No RFC Authorization for user

Hi
I am trying to develop a report, with screeen painter, using 4.6c version.
when i click on Layout editor , it doesnt show the screen from where I can drag and drop......and gives the message No RFC autorization for user.
I havent worked on 4.6c. do I need to be authrorized or 4.6c dont have this facility.....please help
thanking in advance
cheers
AJ

Hi,
  it might be that the network guys have blocked specific ports that the screen painter uses to connect your SAP GUI to the SAP. "Please contact your system administrator"!! BASIS and then network/firewall guys. Also, install latest SAP GUI and patch.
Reward please if helpful.
Regards,
George

Similar Messages

  • IDOC Scenario - User  has no RFC authorization for function group EDIN

    Hi all,
    I'm trying to configure an IDOC scenario from ECC to XI.
    RFC's, ports and destinations already configured. On WE19 I'm creating an IDOC for testing the scenario. The IDOC is sent successfully, and it stops on TRFC Monitor with error "User PIRFCUSER has no RFC authorization for function group EDIN." .
    Some of you knows what authorization is needed? Basis team said the roles are the same at DEV environment, and there this scenario works fine.
    Thanks for your help.
    regards.
    Roberti

    Hi,
    Check with PIRFCUSER user , that is having the right authorization or not ..
    And make sure that this user is present in the system & it should  not locked.
    to check that user is present or not-----goto su01 of the system & check
    Regards
    Seshagiri

  • I E ping error: User XIRWBUSER has no RFC authorization for ...

    Hi all,
    In the RWB->Component Monitoring when I select the
    "Integration Engine" it is giving ping error and Self-Test Status errors.
    Ping error: <b>User XIRWBUSER has no RFC authorization for function group CHECKRFCS</b>.
    Self-Test status: <b>JCo request failed</b>.
    Please help me, it is very urgent.
    Thanks in advance,
    Nagarjuna.

    Hi Nagarjuna,
    Please look at these..
    User abcd has no RFC authorization for function group SYST
    Delta Pull Fails with Short dump in R/3 - RFC_NO_AUTHORITY
    http://help.sap.com/saphelp_nw04/helpdata/en/4f/b541d812aea34695d54758cec0796f/frameset.htm
    cheers,
    Prashanth

  • User  has no RFC authorization for fun ction group EDIN

    Problem
    Posted: Aug 11, 2005 1:57 AM        Reply      E-mail this post 
    Hi all
    I am trying to send idocs from R/3 to R/3.
    In WE05 I can see STATUS 3 for the test IDOCS Iam sending through WE19.
    But in SM58 I am seeing the following error.
    User <username> has no RFC authorization for fun ction group EDIN .
    Could somebody suggest me a way to solve this problem.
    Thankyou

    I think you need to have S_TRANS_RFC authorisation.
    OR
    In the profile, you need to add the function group.
    Sorry I do not remember the profile name.
    Message was edited by: Vinod C

  • UWL  : User J2EE_ADMIN has no RFC authorization for function group SYST

    Dear All,
    When I am trying to register the system in universal Worklist Administration, It gives the following error,
    System <>: Fri Jul 11 18:58:11 IST 2008
    (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorExc  eption:Fri Jul 11 18:58:11 IST 2008
    (Connector) :com.sap.mw.jco.JCO$Exception:User J2EE_ADMIN has no RFC authorization for function group SYST.
       I have tried by giving the role SAP_ALL to J2EE_ADMIN , then also i am getting the same error. Can anybody  through some light on this....
    Helpful tips will be rewarded...
    Sanoj

    Sanoj,
    check these threads
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5489621
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5267551
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5636365
    reward points if helpful

  • QM-IDI : User QMIDI has no RFC authorization for function group QIRF

    Hi,
    I am in the process of trying to connect from Labware LIMS to SAP ECC 6, specifically the quality module. The aim is to use Labware to connect to SAP via the QM-IDI interface to
    1) Download inspection lots from SAP
    2) Upload usage decisions and inspection lot results to SAP.
    Initially I specified an account on SAP of the type 'Communications Data', however any time I tried to connect to SAP from LIMS via the interface with this account it gives an <i>'Incorrect Username/Password'</i> error in the trace logs. I then changed the account to a dialog user, which seems to be partially more successful, however the trace logs captures the following error 'User QMIDI has no RFC authorization for function group QIRF' when I try to connect from LIMS to SAP via the QM-IDI interface after changing the user to type dialog.
    I would appreciate any guidance on how to resolve this issue.
    Regards.

    i got stuck on configuring idi. plz guide me. bond_chaitu at yahoo dot com

  • UWL: User MSSNO1 has No rfc authorization for function group SWK1

    Dear all,
    We have just recently upgrade our support pack and the UWL in the portal is not working anymore. It throw an error message when we click on the work item.
    (connector): com.sap.mw.jco.JCOSE Exception:User MSSNO1 has No rfc authorization for function group SWK1
    Anyone know how to fix this?
    I am not too sure about the authorization part. Can someone guide me please?
    Thanks.
    Regards,
    Bryan.

