No respond from DTW after try to connect.

By SAP B1 2005A PL14 , DTW 2005.0.7 .
system let we type server & database source & database destination then
click OK. BUT system let we wait lonnng time and the system no respond.
we try many time but still CANNOT connect to database. Why? how do we
do?

hi ,
        when u r giving the user name and pwd in dtw, that time click the "option " button.
then tick the check box in " Use windows authentication"
then try to enter.
regards
sandip

Similar Messages

  • Ipod dissapearing from itunes after long time connected?

    I am not sure on the time it takes.. or if there is a set time... but my ipod dissappears from my Itunes list (i have to unplug/replug to get it to resynch)
    Its still seen in windows as connected via USB.
    Its the latest 7.0.70 itunes and 1.2 for my 5th gen gen 1 ipod

    Just a quick update. (and possible quick fix) I checked "enable disk use" on both of my ipods. I then enjected my nano and hooked it back up and my 5.5G iPod did remain on the source list as did the Nano. I suspect if I did the same thing but only ejecting the 5.5G iPod that the Nano would also remain connected. I just did this, so I don't know if this quick fix will help keep your iPod connected to the source list or not. I'll post back later if one of my iPods drops off the source list again. I have a sneaky suspician disk use won't allow the iPod to drop off the source list.

  • Server stopped responding message when i try to connect to my wifi.

    reset internet settings. turned on airplane mode and then off. did the forget this network and reconnected. hooked to pc and got upgrades (i think) did latest downloads, etc.

    reset internet settings. turned on airplane mode and then off. did the forget this network and reconnected. hooked to pc and got upgrades (i think) did latest downloads, etc.

  • My ipod 4th gen i got from a friend is permently disabled and when i try to connect it to itunes and restore it it does it for a few minuites then thee ipod goes off that screen and turns on by itself and ive already done this a few time help please??

    my ipod 4th gen which i got from a friend is permanently disabled and when i try to restore it, it starts to restore it then my ipod goes off the "connect to itunes" screen and turns on by itself and doesnt restore i need to know how to fix this problem??
    does anyone have any solutions?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • No sound from tv after laptop connected (G60)

    Hi
    It is no sound from TV, after i connecting my laptop to tv through hdmi cable on hdmi port 1.
    However, the image looks ok.
    I open the sound control panel, see NIVDIA HDMI OUTPUT SEEMS WORKING, (SET DEFAULT), BUT THE VOLUME IS VERY LOW, AND NO TEST SOUND COMING OUT FROM TV EITHER.
    I tried to set up the audio system in NIVDIA control panle under VIDEO AND TV as instruction in HELP of NIVDIA help manual. But i just cannot find the audio system set up.
    anyone can help on this,
    Very appreciated!
    Tnx
    My email is
    [text removed for privacy]

    Try this, it works on my PC:
    Connect HDMI cable to TV. 
    In the Control Panel, select "Sound" by double-clicking it.
    Click the "Playback" tab and look for an icon for your television.
    Highlight the TV icon and then select "Set Default".  A green checkmark should appear on the TV icon.
    You should now hear sound from the TV when your HDMI cable is connected, and sound from your PC when the cable is not connected.
    Marty
    dm4t  i5-430M  4GB-RAM  IntelGraphics

  • Cannot connect to FB from "Settings" after IOS 6 - the FB-app works correctly

    Cannot connect to FB from "Settings" after IOS 6 - the FB-app works correctly - but logging in from the settings to be able to "match" my contacts just doesn´t work. It just keeps "porcessing", when I try to login. Any good advice?

    I found a fix. I hope this helps.
    http://www.dencio.com/2012/01/fixed-facebook-20-and-twitter-20-for.html
    I hope it works for you.
    Dencio

  • Adobe Connect user dropping from Meeting after ~30sec

    We have a lot of users using Adobe Connect from multiplae sites around the country. One particular site (and one site only) is having difficulty staying connected to a meeting. They are able to successfully log into the meeting and can see the meeting room. After ~30 seconds each time they are booted from the room. Is this a common problem that anyone has seen? The only other problem we have come accross is users getting stuck at the loading screen and the meeting never launching but thet had to do with not allowing the FMS ip address through firewalls.
    Had anyone else experienced users being disconnected after ~30 seconds. It happens every time they try to connect. Apparently it goes to a "Connection lost, waiting to connect" screen. I know they are not physically losing connection as other services stay online. Some idea we had were packet inspection or time to live settings. Any ideas?

