No Resource Group created

Hi,
all I have an Azure Test account and I wanted to set up a SharePoint Testfarm.
Nearly everything works fine, but the field, where I have to type in a resource Group NEVER turns green. No matter what I put there.
Any Ideas? Did I miss something upfront?
Thanks for your help!
Cheers Matthias

Hi,
Thanks for Posting.
Since the portal is still in preview, we might not be able to provide an immediate solution to the issue.
However you can try the following steps and let us know if it works.
Try using a different browser and check
Clear cookies and temporary files in Browser and check again.
Have you tried creating a new Resource Group after some time, and did it work.
You can try creating a Sharepoint farm using Powershell using the following links
http://azure.microsoft.com/blog/2013/05/24/automating-sharepoint-deployments-in-windows-azure-using-powershell/
http://www.c-sharpcorner.com/UploadFile/ManasMoharana/configuring-sharepoint-2013-farm-on-windows-azure-vm-using-p/
If you want to give feedback to Development team regarding the Preview Portal, you can do so at the following site.
http://feedback.azure.com/forums/223579-azure-preview-portal
Regards,
Nithin.Rathnakar

Similar Messages

Error while creating resource group using non-globalzones.

Dear all,
Hi techs please guide me how to create failover resource group in nongloablzones.
I'm getting error while creating resource group using non-globalzones.
My setup:
I have two node cluster running sun cluster 3.2 configured and running properly.
node1: sun5
nide2: sun8
I have create non-globalzone "zone1" in node:sun5
I have create non-globalzone "zone2" in node:sun8
node:sun5# clrg create -n sun5:zone1,sun8:zone2 zonerg
*(C160082) WARNING: one or more zones in the node list have never been fully booted in the cluster mode,verify that correct zone name was entered.*
kindly guide me how to create Apache resource group using non-glabalzones, i'm new to sun cluster 3.2. please guide me step by step information.
Thanks in advance,
veera
Edited by: veeraa on Dec 19, 2008 1:54 AM

Hi Veera,
Actually you are getting a warning message where one of two things could have happened. Either you specified an incorrect zone name or one of the zones has not been fully booted. It's likely that you haven't booted the zones, so please follow this:
zoneadm list -iv
If zone1 or zone2 are not running then boot and configure them
zoneadm -z <zone> boot
zlogin -C <zone>
After that you can continue to follow the step by step instructions at
http://docs.sun.com/app/docs/doc/819-2975/chddadaa?a=view
These may also help
http://blogs.sun.com/Jacky/entry/a_simple_expample_about_how
http://blogs.sun.com/SC/en_US/entry/sun_cluster_and_solaris_zones
Regards
Neil

How do you create a new resource group from the new portal?

There's no option for new resource group when you click the "+" button. Am I missing something?

Hi mticb,
As far as I know, we couldn't create an empty resource group in azure preview portal, please vote this similar feedback at:
http://feedback.azure.com/forums/223579-azure-preview-portal/suggestions/6182477-create-resource-groups, sorry for any inconvenience.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Create VNet in resource group using PowerShell

I need to create a VNet within a Resource Group. The old portal lets me create a VNet but places it in a "Default-Networking" resource group which is not what we want (we have a naming convention to follow for programming etc). The
new portal lets me create a Resource Group but not a VNet. I am not a dev, I am a sysadmin so I do not use Visual Studio (which Resource Manager seems to be made for). I have tried using PowerShell (in ARM mode) by first making a Resource Group, and
then running a PowerShell command in an attempts to create a VNet and add it to the Resource Group:
New-AzureResource -ApiVersion 2014-06-01 -Location "Australia Southeast" -Name devausevnet -ResourceGroupName devausevnet -ResourceType Microsoft.ClassicNetwork/virtualNetworks
I got an error: "New-AzureResource : InvalidAuthorizationAppId: The appId <blah> is not allowed to make requests via API for 'PUT' operations..."
I tried doing this by making the resource group at the same time as calling the creation of a vnet via a template as well, but after prompting me for the values for the vnet, that got the exact same error.
I have found a page that suggests ARM is not yet able to create a VNet via PowerShell.
https://social.msdn.microsoft.com/Forums/office/en-US/f40b24dc-8c82-411e-871a-be3710743ec1/unable-to-create-azure-virtual-machine-using-resource-group-template?forum=WAVirtualMachinesforWindows
OK, so how am I supposed to create a VNet in a Resource Group that has a name other than "Default-Networking" please?
While I love the direction Azure is heading, I am becoming very frustrated with the number of things like this that seem to be partially functional in the old portal, the new portal, PowerShell etc. If
there is no cohesive means of doing this as yet, is someone able to provide a work-around? Note that it is not yet even possible to rename a Resource Group otherwise I would have simply done that.
Any help appreciated! Cheers. =)