    Hi Brain,
    Pls check this thread for solution
    Re: UWL and function group swk1
    Regards,
    Harini S

  • User PI_JCO_RFC has no RFC authorization for function group ERFC

    I am doing IDOC-File scenario between newly installed PI and ECC 6.0 systems.
    I have done all the configurations on XI and R/3 end.
    When I TEST to send an IDOC from WE19, I could do it successfully and the status is 03 in we02.
    But when I go and check SM58, I get the said error: User PI_JCO_RFC has no RFC authorization for function group ERFC.
    From that I understand RFC in R/3 end require some authorizations. Am I right? If so, what objects need to be added my user role?
    Please advise.
    Thanks
    Shiva

    Hi,
    Try to add the following authorization object to the role(s) of the RFC user:
    S_RFC
    Set the following authorizations:
    RFC_TYPE = FUGR (function group)
    RFC_NAME = <name of the function group containing the BAPI>
    ACTVT = 16 (execute)
    Regards
    Seshagiri

  • User SIMPCDIA has no RFC authorization for function group BBPC

    Hello all, I am working with SRM 7.0 and when I try to list all account values in the corresponding matchcode, I have this error message:
    User SIMPCDIA has no RFC authorization for function group BBPC
    User SIMPCDIA is a dialog user created in backend system with authorization objetc S_RFC. I don´t know what is the problem...
    Can you help me please?
    Thanks in advance
    Rosa Rodríguez

    Try testing with a user that has the 'SAP_ALL' profile
    OR
    see if below link is helpful to you.
    [Probable Solution|http://www.sapkb.com/question.php?ID=10]
    Edited by: Saurabh Agarwal on Sep 1, 2010 11:59 AM

  • User SAAPOS has no RFC authorization for function group SYST

    Dear Experts ,
    I am facing this issue kindly help me to sort out this issue.
    User SAAPOS has no RFC authorization for function group SYST
    Thanks in advance
    Thanks & Regards,
    Srinivasan.V
    Moderator message: please search for available information and previous discussions.
    Edited by: Thomas Zloch on Sep 12, 2011 10:17 AM

    Hi,
    try SU53  to get more information about missing authority of user SAAPOS.
    Regards, Dieter

  • User CRYSTAL has no RFC authorization for function group BDL5

    I am getting this error. Can anybody help.
    T:40527 Error in program 'boe_cmsd': ======> User CRYSTAL has no RFC authorization for function group BDL5.
    T:40527 Error in program 'boe_cmsd': <* RfcReceive [3] : returns 3:RFC_SYS_EXCEPTION
    T:40527 Error in program 'boe_cmsd': <* RfcCallReceive [3] : returns 3:RFC_SYS_EXCEPTION

    Please post this query to the Business Objects Enterprise Administration forum:
    BI Platform
    That forum is monitored by qualified technicians and you will get a faster response there.
    Thank you for your understanding,
    Ludek
    Edited by: Ludek Uher on Sep 29, 2008 8:38 PM

  • User abcd has no RFC authorization for function group SYST

    hi,
       We are trying to http<>XI<>RFC scenario.
    When we are  sending request from http to xI.
    We got the followin response.
    <b>"User abcd has no RFC authorization for function group SYST"</b>
    Kindly let me know what authorization to be given to the user abcd.
    Regards,
    Nishita

    you need to give that user auth. object S_RFC for FUGR SYST and activity *.
    You can double check in transaction SU53 of the target system which check failed for the respective user. There it should show the auth. object mentioned above.
    Regards
    Christine

  • User SAPCPIC1 has no RFC authorization for function group SYST

    Hi,
    The id  SAPCPIC1is getting error "user  has no RFC authorization for function group SYST"
    Please guide.
    Regards,
    Visshwas

    Hi Visshwas,
    Look like user SAPCPIC1 does not have enough authorization,Assaign the same.
    Regards
    Ashok Dalai

  • UWL:User  has no RFC authorization for function group SDIFRUNTIME .

