No Reporting Symbol for the cube.

Hi all,
no reporting symbol for an cube.
I created Z cube without any aggregates and loaded data sucessfuly QM status is green but i'm not able to see the reporting symbol next the request id. When i checked in manage content data, data is available for the fact but not for any dimension table.
Please go through the following when we did the diagnosis.
Diagnosis
    There is an inconsistency between the load status of the data and the
    option of reporting on this data.
    There is data in the InfoProvider that is OK from a quality point of
    view, but is not yet displayed in reporting.
    The problem, for example, is to do with request 0000003343, number
    REQU_44ROL5YBBCJMDL5HQ8TVBAER6.
Procedure
    Choose Refresh to remove the inconsistency.
As per the procedure we did but went to short dump
UNCAUGHT_EXCEPTION
CX_SDB_ORA_PROGRAM_ERROR
Highly appreciable if any one could resolve our issues.
Thanks in Advance.

Hi Niyati,
What is your BW version. If it is BI 7.0 then check these OSS Notes:
975948 No update statistics for newly created tables
998904 Statistics check shows red or yellow traffic lights
If it BW 3.X version then run the RSRV check for the cube.
Bye
Dinesh

Similar Messages

Basis for creating the dimension for the cube

Dear All,
I have one basic query.
We can build the ODS and pull data from source system to BW system. But now if i am suppose to build the Cube for my reporting then how do i make decision to build dimension for the cube?
I mean what are the parameters which we need to consider before we build the dimension for the cube and what type of objects will be there in each dimension??
Appreciate your help on this.
Regards,
Anup.

Hi,
There is as no thmb rule for it. Generally we try to balance the dimension when we create them. For example, It is not advisable to include Material and Vendor in a single dimension.(otherwise it will lead to dimension explosion...large no. of records in a single dimension.)
The idea of dimension tables is to group associated characteristics to reduce the number of fields in the fact table and to reduce redundancies in storing frequent combinations of
characteristics values in a table. Examples of characteristics typically grouped into one dimension include Customer, Customer Group, and Zip Code grouped into a Customer
dimension, and Material, Material Group, Color grouped into a Material dimension.
A special case of a dimension is the line-item dimension, which is used for characteristics with a very high cardinality. Atypical example is the document number in a lineitem-
level InfoCube.
Regards,
Gunjan.

Using the tcode:S_ALR_87013611, no report data for the cost center

Hi,Friends.I need a help.
In the tcode FB60,i entered the following data and then posted the vendor inovice sucessfully.
data:
( Note: G/L acct:55020141 is also a primary cost element)
In the tcode:S_ALR_87013611,I entered the following data and executed.
but the result is:{Report contains no data. Check the selection log}.
data: { Controlling Area: C999, Fiscal Year: 2010, From Period:1, To Period:12,Plan Version:0,
        Or value(s):2001}
(Note: Cost center:2001 belongs to Controlling Area: C999)
please tell me how to do,so that using the tcode:S_ALR_87013611, I can see the report data for
the cost center 2001.
sincerely                      WenYao Ma
Edited by: wenyao ma on Mar 22, 2010 1:09 PM

thank you,friends.
I just solved it.
Solution:
1) Maintain Controlling Area
   path:spro>Controlling>Organization>Maintian Controlling Area>Maintain Controlling Area.   tcode:OKKP
In the {Activate components/control indicators}cost center should be 'component active'
2) Maintain Number Ranges for Controlling Documents
   path:spro>Controlling>Organization-->Maintain Number Ranges for Controlling Documents.   tcode:KANK
Element { COIN CO Through-postings from FI} should be assigned to one group.

After the most recent update 9.0.1 all the website symbols for the site in my bookmarks have dissapeared... how do I get them back?

when looking for a website in bookmarks using OS 10.6.8 on Mac Book Pro all the symbols for the website have been deleted and requires much more time locating the bookmark. What can be done to restore or reactivate the symbol?

https://support.mozilla.org/en-US/questions/910682
thank you

[svn] 1384: Splitting DefineFont into the various DefineFont 1, 2, 3, etc SWF tag formats but retaining a common base DefineFont class so that embedded fonts are still retained as symbols for the SWF dictionary no matter what version of the SWF tag is us

