No requisition found; verify your entries in SRM 7.0
HI Udo,
i am using SRM 700 on level 005. I want to use a RFx-Szenario, for that i create a Purchase Requisition in ECC via ME51N, then i release it via ME54N. After that it will be send via ERPSourcingReuest Webservice, over XI to the SRM System. In the SRM System the XML Message is processed and has the status "Transfer to external status" with a green bolt icon. I don't see an error Message in tcode /SAPPO/PPO2 So this looks fine to me?
So I go into the SRM Portal Website, Purchasing --> Sourcing --> Carry Out Sourcing... there i enter my Purchase Requisition Number, which i have in the ECC into the Field "External Requirement", then i press "Search" and get the Warning Message
"No requisition found; verify your entries". No Purchase Requisitions are displayed - it is also nothing disblayed when i enter * or leaving everything blank.
What am i doing wrong, what is missing? Where can i see maybe further errors, if there is no message in /SAPPO/PPO2? In which tables should the data be written out of the XML Message?
Thank you in Advance for your help
Best Regards
Udo
Hi all,
the problem was that the relation between plant and product was somehow mixed up. We created it new and now we can process the mesasges.
But i have one more questions, which Monitoring Transactions i have for SRM (Abap/Portal)? When I was in Debug Mode i saw error Messages like:
A /SAPSRM/CH_SOA_MSG 84 Purchasing group for follow-on document missing
A BBP_PD 245 Purchasing group for follow-on document missing
A BBP_PD 246 Purchasing organization for follow-on document missing
A BBP_PD 249 Document type for determined backend system missing
E BBP_PC 13 No default value is defined
E BBP_PC 22 No tax data maintained
E BBP_PD 276 Back-end data could not be read
E BBP_PD 358 Select a location that is assigned to the plant chosen
E BBP_TAX 1 Tax code could not be determined
E BBP_TAX 13 Not possible to calculate tax
But i only saw that in the monitoring? These Errors can happy every time and i need to see them.... can you please tell me, where i can have a look?
Similar Messages
-
No Requisition Found in Assign sources of Supply, under central function
Steps followed:
1) PR is created in ECC prod 1000000262
2) Through SRM after selecting the PR we selected Collective Processing
and then transfered to sourcing cockpit. We got the green message
transfered to sourcing.
3) We tried to access the same PR in Assign Source of supply in central
function. But we could not access the the PR. The message is "No
requisition found; verify your entries ".
Any clue or solution to this Issue. ??
Thanks in advance
SKHi Manjunath,
In BBP_PD SC is created
In SXMB_MONI in SRM, ECC and PI/XI system everything looks ok
I am a SRM Tech Consultant Did not understand from NOTE 1263876.
When I go for "Assign Sources of Supply" under Central function
I do not get any result...I get message
"No requisition found; verify your entries "
Thanks
SK -
Unable to connect to imap.aol.com please verify your server name entry.
When I try to get or send mail with AOL on my Palm Treo 700p I get this VersaMail error:
Unable to connect to imap.aol.com please verify your server name entry.
All I have done today is have COX cable install a new modem for my desktop.
Any ideas why I can't send or receive e-mails?
Post relates to: Treo 700p (Sprint)When you setup AOL did you setup as POP3 or IMAP4? Have you done a soft reset since this error came up? Was this a new setup or existing?
-
Verify Your Payment message when i log into my account....
Hi, I found out my iTunes account was hacked last year as a hacker using a trojan horse backdoor program remotely controlled my computer. Long story short...i got a better anti-virus program scanned my computer and quarantined it. However, up until this day, everytime i log into my account, the person keeps playing around with it. They have tried to download music and succeeded. They are trying to buy music on my account but can't and now everytime i log into my account i get the message (Verify your payment). I clikc okay and it sends me to my account information pop up that says right next to my name and address (You must verify your payment before you can make purchases). This doesn't happen all the time and that i how i know someone is fooling around with it. Apple support told me how it will ak you that from time to time just so you keep your information up to date (that will only pop up if you are planning on buying something). Are any of you going through the same problem? And the songs on my album that i bought at the store are all in the wrong order. Is that happening to you to? It was never like that until the last iTunes update.
<Edited By Host>why would a host be editing my post? Is someone from the Apple company doing this? Why would you have to edit my post? Whta right do you have logging into my account to make changes to anything i make?
