apples control =/ but nvidia sure is possible, i have not installed any third pary codecs on this machine and i have the required .net runtimes =/
    ah i would like to point one thing out....
    after installing my wacom intuous4 drivers, photoshop 64bit refuses to load anymore, so im forced to use 32bit which doesnt crash, could this be the same fro after effects? if so am i able to install 32bit after effects instead? i cannot resolve the drivers for  the tablet, without the drivers photoshop will load, with the drivers it wont

  • How do I get Fireworks CS3 to work in Windows 7? After installation my internet would not function.

    I installed
    Fireworks CS3 in the new Windows 7.  It seemed to function well.  After a reboot I noticed my internet would not work.  I attempted to resolve the matter but was unsuccessful.  Has anybody had this problem?  If so what is the fix.

    Is Windows 64bit or 32bit?
    I've heard that 64bit Win7 will not play well with Fireworks CS3. Try to run Fireworks CS3 in some WinXP Compatibility Mode in Win7 -- I think this mode is available in Win7 Pro and Ultimate...
    Hope this helps...
    Cheers!

  • Airport Utility won't open in Windows XP Pro after installation

    Hi
    I just bought Airport Express - AirTunes. I've installed enclosed software and updated with latest firmware by Apple Software Update. I've still problem to open Airport Utility. When I try to open the program I got a explorer failure.
    The failure signatur is:
    AppName: aputil.exe AppVer: 5.2.1.8 ModName: kernel32.dll
    ModVer: 5.1.2600.3119 Offset: 00012a5b
    I've tried to resolve the problem by looking for solutions on Apple.com, Microsoft.com and Google.com but still no solutions. Please help.

    Hi, I have the same problem and called the Apple support hotline. I gave them detailed descriptions of the problem. They told me my Windows installation was screwed and I should reinstall Windows. Makes you wonder why the support hotline isn't aware of the problem ...
    The recommended older version seems to work fine. Hope it will communicate with my airport express station ...

  • Launching a windows store app after installation using c#

    I am just curious if there is a way i can launch installed windows store applications within an application. I mean when i click an app, it launches if installed or downloads and launch from windows store Thank you...

    Hi Joseph,
              You cannot force an application to download and install from the Windows Store, by-design.  Only the user can allow an app to install.
    If you have an app already installed, you can use the
    file protocol or URI activation to launch apps which are designed to handle the specific resources, but you can't simply open another app without context.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Satellite U500 - Windows 7 64bit (after clean install, wireless issues...)

    Good night,
    I've just installed windows 7 Professional x64. Now I'm experiencing some wireless issues such as constant breaks on the wireless connection (every 5 minutes more or less). I've tried to install the lastest drivers for the wireless LAN adapter, without success.
    By the way, I have a Toshiba Satellite U500.
    Any help? :)

    It's a U500/00k? Model PSU9MA-00K013.
    I havent actualy managed to access windows at all. The install problem has come up "out of the box" so checking any settings is impossible.
    It just keeps looping back to the same error message. The only software I have is what came on the hard drive, and an XP istall disc that came with the package. According to the manual, if i use the XP disk it will wipe XP completely.
    So frustrated right now.

  • TS4445: iCloud: iCloud Control Panel 2.0 for Windows requires repair after installation on Windows Vista 64-bit

    I have just installed iCloud control panel 2.1, but this has not resolved the Outlook issue.
    HP Win7 Outlook 2010.
    Does Apple or any user have a suggestion?

    Do you have the latest service packs installed for Office.. ?

  • I'm trying to install iTunes in my Windows 7 64bits, the installer says it installed successfully (taking a really little time) and when I search for the program it isn't there. I tried with several versions of the program. What can I do?

    Help please!

    Help please, I'm thinking about buying and iPhone and I don't know what I'll do. It says there's no error but it doesn't install!

  • Windows 7, 32 bit freezes at startup after installation with bootcamp

    Hey.
    I really hope anyone can help. I have just recieved my new Macbook Pro and I would like to install windows 7 on it. Using the guide to Bootcamp everything went well and I got in to windows. But after installation of the needed drivers from the Leopard CD I needed to restart and now I cant do anything (it freezes after typing my password or sometimes even before) - I have to shut it down.
    Everything is fully updated (Mac OS X 10.6.3).
    I have tried to remove Windows again and installed it once again, this time i got into Windows, but I then had the same error after updating windows - even without using the Leopard update files.
    Anyone know what to do?

    have one more question for you...
    In another environment, where everything went fine, i see green diagnostic report.
    while starting admin server it gives me
    \Java\jre6\lib\ext\QTJava.zip was unexpected at this time.
    C:\Oracle\Middleware\user_projects\domains\EPMSystem>so still it is not installed completely!!
    -Sumant

  • MSI GX60 USB 3.0 Windows 7 64bit drivers

    Where can I get the USB 3.0 drivers?  I installed Windows 7 64bit after ripping out the included Windows 8.  Only my USB 2 port works but all 3 of the 3.0 ports don't recognize any devices plugged in.
    Thanks in advance.