Hi,
Based on my experience, there is no resource type for virtual networks in Azure PowerShell. In addition, to define a virtual network, you need to configure the address space as the property. The article below may be helpful to you:
Azure Resource Manager– Creating a Resource Group and a VNET
Furthermore, you can create a virtual network in a new resource group or a new one in
Azure Preview portal:
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Creating Resource Group based On Location

Hi,
Can we create Resource group location wise in PWA or Professional.
Thanks,
Prashant

What about creating a lookup table with the location and a resource enterprise custom fields? Then for each resource you can pickup a location. You could even then open all the resources in MS Project Pro and bulk update the location.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Can not start messaging server resource group in cluster 3.2

Hi all,
Please help in the following issue.
I am not able to start resource group (msg-rg) and following is the error:
ms1@root# clrg online -M -e msg-rg
clrg: (C748634) Resource group msg-rg failed to start on chosen node and might fail over to other node(s)
clrg: (C135343) No primary node could be found for resource group msg-rg; it remains offline
scstat output (remove some for brief description)
-- Device Group Servers --
Device Group Primary Secondary
Device group servers: SJMS ms1 ms2
-- Device Group Status --
Device Group Status
Device group status: SJMS Online
-- Resource Groups and Resources --
Group Name Resources
Resources: msg-rg mail msg-hasp-rs msg-rs
-- Resources --
Resource Name Node Name State Status Message
Resource: mail ms1 Offline Offline - LogicalHostname offline.
Resource: mail ms2 Offline Offline - LogicalHostname offline.
Resource: msg-hasp-rs ms1 Offline Offline
Resource: msg-hasp-rs ms2 Offline Offline
Resource: msg-rs ms1 Offline Offline - Stop Succeeded
Resource: msg-rs ms2 Offline Offline - Stop Succeeded
Following is the from /var/adm/messages (remove some for brief description)
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <ims_svc_start> for resource <msg-rs>, resou
rce group <msg-rg>, node <ms1>, timeout <300> seconds
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource msg-rs status on node ms1 change to R_FM_UNKNOWN
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource msg-rs status msg on node ms1 change to <Starting>
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/r
gm/rt/hafoip/hafoip_monitor_start>:tag=<msg-rg.mail.7>: Calling security_clnt_connect(..., host=<ms1>, sec_type {0:WEAK, 1:ST
RONG, 2:DES} =<1>, ...)
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 268902 daemon.notice] 45 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/sun/comms/msg
scha/bin/imssvc_start>:tag=<msg-rg.msg-rs.0>: Calling security_clnt_connect(..., host=<ms1>, sec_type {0:WEAK, 1:STRONG, 2:
DES} =<1>, ...)
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_start> completed successfully for reso
urce <mail>, resource group <msg-rg>, node <ms1>, time used: 0% of timeout <300 seconds>
Sep 26 12:25:19 ms1 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource mail state on node ms1 change to R_ONLINE
Sep 26 12:26:53 ms1 Cluster.PMF.pmfd: [ID 887656 daemon.notice] Process: tag="msg-rg,msg-rs,1.svc", cmd="/bin/sh -c /opt/sun/
comms/messaging64/bin/start-msg watcher", Failed to stay up.
Sep 26 12:26:55 ms1 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource msg-rs status on node ms1 change to R_FM_ONLINE
Sep 26 12:26:55 ms1 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource msg-rs status msg on node ms1 change to <Start succe
eded.>
Sep 26 12:26:55 ms1 Cluster.PMF.pmfd: [ID 819736 daemon.notice] PMF is restarting process that died: tag=msg-rg,msg-rs,1.svc,
cmd_path=/bin/sh -c /opt/sun/comms/messaging64/bin/start-msg watcher, max_retries=0, num_retries=0
Sep 26 12:27:25 ms1 SC[SUNW.ims:7.0,msg-rg,msg-rs,ims_svc_start]: [ID 141062 daemon.error] Failed to connect to host 192.168.
0.250 and port 27442: Connection refused.
Sep 26 12:29:55 ms1 last message repeated 6 times
Sep 26 12:30:26 ms1 Cluster.RGM.rgmd: [ID 764140 daemon.error] Method <ims_svc_start> on resource <msg-rs>, resource group <m
sg-rg>, node <ms1>: Timeout.
Sep 26 12:30:26 ms1 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource msg-rs state on node ms1 change to R_START_FAILED
Sep 26 12:30:26 ms1 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group msg-rg state on node ms1 change to RG_PENDING_
OFF_START_FAILED
Sep 26 12:30:26 ms1 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource msg-rs status on node ms1 change to R_FM_FAULTED
Sep 26 12:30:26 ms1 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource msg-rs state on node ms1 change to R_STOPPING
S

