No release - Q-Infoset missing

Hi,
we have problem while making Production order with transaction CO07 (Without Material)
Error Message is No release - Q-Infoset missing - Supplier 94540
As this production order is without material I can not maintain Q-infoset.
Could you please solve problem.
Is it QM setting are linked order type in production order as for other order type I am not facing this error.If so please let me know where this linkage is there in cstomizing.
Thanks & Regards,
Lalit

Hi
See this link
Authorizations for creating an infoset
Assign points if useful
Thanks
N Ganesh

Similar Messages

After Creation of PO Release strategy is missing

Hi Experts,
We have a problem that we have created a PO but we found after that release strategy is getting missed out.
What could be the possible causes for this?
Note: We have checked in CL20N everything seems to be in place.
Cheers,Kumar.S///

Hi Jurgen,
Very sorry for the late reply as i was not in office.
I have checked the following char in CL20N transaction,
Plant,Purchasing group,order type,total net order value,Purchase organisation,Vendor account group.
This is FYI.
Please reply ASAP.
Cheers,Kumar.S///

ABAP Query - Sq03 0 infosets missing post upgrade to ECC 6.0

Hi ,
After upgrading from 4.6C to ECC 6.0 we found that few infosets from SQ03 & also from SQ01 is missing in the upgrade box ECC 6.0.
Can anyone help to troubleshooting it.
Thanks & Regards
Senthil

Hi,
In Upgrade, the some queries may not be generated...
hence you need to regenrate the queries...
Use the FM : RSAQ_GENERATE_PROGRAM
This FM needs input the Query name and the functional area...
The output will be the generated program....
To generate all queries, write a custom report using the above FM..
Reweard if useful
Regards
Shiva

11g Release 2 install missing packages

Hi,
I'm trying to install 11g Release 2 on a CentOS (4.9) box, but the pre-req check shows that I'm missing the following packages (I had 9 to begin):
gcc-3.4.6 (X86_64)
gcc-c++-3.4.6(X86_64)
libstdc++-devel-3.4.6
Tried to use the yum command "yum install gcc" but get the following error.
Error: cannot find a valid baseurl for repo:update
I think this is due to the "CentOS-Base.repo" file, which I've tried to update by changing the mirror URL's but no success.
Then tried to find the rpms online (http://rpm.pbone.net/) managed to find the majority of them but I can't seem to find the 3 listed above. The new versions such as gcc-3.4.6-8.x86_64.rpm don't work, so I need the exact match.
During the pre req I tried to select the "Ignore all" option and continue with the install but the installation fails with the following in /oraInventory/logs
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: rm -f ntcontab.*
+INFO: (if [ "compile" = "compile" ] ; then \+
+/oracle/product/11.2.0/dbhome_2/bin/gennttab > ntcontab.c ;\+
gcc -m64 -fPIC -c ntcontab.c ;\
rm -f /oracle/product/11.2.0/dbhome_2/lib/ntcontab.o ;\
mv ntcontab.o /oracle/product/11.2.0/dbhome_2/lib/ ;\
INFO: /usr/bin/ar rv /oracle/product/11.2.0/dbhome_2/lib/libn11.a /oracle/product/11.2.0/dbhome_2/lib/ntcontab.o ; fi)
INFO: /bin/sh: gcc: command not found
INFO: mv: cannot stat `ntcontab.o'
INFO: : No such file or directory
INFO: /usr/bin/ar: /oracle/product/11.2.0/dbhome_2/lib/ntcontab.o: No such file or directory
+INFO: make: *** [ntcontab.o] Error 1+
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'mkldflags ntcontab.o nnfgt.o' of makefile '/oracle/product/11.2.0/dbhome_2/network/lib/ins_net_client.mk'. See '/oraInventory/logs/installActions2012-08-06_04-50-51PM.log' for details.
Exception Severity: 1
Any help would me MUCH appreciated !