-
"iTunes was unable to verify your device" after succesfully completing recovery mode on iPhone 4
I have an iPhone 4 which has never caused me any problems, until i updated to iOS7 it started lagging and battery didn't even last until midday (having it charged 100% in the morning!).
In just a few days it turned off automatically and wouldn't turn on. I googled and solved it by pushing the two buttons together for about 10 seconds. iPhone revived, and all the data was intact though many people states it would've been erased.
The morning after, using my iPhone more carefully not to have it crash again, it crashed. 10 seconds wouldn't do and I gave up, until the day after I found by surprise that the battery had run out and it finally showed some sign of not being completely dead!
I connected the cable to iTunes and pushed the Home button before connecting the iPhone and it entered Recovery mode. Recovery mode was completed and the iPhone had to restart to complete the process. While completing I get the error message "iTunes was unable to verify your device, please disconnect and reconnect your device". And from here I don't get anywhere, so I will probably visit Apple Store and ask what can be done, but if anyone has had the same problem please share any possible solution to this problem!I had to contact Apple Store and make an appointment. They tried the last step suggested (which I had already tried three times) and stated that the memory had failed. They said it probably failed due to having some small issue already on the phone and then updating to a new iOS.
They could only offer me an exact copy of my iPhone but new for 149€. -
Apple Sync Notifies,exe.Entry point not found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have uninstalled Itunes 10.4 shut down and installed Itunes 10.4 and still get this message on opening? How do i fix this problem?With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belleThis is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him. -
Here's my problem, until yesterday my firefox browser is fine, unless sometimes when i playing games/app in facebook the plugin keep crashing but thats okay i can stop it and reload my firefox.
But now everytime i try to open firefox it displaying the error massage:
firefox.exe - entry point not found
The Procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library Kernel32.dll
I try to uninstall firefox, and reinstall again.
i have to use internet explorer and torch browser, which don't fit me and make me in pain.
i try to run in firefox safe mode, according to some suggestion here, but it wouldn't allow me to open Safe Mode (i even holding the Shift button when clicking on firefix icon)
Can you guys help me in here?
Iam using windows xp.
Thank you so much in advance, GBU all :)hi, do you have service pack 3 installed on your xp computer?
-
when i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
The AirPlay device "Apple TV" cannot be found on your network.
"The AirPlay device “Apple TV” cannot be found on your network. Please verify your network settings and AirPlay configuration or select another device."
I have been struggling to play radio from my iTunes to my Apple TV for more than 1-2 minutes at a time over the last two hours. I've updated both the Apple TV and iTunes to the latest software. I've also 'restarted' Apple TV from the General menu. I've unplugged and replugged the Apple TV several times, and I've also rebooted my MBP several times. Sometimes, after resetting Apple TV, I'm able to play radio from my iTunes, but then it stops working a few minutes later. I'm able to play the radio on my iTunes, but when I try to connect to Apple TV, I get the above error message again, even though the signal strength of the wifi is at full strength, according to Apple TV Settings.
I have a MBP 10.6.8 and a 3rd generation Apple TV. I am feeling very frustrated. What should I do? I feel like I've done everything?By the way, I've reboot the Apple TV, had music play for 1 minute, and then Apple TV stop working on me at least one dozen times today.
I've also had to Force Quit iTunes (which appears unresponsive) after Apple TV stops playing the music being sent from iTunes.
I get the above error message whenever I don't reboot Apple TV...but then when I do reboot it, it stops working 2 minutes later....
F%&$* THIS!! This is making me never want to invest in Apple products again. -
Getting the massage when starting up PC - Apple Sync Notifier.exe - Entry Point Not Found - The procedure entry point sqlite_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. How do I eliminate this message?
I'd first try uninstalling and reinstalling your MobileMe control panel, dc. Does that clear the message up?
-
I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
itunes was not installed correctly. error 7 (windows error 127) --
I have already tried (4 times) completely unstalling and reinstalling as was suggested But didn't fix the problem.
HELP---CAN ANYONE SUGGEST SOMETHING ELSE TO TRY??HELP!! I'm trying to reinstall my iTunes BUT keep getting this---iTunes.exe-entry point not found-the procedure entry point AVCPlayerSuppliesMediaSe;ectopmCriteriaAutomaticallKey Could not be located in the dynamic link library AVFFoundationCF.dll.
