No response when running Query from client

Hey.
I have a problem, I have installed Oracle9i on a Red Hat 9 Professional server, I have made my database, and have also put in some data, now here is the problem.
When i connect and run a query from my server, then it runs fine and fast, If i run the same query from min Winxp workstation, then my SQLPlus just hangs.
I can from my workstation ping and tnsping my server without any problems. and as far as i can see my tnsnames og listener is working fine.
hope u can help
/regards
Jonas Skjoldan

We did have a bug in older versions of smartview where it was not possible to deinstall it. Smartview was removed but any attempt to install a new version failed. This was because Smartview creates a Registry entry in:
HKEY_CURRENT_USER\Software\Microsoft\Installer
and adds the key
C:\DOCUME~1\USERNAME\LOCALS~1\Temp\_is3EA\
which then prevents any newer version of SmartView to be installed
I looked on my machine and the is3EA file does not exist, however there is an installer file called isA.exe
The registry entries for smartview are found under HKEY_CURRENT_USER\Software\Hyperion Solutions\Hyperion Smartview - maybe you could try deleting these entries? --> solution works.
Edited by: user9378541 on 27-sep-2010 2:45

Similar Messages

  • Results table difference when running query from Alert compared to Query Manager

    Hello,
    I have following query - Aim is to create alert to tell employee which customers to make visit to in next 4 weeks
    SELECT DISTINCT T1.CardName, T1.U_VisitDue, T1.U_VisitReason, T1.U_Priority, T1.U_Region as 'Area', T1.U_VNotes
    FROM dbo.OCRD T1
    WHERE DateDiff(d,T1.U_VisitDue, GETDATE()) <29
    Group BY T1.CardName, T1.U_VNotes, T1.U_VisitDue, T1.U_VisitReason, T1.U_Priority, T1.U_Region
    FOR BROWSE
    My problem is that when I run query through alert the field U_VNotes is displayed differently.
    Running the query from Query Manager the contents of this field appear in one field of the result table.
    Running the query via Alery the content of this field is split into several fields in results table according to 'new line' in field entry.
    This makes the results table from the Query less 'user-friendly' because if you want to sort the table by 'Date' column for example it makes a mess of the table because of the extra rows.
    I want results table to look like top version in picture below ... but i want to run from alert.
    Is this possible?
    How can I achieve it?
    Thanks for any assistance
    Regards, Karen

    Hi
    check this support note:1774628 The SQL SELECT DISTINCT Statement does not work in ALERTS
    Kind regards
    Agustín Marcos Cividanes

  • Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

    Hi,
    starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
    a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
    We figured out a workaround though: The applications run fine when launching from a FQDN share (like
    \\share.domain.Company.com) and only cause problems when running from
    \\share directly. They have worked fine for years without FQDN though.
    Any ideas?
    Error Details (the Kind of error differs greatly):
    # 1 #
    Log Name: Application
    Source: Application Error
    Date: ...
    Event ID: 1005
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: vmDEV
    Description:
    Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
    because of this error.
    Program: XYZ
    File:
    The error value is listed in the Additional Data section.
    User Action
    1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
    2. If the file still cannot be accessed and
    - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
    - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
    3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
    4. If the problem persists, restore the file from a backup copy.
    5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
    Additional data
    Error value: C000020C [ also seen with code C00000C4]
    #2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
    Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x00026549
    ID des fehlerhaften Prozesses: 0x13ac
    Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
    Pfad der fehlerhaften Anwendung: \\share\application.exe
    Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
    Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    Anwendung: XYZ.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
    Stapel:
    # 3 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
       bei System.Windows.Forms.Control.NotifyEnter()
       bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
    # 4 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.IO.UnmanagedMemoryStream.ReadByte()
       bei System.IO.BinaryReader.ReadByte()
       bei System.IO.BinaryReader.Read7BitEncodedInt()
       bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
       bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
       bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
    # 5 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.Reflection.RuntimeParameterInfo.get_Name()
       bei System.Diagnostics.StackTrace.ToString(TraceFormat)
       bei System.Environment.GetStackTrace(System.Exception, Boolean)
       bei System.Exception.GetStackTrace(Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString()
    # 6 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
    Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
    Ausnahmecode: 0xe0434352
    Fehleroffset: 0x00012f71
    ID des fehlerhaften Prozesses: 0xa68
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
    Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
    Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    # 7 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
    Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x0006db27
    ID des fehlerhaften Prozesses: 0x18dc
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
    Pfad der fehlerhaften Anwendung: \\share\xyz.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
    Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

    Hi,
    >>The applications run fine when launching from a FQDN share
    It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
    the share correctly.
    If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to run expdp from client ?

