No report available to follow investments in local currency in GR55

Hello,
Capex Follow-up in SAP available only in Euro:
1) Transaction IM52: Impossible to distribute budget to IO or WBS in local currency (only in Euro)
2) Transactions GR55 for capex follow-up are available only in Euro
There is No accurate report available to follow investments in local currency (example CNY) ?
Edited by: Tarek AYACHI on Jun 2, 2010 10:15 AM

in order to make prove your theory , check for this material in MC.9 how it is giving the output to be how much valuated stock and value.
MB51 should also show the same for that GL .Check the material moments happened for this to come into plant stock and how they came like either by a PO or by a initial entry or by a stock transfer.
Even though if the purchase is free it inctreases the stock qty and value ... but not the purchasing cost for invoicing.
If it is non valuated it will go to consumption.
stock will be valuated with the GR accounting docs for that GL.
if the MC.9 and MB51 THERE is a descrepancy then need to be corrected.
Regards,

Similar Messages

Including Second Local currency in Report Painter

Hi there,
My client is using parallel currency and their LC2 is USD. I am trying to create a Cost centre report using report painter and want to add LC2 amounts in this report.
Is it possible to add LC2 using report painter?
The following is some additional info:
CO Area currency = SGD
Op. Concern currency = SGD
Would appreciate if you could help me with this. Thanks in advance.
Regards
RG

Hi,
I think that it may not be possible. Hence the thread has not attracted much. The controlling reports are available either in Controlling area currency and object currency which is a company currency.Then there is no question of getting report in Local currency 2. You can try in ABAP report by having a selection of L2 currency and its translation ratio.
Trust this helps much in getting right solution!
Cheers!

Report to export class to a local file.

Hi,
Is there any report program which exports the class from ABAP systems
to a local file. There was one report program but it was exporting only the methods of the class and it was not exporting the implemeted methods of an interface in that class.
Any help would be greatly awarded.
Thanks,
Rashmi.

Hi,
i think it not available the following are the reports available in sap
REKH0004 SAP demo program that shows how to do 2D, 3D, and 4D graphics.
RGUGBR00 Substitution/Validation utility
RHGEN00 Regen PD and PA inconsistencies
RHGRENZ0 Delimit IT1000 and related 1001s. Program will delete any 1001 infotypes whose start date is after the delimit date.
RHGRENZ1 Extend the end date on delimited records. Very useful when you delimit a bunch of records incorrectly, and need to change the end date.
RHGRENZ2 Delimit IT1001 only.
RKCTSEAR Search source code for up to two strings. Also see RSRSCAN1 and RPR_ABAP_SOURCE_SCAN.
RPDTRA00 List all HR transactions.
RPR_ABAP_SOURCE_SCAN Search ABAP code for a string. Has many more options for selecting the ABAPs to search than RSRSCAN1 or RKCTSEAR.
RPUAUD00 HR Report to list all logged changes for an employee. Uses the PCL4 Audit Cluster.
RPUAUDDL HR Report to delete audit data from the PCL4 Audit Cluster.
RPUDELPN Delete all info for an employee number, including cluster data and infotypes
RPUP1D00/10 View/Delete data from PCL1 Cluster
RPUP2D00/10 View/Delete data from PCL2 Cluster
RPUP3D00/10 View/Delete data from PCL3 Cluster
RPUP4D00/10 View/Delete data from PCL4 Cluster
RSABAPIV Mass print/display of ABAP/4 help text
RSAVGL00 Table adjustment across clients
RSBDCBTC Submit a BDC job with an internal batch number and wait for the end of the batch input session.
RSBDCDRU Prints the contents of a Batch Input session. No options for error transactions only.
RSBDCOS0 Execute UNIX commands. Looks similar to the old SAPMSOS0 program that disappeared in 3.0
RSBDCSUB Release batch input sessions automatically
RSBTCDEL Clean the old background job records
RSSDOCTB R/3 Table Manual - prints a list of all fields in the selected tables with the field name and the field documentation.
RSCLTCOP Copy tables across clients
RSDBCREO Clean batch input session log
RSINCL00 Extended program list
RSNASTED Process message control output for entries in the NAST table
RSORAREL Get the Oracle Release
RSPARAM Display all instance parameters
RSPO0041 Removing old spooling objects
RSRSCAN1 Search source code for a given string. Will also search includes. Also see RKCTSEAR and RPR_ABAP_SOURCE_SCAN.
RSSNAPDL Clean the old ABAP error dumps
RSTBSERV Compare a contents of a table between clients
RSTXFCON Converts SAPScript page formats
RSTXSCRP Save a SAPScript layout set to disk, and load it back into SAP.
RSTXSCRP Transport SAPscript files across systems
RSTXSCRP Upload and download SAPScript layout sets
RSTXTPDF4 Pass the spool number of a report's output to this program to have the output converted to PDF format.
RSTXTRAN Add standard texts to a transport so they can be moved between systems.
RSUSR003 Check the passwords of users SAP* and DDIC in all clients
RSUSR006 List users last login
RSWBO052 Change development class of a sapscript (provided by Alan Cecchini)
RSWBO060 put objects into a request and transport it to any other system
********please reward points if the information is helpful to you***********

