No Response From My iPad.

Hello, My iPad will NOT respond. I have tried resetting it, plugging it into the computer, charging it, EVERYTHING! And yet, it still will not do anything. I am seriously worried...
I was laying on my bed, and I was going to play COD: Zombies on my iPad. Well, there was no audio, so I decided to reset it. I have reset it before and the audio returns to the App. While I held the home and power button, a bar came up, that said something like: turn off/shutdown. I thought, "Aw, what the heck" and I slid it. The ipad turned off. I help down the buttons again to reset it, and there was no response.
It's been 4 days without my iPad. I can't stand on/off relationships;)
HELP ME PLEASE!

Thank you for that. I actually don't think that the power has to do with it. It had around 87% battery life when "it" happened.
Also, Let me tell the Full and Complete story.
I have the game COD: Zombies on my iPad. Unless I go to the home screen of the game before closing the app, the next time I start up the app, it will freeze when I start to play. There is also no audio.
I was going to play COD: Zombies, and I started up the app. The game had no audio, and I knew I had to reset it. (Resetting the iPad has always fixed the audio and freeze problems before) I held the Power and Home buttons. A little bit afterward, the red slider bar came down. I said, "Aw, what tha heck." and I slid the bar. The iPad shut off. I then attempted to reset it(again). I held the reset buttons for the required time, in order for it to reset. I set it down and answered a text message(SMS). I grabbed the iPad, and the next thing I knew, it wouldn't respond to anything at all. Thank you all for your help. I have sent my iPad away to get fixed
When it comes back, it will hopefully be fixed, and I will post the solution up on this thread. Thank you all, again, for your time.

Similar Messages

  • Why would I be receiving texts on iPad,but now cannot send response from the iPad?

    Wondering why I am receiving texts on iPad, but now cannot send response from it.

    Have you tried resetting your iPad? Press on the Home and Power buttons and hold both down until the Silver Apple appears. Once the Home screen displays, try messaging again.
    Cheers,
    GB

  • Itunes says it can't connect to my ipad because it gets and invalid response from the ipad

    Hi
    I am having trouble getting itunes on my windows pc to recognize my ipad.

    After a visit to the apple store, they were able to get through my pass code but unfortunately I found out that is was a problem with the logic board. Since Apple only wants to sell and not fix, I was able to locate an iphone repair near me that deals with logic boards and they are currently working on it right now. i should be getting it back soon. Im not sure if the problem you are experiencing is the same as i went through but it does sound like it may be also a hardware issue and would suggest searching online for an iphone repair place that can diagnose what exactly is wrong. Hope this helps.

  • I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawa

    I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol

    Hi there,
    Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
    If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
    Recovery Mode and Restore - Apple
    Let me know if this helps,
    Nathan

  • My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response

    I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response

    Hi ..
    Which OS X is installed on your Mac ?
    Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
    Make sure your Mac OS X software is up to date.
    Disconnect the iPad from your Mac.
    Open System Preferences > Software Update > Check Now
    If any updates are required, make sure to restart your Mac after the updates are installed then connect your iPad and see if iTunes recognizes it under Devices.

  • My Ipad 'Systems' shows my WiFi connection is working and all my Apps connect and interact ok but Safari says 'No Response from the Server' the same on my Mail. The WiFi works perfectly on everything else in the house. Any ideas ?

    My Ipad 'Systems' shows my WiFi connection is working and all my Apps connect and interact ok but Safari says 'No Response from the Server' the same on my Mail. The WiFi works perfectly on everything else in the house. Any ideas ?

    it was not just email it was all internet via safari but all apps including the bank account app. the laptop and pc access the same email servers which work perfectly so it is difficult to blame the servers.
    by the way it has now started to work properly at lasst after a whole day of trying to resolve this year.

  • My itunes won't connect to ipad it receives an invalid response from device

    I am trying to download an app that I had to download to my windows 7 operating system computer.  I downloaded itunes as well but when I connect my ipad to the computer itunes says it can't connect to my ipad because of an invalid response from device.  Can anyone help? 

    See this thread: https://discussions.apple.com/thread/3710650?start=0&tstart=0

  • I have a e printer and thee printer is on the same wifi net work as the iPad, when I select print from the iPad the response is no printers. I can successfully email from my iPad to the printer. How can I make my iPad recognize the printer?

    I have an e printer and the printer is on the same network as the iPad. When I attempt to print from the iPad I get a message no printers available. How can I get my iPad to recognize the e printer?