That one can be produced if you have an older version of Apple Application Support on the PC than is required by iTunes version 11.1.4.62. (The required version of Apple Application Support is included in the standard iTunes installers, but for some reason it hasn't been updating properly for some folks.)
Let's try updating your Apple Application Support to version 3.0 by doing a standalone Apple Application Support install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, can you launch iTunes without the error now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
"Contribute cannot verify your connection information"
Please can somebody help a non-techie from England (New Forest) who has hit a brick wall when using Contribute 3?
I have a community (voluntary and not-for-profit) website as a sub-domain on my business website. Don't ask me how I managed it, but I created the community website entirely on the Contribute software. For unknown reasons, it would not allow me to edit and upload pages etc., even though I have been doing this for some time. I uninstalled the program, re-installed it and starting again tried to make a connection.
I got the error message "contribute cannot verify your connection information. The path given does not match the provided website's homepage; or there may be a permission problem. Please contact your administrator for assistance".
Well, obviously I can't administer the site yet because I cannot get a connection! I have asked my web-hosting company to verify the information I need and he tells me that he is able to get into the site with no problem using the same information - he is using contribute CS4.
This is killing me with frustration because I so need to get some vital information out to our 34k residents which is time-critical (by 3rd Dec latest). I have put so much work into this without moaning, but am now at the end of my patience and feel like throwing the towel in. The site is onevoice.officeoverload.com if you would like to see what I mean.
Thanks for reading this - apologies that it is long. If anyone out there can help I would be so very grateful to hear from you
Best wishes
SueSue,
Maybe I can help you as I just solved my own connection problem after trying to get help from Adobe online support, phone support, and this forum for over a month.
You will need to have access to your Contribute Server installation. If you are using a MS Windows based pc and it was installed using the defaults it should be located here: C:\Program Files\Macromedia\Contribute Publishing Server. Under the CPS folder there will be a number of folders but you only need to open the database folder. Inside that folder will be a folder(s) with it's name being a number [1,2,3 - depending on the number of sites that you connect to]
Inside each of the site folders there will be a groups folder and user folder and a file named connection_key.stc.
I moved all of my site folders to another folder I created off the root folder [C:/contribute database backup].
That has the same effect as deleting the folders, but gives you the option to restore them if you need too.
Then I open the Contribute Client and it allowed me access and I deleted the existing folders and drafts.
Then I went to the site that I wanted to connect to and recreated the connection using the prompts. I had to recreate all of the users and assign their roles for the each site.
I did have a problem recreating one of my sites because it gave me the message that there were "drafts that needed to be deleted or exported", but it wouldn't let me do either of those things. I did a seach of my computer for the word "draft" and it found two files buried in some hidden file. I deleted those files and then I was able to recreate that web site connection.
I think the connection_key.stc file is the important file that needs to be removed as it contains an encrypted string of data.
In fact I also copied the connection_key.stc from one site folder to another and then I was able to get into the site, delete its connection (it was connecting to the wrong site of course) and then recreate the connection.
I hope this helps.
Jim -
getting AppleSyncNotifier.exe-Entry Point not found The procedure entry point xmlTextReaderName Could not be located in the dynamic link library libxml2.dll.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Restart the programme, it should not display that message, it should be clear.
Good Luck
Maybe you are looking for
-
I have limited storage laptop, I want to delete music from hard-disk
I have a limited storage laptop, I want to delete music from hard-disk and just leave it on my 60Gb ipod, BUT I dont want to have to log in as a guest every time. Any suggestions
-
I created a spreadsheet in Numbers recently that required the use of shapes (squares) in specific swatches of colour...but when I go to the print, the squares aren't staying in the spot I originally drew them in - instead they're moving down a couple
-
Help! Video plays fine in organizer, shows up red in sceneline
Hi there -- I'm new to premiere elements 8 and I'm trying to include a video clip in a sceneline. It's an .MP4 file from a digital still camera that also shoots video (a sony cybershot). When I look at the video clip in elements organizer, it shows u
-
Xmonad fresh install: xmessage says 'Error in xmonad.hs .....'
Hi all I've installed xmonad with pacman: pacman -S xmonad xnomad-contrib dmenu dzen2 and then i executed it via my .xinitrc #!/bin/sh # ~/.xinitrc #exec openbox-session numlockx & exec xmonad But it keeps spitting out error messages when starting X
-
I am making a book and only have 23 pages done. I keep hitting the plus sign to add pages and no knew pages appear. Help