I got the mistake in adding /etc/hosts. I pasted the area here for any person who can notice if they encountered same problem or same mistake.
it should be following format:
192.168.0.250 mail.test.com mail msg-lcreate logical hostname as follow:
clrslh create -g msg-rg msg-lNotice qfe0:1
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
eri0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.0.240 netmask ffffff00 broadcast 192.168.0.255
groupname sc_ipmp0
ether 0:3:ba:29:8a:ac
eri0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 >index 2
inet 192.168.0.242 netmask ffffff00 broadcast 192.168.0.255
qfe0: flags=9040842<BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 3
inet 192.168.0.243 netmask ffffff00 broadcast 192.168.0.255
groupname sc_ipmp0
ether 0:3:ba:22:d4:36
qfe0:1: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu 1500 index 3
inet 192.168.0.250 netmask ffffff00 broadcast 192.168.0.255
qfe2: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 5
inet 172.16.0.129 netmask ffffff80 broadcast 172.16.0.255
ether 0:3:ba:22:d4:38
qfe3: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 4
inet 172.16.1.1 netmask ffffff80 broadcast 172.16.1.127
ether 0:3:ba:22:d4:39
clprivnet0: flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu 1500 >index 6
inet 172.16.4.1 netmask fffffe00 broadcast 172.16.5.255
ether 0:0:0:0:0:1Now I am able to plumb logical hostname ip. messaging resource group is able to swing over between nodes and resource group is able to go online (before creating messaging server resource (msg-rs).
after creating messaging server resource, use following command to start message resource group:
ms1@root #clrg online -eM msg-rgI used the following command to create message resource (msg-rs)
clrs create -g msg-rg -t SUNW.ims -x IMS_serverroot=/opt/sun/comms/messaging64 -y >Resource_dependencies=msg-l,msg-hasp-rs msg-rsBut still having problem in starting resource group after adding msg-rs
Please advise where I went wrong..
Thanks.

Similar logical host resource configured on 2 different resource groups

hi,
I had an issue with logical host setup as follows.
Background
We had a failover resource group RGA which is running a critical Oracle instance and listener process.
It has a logical host resource ora-lh-rs configured with logical host pointing to VirtualHostA.
I need to create another failover resource group called RGB with another Oracle instance.
Now at present this Oracle instance (Not under cluster control yet) is listening to the same logical host - VirtualHostA as RGA.
When I create this new resource group RGB, I need to configure it to share the same logical host as RGA.
The problem is if I need to add the logical host resource ora-lh-rs with VirtualHostA to this RGB, I foresee that there will be an IP address conflict if I failover RGB to the other cluster node (If my guess is wrong, but logically there should be an IP address conflict if SUN Cluster does not block me from adding the same logical host resource to RGB).
Question
Is there any other way to overcome this issue other than to configure the second Oracle instance to listen on a different logical IP?
To add, RGB is a less priority Oracle instance and will always need to be with RGA on the same node.
Any suggestions are welcome. My apology if this question sounds stupid as I do not have an UAT environment to test.
Thanks
ldd76