Hi,
why are you using CentOS?
Why not simply use Oracle Linux. It is very similar to CentOS, it is free and totally supported with Oracle database.
ISOs can be downloaded at edelivery.oracle.com/linux
And update server is public-yum.oracle.com
This way you don't have to fight against problems, where only few people can help...
Regards
Sebastian

Purchase requisition release strategy tab missing

Hi all
I configured purchase requisition release strategy and ME51N is working issuing no error but it is not displaying Release Strategy Tab , please help me where i am wrong.

hi,
check few reasons:
1. There might be more than 1 release strategy using the same class, due to which it is not possible for sap system to determine the unique rel. strategy..this normally happens when you copy the exsisting class and assign it to own new one...
2. check the release strategy OMGSCK, is there any problem with your release strategy...
3. Check whether you have maintained all the classified field in the document or not..
4. check whether the release is assigned to any workflow...if so, then check the inbox pls...
regards
Priyanka.P

Standard infosets missing in CRM

In owr CRM box. we are not getting the standard infosets while creating the data source.
How to get those infosets.
Any inputs will be help full.
Regards
Rajiv Sharma

Hi,
did you create them as data sources in transaction CRMD_MKTDS? Only the data sources that are created there appear in the list of assignable data sources for an attribute list.
hope that helps
--klaus

The release notes for FP/AIR 16 beta is missing

I'm glad to see the new beta, but the release notes are missing! The link (http://labsdownload.adobe.com/pub/labs/flashruntimes/shared/air16_flashplayer16_releasenot es.pdf) gives me a 404 error ;(
I hope to see the changes in the new version ASAP. Thanks in advance.

1+

Release Tab in purchase order disappear after release using ME29n

Hi there,
We are busy testing support stacks (upgrading from ECC6 SAP_APPL SAPKH60305 to SAPKH60307)and we've come accross a strange problem. When we create a normal purchase order (ME21n) the purchase order does pick up a release strategy. Using the older ME28 transaction to release this purchase order, everything is fine. We can use ME28 to release the purchase order, as well as unreleasing the purchase order, as often as we want (the same purchase order). When we use transaction ME29n the release tab in the purchase order just simply disappears after saving. In the purchase order header changes, the release change is visible, but the release tab is missing. This purchase order is now not subject for release, and a goods receipt is possible without release. I checked in table EKKO as well and the release fields in this table for this purchase order is empty.
Has anybody had a similar experience? Any advise would be greatly appreciated.
Regards
Christo Vermeulen

Hi Christo Vermeulen,
I have detected the same problem as reported by you. Did you solve it? Do you know how can I procedure to solve it?
Thanks in advanced,
Eder Nicoleti

Release strategy tab is not coming in SES

Hi All,
I am facing a issue where I have created an SES, and release strategy is assigned to this SES. Problem is somehow the user is not able to see the release tab when he go wants to release the SES. The release tab is missing from the SES.
Am sure somebody has faced this kind of issue and have any idea how to correct this.
Thanks

Hi,
The direct reason that there is no release icon available in ML81N
is inconsistency in the field ESSR-FRGRL for affected SES's.
This field should be filled with 'X' as all those SES are subject
for release.
Have you changed customizing for involved release strategy recently ?
If a relase strategy is created with a certain name and documents are
created with respect to it afterwards, this release strategy should be
changed then IF AND ONLY IF a NEW name is assigned to it as well. In
other words, if such a strategy is already use, it should be RENAMED
before applying the desired changes.
Otherwise you will run into the observed inconsistencies when trying to
edit documents which were created BEFORE the strategy was changed
(since the system at some point always checks the NAME of the strategy
to be changed, NOT the content).
So if this case happens only for already created SES a good solution
for it is to delete affected SES and create a new one with changed
release strategy.
I would delete affected SES and create it again.
It seems to be the fastest way to resolve this issue.
If you need a correction for this inconsistency issue, please open a SAP ticket for your problem.
Regards,
Edit

Missing Part list for Plant to Plant Purchase order

Hi,
      I need the following requirement in CO24,
      In CO24 its shows the missing parts for Sales order, similarly we want the missing parts list for Plant to Plant Purchase order in the same report. Also the report,
1.It should not consider the Planned order for a sales order.
2.It should not consider the planned order which can be convert into purchase requisition.
3.The procurement type should be "E" or "X".
Kindly guide me is there any standard layout changes in available or any development we have to do.
Thanks
Muthamil Murugan.G

Hi Purushothaman,
If you have the following settings in OPJK:
Plant                 XXXX
Order Type       XXXX
Availability Check    2
[X]Status Check
[X]Check material availability when saving order (may not need)
Checking Rule        PP PP checking rule
Component Check Type    ATP check
Release material     2 Release permitted despite missing parts
Then in COHV you try to mass release the order with the following parameter:
List: Order Header
Selection: Your selection criteria
Mass processing:
Function: Release
Max. No.of Processes 99
Save Log: Always
Release control order: Collective Order Release
Then after the order is released, you can find the missing part list of that order in CO03 menu path:
Goto->Missing Parts->Missing parts list
Hope it helps.
Regards,
Rachel

