No responsability for Bluetooth

Bought a Nokia 6700, main purpouse to use as modem with computer for internetaccess using ovi. Later found out that Nokia uses Bluetooth version 2.1 and the Samsung NC10, mini-PC uses version 2.0. Called Nokia support who kindly told me that Nokias Bluetooth only is guaranteed to work wit Nokias products and no other. Come on Nokia, this is 2010. Of course, now I have bought my phone and Nokia can laugh all the way to the bank with my money. This is surely one thing you don't expect, a phone should be back compatible with older versions of software. But of course, I can always use the phone as a rock if attacked by stray dogs, so maybe I can have some use of it.

I would say you are unfairly directing your anger towards nokia when it should be towards samsung. Fair enough they gave you a stock BS reply instead of offering any help but that's what you get from scripted call centres nowadays.
I've had nokia's that use the newer 2.1 standard and they worked fine with my HP netbook, MSI netbook, Packard Bell desktop, a bluetooth dongle at work and other phones. All were running the older 2.0 standard.
So it looks like the bluetooth in the samsung netbook (or it's drivers) are the real issue here. Perhaps you should update your drivers, try a bluetooth dongle or ask samsung why it won't work with a newer product?

Similar Messages

How can I make a shortcut for bluetooth in my iPhone 4 ?

Hello everyone
How can I make a shortcut for bluetooth in my iPhone 4 ?

sorry not that I know of, out of the box that is, would be heady to quickly change between headset and normal mode though
let apple know you want this feature
http://www.apple.com/feedback/iphone.html
there are 3th party solutions though
http://www.macrumors.com/2012/04/17/new-app-turns-bluetooth-on-and-off-with-one- touch/

Please restore e-mail or at least give us some real information. Tech support is almost smug in their response for additional information. The iCloud status page has said the same thing since yesterday. A real dis-service. My business depends on this!

Please restore e-mail or at least give us some real information. Tech support is almost smug in their response for additional information. The iCloud status page has said the same thing since yesterday. A real dis-service. My business depends on this! Any one have any suggestions not being offerd by tech support or Apple? Anything at all?

mdjb wrote:
I just lost a big opportunity to get a new client because of this!! almost 24 hours now without any email service. I was one of the original.mac customers. I am over this time to move on. It is an inferior product.
My sympathy, but, this is what you agreed to when you chose to use a free system: (From terms of service agreement, iCloud)
APPLE DOES NOT GUARANTEE, REPRESENT, OR WARRANT THAT YOUR USE OF THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE, AND YOU AGREE THAT FROM TIME TO TIME APPLE MAY REMOVE THE SERVICE FOR INDEFINITE PERIODS OF TIME, OR CANCEL THE SERVICE IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT.
And this is no different from any other free service I'm afraid. Pay for your mail, then you have the right to expect service.