    Hi All,
    I tried searching google and forums for my issue but to no avail > How to run expdp from client side ....like in my laptop.
    Because currently our PROD database server has no space for expdp dump file. So I want it directed to my laptop which has an extenal USB of 1TB harddisk...via client EXPDP
    import data using impdp command
    Posted on: 08-May-2012 11:36, by user: 841731 -- Relevance: 53% -- Show all results within this thread
    below command is correct or not? if it is not correct could you please send me the correct command. impdp user/[email protected] schemas=sourceschemaname remap_schema=sourceschemaname:destinationschemaname ...
    System generated Index names different on target database after expdp/impdp
    Posted on: 30-May-2012 11:58, by user: 895124 -- Relevance: 43% -- Show all results within this thread
    After performing expdp/impdp to move data from one database (A) to another (B), the system name generated indexes has different ...
    [ETL] TTS vs expdp/impdp vs ctas (dblink
    Posted on: 08-May-2012 21:10, by user: 869578 -- Relevance: 39% -- Show all results within this thread
    (table : 500 giga, index : 500 giga), how much faster is TTS (transportable tablespace) over expdp/impdp, and over ctas (dblink) ? As you know, the speed of etl depends on the hardware capacity. (io ...
    Oracle Client
    Posted on: 21-Jun-2012 22:47, by user: Sh**** -- Relevance: 32% -- Show all results within this thread
    Hi Guys, Please can you guys elaborate the difference between Oracle Client and Oracle Instant Client. Also, please can you advise from where I can download the Oracle normal ...
    Oracle 10g Client
    Posted on: 05-Jun-2012 10:11, by user: dzm -- Relevance: 26% -- Show all results within this thread
    to search at oracle site and this forum, but i wasn't able to find a link to download the oracle 10g client. I really need especificaly the 10g version. Anybody know the link or another way to download ...
    9i client to access 11g database
    Posted on: 22-Jun-2012 07:31, by user: kkrm333 -- Relevance: 24% -- Show all results within this thread
    Hi, Can i access a 11g database using 9i client? Thanks,
    SQLplus in Oracle Client
    Posted on: 14-Jun-2012 00:36, by user: Tim B. -- Relevance: 24% -- Show all results within this thread
    Hi, I tried to install an 11g oracle client in linux. As I've compared the files with the files when you install using the oracle instant ...
    Re: Information on Oracle Client 11202-1.1.4-6
    Posted on: 05-Jun-2012 03:33, by user: 898763 -- Relevance: 23% -- Show all results within this thread
    Actually thats the client requirement
    Analysing the performance of a single client
    Posted on: 28-Mar-2012 02:05, by user: 880172 -- Relevance: 23% -- Show all results within this thread
    timeouts even on some of the simplest queries. I want to try and get some data about how just this one client is performing and what it’s doing, but everything Google has thrown up so far is orientated around ...
    to make client connection as sys
    Posted on: 12-Jun-2012 22:04, by user: user11221081 -- Relevance: 23% -- Show all results within this thread
    Dear gurus can i connect to my server from my client machine with sysdba without giving sys password i have connected in different ways as [email protected] ...Thanks a lot.

    Though you can initiate the binary from your client side but for the file creation, there is no other way but to store it on the server side. So your best bet would be to get some space free on the server side of yours.
    Aman....

  • Unable to run query from BEx query designer

    Hello,
    I am connecting remotely to clients environment. I am not able to run query from Bex query designer. System generates IE window with URL
    http://server.com:50300/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCOPCM02_Q017&VARIABLE_SCREEN=X&DUMMY=9
    but query result isnt shown.
    Internet Explorer cannot display the webpage.
    What kind of setting do I need to change to get query working?
    thanks

    Hi Comandante,
    If you are not able to Execute the Query using Query designer, you can also execute the query using RRMX  or RSRT transaction for now until the issue with the query designer is solved ..
    Hope it helps!
    Regards,
    Pavan

  • Duplicate emails in Junk E-Mail folder when running multiple Outlook clients

    Has anyone experienced problems when running multiple Outlook clients - and a junk e-mail is received?
    We are seeing that when a user is running 3 Outlook clients (2007/2010) - and they received a junk email - Outlook seems to take that email and movie to the folder. However, with 3 clients, there end up being 3 copies of the email.
    Mail clients are Outlook 2007/2010 running in native Exchange mode (no IMAP, POP, etc). Server is Exchange 2010 SP1, RU2.
    Antivirus is McAfee VirusScan Enterprise 8.7.0i  - but we believe that the problem occurs even with it disabled.