Problem in releasing po

hi
when i m using tcode me29n to relase purchase order
release tab is missing .
please help.
thanks
vijay

Hi,
Check your release strategy. If you do not have the authority to release the PO based on the release strategy (you may have authority to release PO based on other release strategy) then the release tab may be missing.
Regards,
Prashant

Releasing PO second time in ME28

Hi Experts,
The PO is approved in ME28 for the first time in the transaction code ME28. After approving the PO, changes are made later to the purchase order, which will again reassign the release strategy. This purchase order will again appear in the ME28 list for the approval, since this was already approved in ME28 and this purchase order is appearing for the second time in ME28 but without the release button (green tick mark and pencil icon). However this release button is available in T. code ME29N.
Why this release button is missing in T. code ME28 but it is available in T. code ME29N ? The approver would like to release the PO through the T. code ME28.
Many Thanks in advance.
Regards
LYD

Hi,
Thank you for your answer. The scope of List used in ME28 is ALV.
Actually the key user has created a variant in T. code ME28 with a filter criteria "deletion indicator" on the layout. It means all item lines deleted on PO will not be displayed in ME28 T. code. And it seems that the release button in ME28 T. code is always located on the First item line of the layout. Hence, if the user deletes the first item line of the PO, he will not see the release button (green tick mark and pencil icon) on the ME28 T. code because this button is always located on the first line of the layout.
How to display the button release on ALV list wich has the filter "deletion indicator" on the layout ?
Thanks.
regards,
LYD

Internet/e-mail with Missing Sync and WM5

Hi,
Can anybody tell me if I would be able to use the Missing Sync with a WM5 device (XDA Mini S) to connect to the internet and download e-mail.
I don't want to stump up for it if it does not.
Cheers

Complicated two-part answer:
Part 1: The current release of the Missing Sync for Windows Mobile does not support Windows Mobile 5 devices like your XDA Mini S, but an early release alpha package—available for use only by registered users of the current release version—does support such devices.
Part 2: Because your XDA Mini S is a Pocket PC device—as opposed to a smartphone—the final release version of the Missing Sync for Windows Mobile will support sending and receiving electronic mail, and surfing the web. This feature will not be supported on Windows Mobile-based smartphones.

Is it possible to release Process Order with Material Shortage

Hi All,
We are using PP-PI & still wants to have behavior of the PP prod order
i.e. Release Process Order with Material shortage.
Is it Possible.
Regards,
Jatin

Hi Jatin,
Go to Transaction OPJK. Select your Plant, order type and Business function as 2-Check availability during order release.
Under Material Availability tab, maintain '1- User decides on release if parts are missing' if user wants to decide for release of Process order or '2-Release permitted despite missing parts' if you want directly the Process order should be released despite of shortage in Release material field.
These settings are similar to PP.
Please check and revert.
Regards,
Hiren Ramani

Release rejected - Number Range not found.

Hi,
Iam creating a Rework Order RW01 order type.settings are almost same as PP01.
When I try to release the order it shows Release rejected and check log .
In the log I find below message thrown.
" You must enter the batch for material XYZ
*Message no. CO691"
However when I the enter the batch manually add try to release it again it shows Release rejected and check log .
In the log I find below message thrown.
" Number range not defined
Message no. 26023
Diagnosis
You have enter number range for the document type, but this number range is not defined for the number range object "document".
Procedure
Check in Customizing (Document management -> Control data -> Number ranges) which number ranges are defined.
If you want to enter a number range that has not been defined for the document type, contact your system manager. It may be necessary to create a new number range."
I have done the number range for order type RW01 in CO82 as well .
Is there anything I miss in Order Type configuration or Batch Management.
In PP01 order type my Batch updates when I release my order , Same setting is for RW01 as well.
Production Scheduling profile is also same for both.
Regards
Bhgl

Dear,
Please check the number range in CO82 or OPJH for your order type RW01.
Also check the component has determine the batch.
In the release control is set to user to decide (TCO11-FRBATCH = '1') or release despite of missing parts (TCO11-FRBATCH = '2') in Transaction OPJK
For all these components it is stored in the material master that a batch determination should be executed before or during the release (KZECH = '1' manually, KZECH = '3' automatically) and no batches have yet been assigned to these components before the order is saved.
Regards,
R.Brahmankar

No release - Q-Infoset missing

Similar Messages

Maybe you are looking for