No response when trying to export with fcpx

Just updated to Mavericks. Everything worked fine before then.
So I finished my project , go to export, and no response. When I try and export to vimeo or you tube I get this error -
"The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)"
Its not a camera import issue. I actually made another project with clips that I know to have exported, with no problem. And again, there is no response when I export project.
And I can't uninstall fcpx because I have clips saved to the program. And hard drive is dead.
Thank you for your help!

CClips aren't inside the application.
What version are you using? older versions don't work with 10.9.

Similar Messages

Share tab is greyed out when trying to export in FCPX - cannot export - I would like a real answer in plain english! Thank you!

The share tab is greyed out when trying to export from Final Cut Pro X
Please help with a REAL answer in plain English.
Thank you!

Thank you Tom!
I checked every clip -
Trashed preferences too.
Finally, I took your advice and backed-up my events and projects.
Trashed Final Cut Pro X
Downloaded a new copy from FCPX from the app store (from my previous purchases)
Restarted FCPX
Opened my event
Moved to the timeline - and now!
The SHARE tab works!
Every aspect of FCPX is working faster as well.
Go figure?
Thanks again!
Allan - olvblock

Error message ''Disk Full' when trying to export with CS6, works fine in 5.5

I get an error message when I try to export media in Premiere CS6 that I don't have in CS5.5
I use export media for a AVCHD 60fps sequence with a few photoshop images on top of the main track. In the export settings I choose ''match sequence settings'' which gives me a .mpeg I- frame, 1920 x 1080 P, 60fps, quality 50, and a I tick the ''use maximum render quality'' check box at the bottom.
It used to work fine but now I get a message: Disk Full where there is 1.5 TB free on the disk?
I have the exact same sequence made in Premiere Pro CS 5.5 and it exports fine.
It started to act weird after I used the queue for the first time and it went to the CS6 encoder.
Since I used that once and it gave me that message for the first time, even when I try to do the same thing directly in Premiere CS6 , I always get the same error message.
Question 2, is there a place to change the settings from 50 to 100 for the quality of this export profile?
By the way I can export with other profiles without problems but this setting is the only one that I've seen that lets me keep my 60 frames per second in the export
process. (Example: I can export this sequence in the H.264, 1920 x 1080, 30fps, high quality preset, using the maximum render quality in CS6)

Hi Guys,
Thanks for the input but if you read my message correctly and until the end I already can export to other settings and I want an answer to this problem. There's no logical explanation to why this suddenly wouldn't work with the same sequence that it used to do fine with and that CS 5.5 handles fine.
As I said earlier this is the only setting that lets me export my sequence with the 60 fps, that I know of, for further and easier manipulation. As my main camera provides me with these 60 fps I'd really like to be able to have them left in that transition phase and, no, I'm not gonna give up until I know, really, what's going on and solve that problem. If this is a bug it needs to be fixed, if not I want to know what's happening.
Also there's no answer to my question 2: Question 2, is there a place to change the settings from 50 to 100 for the quality of this export profile?
So for you experts out there the question is still hanging.

File disappears when trying to export with "share" in FCP X...

I have FCP 10.1.3 running on a macbook pro running 10.9.4; attached to an external 8 tb drive with over 6 tb of free space.
When I try to export a project using "share," the file will start to save to my destination, but then just disappear at exactly the 50% mark. I've shared previous versions of the same file with no problem, and I have enough space to hold the file. I've tried restarting the app and the computer; I tried saving to an external drive and to my hard drive; the file will simply disappear from either destination at 50%.