    hi, we also faced the same issue.
    we had a common mailbox that is accessed from different workstations, and the outlook profile is set to cached mode. when a junk mail is received, it will create duplicates according to the number of outlook clients, as what jbuschmann mentioned. Is this
    a known issue in outlook 2010? Understand there's a fix for outlook 2003 for a similar issue, is there a similar fix for outlook 2010? thanks!
    http://support.microsoft.com/kb/832358

  • ORA-27092 Error while executing any query from client

    Hello
    I am getting following error while executing any query from client remotly.
    [email protected]_OAT.ABCD > select userid from dual;
    select userid from dual
    ERROR at line 1:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01116: error in opening database file 1
    ORA-01110: data file 1: '/u01/prod/system/system01.dbf'
    ORA-27092: size of file exceeds file size limit of the process
    Additional information: 131071
    Additional information: 286209
    But while local connection,its working.

    hi,
    ulimit command- Limit user resources
    su - oracle
    ulimit -n (this command will show you the current value for ulimit the default value is 1024)
    to increase its value:---
    ulimit -n <some value> ( this command will change value for current session only)
    example
    ulimit -n 101062
    once done check the value as:--
    ulimit -n( for verification)
    search in google for more explanation or revert back to me for any suggestions.... :)
    Edited by: varun4dba on Jan 31, 2011 4:09 PM

  • Error when run page from jdev10.1.3.3

    Hi,
    Im getting the following error when running pages from jdev 10.1.3.3. I have loaded all the frequired files from the server(.class and .xml).please help..
    Thanks.
    ## Detail 0 ##
    java.lang.NullPointerException
         at java.util.Hashtable.put(Hashtable.java:396)
         at oracle.apps.fnd.framework.webui.OAPageContextImpl.putSessionValue(Unknown Source)
         at oracle.apps.pos.supplier.webui.ByrAddCntctCO.processRequest(ByrAddCntctCO.java:97)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(Unknown Source)

    The OA Framework forum is available at the following URL:
    OA Framework
    Regards,
    Didier.

  • Message format exception when running TestProducer from EDM

    Hi,
              I'm getting weblogic.jms.common.MessageFormatException: Illegal property name, 'error-contex
              t' error when running TestProducer from EDM. Does anyone know how i can change error-context to a string without - ? Or any suggestion to make it work ?
              Thanks,
              Jessie
              

    Hi Jessie,
              As per the JMS specification, property names must be a legal identifier,
              similar to java variable names. I think the reason for this is
              that property names are used in selectors, and the parser would have
              no clue what do with an expression like:
              error-context > 10
              Tom
              Jessie Yau wrote:
              > Hi,
              > I'm getting weblogic.jms.common.MessageFormatException: Illegal property name, 'error-contex
              > t' error when running TestProducer from EDM. Does anyone know how i can change error-context to a string without - ? Or any suggestion to make it work ?
              >
              > Thanks,
              > Jessie
              

  • Running Reports from Client Machines in which the reports are residing on t

    Hi Folks,
    I'm using Developer 6i with Oracle 9i. I can run forms from the clients so that the FMX file is residing on a shared drive on the server, but when I try to run reports which also reside on the shared drive of server, I get error that unable to find the report. Do I need to install report server on the client machine/server or am I missing some basic step here?
    TIA
    Hassan

    Hi,
    There's a whitepaper on the topic of Forms/Reports integration for the web called "Oracle9iAS Forms Services and Reports Services Integration". This should give you the information you are seeking.
    regards,
    Stewart

  • Oracle Report Font problem when run report from oracle EBS R12

    Dear All
    I have developed one Report in ORACLE REPORT BUILDER in windows environment. I see the output of that report, its ok, I deployed it on the EBS R12 which is on Linux environment, when i see the output, its fonts totally change and due to change in fonts, output not same as like in previous stage. When i print from dot matrix Printer then sometime its shrink the character and sometime break the output..
    Kindly help me in this regard, because this problem i am facing from last few days.
    i am waiting for your quick response.
    Thanks in advance....
    Regards,
    Nawaz
    Edited by: Haq Nawaz on Nov 5, 2012 11:45 AM

    Thank you very much for your reply
    I have changed the fonts in the report, but when i run it from the EBS its has the same problem. from the EBS output font look like as (COURIER) rather than CALIBRI WESTERN.
    tell me what i have to change anything.