HI Tim,
Thanks very much for your kind advice. I must say that I have very little experience with SUN Cluster so I beg your pardon if my concept is too superficial.
The reason why I cannot put both Oracle instance in the same RG is because that' s my boss initial proposal. I will speak to her again on the log_only option.
But can I confirm that the command looks like this after I add the resources to RGA.
scrgadm -cj rgb-ora-rs -y Failover_mode=LOG_ONLY (Oracle server)
scrgadm -cj rgb-lsn-rs -y Failover_mode=LOG_ONLY (Oracle Listener)
scrgadm -cj rgb-hasp-rs -y Failover_mode=LOG_ONLY (HA Storage Plus)
As for the logical host questions, it has been legacy that both the Oracle instance listens on the same logical IP(Just that the new and less critical Oracle instance is not under cluster control yet)
But my gut feel for the reason behind this is that the less important Oracle instance is always running on the same node where RGA is running (since that Oracle instance is used for data warehousing with data replicated from the more critical Oracle instance only) else it is meaningless. Thats my guess why ony one logical IP is used.
If the direction is still to use RG_affinities, then if I tweak the following steps a bit will it work?
1) Create RGB.
2) Activate RGB - scswitch -Z -g RGB
3) Offline RGB - scswitch -F -g RGB
4) Failover RGA to the other node
5) Failover RGB to the other node
6) Offline RGB on the other node
7) Failover RGA back to the original node
8) Failover RGB back to the original node
Thanks.

Sun Cluster 3.2 - WARNING: Cannot enable monitoring on resource-group

clrg online -emM ora-1line-rg(C348385) WARNING: Cannot enable monitoring on resource ora-1line-rs because it already has monitoring enabled. To force the monitor to restart, disable monitoring using 'clresource unmonitor ora-1line-rs' and re-enable monitoring using 'clresource monitor ora-1line-rs'.
(logical host reference)
(C348385) WARNING: Cannot enable monitoring on resource ora-hastp-rs because it already has monitoring enabled. To force the monitor to restart, disable monitoring using 'clresource unmonitor ora-hastp-rs' and re-enable monitoring using 'clresource monitor ora-hastp-rs'.
(hastorageplus reference)
I am able to unmonitor and monitor the resources manually. What is the cause of these WARNING messages? This from Oracle and we have yet to complete the installation of HA-Oracle. Oracle is not installed and tnsnames.ora and listener.ora is not configured. Is this the reason? If so, could someone explain why you cannot online the resource group until after the application has been installed.
Thanks in advance,
Ryan

As the manual says for clrs create:
By default, resources are created in the enabled state with monitoring enabled. so when you issue the clrg online -emM it is just simply warning you that these other resources weren't disable. Note they wouldn't have been started because the RG would have been offline.
Does that explain it? If not, ask more questions.
Tim
---

Problem switching on resource group

I am in the process of setting up a new two node cluster. I do have Sun Cluster 3.2 installed on a pair of recently patched Solaris 10 T1000 servers.
I ran the command "scswitch -z -h mw3 -g ensemble-rg" and the command just hung it has not completed or timed out. I tried to stop the command with "scswitch -k -Q -g ensemble-rg" on the mw3 server but that also has not completed.
I tried to run "clresourcegroup online +" and "clresourcegroup offline -v +" and got the same message:
clresourcegroup: (C667636) ensemble-rg: resource group is undergoing a reconfiguration, try again later
What do I need to do to get the resource group and hosts completed?
Thank you,
Tom.

Hello Tim,
At this point there is nothing in the ensemble-rg. The logical host ens-perf has it's own ip address separate from the two nodes in the cluster and there is no other machine that answers on that IP address on the network.
What can I look at to show me what might be wrong with the cluster configuration?
Here is what is in /var/adm/messages for today:
Nov 20 09:02:47 mw3 Cluster.CCR: [ID 499775 daemon.notice] resource group ensemble-rg added.
Nov 20 09:03:27 mw3 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_validate> for resource <ens-perf>, resource group <ensemble-rg>, node <mw3>, timeout <300> seconds
Nov 20 09:03:27 mw3 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/rgm/rt/hafoip/hafoip_validate>:tag=<ensemble-rg.ens-perf.2>: Calling security_clnt_connect(..., host=<mw3>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Nov 20 09:03:27 mw3 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_validate> completed successfully for resource <ens-perf>, resource group <ensemble-rg>, node <mw3>, time used: 0% of timeout <300 seconds>
Nov 20 09:03:28 mw3 Cluster.CCR: [ID 973933 daemon.notice] resource ens-perf added.
The scswitch command that hung was started at 09:04:51 according to ps.
I still have the scswitch and clresourcegroup commands that are still hung.
I was creating the resource group to install the application on the cluster nodes - so I don't have any application logs to check at this point because this is a brand new cluster that I am setting up to test.
Here is the output for clrg status:
clrg status
Cluster Resource Groups ===
Group Name Node Name Suspended Status
ensemble-rg mw4 No Offline
mw3 No Pending online
I only have one resource group
From an scstat:
-- Device Group Servers --
Device Group Primary Secondary
Device group servers: ensemble mw3 mw4
Device group servers: journal mw3 mw4
Device group servers: wij mw3 mw4
-- Device Group Status --
Device Group Status
Device group status: ensemble Online
Device group status: journal Online
Device group status: wij Online
-- Multi-owner Device Groups --
Device Group Online Status
-- Resource Groups and Resources --
Group Name Resources
Resources: ensemble-rg ens-perf
Thank you,
Tom.

