No relation in PLPO for alternate routing.....

Hi Experts,
I am using PLPO table in my program but i am not getting alternate routing ( there are two alternate sequences ) link between the two table PLPO and MAPL. In mapl it is showing Matnr, PLNNR and PLNAL for alternate routing.
In PLPO there is not link. Pl. help where i can get link with plpo table for alternate sequence ?
Yusuf
Message was edited by:
        YUSUF BHORI

Hi Debopriyo,
AFKO AND AFPO tables are order related. But in my case orders has not confirmed yet.
Yusuf

Similar Messages

  • Routing Error - Scheduled ECO for Alternate Routing

    Hi,
    I'm creating routing using API ( and manually too, get same result)
    Error Message Says:
    ALT-2 routing for item 13662020 is pending from change notice 1475023.You must either make all changes to it through change notices or implement 1475023 first.
    ALT-2 is the alternate I'm creating for item Routing 13662020 . I want to ask what is the link between ECO and Routing Alternate.
    The ECO 1475023 has Alternat ALT-2 in it.
    Thanks
    Manu

    The ECO 1475023 is trying to change the routing and you are trying to change it too.
    So Oracle asks you to either implement or cancel the ECO.
    The link is the change_notice field in the bom_operation_sequences table.
    If you open the routing screen, change the drop down at the top from current/future to all and also uncheck the implemented box.
    You will see the unimplemented changes.
    Hope this answers your question,
    Sandeep Gandhi

  • I have Windows 7, and I am being told that it does not support the newest Ai Illustrator, Are there any other alternate routes I can take to get adobe illustrator and photoshop on my computer? Perhaps an earlier version? Thanks! ~

    I have Windows 7, and I am being told that it does not support the newest Ai Illustrator, Are there any other alternate routes I can take to get adobe illustrator and photoshop on my computer? Perhaps an earlier version? Thanks! ~

    houseofrest,
    According to this page, you can use it for CC:
    Adobe Illustrator CC for Mac, Windows, PC - Tech specs
    Or you can buy CS6:
    http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-illustrator.html

  • Alternate BOM & Alternate Routing

    Hi All,
           What is Alternate BOM ?
           What is Alternate Routing ?
           How do I create Alternate BOM ? [Please give me a step by step procedure]
           How do I create Alternate Routing ? [Please give me a step by step procedure]
           What are all the configuration set-up is required to automatically and manually select the Alternative BOM while creating a Planned and Production Order ?
       What are all the configuration set-up is required to automatically and manually select the Alternative Routing while creating a Planned and Production Order ?
    Please provide me an understanding on above questions will be grateful.
    Thanks in Advance

    Dear Madhan Shah,
    If  you are new to the FORUM kinly read the rules first, so that in future you wil avoid posting mulitple questions in same thread.
    What is Alternate BOM ?
    If you have more than one BOM for same material then each BOM is created as alternate BOM
    EX - The BOM for producing sample will not be same as BULK so based on lot size you will have this.
    What is Alternate Routing ?
    If you have more than one ROUTING for same material then each ROUTING is created as alternate ROUTING
    EX - The ROUTING for producing samplING will not be same as BULK so based on lot size you will have this.
    How do I create Alternate BOM ? Please give me a step by step procedure
    First create a BOM in the CS01 and save it.
    Again create a BOM for the same material, the system will give you a message telling Alternate bom created.
    You can see the alternate bom number.
    How do I create Alternate Routing ? Please give me a step by step procedure
    First Create a Group and Group counter 1
    Add the second routing as Group counter 2
    You can define the Alternate routing / group counters based on the lot size or validity
    What are all the configuration set-up is required to automatically and manually select the Alternative BOM while creating a Planned and Production Order ?
    What are all the configuration set-up is required to automatically and manually select the Alternative Routing while creating a Planned and Production Order ?
    For above 2 questions
    NO configuration is requried
    Creat PRoduction version in C223
    Here you define in each production version which is the BOM and routing it has to use.
    Each production version you can define it with a lot size or valdiity period.
    IN the MRP4 against the selection method you can define how the production version has to be selected.
    Kindly let me know your feedback , if answered kindly close the thread.
    reg
    Dsk

  • Online Emulator for RV042 router

    Hello:
    I am looking for Online Emulator for RV042 router.
    If yes, please reply with a link.
    If no, please give me a similar one.
    Many thanks.

    Sang1224 wrote:
    Please keep me posted regarding the outcome. 
    I am never surprised by Verizon's marketing shenanigans, but everyone in my cul-de-sac is running a VZ WiFi router, so the signal is always bogged down. I just want to get this new router and see if it helps with my service. 
    I will try again today, if I can get someone on the phone.
    I'll keep you posted.  No contact from either here or {edited for privacy} Verizon Executive Relations Team, who emailed me yesterday.  I just checked my call log in  DV and my cell, and no missed calls.
    In my now daily check of offers, today was 75/75 for $10 and a new router.  I clicked it, and unlike your experience, it did offer it to me for only $10 more for 2 years.  As tempting as it was to do it for another free router I resisted, waiting to see how this is resolved.
    I will wait till later today to see if anyone reaches out before going further.

