NO RELEVANT PARTNER SYSTEM

Hi friends,
I have created a interface in sap PI purpose is to display warehouse stock
in POS system. But we have no inbound configurations for it. Now the problem is
when iam trying in SAP system T-code VK13 and i want to move the stock to FTP then this error
will displayed
NO RELEVANT PARTNER SYSTEM  XXXXXX(PORT)  EXISTS FOR OUTPUT CATEGARY COND_A
please help friends.
Thanks
Hari

HI Hari,
Could you provide more clarification on following points..
-     What is the exact problem?
-     Do you want to send data thru PI to FTP..am I right? So do you want to develop scenario IDOC to PI to FTP?
-     To do so you need to have partner profile and port configured for your PI system in your SAP R/3 system.
-     And need to develop the interface in PI which will convert the SAP message to FTP
Thanks,
Bhupesh

Similar Messages

  • Outbound Pricing Error VJ000-No relevant partner system EXISTS

    All
    I am trying to create an Outbound IDOC from Pricing master record VK12. I have maintained for existing working LS  DX010 partner system message type COND_A in the outbound and Inbound Parameter section via WE20.
    When I try to create/ send IDOC from VK12 it always gives me the message VJ000 "No relevant partner system DX1020 exists for output category COND_A". Can anyone tell me what steps am I missing to create the outbound IDOC.
    I will appreciate help in this. Thanks in advance
    Thanks
    SANA S

    Check this link
    [Creating Partner Profiles for Logical Systems |http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm]
    thanks
    G. Lakshmipathi

  • VERY VERY URGENT..!! AS2 connectivity to partner system.

    Hi all,
    I supposed to do EDI --> Idoc Scenario
    Im having partners A,B,C with three sender communication channels (for 3 interfaces)
    CC_AS1   for partner A ,
    CC_AS2   for partner B,
    CC_AS3   for partner C.
    all the messages (ediorders,ediinvoice .. etc) will be sending to the AS2 url
    HTTP://<your-xi-server>:50000/SeeburgerAS2/AS2Server
    from there the messages has to point to each communication channel (either to CC_AS1 or CC_AS2 or CC_AS3) depending on the
    Partner(A,B,C) -- which we will provide in party configuration  and
    message(orders,invoice.. etc).
    My question is
    1. How it will point to each communication channel?
    2. How it will transfer the correct message to correct CC.?
    3. What are the details we need to provide in AS2 sender  communication channel to differentiate each communication channel.?
    Need help urgently.
    Thank You.
    Note : Make sure that we are not using any WAN or Mail box .. to give mail subject line in Message subject.
    Regards
    Deepthi.

    Normally :
    The messages will flow from partner system thorough WAN to Mail box and we will put that mail subject (ex: orders_918902)to the Message subject of AS2 sender adapter.
    So it will pick the files according to the subject of mail box.
    Now to reduce the cost, they are completely replacing this WAN or mail box.
    The messages now will flow to AS2 server through internet.
    HTTP://<your-xi-server>:50000/SeeburgerAS2/AS2Server
    So all the messages from all the partners will be pointing to that url.
    Now my problem is how the messages will differentiate to which communication channel it has to go??
    EX: Orders will be coming from three partners(A,B,C)
    then how the AS2 adapter of party A will receive the correct msg which belongs to them.
    We need to differentiate that by giving some information in AS2 adpater.. either Message subject or someother information..
    I need that exact information.
    Regards
    Deepthi.

  • !!URGENT!!HELP REQD!! Transfer of idocs using ABAP port to partner system

    I am trying to transfer idocs using an ABAP port (with a FM assigned) from R/3 to Partner system( APO 4.0). The idocs are successfully posted in SAP R/3 sender sytem(ERP2004) and passed to ABAP port. I receive a success message " IDOCs transferred to Function module&" in BD87.However, the idocs are not being processed by the port into the receiving system. The idocs never reach receiving system.
    Is there a background process/event which needs to be run to trigger this ?
    This works fine in our QA but not in our Dev. system.

    Shankar,
    As per my understanding,
    <b>IDOCs transferred to Function module&</b> in BD87.
    This message your checking in receiving system.
    why dont you check the partner profile in receiving end.
    there might be the settings here choosed  for Background process.
    If yes, please check there might be background activity or program scheduled to process at a given time.
    As you have the QA system working fine. compare the settings.
    that will be the easiest way.
    <u>THIS is for my information </u>
    why are you using the ABAP port.
    Is there any unique funtionlaity given by this.
    if you have info., i would like to know.
    Regards
    Satheesh

  • How to send TR to partner system

    Dear all,
    i want to  send system-created TR for production order as a workload overview in partner system, how to achieve that?
    Thanks in advance.
    Victoria

    Maybe you can try to solve the communication between the systems via IDOC.
    There's a standard IDOC designed for TRs ("WMTRID01"):
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/52/16ad34543311d1891c0000e8322f96/frameset.htm
    SAP online help mentions this IDOC belongs to message type "WMREQ" and you should assign it (message type) to inbound partner profile. So, you need some development in order to be able to use it for outbound process.
    Edited by: Csaba Szommer on Oct 25, 2010 9:37 AM

  • What are the partner system(R/3) connected with APO

    Hi All,
    Can some buddy help me in checking what are the partner system(R/3) connected with APO.
    Let me explain my requirement in brief.
    I have Login in one APO system, but i donu2019t know the partner R/3 system available for it.
    So from where i can get this information ......?
    Regards

    Hi SCM APO 22,
    Try the below menupath in customisation
    spro > sap guide > apo > integration with sap components
            > Integration via APO Core Interface (CIF) >
                   > Basic Settings for Creating the System Landscape
                        > Set Up RFC Destination
    Please confirm
    Regards
    R. Senthil Mareeswaran.