Add a resource to an existing resource group

Hi,
I configure two resources(AD, LDAP) as a resource group.
After assigning the resource group to some users, I add a resource (oracle) to the resource group.
How does IdM create users to an additional new resource?
By default, IdM does not create users automatically by detecting addition of resource.
Thanks in advance.

Hi,
I configure two resources(AD, LDAP) as a resource
group.
After assigning the resource group to some users, I
add a resource (oracle) to the resource group.
How does IdM create users to an additional new
resource?
By default, IdM does not create users automatically
by detecting addition of resource.
Thanks in advance.if i am not wrong....i assume u want to accomplish the following things
1)create a group of resources
2)assign users to that group
3)add additional resources to the group in point 1.
what u expect to see here is, that the users who were assigned to the group shud have their accounts created automatically on the new resource
if this is what u expect ...
i suggest that u create a ROLE ....and add the resources there...
ASSIGN this role to ur users...
henceforth whenever u add a new resource to the ROLE the already existing users assigned to the role will get their accounts automatically created on the new resources...
HOPE THIS HELPS

Switching resource group in 2 node cluster fails

hi,
i configured a 2 node cluster to provide high availability for my oracle DB 9.2.0.7
i have created a resource and named it oracleha-rg,
and i crated later the following resources
oraclelh-rs for logical hostname
hastp-rs for the HA storage resource
oracle-server-rs for oracle resource
and listener-rs for listener
whenever i try to switch the resource group between nodes is gives me the following in dmesg:
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <oraclelh-rs>, resource group <oracleha-rg>, node <DB1>, timeout <300> seconds+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 784560 daemon.notice] resource oraclelh-rs status on node DB1 change to R_FM_UNKNOWN+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 922363 daemon.notice] resource oraclelh-rs status msg on node DB1 change to <Stopping>+
+Feb 6 16:17:49 DB1 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 010.050.033.009:0, remote = 000.000.000.000:0, start = -2, end = 6+
+Feb 6 16:17:49 DB1 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 784560 daemon.notice] resource oraclelh-rs status on node DB1 change to R_FM_OFFLINE+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 922363 daemon.notice] resource oraclelh-rs status msg on node DB1 change to <LogicalHostname offline.>+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <oraclelh-rs>, resource group <oracleha-rg>, node <DB1>, time used: 0% of timeout <300 seconds>+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 443746 daemon.notice] resource oraclelh-rs state on node DB1 change to R_OFFLINE+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_postnet_stop> for resource <hastp-rs>, resource group <oracleha-rg>, node <DB1>, timeout <1800> seconds+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 784560 daemon.notice] resource hastp-rs status on node DB1 change to R_FM_UNKNOWN+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 922363 daemon.notice] resource hastp-rs status msg on node DB1 change to <Stopping>+