This is weird. Before we proceed with other possible tests, did you try this with just one project, or with other as well? If just this one, create a new library, a new small test project and export that. Does it work? If it does, then the problem may me in the specific project or library.
A few other ideas:
1) Delete application preferences (almost always the first thing to try, as corrupt preferences have been known to cause strange malfunctions). Hold down the command and option keys while starting the application and confirm the deletion of preferences when asked.
Note: deleting preferences does not delete the application nor your media and libraries
2) Open the Console application (it is in /Applications/Utilities) and look for messages that appear around the time the export fails.
3) Try running the program from a pristine new user account and see if it exports correctly a small project there

Premiere crashes when trying to export with Media Encoder via Dynamic-Link

I work with clips from a networkdrive and I think the problems relates to this fact. My User-Account is an Admin-Account. I don't have any other Accounts. I also set Premiere, Adobe Media Encoder and every dynaimclinkmanager and -mediasever I could find to "run as administrator". Importing Clips in the timeline and work with them works well.
Setting Adobe Media Encoder as "run as admin" solved the issue in the past, that it sometimes didn't render clips out sent from premiere via dynmiclink saying that it couldn't find specific files (which were instances of the actual premiere-project in the tempfolder), thogh these files were actually there.
Thanks for help!

I can only recommend having all files stored locally on internal drives. Use network drives only for backup and archiving.

Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

Read this
http://support.apple.com/kb/ts1583

Iphoto stopped working when trying to export to facebook. iphoto is froze open with flip down for exporting. Neither will respond. Any ideas on how to fix this?

iphoto stopped working when trying to export pictures to facebook - iphoto page and export flip down froze open - cannot do anything with them - any idea what's wrong or what I can do to fix this?

Force Quit iPhoto (Use Force Quit under the Apple Symbol in the upper left of this page). If you continue to have problems please re-post in the iPhoto's forum, it's located at:
https://discussions.apple.com/community/ilife/iphoto

Unknown Error when trying to export movie with certain PNG files in Adobe Premiere

Hi!
I've made an animation video in Premiere Pro CC2014 combining apple pro-res live action with png animation. When trying to export, some parts of the video are no problem, and some (seemingly random) png files Adobe Premiere just doesn't like?? I don't understand why it will export some and not others?
Help??!
Thanks so much!!

Error compiling movie can be anything from gap to bad clip, transition, effect, nest, you name it.
Export from AME with preview open and watch were in the timeline it goes wrong.
That is the place to fix it.

IMovie error when trying to export-file open with write privilege

When trying to export an iMovie, after about two hours, I got a message - error - a file is open with write privilege. Any idea what might be causing this error or what the error message means?

Ask the users in the iMovie forum: https://discussions.apple.com/community/ilife/imovie?categoryID=141

Premiere Pro CC crashes when trying to Export Media

I really hope someone can help me with this.
I bought a brand new Dell XPS 15 because I will be studying multimedia production next year. Next week I'm registering for the art school and I'll be able to buy a CC student license. I installed the Creative Cloud Trial Version because I couldn't wait to check out the new features in Photoshop and Premiere Pro. However after working on a Premiere Pro project for several hours, the program crashed when trying the Export>Media function.
As soon as I hit Export>Media in every project I make in Premiere Pro, the following dialog box pops up: "Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.". I'm not able to export my project, not even by using the keyboard shortcut Ctrl+M.
I already tried reinstalling Creative Cloud, without any luck. Any idea what could be causing this? I really need this fixed before school starts, so help is much appreciated.
Here are my system specs:
- Intel Core i7-4712HQ processor
- 16GB DDR3L RAM
- Nvidia GeForce GT750M 2GB
- 500GB SSD
Thanks to everyone willing to take a look at my problem.

Hi John,
Thanks for your response. I checked all those links but I'm afraid none of those solves my problem. My GPU drivers are up to date and changing BIOS settings to fixed to disable Nvidia Optimus doesn't work as well.
I checked Windows Event Viewer and the error shows as following:
EventData
Adobe Premiere Pro.exe
8.0.0.169
536f4f89
MSVCR110.dll
11.0.51106.1
5098826e
c0000409
00000000000740c4
21b4
01cf994108252059
C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere Pro.exe
C:\Windows\SYSTEM32\MSVCR110.dll
a2ad4021-0534-11e4-8260-e82aea8638f9