  • ADRMAS is sent to two partner systems

    Hello,
    We created a custom made message type for DEBMAS: Z_DEBMAS. When we send a customer using transaction BD12 an ADRMAS message should be send to one partner system but it also sends an ADRMAS message to a total different system (where we send other DEBMAS, Z_DEBMAS_1 messages to). How is this possible?
    Regards, Jan

    In the distribution model of the other message type the dependant distribution was only set for address owner object id and not for contact person reference object id.

  • Buisness system can not find the relevant technical system in xi sld

    Hello,
    I set up r3 business system and technical system landscape in xi SLD, somehow the business system cannot find the relevant system landscape, does anybody have any suggestions what's possiblly goes wrong in my sld setting or how should I debug?
    Thanks,
    Meg

    Hey,
    Well  did you create the technical system  or was it created or used before>? Unless it was done you can't create  Business System for the specified technical system.
    Cheers,
    <b>*RAJ*
    *REWARD POINTS IF FOUND HLEPFULL*</b>

  • Roles not seen in SU01 of the Partner system

    Hi all,
    Please help me with this.
    Generally the ECC transfers HR data to other systems like the CRM, SRM and other systems. So all the roles assigned at the position level reach the corresponding systems.
    When I check the Position in the CRM I see the role assigned there. But in the CRM system, when I see the SU01 of the concerned holder, I don see the roles there.
    For the position level.the tcode is PO13 could you please tell me which table or feature should I check that defaults the data in SU01.
    Regards,
    RS.

    >
    RS wrote:
    > Hi all,
    >
    > Please help me with this.
    >
    > Generally the ECC transfers HR data to other systems like the CRM, SRM and other systems. So all the roles assigned at the position level reach the corresponding systems.
    >
    > When I check the Position in the CRM I see the role assigned there. But in the CRM system, when I see the SU01 of the concerned holder, I don see the roles there.
    >
    > For the position level.the tcode is PO13 could you please tell me which table or feature should I check that defaults the data in SU01.
    >
    > Regards,
    > RS.
    RS,
    In CRM run PFUD for the affected role.
    Edited by: John Navarro on Mar 11, 2009 11:58 PM

  • Condition record's not getting copied in local client copy !!!

    Hi ALL,
    I have a one question/doubt regarding local client copy.
    Our functional team creates condition type (for e.g.: thru FV11 for MM) in one client (golden), when I take client copy of that client with SAP_All profile, but condition type is not getting copied in the new client.
    I found for Sap notes, in one note it was suggested that change documents are not copied with any profiles.
    I found in FV11, there is one option, Send Condition, thru which we can send by Logical systems, but its giving error msg u201CNo relevant partner system DEVCLNT300 exists for output category COND_A
    Message no. VJ000u201D
    Can u pls suggest proper way to copy/transport condition record in new client created?
    Regards,
    C  Singh.

    Please refer below link
    http://help.sap.com/saphelp_dimp50/helpdata/EN/19/337d937f0311d2b467006094b9c9be/frameset.htm
    Regards,
    Pavan

  • Can we create new partner types for quallity notifications in SAP system?

    Can we create new partner types for quallity notifications in SAP system?
    The business requirement is to limit the available entries for partners  displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
    Would appreciate help in resolving this.
    Thanks,
    Nilesh

    I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
    Then you can assign the procedure to the notification type.
    This customisation setting does not solve the problem I have.
    I'm looking for the partner type creation process which we assign to the partner function.
    Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

  • Vi01 - Issue in conversion of partner function data in VTPA table

    Dear All,
    In VI01 tcode while creating shipment cost document, system gives error message as see log.
    "Item not created because service agent CR not in reference document".
    When debug, it is found that system is not converting data of table VTPA from PARVW (SP) to CR in following FM.
    SD_SCD_ITEM_INITIALIZE
    at line no. 55
    * determine relevant partner
      READ TABLE I_REFOBJ-VBPA INTO L_VBPA_WA
                               WITH KEY POSNR = I_TSNUM
                                        PARVW = I_TVFT-PARVW   BINARY SEARCH.
    please help if anyone has idea of this type of error.
    Thanks in advance,
    Rajesh Vasudeva

    In general I would focus on the message "Item not created because service agent CR not in reference document"
    Do you have any proof that a CR partner is in the reference document? screen shots from document or table?
    You probably know that a partner function key is a German abbreviation SP = Spediteur
    And in customizing you actually maintain that SP is e.g. CR for carrier in english
    Looking at your document you should then see a partner CR, looking into the table you would  see a SP  if the conversion exit is not active in your SE16, or you see a CR if the conversion is activated.
    So far the coding does not tell much.
    But the message says that a CR partner is missing.
    I would suggest you check your customizing to find the relation from the original key to your CR.
    then check the reference documents if you have a partner for this role.