    Hi,
    In portal, while registering the system in UWL , I am getting this error:
    (Connector) :com.sap.mw.jco.JCO$Exception:User <userid> has no RFC authorization for function group SDIFRUNTIME .
    I have given the permission to the user id as owner for the system, with which I am logged in, and registering the system.
    It is also confirmed, that in the backend, the same user has authorization for the said RFC.
    Please help as it is urgent.
    Thanks,
    Sonali
    Edited by: Sonali M S on May 30, 2008 6:32 AM

    Hi Sonali,
           If your component is a webdynpro component, back end system is accessed via a logical system / JCO Destination. User id ( Lets say JCOUSER) and password is given for accessing backend via this JCO connection. This user id is different from particular user's backend user id. Verify whether JCOUSER has required authorizations in backend.
         I hope it helps.
    Regards,
    Uday.

  • User has no RFC authorization for function group.

    Hi expert,
    I am calling a new function module  from the WebDynpro Java that is causing an issue that User has no RFC authorization for function group. if the user doesn’t have proper authorization like SE37 Transactions Code and others.
    But there is some more existing function module in the same application that is working fine without having above issues with same access.
    I am passing the USERID as input in the function Module and execute simply.
    So can you please tell me the Way to handle it?
    I will really appreciate your answer.
    Thanks
    Ali

    Hi Rali,
    I think,there is problem with ur JCO connection..
    Please check the following steps -
    1. Go to transaction SM59.
    2. Choose Create.
    3. Enter the following:
    RFC destination: SAPSLDAPI
    Connection type: T (Start an external program via TCP/IP).
    4. Choose Enter.
    5. Choose Technical settings and specify the following data:
    a. Select Registered Server Program as the activation type.
    b. Enter the program ID of the SAP J2EE Engine that acts as the RFC server. Enter SAPSLD_xyz (xyz is the SID of SAP J2EE Engine Server.)
    c. Enter the gateway host and the gateway service of R/3 server
    d. If the system is a Unicode system, navigate to Special Options and select the option
    Non-Unicode or Unicode in the section Character Width in Target System according to the gateway
    server.
    6. Save your entries.
    Now
    1. Go transaction SLDAPICUST.
    2. Switch to editing mode and choose Insert Row. Specify the connection parameters of the J2ee server ,
    Host name,  port Number, user  and password -  and set this SLD server as Primary.
    Only the entry marked as Primary is active.
    Please check whether there is entryof r/3 server in  the j2ee server /etc/services folder.If no entry is there then add -
    R/3server   port/TCP
    in the service file.
    Please check the  r/3server service folder and host folder  - do they have entry of java server, if no add the entry in the same way as done above for j2ee server.
    Also check the Group ,that u have entered for r/3 server in SLD exist in R/3 server or not if not add it....
    I hope this will help you ...
    xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    Thanks,
    Gunja
    Edited by: Armin Reichert on Apr 26, 2008 6:35 PM

Maybe you are looking for

  • When using the lasso tools, how do i disengage from it, in order to adjust it?

    When i am in the process of creating a selection, with the lasso tools, I would like to disengage from the tool, briefly to adjust my selection and then to return and continue to make the selection.  If i press the space bar, it does disengage; but t

  • No dead keys in Qt applications

    Hallo everyone. I use KDE 4.7.4-1 (latest stable) and have enabled two keyboard layouts, English US international with dead keys and Greek polytonic. Dead keys work perfectly in Greek in all applications, but not in English in Qt applications. For ex

  • How do I get appointments on iCalendar to not reset time zones overnight?

    Appointments (Events) on iCalendar are being reset to a different time zone overnight- on my iPad!  My MacBook, iPad, iCloud, Gmail and Work are all setup for MST.  When I create an appointment/event on my iPad, iCalendar selects MST correctly.  Over

  • Unexpected Alpha channel behavior in Premiere

    Is there no way to interpret alphas as straight versus premultiplied in Premiere?  Why do my transparent layers and clips with alpha channels display differently with a Black Video layer below them? Background info: I'm exporting my film to files wit

  • Restored Iphone as an Ipod, Facetime only works for 1 contact

    Following the links provided here, I restored my old 4s through Itunes connection on computer.  Everything is reset.  Imessage and Facetime says waiting for activation.  But I am able to facetime with one contact??  I have followed many steps listed