    It sounds to me like there is some other issue with their connectivity. It could be an IT policy that monitors for streaming traffic and intrupts it (to keep people from watching movies or such), or it could even be a saturation of their network, and Connect doesn't have priority so it gets dropped. From your description it definitly sounds like there is something happening at that location that is preventing individuals from attending the meetings.

  • Error when i try to connect with blogger from firefox

    when i try to connect with blogger.com and i enter my password the firefox is loading me as it should and then it returns to the blogger page...
    it doesn t say that i put the password wrong it does not say anything its like i m stuck there...i can connect to gmail
    but not to blogger and since the problems occurs only with firefox , as i can connect with other explorers i suppose the problem comes from firefox
    i reinstalled the firefox nothing changes
    also at blogger the firefox crashes in a way that it shows on the top of the page an error instead of the blogger links(connect , new post etc)

    See if this helps you. <br />
    http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • After updating to iTunes 11.1, i'm getting error 42404. Everything's working fine though, other than my iPod classic which is now getting automatically ejected when I try to connect it.

    I'm on Windows 8 64bit, and I have a 160gb iPod classic which has worked perfectly on all versions of iTunes including 11. Just a couple of days ago I updated to 11.1, and now when I open iTunes it gives me that error message. Re-installing or repairing iTunes has absolutely no effect, I've done that about 10 times now.
    Everything in the program actually works fine, but when I try to connect my iPod, it says "connected, do not disconnect" for about 10 seconds before flashing up the "sync in progress" screen for about half a second, and then it goes to "okay to disconnect".
    I have connected the iPod in disk mode and exactly the same thing happens.
    Any ideas? Is my iPod now a brick until apple does another update?

    Upgrading to itunes 7.0 just cost me 2 days of messing around and in the end I had to revert back to v6.0 and resore my lib.
    Apple CS was good but did not belly up the fact that 7.0 is defective in some cases and in the end told me I had a hardware problem!
    The main issue is that I could not get itunes 7.0 to see my ipod (very infrequently after a hard boot I would see it but would not be able to upload anything). Worked(s) 100% with v 6.0.
    This is very defintey 1/2 baked following in the steps of the other well known producers of sw that is not always functional/buggy the first time around.
    My computer is a x40 IBM laptop with xp sp2. Will have to wait a few more weeks to see how this pans out.
    IBM X40 Windows XP

  • TS1368 HELP!!! After upgrading to IOS 6.13 my IPAD Stucks in a plug-in screen and the Itunes. When i Try to connect to iTUNES pop-up message apear "iTunes has detected an iPad in recovery mode.. You must restore this iPad before it can be used with iTunes

    I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!

    Turn off your firewall and antivirus software.

  • Lost internet connection while restoring iphone 4S from backup after iOS 6

    Hi everyone..
    I have just updated my iPhone 4S to iOS6 yesterday. It was iOS5.1.1 and was in jailbreak mode before the update.
    I did sync my iphone and did the 'Backup' as well before the update by using my latest iTunes via my laptop.
    The iOS6 update was successful.
    However, the 'Restore from backup' failed.. many times!! Everytime I tried to Restore from backup, i lost internet connection towards the end of the 'restore in progress'  process so it was never complete. I had to pull out the iphone cable or restart my pc every single time that happened. Because i cannot get an internet connection after that happened. I cannot connect to any wireless network, so I had to restart the pc!
    (the iPhone says 'Restore complete' as soon as I pulled out the cable. But phone stays as NEW phone, none of my backup data was restored).
    During the 'restore from backup' attempts (via iTunes 10.7 on laptop), I have tried:
    - Restoring to factory settings first and then restore from backup = tried many times and still failed.
    - Uninstalled Apple mobile device and iTunes and re-installed them = still failed.
    - Switched OFF the phone and hold the Home button while connecting to the laptop. Restored to factory settings, then tried to restore from backup = still failed!!
    - switching to different USB ports on my laptop including USB 2.0 and USB 3.0 = no luck, still failed.
    NOTES:
    -Laptop is on Windows 7 and have had NO such problems so far. I have been using iPhone since 3GS.
    -Internet connection is via wireless router, steady connection.
    -My 3GS was on jailbreak mode before. I bought iPhone 4S and successfully restored from my '3GS backup' without any problem.
    -iTunes 10.7 installed/updated.

    Nevermind.. I just found the solution to my problem.
    I copied the Backup folder into my mate's laptop and did the 'Restore from backup'.
    All is good now.. Only need to re-install my apps, soon after all will be back as per normal!

  • HT1351 Whenever I try and eject my iPod from iTunes after it is done syncing a box pops us that says "The iPods' 'Owners iPod' cannot be ejected because it contains files that are in use by another application".