    This printer has worked for me with out fail at my house.  I am traveling in an RV and am at the mercy of the RV Wifi.  I do not have access to the router.  The printer has been recycled a number of times as well as the Ipad.  The printer is set up and has access to the wifi.  It seems to me that the Ipad and Iphone are not recognizing the connection with the e printer.  I was hoping there was some adjustment that could be made to the Ipad and Iphone.  I can email to the printer from both gadgets.  I will try to recycle the devices again.

  • I have recently updated my Ipad to Ios7 but it has now frozen and cannot do anything with it.  Still keeps time but no response from buttons.  What to do now?

    I have recently upgraded my Ipad2 but now the screen has frozen.  Still keeps track of time but no response from any buttons.  what to do know?  thanks

    Hello Kristyp280913,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Best of luck,
    Mario

  • I cannot send an email from my iPad?

    I cannot send email from my iPad all of a sudden?  I can receive them though

    I have this same issue.  Resetting does not affect the issue.  I have tried syncing it with itunes.  Turning the ipad off and restarting...
    It says user name or password is incorrect.  Strange.  It has worked for over 6 months just fine.  I reentered the info and still get the same response.Anyone have this same issue and find a solution?
    Thanks

  • Since upgrading to Yosemite on my iMac, My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad... Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..

    Since upgrading to Yosemite on my iMac: My Mail app refuses to open, Safari won't load, and I can't upload pictures from my iPad...
    Please help, any ideas very welcome. I've had my iMac since 2011, and have never had any issues to deal with before..
    Thanks

    29/11/2014 20:17:01.315 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
    29/11/2014 20:17:37.013 com.apple.backupd[616]: Finished scan
    29/11/2014 20:17:43.108 com.apple.backupd[616]: Saved event cache at
    /Volumes/Time Machine Backups/Backups.backupdb/Geoff Lambrechts’s iMac
    (2)/2014-11-29-200648.inProgress/9B453663-603F-40B8-AC21-24F05C724E15/.6162AD34- 38F8-30AB-98E0-4A22FB9D311F.eventdb
    29/11/2014 20:17:43.207 com.apple.backupd[616]: Not using file event
    preflight for Macintosh HD
    29/11/2014 20:18:01.561 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
    29/11/2014 20:18:16.288 com.apple.xpc.launchd[1]:
    (com.apple.quicklook[715]) Endpoint has been activated through legacy
    launch(3) APIs. Please switch to XPC or bootstrap_check_in():
    com.apple.quicklook
    29/11/2014 20:18:23.705 com.apple.SecurityServer[56]: Session 100013 created
    29/11/2014 20:18:32.046 mdworker[718]: code validation failed in the
    process of getting signing information: Error Domain=NSOSStatusErrorDomain
    Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
    29/11/2014 20:19:01.662 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 11 seconds. Pushing respawn out by 49 seconds.
    29/11/2014 20:19:45.458 com.apple.xpc.launchd[1]:
    (com.apple.imfoundation.IMRemoteURLConnectionAgent) The
    _DirtyJetsamMemoryLimit key is not available on this platform.
    29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
    (com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
    launch(3) APIs. Please switch to XPC or bootstrap_check_in():
    com.apple.pubsub.ipc
    29/11/2014 20:19:59.123 com.apple.xpc.launchd[1]:
    (com.apple.PubSub.Agent[725]) Endpoint has been activated through legacy
    launch(3) APIs. Please switch to XPC or bootstrap_check_in():
    com.apple.pubsub.notification
    29/11/2014 20:20:01.138 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:21:01.484 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:21:13.430 com.apple.backupd[616]: Found 4529 files (1.1 GB)
    needing backup
    29/11/2014 20:21:18.786 com.apple.backupd[616]: 2.82 GB required (including
    padding), 1.24 TB available
    29/11/2014 20:21:31.775 Console[734]: Failed to connect (_consoleX) outlet
    from (NSApplication) to (ConsoleX): missing setter or instance variable
    29/11/2014 20:21:34.230 WindowServer[162]: disable_update_timeout: UI
    updates were forcibly disabled by application "Console" for over 1.00
    seconds. Server has re-enabled them.
    29/11/2014 20:21:36.898 WindowServer[162]: common_reenable_update: UI
    updates were finally reenabled by application "Console" after 3.67 seconds
    (server forcibly re-enabled them after 1.00 seconds)
    29/11/2014 20:21:36.971 coreservicesd[83]: SFLEntryBase::ListHasChanged
    mach_msg returned 10000004d
    29/11/2014 20:22:01.817 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:23:02.170 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:24:02.547 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:25:02.168 CalendarAgent[218]:
    [Refusing to parse response
    to PROPPATCH because of content-type: .]
    29/11/2014 20:25:02.233 CalendarAgent[218]:
    [Refusing to parse response
    to PROPPATCH because of content-type: .]
    29/11/2014 20:25:02.236 CalendarAgent[218]:
    [Refusing to parse response
    to PROPPATCH because of content-type: .]
    29/11/2014 20:25:02.284 CalendarAgent[218]:
    [Refusing to parse response
    to PROPPATCH because of content-type: .]
    29/11/2014 20:25:03.059 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:25:12.674 com.apple.xpc.launchd[1]:
    (com.apple.imfoundation.IMRemoteURLConnectionAgent) The
    _DirtyJetsamMemoryLimit key is not available on this platform.
    29/11/2014 20:26:03.464 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    29/11/2014 20:27:03.841 com.apple.xpc.launchd[1]: (jp.buffalo.NASPower)
    Service only ran for 10 seconds. Pushing respawn out by 50 seconds.
    On 29 November 2014 at 19:29, Apple Support Communities Updates <