Revision: 1384
Author: [email protected]
Date: 2008-04-24 07:54:58 -0700 (Thu, 24 Apr 2008)
Log Message:
Splitting DefineFont into the various DefineFont 1, 2, 3, etc SWF tag formats but retaining a common base DefineFont class so that embedded fonts are still retained as symbols for the SWF dictionary no matter what version of the SWF tag is used.
Also improving [Embed] so that it can recognize .TTC files as assets (previously these were only recognized through CSS @font-face rules).
QE: Yes, please add a test case for using [Embed] to embed fonts from a TTC file in addition to our tests for @font-face. Note that the AFEFontManager must be configured for this scenario.
Doc: No
Checkintests: Pass
Mxunit: AtEmbed Font suite: Pass
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/media/AbstractTranscoder.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/media/FontTranscoder.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/MimeMappings.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/CachedFontManager.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/Dictionary.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/MovieEncoder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagDecoder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagEncoder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagHandler.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagValues.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/builder/tags/FontBuilder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFontAlignZones.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFontInfo.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.java
Added Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/DefineFont3Face.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont1.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont2.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont3.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont4.java
Removed Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/DefineFontFace.java

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

Report definition for the report not specified

Hello
I have written the code attached but getting the error "report definition for the report not specified"
string v_report_name = Charts.ReportPermutation.ToString() + Charts.charttype + ".rdlc";
string v_report_server = "http://MANOJ-PC/reportserver";
string v_report_path = @"D:/Anshutech New/AnshutechPlusProjectCosting/AnshuProjMgmtSystem/AnshuProjMgmtSystem/";
this.reportViewer1.LocalReport.ReportEmbeddedResource = "AnshuDataSet." + v_report_name;
this.reportViewer1.ServerReport.ReportServerUrl = new System.Uri(v_report_server);
this.reportViewer1.ServerReport.ReportPath = v_report_path + v_report_name;
this.reportViewer1.ProcessingMode = Microsoft.Reporting.WinForms.ProcessingMode.Local;
this.reportViewer1.RefreshReport();
Please help
regards
Manoj Gokhale

Hi kalpesh ,
According to your description, you want to display a report which hasn’t been deployed to report server in ASP.NET MVC app, right?
If so, you can add a ReportViewer control in ASP.NET MVC and utilize ADO.NET to provide the data to display the report. For more information, please refer to this article:
ASP.NET MVC - Handling SSRS reports with ReportViewer – Part I.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

How to create new text symbols for the standard program.

Based on the customer's requirement, I need to create a new implicit enhancement for the selection screen.
I want to create new text symbols for the parameters and blocks, but I cannot change the standard ones.
Does anybody know something about that? Thank you.

hi ming yu,
example : %_MATNR_%_APP_%-TEXT -> this is the material description name in mb5b
change the description in ur enhancement implementation
%_MATNR_%_APP_%-TEXT = 'Material'
it is works only input/output field
Thanks&Regards,
naveen

Installing crystal reports 9 for the first time

Hi,
I am trying to install Crystal Reports 9 for the first time. We just received a package with 4 envelopes including Crystal Reports 9 Advanced, Standard, Professional, and Developer. Each envelope also includes Crystal Enterprise Report Appliation Server which I don't think I need (or I'm not sure). I have read a little bit on how I can go online to the SAP Service Marketplace and request license keys. I have not requested a permanent license key yet. I believe that I can install Crystal with a temporary key and then input the permanent key later. What I have done is insert the installation CD for Crystal Reports 9 Developer and then input the product key code found on the back of the Crystal Enterprise Report Application Server CD cover that was packaged with the Crystal Reports 9 Developer CD. However I get a message saying that the product key code is not valid or has expired. There is no product key code on the cover for the Crystal Reports 9 Developer CD but there is one on the Crystal Enterprise Report Application Server CD cover so that is why I input it.
Why is this key code expired? Please note that I am installing on a test PC before I install on the PC of the user who will be using Crystal for work purposes. Therefore I wanted to just install with a temporary key if there is such a thing at this time.
thanks
JW

Hi Josh,
I would like to add few things with above suggestion
For a new key code :
Request key codes for new orders via SAP Marketplace (SMP), will receive a download letter on new purchases providing them with their SMP login credentials. Using these credentials you can login and click in the "Keys & Requests" tab > Request a License key .
If your existing Key code does not work :
You need create a customer message [https://websmp107.sap-ag.de/message] using component XX-SER-LIKEY-BOJ .
Hope this helps,
Regards,
Shweta

How to Create Interactive report lists for the gross sales, credit ....