Financial Analytics Reports in Local Currency

Advise needed to help in configuring BI Apps such that the Financial Analytics reports (GL, Payables, Profitability & Receivables) show the transaction values in local currency i.e. INR instead of the default global currency USD.
I have changed the source parameter values in the DAC Container Setup while loading the data from an EBS R12 instance. The following source parameters values have been changed to INR from USD -
$$GLOBAL1_CURR_CODE (for the document currency)
$$GLOBAL2_CURR_CODE (for the local currency)
$$GLOBAL3_CURR_CODE (for the global currency)
However, the Finacial Analytics Reports do not show any transactional values for the selected Ledger (having INR as the global currency). The data is populated in the Local Closing Amount, Local Opening Amount etc columns of the Fact - GL Balance but no data is populated in the Closing Amount (Global), Opening Amount(Global) etc columns.
Please advise to resolve the above mentioned localization issue in Financial Analytics.
Regards

Are you looking for Changing the Default currency in OBIA Dashboards

Hello friends, my itunes has stopped working. and the problem report stated the following: Fault Module Name:     KERNELBASE.dll   Fault Module Version:     6.1.7601.17514.................. please can anybody help me?hello friends, my itunes has stopped w

Hello everybody> my itunes has stopped working and the problem report stated the following:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    iTunes.exe
Application Version:    10.5.3.3
Application Timestamp:    4f14cc3d
Fault Module Name:    KERNELBASE.dll
Fault Module Version:    6.1.7601.17514
Fault Module Timestamp:    4ce7b8f0
Exception Code:    80000003
Exception Offset:    0003381b
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
can anybody help me?

Are you seeing a similar message when launching QuickTime Player?
What security software is installed on the computer? Have you tried testing in an admin account or after uninstalling tthe security software?
Use one of the following articles to guide you through removing iTunes and the related QuickTime files.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Reports available for Project

What are the seeded reports available for Reporting.Consolidation Purpose in Projects.
I need following details --
1. Report for Monthly expenses for the Projects
2. Report for Project status like whether they are closed , Approved etc and the cost associated with these Projects along with Supplier Invoice info ,Associated Purchase Order etc .
3. Reports related to reconciliation
Any report which match some of the requirement will also serve my purpose .
Please help

