No RFC authorization for function group AGS_TAO_REQUEST_MGMT_FGR

Hi,
I'm trying to build a connection between SAP TAO  2.0 and SolMan. I recevied following error message: for one of my user:
2010-12-21 16:28:24:577 : ERROR   : SAPTAO.exe : Thread04 (SelfCheckWorker) : SAP.TAO.Common.Rfc.RequestListener.TaoCommonReqListProxy : SearchSoftwareComponents(): an error occured: SAP.TAO.Common.Rfc.SapAgentAgentException: CallBackend(RfcRequest): a call to the backend system failed: SAPAGENT_RFC_CALL_DETAILS(RFC_SYS_EXCEPTION) ---> SAP.TAO.Common.Rfc.SapAgentAgentException: SAPAGENT_RFC_CALL_DETAILS(RFC_SYS_EXCEPTION) ---> System.Exception: User GCRIBB has no RFC authorization for function group AGS_TAO_REQUEST_MGMT_FGR
Please help. Thanks in advance.
Subodh

Hello ,
You have mentioned you have received one of your user? rest of the users is it working?
Looks like i also received this error message when i did not instlal my ST-400 ..TAO Agent..i saw the  same error message in the log.
Did you follow the this note to install SAP TAO - agent  properly (OSS note - 1368112) ?
When you did self check are you getting any warning messages?
1440074 - Check this note also for RFC authorizations
Good luck.
Ram

Similar Messages

  • IDOC Scenario - User  has no RFC authorization for function group EDIN

    Hi all,
    I'm trying to configure an IDOC scenario from ECC to XI.
    RFC's, ports and destinations already configured. On WE19 I'm creating an IDOC for testing the scenario. The IDOC is sent successfully, and it stops on TRFC Monitor with error "User PIRFCUSER has no RFC authorization for function group EDIN." .
    Some of you knows what authorization is needed? Basis team said the roles are the same at DEV environment, and there this scenario works fine.
    Thanks for your help.
    regards.
    Roberti

    Hi,
    Check with PIRFCUSER user , that is having the right authorization or not ..
    And make sure that this user is present in the system & it should  not locked.
    to check that user is present or not-----goto su01 of the system & check
    Regards
    Seshagiri

  • No RFC authorization for function group HRXSS_SER

    Hi,
       after implementing portal (EP 7.0), when the end user tries to access the ESS functionalities, the following error occurs,
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: ComponentUsage(FPMConfigurationUsage): Active component must exist when getting interface controller. (Hint: Have you forgotten to create it with createComponent()? Should the lifecycle control of the component usage be "createOnDemand"?
    in default trace, i found the following error,
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: User AG1780 has no RFC authorization for function group HRXSS_SER
    when i give SAP_ALL access to this user, then everything is working fine, but i cant give so.
    help me regarding this...

    Hi Ajay,
    simply do what the exception tells you: provide RFC authorization in the backend for function group HRXSS_SER to user AG1780.
    Cheers, Anja

  • No RFC authorization for function group RFC2

    When I am trying to import RFCs/IDOCs from ECC to XI in the integration repository, I am getting this error:
    User has no RFC authorization for function group RFC2.
    Any input is appreciated.
    Thanks,
    tnv

    Hi tnv,
    I guess you have to use an authorization object S_RFC with parameters.. In your case, you would need to set
    RFC_TYPE=FUGR
    RFC_NAME=RFC2
    See this link
    http://help.sap.com/saphelp_nw04/helpdata/en/6b/af429b12e9214d9a2d6cba921b162f/frameset.htm
    Hope this solves ur problem!
    cheers
    Prashanth
    P.S Please mark helpful answers

  • SMD_RFC has no RFC authorization for function group SPF.

    Hi,
    http://pw200-3.fcc.XXXXXXX.com:50000/smd  ->Diagnostics Setup ->Setup Wizard - Step 1  receives an error message like . .
    The value of profile parameter login/accept_sso2_ticket could not be checked
    Attached the below error message
    << >>
      Sat Nov 08 12:19:07 2008 SSO The value of profile parameter login/accept_sso2_ticket could not be checked
    Step SSO Details
    Found SID for SSO ACL entry : PW3
    Found login.ticket_client for SSO ACL entry : 000
    The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
    The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (619 bytes)
    SSO ticket certificate of PW3 was imported in ABAP PSE of localhost (client 001) : remove_certificate_failed
    The ticket certificate is already in ABAP PSE, but could not be updated. You might need to check whether the certificate is up to date in STRUSTSSO2
    The value of profile parameter login/accept_sso2_ticket could not be checked
    !! Exception : An exception occured during the execution of this function 'PFL_GET_PROFILE_LIST'.(cause=com.sap.mw.jco.JCO$Exception User SMD_RFC has no RFC authorization for function group SPFL.)
    Thanks
    Thirumal
    Edited by: Thiru Thirumal on Nov 8, 2008 4:33 AM
    Edited by: Thiru Thirumal on Nov 10, 2008 5:49 AM