How to Create Interactive report lists for the gross sales, credit returns, and gross weight for the customer for the current year and comparing the same with that of the previous year for the same period.....
plz tell me steps to accomplish this....plz ...give me the detail description..plz......many many thnx in advance...

Hi raja,
Display a checkbox , customer number on the basic list and also set a GUI STATUS on the basic list.....
Select the customer by checking the checkbox and click on the button you create in the GUI status....
Write the desired code to be displayed in
AT USER-COMMAND even checking the sy-ucomm....
so this would make you to into interactive list...
Hope this would help you.
Regards
Narin Nandivada

How can I change the counter symbols for the slideshow templates in Muse?

How can I change the counter symbols for the slideshow templates in Muse? Currently they are obviously normal text characters. So, how can I change them to filled circles, for example?

Hi Aish,
Thank you very much. This was very helpful. I am still new to Muse and try to find my way through all the features and possibilities. I like it very much so far.
Does Muse support ‘liquid” design as well?
Thank you !
Best regards,
Fred

Bought Garageband for iPad1 and it worked like a dream. Then I upgraded my system to 4.3 and now Garageband doesn't work. How come? When I try to start it just flickers and then goes back to show the symbol for the app.

Bought Garageband for iPad1 and it worked like a dream. Then I upgraded my system to 4.3.5 and now Garageband doesn't work. How come? When I try to start it just flickers and then goes back to show the symbol for the app.

I understood what you were saying. You did type 4.3.5 in your post. Several other things to try.
Close all open apps like I described above. Just tap the home button first so that you will be able to access all of your apps. Close every single one and then restart again.
You can also delete the app and download it again. As long as you use the same Apple ID and password there is no charge to download it again. Tap and hold down on the GarageBand app icon until it wiggles. Then tap the X to delete it. Download it again.
Reset the iPad. Hold down on the sleep and home buttons at the same time until the Apple logo appears on the screen. It takes about 10-15 seconds. Ignore the red slider shut off bar. When the Apple logo appears you can let go of the buttons and the iPad will reboot.
The final thing to try is to download another app - any free app. Sometimes that seems to reset something on the iPad. You can always delete the free app if you don't want it.

Reporting tools for the Business user - Crystal reports or BEx tools ?

Hi,
We have recently implemented BI/BO infrastructure. Scope of the inital implementation was an executive dashboard based off COPA data. We have used Xelcisus for dashboard and BEx tools for query design etc.
We would like to set up some of our key business users (analysts in respective functions) to be able to write their own queries off this COPA cube. The discussion point is whether to roll out Crystal reports for business users or have them trained on BEx tools i.e BEx query designer/analyzer.
Any inputs to my question "Crystal Reports or BEx tools for the Business users - pros and cons", is appreciated.
Thanks,
Girish

Our user currently do not have anything. It's fresh implementation. We would like to get the business users involved. The question is - what's the best start for a business user - Crystal Reports or Bex ?

Complex navigation & use of intermediate reports,NOT for the feint-hearted!

Hi all,
I'm trying to setup qutie complex navigation...
I have a report that provides metrics based on the organizational structure, which in the dashboard is presented to the penultimate level, and permits a drill down to the lowest level (centre). At the rpd level, the metrics (sales metrics) are defined at the centre level to which the organization structure dimension is linked. We have a metric defined which flags whether the centre at which the sale is made is the same as the centre to which the employee is assigned/usually works at (this has all been loaded by the ETL). We then have a count distinct metric (Num of Employees) on the sales reps ids for those records in the fact table that have this previous flag marked. All of this works as expected.
The dashboard displays this last metric described (Num of Employees) against the organizational structure. Again, OK. But we need to navigate after clicking on this metric, to another report, which displays all sales assigned to those employees (regardless of centre at which they were made), i.e. if the metric shows "6", then after clicking on this value, the "final" report to which we navigate must show all sales for those 6 employees. Naturally the table in the dashboard where the user clicks does not display the employee data, as it displays results at the centre level, so some kind of "intermediate" report which obtains those 6 employee IDs is necessary (this is how it would be done fore example in SQL). We have done this creating a report with employee IDs, a calculated field which compares the two centre values (as in the flag defined in the RPD), and finally contains the 4 organizational structure fields which need to obtain the values from the first report on the dashboard (ive assigned filters to these, which point to the correponding columns in the dashboard report). So, in theory this report would list the employee IDs we are counting in the "Num of Employee" metric. The "final" report then only needs to filter the values in the Employee Id column based on the employee IDs listed in the "intermediate" report.
The error im getting is: "State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 7455, message: ORA-07455 ..." the oracle error message given is that the query exceeds the time limit allowed by the database as the query is estimated in hundreds of hours. The main reason I think this may be ocurring is because the intermediate report is accepting as filter ALL values in the columns ive indicated, where as what is actually need is that it take only the value of the organizational structure columns that correspond to the metric the user has clicked on. I.e. the filter instead of reading only the specific organizational values, is reading all the values in the table, and hence the query is not permitted.
Has anyone achieved anything similar???
Edited by: zjac on Sep 20, 2008 12:42 PM