  • How do I remove an iCloud account from an iPad?

    My aunt set up my grandmother's iPad and used her iTunes/iCloud information.  My grandmother wanted to be able to buy things from the store so I created an account for her with iTunes, but I can't figure out how to remove my aunt's Apple ID from the iPad.
    I need to back up her information to the iCloud so she doesn't loose the information and apps before I can reset her iPad, but right now I can only back it up to my aunt's account which would put me right back where I am now.
    Thanks for any assistance you can give.

    Thank you so much for your fast response! We were worried that deleted my aunt's iCloud account from the iPad would delete it everywhere and she would loose her information.
    I don't have an iPad so I was flying blind.

  • My wife and I each have an iPhone 4S. With the upgrade to ios6 all text messages sent from my phone show up on hers to include responses from my text. text that she sends from her phone appear as if from mine. How do we stop it?

    My wife and I each have an iPhone 4S. Ever since the upgrade to ios6, text messages sent from my iPhone also appear on hers? All response to those text also show up on both devices. Likewise, text sent by her appear to others as having been sent from my iPhone. I have tried turning group messages off but nothing works. How can I correct this on both phones? Appreciate any help.

    Rectory wrote:
    Please can someone tell me how  I can change this so when I send a mail from my phone and from the IPad that it reads from me.
    You need a separate email address but you've already ruled out that solution.

  • How can I stream video from my Ipad to my apple tv?

    I just got the Apple TV 3rd Gen so I could stream from my IPAD to the TV in my gym in order to stream some of my workout videos. I got the Apple TV set up and connected to the television (HDMI) and to my WIFI and my Apple account etc. however, I can't get it to find my Mac Mini, Ipad or IPhone 5, all of which are set up for home sharing on the same network and all of which just updated the other day. I can't find the Airplay on my devices other than the Apple TV. When I try to connect using Bluetooth, my Mac Mini sees the Apple TV and attempts to pair but the Apple TV just spins and searches contionuosly. My ITunes syncs correctly with my phone and Mac Mini and I can't find any issues there.
    Any ideas how to get this working?

    Thank you. I wasn't able to locate the symbol. I have read some other community responses to others and finally figured out how to access it. Hopefully it will solve my problem.nthank you for your assistance...

Maybe you are looking for

  • How can I see my 2 ITunes account on my apple TV?

    Hello, I have two ITunes accounts (for some reason that I can't remember at one point it was modified) and I have purchases under my A account and purchases under my B account (both under the same credit card information and email, just different ID)

  • How to ignore SDO_GEOMETRY but capture with CDC

    Hi, Is it possible to set up a table with an SDO_GEOMETRY for CDC, ignoring the SDO_GEOMETRY columns but capturing the remaining data? Im using ODI to deploy the CDC and underlying apply + capture processes, I've tried removing the column in question

  • How does the SignatureClear() function work?

    Hello everyone: I have read Javascript for Acrobat API Reference (8.0) and I'm still wondering how SignatureClear() works. Is it possible to clear a signature field with this? How? It is said that you can not work with it in Adobe Reader... but I hav

  • Insert update

    dear friends, i'm trying to insert some records in my SQL SERVER 2000 db. but the problem with that is, when i retrieve these record then i find that some additional spaces has been appended with the data that i provided. total length of the column v

  • SYBase ADAPTIVE SERVER 11 TO ORACLE 9i

    Hi, my Oracle server is on HP-UX and i want to migrate from SYBASE adaptive server 11 to Oracle9i which is also on HP-UX. Please help me as there is no Migration Workbench on HP-UX....