+Feb 6 16:17:49 DB1 SC[,SUNW.HAStoragePlus:8,oracleha-rg,hastp-rs,hastorageplus_postnet_stop]: [ID 843127 daemon.warning] Extension properties FilesystemMountPoints and GlobalDevicePaths and Zpools are empty.+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <hastorageplus_postnet_stop> completed successfully for resource <hastp-rs>, resource group <oracleha-rg>, node <DB1>, time used: 0% of timeout <1800 seconds>+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 443746 daemon.notice] resource hastp-rs state on node DB1 change to R_OFFLINE+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 784560 daemon.notice] resource hastp-rs status on node DB1 change to R_FM_OFFLINE+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 922363 daemon.notice] resource hastp-rs status msg on node DB1 change to <>+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 529407 daemon.error] resource group oracleha-rg state on node DB1 change to RG_OFFLINE_START_FAILED+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 529407 daemon.notice] resource group oracleha-rg state on node DB1 change to RG_OFFLINE+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 447451 daemon.notice] Not attempting to start resource group <oracleha-rg> on node <DB1> because this resource group has already failed to start on this node 2 or more times in the past 3600 seconds+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 447451 daemon.notice] Not attempting to start resource group <oracleha-rg> on node <DB2> because this resource group has already failed to start on this node 2 or more times in the past 3600 seconds+
+Feb 6 16:17:49 DB1 Cluster.RGM.global.rgmd: [ID 674214 daemon.notice] rebalance: no primary node is currently found for resource group <oracleha-rg>.+
+Feb 6 16:19:08 DB1 Cluster.RGM.global.rgmd: [ID 603096 daemon.notice] resource hastp-rs disabled.+
+Feb 6 16:19:17 DB1 Cluster.RGM.global.rgmd: [ID 603096 daemon.notice] resource oraclelh-rs disabled.+
+Feb 6 16:19:22 DB1 Cluster.RGM.global.rgmd: [ID 603096 daemon.notice] resource oracle-rs disabled.+
+Feb 6 16:19:27 DB1 Cluster.RGM.global.rgmd: [ID 603096 daemon.notice] resource listener-rs disabled.+
+Feb 6 16:19:51 DB1 Cluster.RGM.global.rgmd: [ID 529407 daemon.notice] resource group oracleha-rg state on node DB1 change to RG_OFF_PENDING_METHODS+
+Feb 6 16:19:51 DB1 Cluster.RGM.global.rgmd: [ID 529407 daemon.notice] resource group oracleha-rg state on node DB2 change to RG_OFF_PENDING_METHODS+
+Feb 6 16:19:51 DB1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_listener_fini> for resource <listener-rs>, resource group <oracleha-rg>, node <DB1>, timeout <30> seconds+
+Feb 6 16:19:51 DB1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <bin/oracle_listener_fini> completed successfully for resource <listener-rs>, resource group <oracleha-rg>, node <DB1>, time used: 0% of timeout <30 seconds>+
+Feb 6 16:19:51 DB1 Cluster.RGM.global.rgmd: [ID 529407 daemon.notice] resource group oracleha-rg state on node DB1 change to RG_OFFLINE+
+Feb 6 16:19:51 DB1 Cluster.RGM.global.rgmd: [ID 529407 daemon.notice] resource group oracleha-rg state on node DB2 change to RG_OFFLINE+
and the resource group fails to switch...
any help please?