Hi,
Below are some of the reports that may help in your requirement.
1. Report for Monthly expenses for the Projects:
You can look at the reports MGT: Expenditures Summary and MGT: Expenditures Detail
2. Report for Project status like whether they are closed , Approved etc and the cost associated with these Projects along with Supplier Invoice info ,Associated Purchase Order etc .
For the Supplier invoice info and PO : use the same MGT: Expenditures Detail report with the Expenditure Class as Supplier invoice
For Project Status: AUD: Project Configuration
3. Reports related to reconciliation
AUD: Cost Audit Report
AUD: Project Subledger Summary
AUD: Project Subledger: Detail by Expenditure Type
AUD: Project Subledger: Detail by Project
AUD: Revenue Audit Report
AUD: Supplier Invoice Audit Report
Hope this helps!
Thanks,
Sathish Raju
www.projectsaccounting.com

Report showing GL Accounts with document posted in currency other than local currency

We need a report that shows all the GL Accounts that had a document posted in currency other than local currency during the month. The purpose of such a report is that we should not miss any Foreign Currency Gain or Loss at the end of the month.
Is there such a report already in Standard SAP ? Please let me know. Points guaranteed.

Hi Ajay sir,
It's never be a bad idea. But I think Rajeev might be looking for a stright report than work around, which is not available.
Regards...
Jose

Report available for test cases (manual test script files uploaded)?

We upload our test script files to the "Test Case" tab, assign it a status. We are hoping to have a report that would report all test case files and their STATUSES.
In solar_eval, there is a standard SAP report for test case provided. However, the field "Status" for the test case file is not included in this report.
Is there any report available that would give us this status? If not, in which table does this data come from? Is there anyway to build a simple SQVI query to extract the list of test cases and their statuses?
Any help is highly appreciated!

Hi Jo,
It's not entirely clear on whether you are look for 'Status' values of the Test Case document itself OR for 'Status' values of the Test(s) conducted on such Test Case documents.
I believe the following two SOLAR_EVAL reports should resolve either ways:
(a) SOLAR_EVAL -> Project -> Configuration -> Assignments -> Documentation (Programme called is SAPLSPROJECT_SOLAR_DOC_EVAL_IM) , Tick only 'Test Cases' and switch off other tabs
(b) SOLAR_EVAL -> Project -> Test -> Test Plan Status Analysis
Best regards,
Srini

Diplay Functional,Reporting and Local currency

Hi,
I've a requirement to display Transactions in functional,Reporting as well as in Local currency.Do I need to setup Oracle 11i Env in MRC for that?If so how to get the transactions displayed in Local cuirrency ?Do I need to Covert them or I've to create new set of books for the same like we create one for reporting currency?
This requirement is for 11.5.10.2 as well as R12
Thanks,
Mahender
Edited by: user518071 on Jul 30, 2010 6:20 AM

Hi
You need to do the following
In 11i
1. You need to set up Reporting Set of Books to get the transactions and reports in Reporting currency for Local Currency, Functional Currency.
2. If your Functional Currency is USD, Reporting Currency is EUR and Local Currency is AED, then you need to set Main SOB in USD and Reporting SOB in EUR and AED.
In R12
1. You can set Reporting currency if you need the transactions and reports in Reporting currency provided Chart of Accounts, Calendar and Convention is same.
If your Functional Currency is USD, Reporting Currency is EUR and Local Currency is AED, then you need to set Main SOB in USD and Reporting SOB in EUR and AED.
2. If the requirement is not only currency but you need for a different Calendar or COA or Accounting convention, then you need to set a Secondary Ledger
Hope this helps
Regards
Sivakumar

Local Currency COP, KRW values wrong in report

I have the following problem. Any values in local currency COP (Columbian Pesos) or KRW (Korean Won) comes in a report 100 times in value. For example if the value in the infocube is 1950 COP, in the report it shows as 195,000 COP. This happens only for currencies COP, KRW. For all other currencies the value in the cube and report are same. This is happening in AR cube, AP cube, Inventory cube.
How to correct and is there any setting to be done for this.
Please note that i am not using any currency conversion. I am just reporting in local currency .
Ram