    Quote from: a0th on 14-November-13, 08:10:40
    Please, i need some help there. Ive installed the Chipset drivers in this link
    msi.com/product/nb/GX60-Hitman-Edition.html#/?div=Driver&os=All
    but yet the USB 3.0 ports doesnt work. Where did u get your drivers?
    Please don't ressurrect old threads. Start your own, new thread please.
    Follow the forum rules.
    >>Please read and comply with the Forum Rules.<<

  • Qosmio F50 - Unkown devices after Windows 7 64bit installation

    I have just made Windows 7 64bit clean installation and there are unknow device (ACPI\TOS6205) , (ACPI\ENE0200) and MULTIMEDIA CONTROLLER.
    Somebody can help me?
    Thanks,

    Hello
    Vendor ID 102F is Toshiba America but PCI database doesnt show more informations
    To give you a more detailed answer it would be interesting to know which driver you have already installed.
    Generally speaking a friend of me that has Qosmio F50 used this installation order for Qosmio F50 and Windows 7:
    -Windows 7
    -Chipset driver
    -Storage Manager
    -Display driver
    -Sound driver
    -LAN driver
    -WLAN driver
    -Bluetooth driver
    -Infrared driver
    -Modem Utility
    -Card reader driver
    -Webcam driver
    -Toshiba Value Added Package
    -Toshiba Flash Cards Support Utility
    I hope it helps. :)

  • I have an old Mac G5 with OSX 10.5.8  After a crash of my HD, I reinstalled the CS3. At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under th

    I have an old Mac G5 with OSX 10.5.8
    After a crash of my HD, I reinstalled the CS3.
    At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under three choices to "send back" and "records in a second time "or" never record "and I continue to choose the latter option.
    Another problem is that in Bridge (version 2.0.0.975) I can no longer see thumbnails of RAW files from my Canon 40D that I saw before.
    Should I upgrade ACR? which is the latest version supported on my Mac?
    thank you

    Sergio Bellotto if you keep receiving the registration screen then please try accepting the screen in a different User account.

  • HT201436 I change my greeting every day. Each morning when I hit "Record" on the greeting window, I'm routed to Siri. The only way I can record a new greeting is through my Bluetooth ear piece. What's up?

    I change my greeting every day. Each morning when I hit "Record" on the greeting window, I'm routed to Siri. The only way I can record a new greeting is through my Bluetooth ear piece. This all started when I upgraded to OS 7. What's up?

    Start with http://www.pinkmutant.com/articles/Leopard/leospot.html and http://www.thexlab.com/faqs/stopspotlightindex.html, then my mod to Finder's Find at http://www.macosxhints.com/article.php?story=20080229204517495 for what you can change so you can find stuff excluded by the default structure.

Maybe you are looking for

  • New Smart Playlist / Genre = / Genre does not display in Info list

    I'd greatly appreciate help.. spent many hours looking for answer already. I have created several Smart Playlists in the past. They work fine. They are all classified by Genre. Now I have created a new Smart Playlist. It all looks fine with the Genre

  • Printing Any File to Adobe Opens it Twice

    When I print any kind of file to adobe (word, excel, email, web, etc), it will open twice in PDF. Essentially, I will print, say, a Word document to PDF, it opens in PDF, I close it, then immediately it opens again in PDF. It's rather annoying and I

  • Exporting data to csv files

    Please can you help an Oracle newcomer? Below is a script (which I took from the forums) that I used to run in Lite to export data to a csv file. As you can see I am having problems with running the same file in 8i - It starts off OK i.e. asking for

  • DW8 CSS Window display problem

    Paging the font of all knowledge! In my CSS display window I have lost the 'tree' display - it's now showing the individual properties per item in a grid box - how do I get the original tree display back?? TIA! Buzby "There's nothing more dangerous t

  • TFS2013 webclient not triggering WHENCHANGED rule on System.RelatedLinkCount

    Hello Team, We had upgraded our TFS from 2010 to 2013 update 4 version recent. we are facing a issue with "webclient not triggering WHENCHANGED rule on System.RelatedLinkCount", but it works fine with Visual Studio 2013 Update 4. Later on search on M