    Hi All,
    Check the authorizations of user SMD_RFC as described in[ this guide|https://websmp106.sap-ag.de/~sapdownload/011000358700000178012009E/RCA_User_Adminguide_SP18.pdf], refer to section 2.3.3 [SOLMAN.ABAP.RFCCOM]: Internal RFC System User.
    Also check notes  1170859 and  1371222.
    1170859 - SMD_RFC: running RCA without SAP_ALL profile
    1371222 - Additonal authorizations for E2E RCA EhP1 SP20
    I hope this help.
    BR,
    Allam

  • UWL  : User J2EE_ADMIN has no RFC authorization for function group SYST

    Dear All,
    When I am trying to register the system in universal Worklist Administration, It gives the following error,
    System <>: Fri Jul 11 18:58:11 IST 2008
    (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorExc  eption:Fri Jul 11 18:58:11 IST 2008
    (Connector) :com.sap.mw.jco.JCO$Exception:User J2EE_ADMIN has no RFC authorization for function group SYST.
       I have tried by giving the role SAP_ALL to J2EE_ADMIN , then also i am getting the same error. Can anybody  through some light on this....
    Helpful tips will be rewarded...
    Sanoj

    Sanoj,
    check these threads
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5489621
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5267551
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5636365
    reward points if helpful

  • QM-IDI : User QMIDI has no RFC authorization for function group QIRF

    Hi,
    I am in the process of trying to connect from Labware LIMS to SAP ECC 6, specifically the quality module. The aim is to use Labware to connect to SAP via the QM-IDI interface to
    1) Download inspection lots from SAP
    2) Upload usage decisions and inspection lot results to SAP.
    Initially I specified an account on SAP of the type 'Communications Data', however any time I tried to connect to SAP from LIMS via the interface with this account it gives an <i>'Incorrect Username/Password'</i> error in the trace logs. I then changed the account to a dialog user, which seems to be partially more successful, however the trace logs captures the following error 'User QMIDI has no RFC authorization for function group QIRF' when I try to connect from LIMS to SAP via the QM-IDI interface after changing the user to type dialog.
    I would appreciate any guidance on how to resolve this issue.
    Regards.

    i got stuck on configuring idi. plz guide me. bond_chaitu at yahoo dot com

  • UWL: User MSSNO1 has No rfc authorization for function group SWK1

    Dear all,
    We have just recently upgrade our support pack and the UWL in the portal is not working anymore. It throw an error message when we click on the work item.
    (connector): com.sap.mw.jco.JCOSE Exception:User MSSNO1 has No rfc authorization for function group SWK1
    Anyone know how to fix this?
    I am not too sure about the authorization part. Can someone guide me please?
    Thanks.
    Regards,
    Bryan.

    Hi Brain,
    Pls check this thread for solution
    Re: UWL and function group swk1
    Regards,
    Harini S

  • User PI_JCO_RFC has no RFC authorization for function group ERFC

    I am doing IDOC-File scenario between newly installed PI and ECC 6.0 systems.
    I have done all the configurations on XI and R/3 end.
    When I TEST to send an IDOC from WE19, I could do it successfully and the status is 03 in we02.
    But when I go and check SM58, I get the said error: User PI_JCO_RFC has no RFC authorization for function group ERFC.
    From that I understand RFC in R/3 end require some authorizations. Am I right? If so, what objects need to be added my user role?
    Please advise.
    Thanks
    Shiva

    Hi,
    Try to add the following authorization object to the role(s) of the RFC user:
    S_RFC
    Set the following authorizations:
    RFC_TYPE = FUGR (function group)
    RFC_NAME = <name of the function group containing the BAPI>
    ACTVT = 16 (execute)
    Regards
    Seshagiri

  • Has no RFC authorization for function group ZRFC_XI

    Hi All,
       I have a scenario where I am calling RFC inside the BPM.  When I execute I got the errror as
    User SKXXXXX has no RFC authorization for function group ZRFC_XI
    I have gone though the form
    no RFC authorization for function group RFC2
    User abcd has no RFC authorization for function group SYST
    and I understood that  we need to set authroization object S_RFC with RFC_TYPE = FUGR, RFC_NAME = SYST and ACTVT = 16. I think we need to set this to XIISUSER and the password and for PI7.0 user PIISUSER and its password
    But not able to understand where we need to do this activity.  I request you to kindly let me know how to assign this object... do we need to assign in SAP system or in XI system.  please help me out on this problem.
    Regards,
    Dhill

    Dhil,
    I never worked on these stuffs. But I found some useful stuff ,I think surely it will help u.
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/please-how-to-create-an-authorization-object-386391
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
    Best regards,
    raj.