    Whenever I try and eject my iPod from iTunes after it is done syncing a box pops us that says "The iPods' 'Owners iPod' cannot be ejected because it contains files that are in use by another application".iTunes is the only thing open on my computer so I don't understand what this could mean.  If anybody could help me out that would be great. Thanks

    Hello, cgtyoder. 
    Thank you for visiting Apple Support Communities. 
    Try resetting the iPod and power cycling your Mac to see if this message disappears.  If the issue persists you may need to restore the device to factory settings.  The article below will walk you through both these steps.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    Cheers,
    Jason H.

  • I have an Ipod touch 2nd generation 8gb. Metal peice fell out from the inside where the home button is and I lost it. Put the screen plug in and put the screen on and it would turn on but it won't unlock or respond to anything I try to do. PLEASE HELP ME!

    I have an Ipod touch 2nd generation 8gb. Metal peice fell out from the inside where the home button is and I lost it. Put the screen plug in and put the screen on and it would turn on but it won't unlock or respond to anything I try to do. PLEASE HELP ME!!!!!!!!!!!!!!!!!!!

    Look her and it may give insite on what is missing. Otherwise:
    Apple will exchange your iPod for a refurbished one for $99. Likely not worth it for a your iPod. They do not fix yours.
    Apple - iPod Repair price              
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Repair it yourself if you are up to it
    iPod Touch Repair – iFixit

  • My new Mac Air continues to disconnect from WiFi after going to sleep.  When waking it up I have to manually re-connect.  How do I keep it connected?

    My new Mac Air continues to disconnect from WiFi after going to sleep.  When waking it up I have to manually re-connect.  How do I keep it connected?

    I had this problem too and solved it by doing a clean install. After that it was gone.
    This is a drastic method since it takes quite some time to reinstall lion and all your software.
    Thoughts I had why it started working after a clean install are the following:
    It looked like the airport wasn't able to reconnect fast enough before the connection timed out. So what could have prevented my mac from being able to connect fast enough?
    Apps that consume processor cycles. I love what I would call 'System Enhancers', little apps that enhance my workflow (Moom, Alfred, Dropbox, Default Folder etc). I'm not saying that these are the problem, they might be programmed processor friendly, but check if you have apps that consume processor cylcles. It might prevent airport from being able to reconnect quickly enough before it times out.
    Mobile Config profiles. Another thought I had was that I had a mobile config 802.1X profile installed for the company were I worked. It used TTLS to connect to the corporate network. This profile might have gotten in the way.
    And a sidenote...
    Routers with hardware acceleration might also be a problem. My router is a Wireless Gigabit Router 300N WL-351 and has hardware acceleration. As soon as I activate that my wifi connection keeps dropping. It is as if a Macbook Air can't handle that amount of optimisation.
    That's it, hope it helps those who are still having the problem.
    Best, Jan

  • HT1414 I got my iPhone 4 unlocked from AT&T but whenever i try to connect my phone to iTunes for restoring,  iTunes say me "there is no sim card installed in the iphone you are attempting to activate."

    I got my iPhone 4 unlocked from AT&T but whenever i try to connect my phone to iTunes for restoring,  iTunes say me "there is no sim card installed in the iphone you are attempting to activate."

    sorry. you cannot discuss and find solution about the jailbroken phones in this forum.

Maybe you are looking for

  • DVD DL failed, error code 0x26, 0x00 ?

    Made project in iDVD 6.0.4, going to burn DVD DL Verbatim disk, encoding gets all the way to finish and starts to write to disk, disk spits out with error code >The recording device reported the illegal request: Invalid field in parameter list. (0x26

  • Can i upload ebook to cloud then link to my website

    i need a url   www etc to link page creator ebook to my website

  • Find the needle in the css

    can someone please take a look at the css in this blog and tell me where to find the code that controls the background color of the main panel? http://www.joequint.com/ http://www.joequint.com/wp-content/themes/fspring_widgets/style.css thanks.

  • Bluetooth Setup Assistant is preventing me from logging on.

    I am currently using my older iMac in conjunction with my Macbook so that I can reply in Mail which is something I have not been able to do on my Macbook since downloading Mavericks in December.  (Yes, I've tried to fix that and have spent hours and

  • Blue screen then restart?

    Mac OS 10.3.9 Eudora 6.2.3 I was on the Internet and clicked on an email in the Eudora In mailbox and I got a blue screen followed by a restart putting me at the login window. What happened? powerbook G4   Mac OS X (10.3.9)