Hi Ram,
It should be a bug.
The situation is the following.
For example, you load amount in COP (KRW) = 12345. Since default number of decimal places for amounts with currency is 2, the system keeps amount loaded as 12345,00 (with 2 decimals).
There is a special table TCURX which lists currencies with number of decimals not equal to 2 (you can also access or set values in this table through SPRO -> SAP Netweaver -> General settings -> Currencies -> Set decimal places for currencies).
I beleive you can find KRW & COP in the mentioned above table with number of decimals not set (zero).
During query result generation the system apply the real number of decimals from TCURX table and 12345,00 is treated as amount without decimals (coma simply ignored). That gives 1234500 amount. The same amount in TND (with 3 decimals) becomes 1234,500 etc.
There are plenty of OSS notes about this bug, for example, # 760195. Not sure which one to implement. Youd better contact SAP Support.
As a workaround I can suggest either delete KWR & COP from TCURX table or use amounts without currency or as number (with a separate 0CURRENCY field going into the cube).
Best regards,
Eugene

How to make OBIEE reports available during the DB tables data refresh?

Experts,
We have our production ETL run for 2.5 days every month. OBIEE reports will not be available during the run. We have a requirement to make the reports available all 24 hrs 365 days. So, what we are trying is to copy all the fact/Dim tables to the new schema running in the same or different DB server and amend the connection pool to point this schema during the run. Here are my questions. Is this a workabale solution (or) is there better approach for meeting our requirement
Regards,
Sarvan

I would suggest this option:
Store the following connection pool values in a table and call them in your connection pool using Connection Pool Scripts
Data Source Name
User ID
Pwd
when ever you want to change db just you need to edit these values that would help your bi with no downtime.
You might have to tweak it little bit if needed.
More or less we have use sometime back to a client where they want to switch dbs dev to test to etc
Try it out.
BTW: 2.5 days load time for Full load or Incr?
Edited by: Srini VEERAVALLI on Feb 1, 2013 8:40 AM

Please any one explain me the Different pay scales available for following

hi ,
Please any one explain me the Different pay scales available for following
streams.
sql,pl/sql developer-------------1 year
sql,pl/sql developer--------------2 years
forms ,Reports developer--------1 year
forms ,Reports developer--------2 years
jdeveloper--------------1 year
jdeveloper--------------2 years
oracle apps technical consultant(any module)----------1 year
oracle apps technical consultant(any module)---------2 years
oracle functional consultant(any module)-------------1,2 years
oracle workflow consultant------------------------1-2 years
Regards,
zakeer

You can probably earn even more if you Oracle ACE Member.

What r the reports available under 0sd_c02 and0sd_c01

what r the reports available under 0sd_c02 and0sd_c01

Hi Satish,
Please refer to the "queries" subsection in the left panel of this following link. It contains list of queries from 0SD_c01 to 0SD_c05 cubes. You can see the corresponding cube when you select the query.
http://help.sap.com/saphelp_nw70/helpdata/en/da/1669372b2b7d20e10000009b38f842/frameset.htm
Assign points if helpful.
Regards, Uday

I haven't get any receipt of purchases since mid January 2014. How can I contact and let the itune fix this? (I live in Thailand, not available to call or find local support.)

I haven't get any receipt of purchases since mid January 2014. How can I contact and let the itune fix this? (I live in Thailand, not available to call or find local support.)

Has the ISP modems and routers been power cycled then tested again?
Possible ISP connection issues or LinksysSmartWiFi.com service outage maybe...
Are FW versions on all routers up to date?
To safely update FW, I recommend doing the following: Download the FW file from the support site first.
Disable the auto update feature on the router. <If this was on, possible someting was updated recently. I recommend leaving this OFF.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.

(Request for reporting available) is not coming in Cube

Hi All,
I have Cube & DSO.
I added fields in DSO & Cube.
Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
thanks in advance,
Kiran.

Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani....

No report available to follow investments in local currency in GR55

Similar Messages

Maybe you are looking for