  • User SIMPCDIA has no RFC authorization for function group BBPC

    Hello all, I am working with SRM 7.0 and when I try to list all account values in the corresponding matchcode, I have this error message:
    User SIMPCDIA has no RFC authorization for function group BBPC
    User SIMPCDIA is a dialog user created in backend system with authorization objetc S_RFC. I don´t know what is the problem...
    Can you help me please?
    Thanks in advance
    Rosa Rodríguez

    Try testing with a user that has the 'SAP_ALL' profile
    OR
    see if below link is helpful to you.
    [Probable Solution|http://www.sapkb.com/question.php?ID=10]
    Edited by: Saurabh Agarwal on Sep 1, 2010 11:59 AM

  • User SAAPOS has no RFC authorization for function group SYST

    Dear Experts ,
    I am facing this issue kindly help me to sort out this issue.
    User SAAPOS has no RFC authorization for function group SYST
    Thanks in advance
    Thanks & Regards,
    Srinivasan.V
    Moderator message: please search for available information and previous discussions.
    Edited by: Thomas Zloch on Sep 12, 2011 10:17 AM

    Hi,
    try SU53  to get more information about missing authority of user SAAPOS.
    Regards, Dieter

  • User CRYSTAL has no RFC authorization for function group BDL5

    I am getting this error. Can anybody help.
    T:40527 Error in program 'boe_cmsd': ======> User CRYSTAL has no RFC authorization for function group BDL5.
    T:40527 Error in program 'boe_cmsd': <* RfcReceive [3] : returns 3:RFC_SYS_EXCEPTION
    T:40527 Error in program 'boe_cmsd': <* RfcCallReceive [3] : returns 3:RFC_SYS_EXCEPTION

    Please post this query to the Business Objects Enterprise Administration forum:
    BI Platform
    That forum is monitored by qualified technicians and you will get a faster response there.
    Thank you for your understanding,
    Ludek
    Edited by: Ludek Uher on Sep 29, 2008 8:38 PM

  • User abcd has no RFC authorization for function group SYST

    hi,
       We are trying to http<>XI<>RFC scenario.
    When we are  sending request from http to xI.
    We got the followin response.
    <b>"User abcd has no RFC authorization for function group SYST"</b>
    Kindly let me know what authorization to be given to the user abcd.
    Regards,
    Nishita

    you need to give that user auth. object S_RFC for FUGR SYST and activity *.
    You can double check in transaction SU53 of the target system which check failed for the respective user. There it should show the auth. object mentioned above.
    Regards
    Christine

  • User SAPCPIC1 has no RFC authorization for function group SYST

    Hi,
    The id  SAPCPIC1is getting error "user  has no RFC authorization for function group SYST"
    Please guide.
    Regards,
    Visshwas

    Hi Visshwas,
    Look like user SAPCPIC1 does not have enough authorization,Assaign the same.
    Regards
    Ashok Dalai

Maybe you are looking for

  • Is is possible to validate a form in a workflow?

    I have  an .xdp form and .xml file with some data. Using renderPDFForm2 Operation I convert these two files into the pdf document. All this happans in a workflow/process, which is used by some external system. And after convertation a system receives

  • JMS and XML in PL/SQL

    I'm prototyping a JMS Listener / XML Parser in PL/SQL. I've not used either technology in conjunction with PL/SQL before, so I'm looking for resources to aid my research. Our current system is a Java Application that receives JMS messages off of a TI

  • Fix: Entrypoint error with newest ATi drivers on R200 series

    Hey, It seems that copying the libGL.so.1.2 from 8.24.8 works around this problem. I've taken out the middle man, and in the latest (ati-fglrx-utils-8.26.18-2) update to ati-fglrx-utils, I included it as /usr/lib/libGL.so.1.2.R200 If you are affected

  • Integration Directory - Server Connection interrupted

    Hi, after a system copy we have the following problem: If we start the "Integration Builder:Configuration" and want to view, create or change an object we lost the server connection. The error message in a popup is: "Connection Interrupted. Connectio

  • Why do we have to replace the top case to replace a keyboard?

    I see replacement keyboards sold all over the place online which means they must be able to com apart from the case. If this wasn't possible then why are these parts for sale and who are they intended for? People keep saying that you must replace the