  • Partner function SP determine in the sales order

    Dear SD Gurus,
    I want to determine the partner function SP in the sales order, when not entered anyvalue, the sales should give incopleteness check.
    But what the client here wants is that, sometimes the client wont enter any value on the sales order,so he will deleted the automatcally determined part function on the partner tab of the sales order header.
    Here the partner function should be not mandatory (because when the client wants to deleted the line ofn the header tab,system doesnt allow to do it). Also the partner function should not be not modifiable, because he may want to change it when sth wrong has been entered.
    So to automatically determined the partner function on the sales order,either modifiable or mandatory should be selected as I know.But when both are selected, this is not a good way for usage.
    Do you have any suggeston to make this partner functon automatically determine on the sales order and when wanted, deleted?
    Thanks
    Jack

    Hi,
    Try this way and see whether it's what is require by the customer.
    First of all what is this Partner function your talking about?
    Can you maintain this Partner function for each customer? If possible you can try this method.
    Go to below IMG path:
    Sales and Distribution / Basic Functions / Partner Determination / Set Up Partner Determination / Set Up Partner Determination for Customer Master
    Then highlight the "Partner Determination Procedure"
    Double click on "Partner Functions in Procedure" node
    If you haven't maintained your partner function there, add it
    Set it Mandatory if you want it to be set mandatory for each customer.
    Save
    Then go to below IMG path:
    Sales and Distribution / Basic Functions / Partner Determination / Set Up Partner Determination / Set Up Partner Determination for Sales Document Header
    Highlight the relevant Partner Determination Procedure for Order Header
    Double click on "Partner Functions in Procedure" node
    Add If you haven't maintained your partner function there, add it
    Don't Mark it as mandatory or not modifiable
    Save
    Now go to you customer master from XD02 transaction.
    System will ask you to add new partner function as it is Mandatory.
    Now create a Sales order from that customer.
    System will automatically copy that Partner function to you Order Header.
    If user wants to delete it, he can delete it from there.
    If user want to change it, he can change it from there.
    Hope this helps !
    Best regards,
    Anupa

  • IDOC error - same client same system

    Hi guru,
    i have a requiremnt to generate the IDOC for the same and same client. actually i have to get the data from application server and i have to generate the IDOC.
    for this i have created a Zreport and passed the data from application server to segment and i called the
    FM "MASTER_IDOC_DISTRIBUTE". after executing the Zreport, IDOC is generated and show the error
    status as 29.i.e. Receiver of IDoc is its own logical system.
    my logic is as follows.
    MOVE 'LS' TO w_edidc-rcvprt.
    MOVE 'SBECLNT130' TO w_edidc-rcvprn.
    MOVE 'ISU_MR_UPLOAD' TO w_edidc-mestyp.
    MOVE  'ISU_MR_UPLOAD01' TO w_edidc-idoctp.
    pls let me know the solution for this problem.
    Regards,
    Balu

    Hi,
    To send an IDoc from the SAP system to the external system, you must define outbound parameters for the message type and all relevant partners. This is valid even if your receiving system is same as sending systems.
    For more information, see Interfaces ® External Systems ® Configure Warehouse Management ® Communication R/3 -> External System ® Maintain Partner Profile in the Implementation Guide for Warehouse Management.
    If the system cannot find the partner (that is, the connected partner system) for sending the IDocs, proceed as follows:
    Define the missing partner profile.
    Resend all existing IDocs, which the system has not yet been able to send.
    What is the partner profile of your system ?
    Check your partner profiles in WE20 and maintain your message type in Outbound and Inbound parameter for the system.
    KR Jaideep,

  • Error in EDI Partner or partner profile partner no while notification close

    Hi All,
    When trying to close notification the system provides error message u201CError in EDI Partner or partner profile partner number".  The Relevant transaction code is QM02.
    EDI relevant partner profiles are maintained in table EDPVW which has entry for as u2018VNu2019 = Vendor. It doesnu2019t have any entry for customer.
    When I tried to debug the program the system looks for the entry for LI (under field partner type) for partner function number 51400 in the tables EDP13 & EDPP1. As it is not able to find this entry, it populates above error message. The entry for 51400 has been updated as KU (Customer). 
    But the same configuration is working fine for other notification number and its getting closed successfully.
    Please help me on this.
    Thanks in Advance,
    Regards,
    Ashish

    Ashish,
    Maybe only the vendor partner function has been maintained in the notification.Check the difference between this notifcation and other notification.Does they have all partner types assigned to them, are they of same notification type etc.
      Currently as idncated by the error message, the profile isnt able to identify the reciver for specific vendor and not customer.Since that config hasnt been maintained, it is resulting in error.
    Regards
    Narasimhan

Maybe you are looking for