Hi,
this forum is for Oracle Clusterware, not Solaris Cluster. You probably should close this thread and open your question in the corresponding Solaris Cluster forum, to get help.
Regards
Sebastian

How to determine current state of resource group?

Good morning!
I'm in the process of creating a monitoring policy which would alert if a specific resource group is in a state other than "online". Is there a command line executable available that I could utilize which would return the current status of a resource group? I know that the status is written to the /var/adm/messages file, but parsing that would be my last resort.
Thanks!

Check out:
man -M /usr/cluster/man scha_resourcegroup_get
in particular the options:
-O RG_STATE
and
-O RG_STATE_NODE
Tim
---

Rs-ora:resource group failed to start on chosen node; it may end up failing

I have configured two node failover cluster environment using netra a/d 1000 storage. When I try to deploy oracle server application it throws the following error
rs-ora: resource group failed to start on chosen node; it may end up failing over to other node(s)
I created metaset and gave one raw did disk to that metaset.
I created logical hostname resource, ha-storage plus resource. Later I brought the resource group to online using following command
#clrg online emM rg-ora
Later I created oracle cluster resource using following command.
#clrs create -g rg-ora -t SUNW.oracle_server -p ORACLE_HOME=/global/oracle/product/10.2.0/db_1 -p ORACLE_SID=infra -p Alert_log_file=/global/oracle/product/10.2.0/db_1/admin/infra/bdump/alert_infra.log -p Connect_string=sysdba/dbadmin1@infra -p Resource_dependencies=rs-ora-has rs-ora
node1 - Validation failed. ORACLE_HOME /global/oracle/product/10.2.0/db_1 does not exist
node1 - ALERT_LOG_FILE /global/oracle/product/10.2.0/db_1/admin/infra/bdump/alert_infra.log doesn't exist
node1 - PARAMETER_FILE: /global/oracle/product/10.2.0/db_1/dbs/initinfra.ora nor server PARAMETER_FILE: /global/oracle/product/10.2.0/db_1/dbs/spfileinfra.ora exists
node1 - This resource depends on a HAStoragePlus resouce that is not online on this node. Ignoring validation errors.
rs-ora: resource group failed to start on chosen node; it may end up failing over to other node(s)
The status of oracle resource shows as follows.
Resource Name Node Name State Status Message
rs-ora node1 Start failed Faulted
I used solaris 10 update 6 patch level is Generic_137137-09, Oracle version 10.2.0, Sun clusters 3.2 update1. Following are the vfstab and /var/adm/messages of both nodes.
Node1#grep ora /etc/vfstab
/dev/md/oradg/dsk/d300 /dev/md/oradg/rdsk/d300 /global/oracle ufs 5 no logging
Node2#grep ora /etc/vfstab
/dev/md/oradg/dsk/d300 /dev/md/oradg/rdsk/d300 /global/oracle ufs 5 no logging
Node1#more /var/adm/messages
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_prenet_start> for resource <ha-
host-1>, resource group <rg-ora>, node <node1>, timeout <300> seconds
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hafoip/hafoip_prenet_start>:tag=<rg-ora.ha-host-1.10>: Calling security_clnt_connect(..., host=<node1>, sec_typ
e {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_prenet_start> completed successfully for
resource <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <300 seconds>
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_prenet_start> for resour
ce <rs-ora-has>, resource group <rg-ora>, node <node1>, timeout <1800> seconds
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hastorageplus/hastorageplus_prenet_start>:tag=<rg-ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<tes
tlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:18 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<2>:cmd=<null>:tag=<rg-
ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
Oct 17 05:19:18 node1 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <rg-ora.rs-ora-has.10>
has been suspended.
Oct 17 05:19:20 node1 Cluster.Framework: [ID 801593 daemon.notice] stdout: becoming primary for oradg
Oct 17 05:19:21 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<3>:cmd=<null>:tag=<rg-
ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
Oct 17 05:19:21 node1 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <rg-ora.rs-ora-has.10>
has been resumed.
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_prenet_start> completed successful
ly for resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <1800 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_start> for resource <ha-host-1>
, resource group <rg-ora>, node <node1>, timeout <500> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hafoip/hafoip_start>:tag=<rg-ora.ha-host-1.0>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEA
K, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_start> completed successfully for resourc
e <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <500 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_start> for resource <ha
-host-1>, resource group <rg-ora>, node <node1>, timeout <300> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_start> for resource <rs-
ora-has>, resource group <rg-ora>, node <node1>, timeout <90> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hafoip/hafoip_monitor_start>:tag=<rg-ora.ha-host-1.7>: Calling security_clnt_connect(..., host=<node1>, sec_typ
e {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hastorageplus/hastorageplus_start>:tag=<rg-ora.rs-ora-has.0>: Calling security_clnt_connect(..., host=<node1>,
sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_start> completed successfully for
resource <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <300 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_start> completed successfully for
resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <90 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_monitor_start> for resou
rce <rs-ora-has>, resource group <rg-ora>, node <node1>, timeout <90> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hastorageplus/hastorageplus_monitor_start>:tag=<rg-ora.rs-ora-has.7>: Calling security_clnt_connect(..., host=<tes
tlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_monitor_start> completed successfu
lly for resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <90 seconds>
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_validate> for resour
ce <rs-ora>, resource group <rg-ora>, node <node1>, timeout <120> seconds

Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor/
oracle_server/bin/oracle_server_validate>:tag=<rg-ora.rs-ora.2>: Calling security_clnt_connect(..., host=<node1>, sec_type
{0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <bin/oracle_server_validate> completed successful
ly for resource <rs-ora>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <120 seconds>
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_init> for resource <
rs-ora>, resource group <rg-ora>, node <node1>, timeout <30> seconds
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor
/oracle_server/bin/oracle_server_init>:tag=<rg-ora.rs-ora.4>: Calling security_clnt_connect(..., host=<node1>, sec_type {0
:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <bin/oracle_server_init> completed successfully f
or resource <rs-ora>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <30 seconds>
Oct 17 05:19:38 node1 Cluster.CCR: [ID 973933 daemon.notice] resource rs-ora added.
Oct 17 05:19:39 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_start> for resource
<rs-ora>, resource group <rg-ora>, node <node1>, timeout <600> seconds
Oct 17 05:19:39 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor
/oracle_server/bin/oracle_server_start>:tag=<rg-ora.rs-ora.0>: Calling security_clnt_connect(..., host=<node1>, sec_type {
0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:48 node1 SC[SUNWscor.oracle_server.start]:rg-ora:rs-ora: [ID 876834 daemon.error] Could not start server
Oct 17 05:19:48 node1 Cluster.RGM.rgmd: [ID 938318 daemon.error] Method <bin/oracle_server_start> failed on resource <rs-o
ra> in resource group <rg-ora> [exit code <1>, time used: 1% of timeout <600 seconds>]
Node2# more /var/adm/messages
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group rg-ora state on node node2 change to RG_PENDIN
G_OFFLINE
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_MON_STOPP
ING
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_MON_STOPPI
NG
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_stop> for resource <ha-host
-1>, resource group <rg-ora>, node <node2>, timeout <300> seconds
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_monitor_stop> for resource <
rs-ora-has>, resource group <rg-ora>, node <node2>, timeout <90> seconds
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 268902 daemon.notice] 45 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hafoip/hafoip_monitor_stop>:tag=<rg-ora.ha-host-1.8>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK
, 1:STRONG, 2:DES} =<1>, ...)
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hastorageplus/hastorageplus_monitor_stop>:tag=<rg-ora.rs-ora-has.8>: Calling security_clnt_connect(..., host=<node2>, s
ec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_monitor_stop> completed successfully f
or resource <rs-ora-has>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <90 seconds>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_ONLINE_UN
MON
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_STOPPING
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource rs-ora-has status on node node2 change to R_FM_UNKNO
WN
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource rs-ora-has status msg on node node2 change to <Stopp
ing>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_stop> for resource <rs-ora-h
as>, resource group <rg-ora>, node <node2>, timeout <1800> seconds
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hastorageplus/hastorageplus_stop>:tag=<rg-ora.rs-ora-has.1>: Calling security_clnt_connect(..., host=<node2>, sec_type
{0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_stop> completed successfully for reso
urce <ha-host-1>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <300 seconds>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_ONLINE_UNM
ON
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_stop> completed successfully for resou
rce <rs-ora-has>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <1800 seconds>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_STOPPED
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_STOPPING
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <ha-host-1>, res
ource group <rg-ora>, node <node2>, timeout <300> seconds
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ha-host-1 status on node node2 change to R_FM_UNKNOW
N
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ha-host-1 status msg on node node2 change to <Stoppi
ng>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hafoip/hafoip_stop>:tag=<rg-ora.ha-host-1.1>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRO
NG, 2:DES} =<1>, ...)
Oct 14 20:20:06 node2 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 192.168.032.244:0, remote = 000.000.000.000:0, s
tart = -2, end = 6
Oct 14 20:20:06 node2 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ha-host-1 status on node node2 change to R_FM_OFFLIN
E
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ha-host-1 status msg on node node2 change to <Logica
lHostname offline.>
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <ha
-host-1>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <300 seconds>
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_OFFLINE
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_POSTNET_S
TOPPING

Sharing resources among resource groups in Sun Cluster 3.1

Hi all,
Is it possible to share a resource among resource groups. For example:
lh: resource of type Logical Hostname =lh-res
/orahome: Oracle binaries and configuration files = orahome-res
/oradata1: Data for instance 1 = oradata1-res
/oradata2: Data for instance 2 = oradata2-res
rg1 ( resource group for Oracle instance 1) ora1-rg = lh + orahome-res + oradata1-res
rg2 (resource group for Oracle instance 2) ora2-rg = lh + orahome-res + oradata2-res
Thanks,
Enrique

Hi Enrique,
if lh represents the same address and the same resource name then the answer is: No not possible one resource can belong to only one resource group.
If it would work and both rg's are running on different node you would create duplicate ip adress errors which can not be your intent.
Which behavior do you want to achieve?
Detlef

No user groups created while opening Ad HOC Query

Hello Folks,
When I try to open "S_PH0_48000513 - Ad Hoc Query" under Human Resources->Information System->Reporting Tools I get the error message "No user groups created".
Can someone please let me know what kind of groups are needed to be created and how (details) so that I can use the Ad Hoc Query Program.
SAT

Hi,
Create a user group in SQ03 and attach query .
Regards,
Manoj.

No Resource Group created

Similar Messages

Maybe you are looking for