TIP for Bluetooth, Vista 64-bit, and PalmZire72

I'm indebted to all the folks who have added so much to the discussion and hopeful solutions to the VISTA 64-bit problem for those of us who desperately want to keep using our dependable PALM devices. (Too bad that Palm as a company is not so dependable!)
I got a Palm Zire 72 back in 2004 and it has become a vital part of doing business and living life since that time.
I've always synced to Outlook2003 for my Calendar, Contacts, Tasks, & Notes.
When I bought a new laptop with VISTA 64-bit, I had forgotten my previous determination to NOT go with 64-bit. However, the price was too good on a last display model HP and I grabbed it, 64-bit VISTA notwithstanding.
Then I did research here on this forum and I knew I needed a bluetooth adapter that had at least SOME success with VISTA 64, but I didn't read far enough to steer me to the Iogear adapters that seem favored here.
I bought an off brand AZIO from NewEgg after reading of others having some success with this adapter.
I hope my observations can help others, either with these or other brands that may have the same problems.
I already had my MSOffice installed on the HP, and had backed up my full Personal Folders from the old Compaq and then pointed the new installation to a copy of the PST file, which brought over everything including emails to the new PC.
This was probably not the best way to go because I got myself into a pickle because I used the new PC for downloading emails, but I could not sync to this PC with my Palm
I also downloaded the latest PalmDesktop, version 6.2 by Access and installed it to the PC, telling it that I wanted to sync to Outlook for my Calendar, Contacts, Tasks, Memos, and some other things I'm unsure of now.
Anyway, once I got the AZIO adapter, I installed it to the PC and tried to address the various issues before trying to sync.
I made sure the name on my PalmZire72 matched the name PalmDesktop used for me.
I checked my Device Manager and it listed my Bluetooth Device (with about 5 line items showing as various Toshiba Bluetooth devices, since the AZIO uses the Toshiba Bluetooth stack for its drivers. There was also a bluetooth radio listed there.)
I tried to setup my devices with the Palm device, turning on Bluetooth, making it discoverable, but I got no Bluetooth option listed when I looked at the possible HotSync methods. I could only choose USB or Network or Serial, but no Bluetooth option.
I selected Serial and tried to use a Port that I could see in Device Manager on the PC under Ports. I tried using all the ports showing as connected to the Toshiba device but none of them allowed a HotSync to work.
I created a port using the Bluetooth Local COM program listed at the bottom of my programs within the Control Panel on the PC. I pointed the Palm Serial Sync to that port but still no luck.
The weird thing was that I KNEW my PC and PALM were talking because they each would discover the other and know the correct name I had given the other device. I knew the Bluetooth device was connecting somehow, but every time I ran the Setup Devices on the PALM bluetooth setup, it would end with the "port being used by other application" message.
I ALSO noted that even though Device Manager knew I had the bluetooth device installed, I NEVER found any such devices listed in the Bluetooth Devices program that I could pull up from either the tray icon or from Control Panel. It would always be empty and I couldn't get it to discover any device on my computer.
I tried various uninstall/reinstalls of both the PalmDesktop and the USB Bluetooth adapter, but nothing changed anything. Each time I could verify that the Palm and the PC would identify the other one by correct name I would assign, but I could never get a device listed in the critical Bluetooth Devices program and HotSync would fail.
FINALLY, after giving up and buying a new Iogear GBU421 WM adapter tonight when I found one at WalMart, I came home and began the battle again.
But I couldn't quite give up on this AZIO without ONE more try at it. I had read about installing Generic drivers in place of the ones given with a device, and I don't even think these were in the same setup as mine, but I wanted to give it a shot. These were on the "Vista 64 Hotsync solution found" thread that has so much info on it. I posted a new thread simply because I hope this specific piece to the puzzle may be found a bit quicker in its own thread.
I went to Device Manager, looked at the various drivers, wondered which one to change first, and decided to change the Bluetooth radio driver first. I don't know why. Lucky guess? :-)
It seems to me it may not have had a Toshiba designation as did the other various ones listed there.
Then I also changed the Toshiba RFCOMM listed, and pointed it to something different. It was guesswork at best, but I was searching for generic drivers.
After this, the other Toshiba Bluetooth devices mostly disappeared from the Device Manager list of Bluetooth devices. It now also divided them into TWO categories, Bluetooth and Bluetooth Radios.
Bluetooth only shows a Bluetooth RFCOMM.
Bluetooth Radios shows a Generic Bluetooth Radio and a Microsoft Bluetooth Enumerator.
None of these shows a red X or other problem mark.
In my Systray, however, I show a normal blue/white icon for Bluetooth Devices and a blue/red icon for Bluetooth Manager.
The Devices window will show my Palm Zire listed with my assigned name.
The Bluetooth Manager window, identified as Bluetooth Settings, shows nothing. No connections are listed and if I click on New Connection, I'm told that "Bluetooth is not ready."
Nonetheless, I am Hotsyncing successfully!!!
The first try, (after going to generic drivers and thus actually being able to "Pair Devices" via the Bluetooth Devices window) seemed so slow that I may have given up prematurely.
I finally hit "Cancel" on the Palm device, which seemed to hang forever and not be able to get out of that loop, so I forced a shut down via the power off button.
Then I also had to to a Ctrl-Alt-Delete to force the HotSync to shut down on the PC as well.
I did a soft reset of the PalmZire and I restarted the PC after that. The next time I tried to HotSync, it didn't hang on Step 1 (of 12) even though it WAS VERY SLOW. I have a LOT of appointment info etc that I save and there was a lot to have sync for the first time on this PC.
I got a message that this device (the Palm) had synced before on another PC, and did I want to allow this to proceed since it might create lots of duplicates. I chose to let it go ahead. It did create a fair number of duplicate appointments, but mainly on in the repeating appointments type. I just went through these in Outlook and deleted one of each duplicate, deleting the whole series when I did. The next HotSync went very fast, and cleaned all these duplicates up on the Palm as well.
I have not restarted again yet, and I am not sure all is going to remain in place, but I know now that I can probably make it work out. The lack of anything listed in the Bluetooth Settings window on my PC does concern me, but I'm hopeful it won't be an issue. I don't expect to use Bluetooth for anything else, at least for now.
After all the hours I have fussed and read and griped, I am hopeful I have it worked out. I strongly suggest reading the thread mentioned above about HotSync solution found, but in addition to the other factors you have to address, remember to try changing drivers if your bluetooth doesn't work right away. (If it does, consider yourself HIGHLY BLESSED!)
Well, I gotta quit this short novella and go to bed, but I hope this helps someone else manage to set up bluetooth on a 64-bit VISTA system.
How in the world does anything as helpful as a PALM go out of business? It must have taken a lot of concerted effort by management to destroy the future of such a helpful piece of hardware!
Hang in there, Zire; I need you to keep working till a suitable alternative comes along. I doubt it'll be a Crackberry!
Dale
Post relates to: Zire 72