  • FBL5N for Alternate Reconciliation Accounts

    Hi all,
    I have created two reconciliation accounts for one single customer and posted entries using original recon account as well as alternate reconciliation account.
    But when I draw FBL5N, and in the dynamic selection criteria enter the alternate reconciliation account, and execute, I am getting the message that no item exists. But when I am not entering any account there or even when I enter the original Reconciliation Account, I am getting all the items in the report including entry for Alternate recon account.
    Could you please let me know how to draw reports for different reconciliation accounts?
    Thanks & Regards,
    Sajan C P

    Hi Sajan,
    Try this route:
    SAP Easy Access: AR>Info systems>Reports for AR Accountg>Customer Balance> S_ALR_87012172
    Here you can once use the recon acct under further selections, click on normal balance under output control,
    then again use alternate recon acct under further selections and click on Spcl GL balances under output control
    But you will see only balaances, not line items
    Try if this solves your problem
    Sanjay

  • Public-real IP changed for SAP Router

    Hello,
    The real IP for SAP Router system has changed, therefore I would need to re configure the same.
    I have gone through existing threads, but not throwing much light related to my query.
    I tried to reconfigure, but when generating the certificate I get below error. The /usr folder is the old folder of the router and am trying to reconfigure in folder is /newrouter. The OS is windows server 2008.
    D:\NewRouter\ntintel>sapgenpse get_pse -v -r certreq -p local.pse "CN=<hostname>,
    OU=0000872340, OU=SAProuter, O=SAP, C=D"
    Got absolute PSE path "D:/usr\local.pse".
    get_pse ERROR: PSE already exists "D:/usr\local.pse"
    I have already changed the environment variables for SECU_DIR and LIB one.
    My questions are :
    1) Is there any way to just update the ip address on the market place by just opening the ticket at XX-SER-NET OR do I need to perform the whole procedure after uninstalling previous configuration.
    2) What is the method for uninstallation of SAP Router?
    Thanks.
    Sat

    Hi,
    Thanks for your reply.
    Actually I changed the env variables and after restarting the sapgenpse command worked.
    But I did not proceed further.
    I have informed SAP to update the new ip address.
    My query is what action should I perform at my end instead of reconfiguring the router again.
    Thanks.
    Sat

  • DM-VPN with Static NAT for Spoke Router. Require Expert Help

    Dear All,
                This is my first time to write something .
                             i have configure DM-VPN, and it's working fine, now i want to configure static nat.
    some people will think why need static nat if it's working fine.
    let me tell you why i need. what is my plan.
    i have HUB with 3 spoke. some time i go out side of my office and not able to access my spoke computer by Terminal Services. because its by dynamic ip address.  so what i think i'll give one Static NAT on my HUB Router that if any one or Me Hit the Real/Public IP address of my HUB WAN Interface from any other Remote location so redirect this quiry to my Terminal Service computer which located in spoke network.
    will for that i try but fail. 
    will again the suggestion will come. why not to use .. Easy VPN. well sound great. but then i have to keep my notebook with me.
    i'll also do it but now i need that how to do Static NAT. like for normal Router i am doing which is not part of VPN.
    ip nat inside source static tcp 192.168.1.10 3389 interface Dialer1 3389
    but this time  this command is not working, because the ip address which i mention it's related HUB Network not Spoke
    spose spoke Network: 192.168.2.0/24
    and i want on HUB Router:
    ip nat inside source static tcp 192.168.2.10 3389 interface Dialer1 3389
    i am using Cisco -- 887 and 877 ADSL Router.
    but it's not working,   Need experts help. please write your comment's which are very important for me. waiting for your commant's
    fore more details please see the diagram.
    for Contact Me: [email protected]

    hi rvarelac  thank you for reply :
    i allready done that ,  i put a deny statements in nat access-list excluding the vpn traffic , but the problem still there !
    crypto isakmp policy 10
     encr aes
     authentication pre-share
    crypto isakmp key 12344321 address 1.1.1.1
    crypto ipsec transform-set Remote-Site esp-aes esp-sha-hmac
     mode tunnel
    crypto map s2s 100 ipsec-isakmp
     set peer 1.1.1.1
     set transform-set Remote-Site
     match address vpnacl
    interface GigabitEthernet0/0
     crypto map s2s
    Extended IP access list lantointernet
    30 deny icmp 172.17.0.0 0.0.1.255 192.168.1.0 0.0.0.255
    40 deny igmp 172.17.0.0 0.0.1.255 192.168.1.0 0.0.0.255
    50 deny ip 172.17.0.0 0.0.1.255 192.168.1.0 0.0.0.255
    80 permit ip any any

  • Advertise implicit-null label for static routes

    Hi, I want to ask if there is any way to change the label or stop adveritise label for an static route. Normally LDP advertises an Implicit Null label for directly connected routes. We want to do similar thing for static routes.
    We need to do this is because somehow we need to do rate-limit on the PE interface connecting to the core network instead of the interface connecting to CE. As the incoming packets still got labelled, the rate-limit is skipped. So we want to stop the PE creates label for the static routes or advertises them with implicit null label. Thanks in advance.