by using Direct database request your bypassing all the wanderful metadata you built in the BMM layer, as such much functionality is not available.
If you really need to use such complex SQL, I would suggest creating an inline view in the phyiscal layer and at least model this through your BMM either as a flat data source (ie include the dimension columns and model the same inline view into your BMM star)
If you do that, the BI Server will know what other logical columns this data source can relate you and you should find the navigation works as expected.
If you dont fancy that good practice, have a look at creating GOURL formulas as the column fx's, format as HTML to present the data as a hyperlink and manually pass all the parameters to the 2nd report.
I'd do the first option, its more inline with intended use.
What cant you do using the 'normal modelling / answers techniqes with union (see combined request in answers) and complex sql (evaluate function in RPD)??

Preview and print a Crystal report prompted for the sa password

Dear All,
Our customer has Crystal report add-on to be installed. When we Preview and print a Crystal report, we got a window prompted for the sa password. Even we type in a correct password, it still says wrong password...
Every time when I open my report in Crystal Basic 2008 on the server, then go database expert >> My connections >> click + in front of the connection name, it asks my sa password. I type in my password then save and close. Next time when I open the report and go my connections, I have to type in my password again. This only happens on one customer.
Any idea? Thanks a lot.
Regards,
Yuka

Hi Yuka,
1) All their SAP client workstation, they have to have use SQL2008 CD and install SQL Client on it
Correct, MS does NOT support MDAC or WDAC when connecting to SQL 2008.
2) Then go ODBC >> SQL Native Client 10.0 >> Create a new connection to SAP server. Should we use sa user or another use that has the same authorization as sa?
Correct again if they are also using ODBC to connect, as for using the sa account or creating a new one is up to you. I suggest creating a Crystal account with what ever rights your app needs, this way if tracing it turned on etc. you can confirm who is actually running the report.
3) Then from MY Crystal report, I have to use ODBC connection as well?
Just to clarify, if you created your reprots using OLE DB then they can do so also. But you need to update your connection properties. Open each report click on Database, Set Location, scroll down to OLE DB and expand and then choose MS SQL Server Native 10 as your OLE DB provider, fill in all the logon info and then verify the database. Do the same for each subreport also.
Save your report and either send them the new one or if you are doing this remotely then replace the original report.
VERIFY your reports to confirm they still return correct data and do work as expected.
Or if you are using ODBC then yes you do select the MS 10 driver with a new DSN. Then do the above to update the reports to all use ODBC as their data sources.
Hope this is all clear now....
Thanks again
Don

Where is the Manage Object function in Crystal Reports 2013 for the CMC?

I recently upgraded to Crystal Reports 2013 after upgrading our Crystal Reports server to SAP Business Objects Platform 4.1. Before the upgrade, I could publish reports from Crystal Reports XI to the CMC then right-click on the report title in the Repository Explorer (in Crystal Reports) and I had the option to select Manage Object where I could set the default settings for the CMC. I am not seeing this option in the new version of Crystal Reports. Is there something I need to do to see this option or has this option been removed from Crystal Reports 2013?

Hi Kelley,
You're right, the option doesn't exist in CR XI R2 and above.
All the options now need to be set in CMC.
-Abhilash

No Reporting Symbol for the cube.

Similar Messages

Maybe you are looking for