Error message when trying to export pdf to excel

i keep getting an error message when trying to export a pdf to excel

Hi ,
Could you please elaborate more about the issue ?What exactly are you trying to perform and how are you trying to do the same?
Are you using Adobe Reader or Adobe Acrobat to export PDF to excel?
What software version are you using?
Also ,could you please tell what is that error message and it would be wonderful if you could share the screenshot of the error message with us so that we can assist you accordingly .
I would also like to know what OS do you work on ?
Is it happening with all kinds of PDF you are trying to convert or any specific one?
Please update me with above mentioned details so that we can assist you further .
Regards
Sukrit Dhingra

Getting an error message when trying to export from the Lightroom 5.7.1

hi
i'm getting an error message when trying to export the images from the Lightroom, all the images are on the external drive
i'm using windows 7 with 4gb of ram core i5
"AN INTERNAL ERROR HAS OCCURRED WIN32 API ERROR2 ("THE SYSTEM CANNOT FIND THE FILE SPECIFIED.")WHEN CALLING SHELLEXECUTEXW FROM AGWORKSPACE.SHELLEXECUTE"

i found the answer my myself
post processing was blank that was causing it to happen

I have created a DVD via iMovie and burned several copies. When played the DVD's will stop and display a message SKIPPING DAMAGED Part. It is not the DVD. When trying to export the project, I get an error message.

I have created a DVD via iMovie and burned several copies. It is a large file. When played the some DVD's will stop and display a message SKIPPING DAMAGED Part but will not resume. Some work fine. It is not the DVD. I have burned from several batches. When trying to export the project, I get an error message with the following message: The project could not be prepared for publishing because an error occured (-108).

TV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!

Lightroom 2.6 freezes when trying to export images

I have been using LR successfully on a Windows XP machine for several years and using version 2.6 for the past several weeks . As of a few days ago, LR would freeze when trying to export images. The export functions of 'Export with Previous' and 'Export with Preset' seem to work without crashing LR but most of my exporting needs me the ability to adjust the export settings. Any advise?

I would guess LR only goes by drive-letter so if you've kept that the same it should be ok. Look for something else.
I would look in your Lightroom Preferences files to see if there is any drive letter that no longer exists.
On Vista/Win7 my LR prefs file is in:
C:\Users\[user name]\AppData\Roaming\Adobe\Lightroom\Preferences
XP has something similar under C:\Documents and Settings\Local Settings (or Application Data)
If you open that file in a simple text-editor like NotePad then about halfway down (at least in mine) there are some export-related things that include the drive-letter and path on your hard-drive to various folders. You can find it by searching for:
AgMRUPopupList_AgExport_destinationFolderPathPrefix
Look through those and see if any of the drive-letters or paths are wrong and look around for other paths. The paths will contain
or
instead of \ because the low-level language routines LR is written with need it that way so if you change anything, keep the number of slashes consistent.
It could very well be that there is nothing wrong with any of the paths, so another approach would be to rename or move your preferences file to see if LR will recreate it with defaults for everything, and see if that clears up the lockups.
Whether you decided to edit or rename your preferences file, please make a backup copy so you can put it back in case something even worse happens and you need it back.

When trying to export to Excel the tool hangs for 10-15 min. (1.5.1.54.40)

When trying to export a result set after a query the tool hangs for 10-15 minutes. This is regardless of the export fileformat; xls, html etc. It seems like the problem is related to the complexity of the query: Low-cost query=export OK, High-cost query=Export Not OK (even though the number of returned records is low)
Exporting to any fileformat from a tables data-tab is OK, the problem occurs only in combination with a query that has been ran in a Worksheet.
Will be greatful for any hint!
SQL Developer: 1.5.1.54.40
Java: 1.5.0_06
Client OS: XP Prof 5.1.2600 SP 3
Database: 9.2.0.5.0

Hi,
If you are using SQL Dev 1.5.1, you can include the column header by using
CTRL + Shift + C (instead of CTRL + C), and paste it to Excel.
I got this info from other forum, sorry I couldn't find which one.
Don't use the Edit - Copy Path menu, even it uses the same shortcut.
Regards,
Buntoro

No response when trying to export with fcpx

Similar Messages

Maybe you are looking for