    Calvin,
    Bear in mind that if you only enter the "no mpls ldp advertise-label" command, LDP will stop propagating all labels, which might not ba what you want. If you selectively want to propagate certain labels, then you need to also use "mpls advertise label for " as Shivlu suggested.
    Regards,

  • TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

    Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

    Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
    By the way, it might help if you indicated where you are located.
    To complain to Apple use http://www.apple.com/feedback/ipad.html

  • It is asking for a router name and password???

    The sales person told me how easy this would be to set up..."just plug it in" he said...right.  Anyhoo - I disconnected my ancient wireless router and put the cd in - started doing its thing and then it asks for a router name and password...the only name and password I have is from my old ancient router...how could it be the same?  Where do I find this info?  Thank you for any help!

    Just go to the Linksys support site, find your router model and hardware version there, and download the User Guide or User Manual for your router, and there's all kinds of useful information there.  I'm surprised that there isn't a "Quick Start" guide in with the router that gives basic instructions like go to 192.168.1.1 and then how to login to set up your router.  But it is in the downloaded user manual for sure.

  • Function Module for Creation of classification data for a Routing

    Hi
    Can you please let me know if there are any function modules/Bapi's to create Classification data for a Routing?
    THanks
    Shekar

    For creating classification data, have a look at the function group CTMS and function module CTMS_DDB_SET_VALUE_INTERNAL.
    Not sure what you mean by "Routing".
    For BAPIs also look into the function group CLBPA, that sits in the same development package CLCL as the function group CTMS.
    Hope this helps.

  • Finding the shortest path router for the router tracking purpose

    Hi all,
    A Question asking you regarding to routers' tracking information.
    We keeps all the router infomation of our subnet in a file name "routers.txt" in this format:
    1 2 1
    2 4 1
    4 3 1
    1 3 5
    This states there are four routers, the distance between routers 1 and 2 is 1, between 2 and 4 is 1, etc.
    I need to write a Java program to keep track the shortest path between routers, I would understand that we can get this done easily in Java, but I am not a Java Savvy. I'm new in Java, would somebody help me to the right direction?
    In order to keep track the routers in our subnet easily,the output would look something like:
    Router 1
    To Router Distance Vector
    2 1 2
    3 3 2
    4 2 2
    Thanks very much,
    Cait.

    Hi kksenji,
    Well, because of the webform, it's not obvious to see. The output would be simple. From the input, for router 1 to router 2, the shortest distance is 1. For router 1 to router 3, the shortest distance is 3, for router 1 to router 4, the shortest distance is 2 and so on. The middle vector that it went through is 2 for every route. Hope this makes sense.
    Just try to solve the problem with the shortest distance, and I have a hard time to figure out the algorithm for this as well as how to get this started.
    Thanks, Cait.

  • END point URL for ESB Routing service says NOT FOUND

    Hi All,
    For the routing services in ESB, The link of WSDL is opening up fine, but the link of endpoint URI for the routing service is failing with the message below message. When i invoke the WSDL using SOAP UI, i get back the the same error message. I tried bouncing the server , but of no help. I also notice that slide directory ESB_Projects gives 404 error on any browser.
    So when i click below url for any of the routing service
    http://<hostname>:<port>/event/<systemName>/<serviceGroupName>/AddressStandardizeRS
    I get below error in browser-
    Not Found
    The requested URL /event/<System Name>/<Service Group Name>/<Routing Service Name> was not found on this server.
    Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at odevsoa.local1.wbcgp.com Port 7777

    Check if the port of ESB in your server is open.
    I think that the port is: 7777
    try from ESB server:
    wget WSDLURI
    if you got the file then the port is closed.

  • Lot size in BOM as well as for alternate material

    how can we define the Lot size and validity period for a BOM means we want to define that 1 to 100 qty are to be produced with alternate 1 and 101 to 1000 for alternate 2. How the same can be defined in the master BOM.
    There is one component in the BOM and there is a alternate material is also, Users want to define that while issuing the material , system allow to issue only say qty " 50" and then alternate material for next lot.
    Is there any possibility to define the BOM as per the above requirement.
    thanks
    harish

    Dear Harish,
    if u have alternative BOM's, then creat production versions
    1) creat BOM with two alternatives (say alt 1 1to 100 & alt 2 101 to 200)
    2) creat multiple Routings with two group counters
    3) creat production version in MM02 in MRP 4 view or work scheduling view
    4) in BOM slection in MRP 4 view maitain the prameter as 3 or 4
    Then MRP takes care of lot sizes difined in PV & BOM and creat procurment proposals
    Regards
    kumar
    Edited by: kumar kumar on Aug 3, 2009 8:02 AM

Maybe you are looking for