Further notes: When I allowed my PC to come back up from a Hibernate state, there was an error message waiting for me that said something like Port 5 is busy; Will wait till port is open" or something like that.
However, the Port I had been using (that I created for HotSyncing) was Port 8, which had worked. I don't know why this happens, but it seems to repeat itself if I do not do a clean boot.
As long as I restart the PC or boot from a shut-down state, my adapter seems fine and Port 8 is available and does work for the HotSync.
It was VERY slow on the first HotSync that had to run MANY procedures and lots of calendar stuff, but now the HotSyncs are SO FAST. Much faster than they were with the USB and Windows XP.
I have now turned my Firewall ON and it does NOT affect the HotSync. (I DID go into the Firewall setup and added Bluetooth Settings, HotSync Manager, and Palm Desktop to the exceptions list to ALLOW these through the Firewall.)
My antivirus program also does not seem to cause any problems for the HotSync, even though it does have to interject itself each time the Outlook data gets accessed. It just verifies that there is no virus activity going on, so it makes a momentary pause as Outlook info is updated.
I also have found that the HotSync runs fine whether Outlook is already open or not.
So far, I'm quite happy things are smoothing out!! Let's hope it continues.

Windows Vista claims for "Bluetooth Peripheral Device" driver

When I connect my iPhone via bluetooth to my computer for "tethering", Windows Vista claims for "Bluetooth Peripheral Device" driver and i can´t connect.
Where is the driver? Anyone knows it?
Thanks!

My Mac Book Pro decided to update with windows update ... I lost bluetooth and when my machine started up it said found new hardware ... and proceeded to look for the driver BCM2046A ... its not on the Mac Discs nor on the XP Disc ...
I searched and searched and searched ..bump
I then found this link download and use ... and pass on ....
http://www.broadcom.com/support/license.php?file=SetupBtwDownloadSE.exe

How to restrict bidders must response for all items?

hi experts
   we used SRM7.0 with Standalone Scenario.
   we need to restrict the bidder response for all items. in RFx items tab page, there is a checkbox 'RFX response Required for All items'. but it is doesn't work for this purpose. If the bidder reponse without price, they get warning message "Line 0001: '0' in the price field means that you are offering the item for free " . [there should be no free goods]
   how to solve it?    thanks in advance.
regards
    claud

Hi,
In RFx, in Item tab, you have an indicator "RFx Response required for all the items", but unfortunately it does not work! I don't know why?
One way to make it is, to do validation using BBP_DOC_CHECK_BADI. Other way is to create subline items under outline and check the "lot" indicator for the outlne. For this, you must have assigned HIER_SRM to the process type of RFx and RFx Response. Also refer to note 1267549 while making this assignment. Then if the bidder quotes for one item, then he/she has to quote for all items.
If you wanted to allow bidder to quote there own quantity check "Bidder can Change Quantities" in item tabl of RFx. Then the bidder gets separate columns as Required Quantity and Submitted Quantity. However note that, the system will not generate any message if the bidder quotes more than the required quantity. If you wanted to so, you need to validate the entry using the same BAdI.
Hope this has answered your question.
Ganapathi

Vendor Responsibility for Purchasing Groups

Hi experts!
We should assign vendor responsibility for purchasing groups, what means depending on which vendor / source-of-supply is selected in the shopping cart the correct purchasing group is assigned.
Do you have any idea how to handle this in SAP standard?
Can we use a BADI to help out?
Many thanks for your ideas.
Best regards,
Corinne