  • Slow response time on query from one schema to another

    I've got two separate databases (one test, the other production). The schemas are pretty much identical and contain the same data. This particular query is executed from .NET (SQL text command, not SP) and takes about 3 seconds when performed against my test db, but takes anywhere from 45 seconds to 5 minutes on the production system. I've exceuted the same statement using Aquadata studio and get the same response times. I didn't build the queries or the schemas, nor do I manage the database servers. But I am responsible for making this work now. These queries have been working in the past, but recently have been changed. I am able to speed this one up with some sql changes, but the others I'm not sure about. I've checked and production db has indexes on the fields I'm querying while the test db does not. I would expect test to be slower, but it's not. Any ideas that I could try. On Monday I'll ask our server admins to check out the server end of it, and see if they need to reboot or something. In the meantime, I'm going to work to revamp the SQL.
    Any ideas you can provide would be much appreciated.
    Sincerely,
    Zam

    when your query takes long...
    When your query takes too long ...

  • ODBC error when running query on WEBI XI R2

    Hi all,
    I have a newly installed XIR2 on Win 2003 (32-bit), I created a simple Universe pointing to MSSQL 2005. I encountered the error below when running a query from WEBI:
    Database Error: [Microsoft] [ODBC Driver Manager] Data source name not found and no default driver specified. Error: WIS 10901
    Any ideas? Thanks!
    Cheers,
    Arms

    Hi Armstrong,
    If you are using an ODBC connection, make sure the connection is defined exactly the same on the server as it defined on your computer... With SQL you can try to create an OLE DB connection, then when you export the universe, the connection will still work... ODBC connections need to be created on all machines if you plan to use the desktop tools.
    Hope this helps
    Jacques

  • Can not Run Application from Client PC.

    Hi,
    I have a pc running on WinXP called "PC1". I have installed Oracle9i Database, Developer Suite 10g and services. I can run my application smoothly on "PC1".
    My problem is that i can not run my application from client pc running on WinXP called "PC2". I have installed JINIT.exe on "PC2". I started OC4J also on "PC2". IE shows "Page can not be displayed" message.
    What settings i have to do to run my application on Client i.e. "PC2".
    Waiting for any kind of help.
    Thanks.

    Hi all,
    Thanks for the reply.
    I have already install same JINI.exe on Client "PC2" which is on Server "PC1". And the version of the IE and JINI are same on Server "PC1" and Client "PC2".
    I start OC4J on Server.
    Should i make some settings on JINI Control Panel on Client ? Like Proxies.
    I have enable all check box on "Basic" Tab of JINI.
    Further, On client, the check Box of "Show Java Console" is also on, but when i try to connect my application from IE, the Java console does not appear.
    I would like to inform u that, when i start additional Proxy driver like Analog proxy on my server and then i give that proxy address and port in Client IE connection LAN setting, i am able to run my application from that Client.
    But i think that is not the solution.
    Waiting for reply.

  • RFC when running query

    Do any of the experts know why when users run queries I see in SM50 the session is stopped for RFC. It then continues.
    What is it doing  a RFC call for when running a query?
    Thanks

    Hi,
    The BW front-end system uses RFC, to create the link to the the BW back end.So ,When you execute the query , first of all it call the RFC to get the result set from Underlying tables.
    With rgds,
    Anil Kumar Sharma .P

Maybe you are looking for

  • I had my phone stolen,and have just received my replacement.. how do i make my photos appear on my new iphone?

    i have never been any good with this icloud business, i can see the iphone backed up on my new handset but how do i restore it so that these pictures appear on my new phone? x

  • PRINTER SELECTION FOR AN iBOOK G4??

    Hello-I have recently upgraded to an iBook G4 from an 8 year old iMac rev A. Now I need to get a new printer to use, as my old one, an Epson Stylus 740,won't work with the G4. Does anyone have any advice as to what brand I should get? I just need a p

  • Registering Adobe Photoshop Album Starter 3.2

    I have completly filled out the registration form, but when I click on "Resgister" I get three consecutive pop-up message boxes with the last one saying, "internet send failed" and this is as far as I can get. I have not been able to get the "unlock

  • How To Find Out thick line in adobe reader ?

    i dont recognize in line wigts in adobe reader . if there any shortcuts avilable for finding linewhiegts in adobe reader if possible  any one help me.

  • IPad or iPad Mini for Uni

    I have been using a MacBook Pro at uni for the past 2 years and finding it annoying to bring everyday so I'm planning on getting an iPad but the problem is I am tossing between the regular iPad with Retina Display or the iPad mini and if the iPad is