Hi
Lots of BADIs are there, which can help out ->
BBP_PGRP_ASSIGN_BADI EBP Purchasing Documents: Assign Purchasing Group(s)
BBP_PGRP_FIND Shopping Cart: Determine Responsible Purchasing Group(s)
<u>Related links to check out -></u>
Re: How to assign purchasing organization to a vendor using the GUI interface??
Multiple purchasing group responsibility?
Re: SRM 5.0 - Assign user to multiple purchasing groups?
Re: Purchasing Group and User Assignment
How can we change the purchasing group which it is maintained in R/3?
vendor not intended for a puchasing org
<u>Other related BADIs -></u>
BBP_DOC_CHANGE_BADI
BBP_DOC_CHECK_BADI
Hope this will definitely help.
Regards
- Atul

PO 7.4: NW BPM: HTTP Error response for SOAP request or invalid content-type.HTTP 200 OK

Hi Experts
I am trying to call NW BPM scenario(File to BPM) from PI, and using below adapter config.
I am getting below error.
Failed to call the endpoint: Error in call over HTTP: HTTP 200 OK
SOAP: Call failed: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.; HTTP 200 OK
SOAP: Error occurred: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.; HTTP 200 OK
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.; HTTP 200 OK
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.; HTTP 200 OK
Any idea how to fix this issue?
Thanks,
Sandeep Maurya.

Hi Sandeep,
Test the URL from your browser and check the proxy settings as well.
Refer the below links
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT
SOAP: Call failed: java.io.IOException: Failed to get the input stream from socket: java.net.SocketException: Connection…
Regards
Bhargava Krishna

HT204368 iPhone continues to search for bluetooth devices even when connected thus affecting battery.

iPhone 4S continues to search for bluetooth devices even though it is connected to one.
Can this be stopped to save battery?

Why do you believe this is true? If you're looking at the bluetooth settings page, simply opening that page in settings initiates the search. It stops when you close it.
Like the light in your fridge.

SOAP Receiver Error: HTTP Error response for SOAP Request

Hi gurus,
I'm facing a weird error in File --> PI 7.31 java only --> soap receiver proxy.
The other interfaces runs well. just one get the the following error:
Exception caught by adapter framework: java.io.IOException: Error receiving or parsing request message: java.io.IOException: HTTP Error response for SOAP request or invalid content-type.
I check the payload and test in the inbound proxy. on error.
Any hints?
Thanks a lot!
regards
Christine

Hello Christine,
I faced the same issue,
You can use the beans below to overcome the error.
And charset should be utf-8

What is the frequency response for the new iPhone 5 earbuds?

I have recently purchased a new iPhone 5 with iOS 6.0.1. I was wandering about the specifications of the new earbuds. What is the frequency response? Thank you for the information.

Apple has released 2 sets of earbuds with the iPhone 5 release. There are the earpods and also the in-ear headphones. Here are the in-ear headphones: http://store.apple.com/us/product/MA850G/B/apple-in-ear-headphones-with-remote-a nd-mic?fnode=49. The frequency response on these is 5kHz-21kHz. I was unable to find the earpods response for definite but the best response I got was 30Hz-16kHz. Hope this answers your question.

HT204387 Does the IPhone 4S support NFC technology for Bluetooth pairing?

Does the IPhone 4s support NFC technology for Bluetooth pairing.

NFC and bluetooth are not the same thing.
The iPhone (no currently existing model) does not have the hardware required for NFC.

How do I change default volume for bluetooth heads...

I've just set my e71 up with my car bluetooth system. When I make a call the volume is too low. Is there a way I can adjust the default volume on my phone for bluetooth headset calls - without affecting the normal volume?

My bluetooth set has its own volume **bleep**. Doesn't yours have one?
mgoksoy

Create Midlet for Bluetooth A2DP profile

Hello,
I'm a newbie. I would like to know if it's possible to create a midlet for bluetooth A2DP profile. If it is, please let me know where i can get information on this.
Thank you so much,
Ken

Now I'm facing the same problem with A2DP on my Nokia 6230 (original player doesn't support it) so I'm about to create my own player supporting this bluetooth protocol. I just wanted to ask you how far you've got with this.
Thx.

How-To Microsoft Keyboard Elite for Bluetooth in Solaris 10 x86 10/08

Dear all,
I have a MS keyboard elite for bluetooth install in XP and it's working fine.
But how can i configure and use this keyboard in my Solaris environment?
My Setup:
- Dell Optiplex GX270 PC.
- Solaris 10 x86 10/08
- MS keyboard elite for bluetooth
Thanks in advance for any help.
Regards,
Alisampras

Assuming you have enabled the solaris volume manager (man vold), you should be able to simply pop the pen drive in and find it mounted on /vol

No responsability for Bluetooth

Similar Messages

Maybe you are looking for