No RFC destination is maintained for the port 'SAPERP'
Hi!
I am facing with a very strange thing.
I am implementing a File_to_IDOC scenario.
Therefore I created in XI system the appropriate Ports in tcode IDX1.
I use one business system with two clients (SAPERB100 and SAPERB200).
I defined there of course the appropriate RFC connections (RFC_IDOCERB100 and RFC_IDOCERB200).
Unfortunately when I go into tcode IDX2 and try to load metadata I get the following error:
No RFC destination is maintained for the port 'SAPERP'
Message no. IDOC_METADATA455
Diagnosis
No RFC destination has been maintained for logging on to this system for the port SAPERP.
This means that no structure information can be provided for this port.
Procedure
Maintain the required RFC destination for this port.
Can some one help me to solve this problem?
Thank you very much!
regards
Holger
HI Holger
You need to have a RFC destination created for XI server type 3 (ABAP) to push IDOC from ECC. Similarly you need RFC destination in XI towards ECC to load IDOC / RFC metadata.
Thanks
Gaurav
Similar Messages
-
Why do we need to define RFC destination and user for material replication
Dear Experts,
why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
regards,
RanjanHello,
As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
You can refer to note 720819.
Regards,
Ricardo -
No RFC destination is defined for SAP Global Trade Services
Hi Team,
I am getting error No RFC destination is defined for SAP Global Trade Services while transferring master data from one ECC Client to GTS.
Both clients has built in GTS. The situation is like this.... Client A which has ECC & GTS and Client B also has ECC and GTS. Client B we are intended
to use only for GTS. This is basically for proto type purpose we need to establish connectivity between A and B. B we intended to use as a feeder system
1) All the three BADI'sin SD0A,SD0B and SD0C level activated
SLL_PI_SD0A_TRANSFER
SLL_PI_SD0B_TRANSFER
SLL_PI_SD0C_TRANSFER
2) /SAPSLL/RFC_DEST Badi also active
I asked BASIS people to check in SM59 Client A is connected with Client B (here Client B as RFC destination) even connection test / remote logon also
tested and it is working between A an B
Where i am missing
Regards,
RamjiHi Dave,
Thanks for your reply.Sorry i forgot to include in my points already done.
BD97
BD64
Just to clarify one more point
sender should be EH6CLNT800 (ECC)
Receipient should be EICCLNT800 (GTS). Is it correct
Regards,
Ramji -
No properties can be maintained for the selected node (MTE)
Hi!
I would like to set up the user defined alerts, e.g. Shortdumps frequency for satellite system from SOLMAN.
The access of the MTE on the satellite system goes without any problem
(<SID>\...\R3 Abap\Shortdumps frequency)
When I set up this alert via System Monitoring and try to access it by double clicking I get the following error: No properties can be maintained for the selected node (MTE).
Has some one some ideas how to solve this problem?
Any helpful information will be appreciated.
regards
ThomHi,
Please ensure you have enough(like S_RFCACL) authoraization in both Solman and Your satellite system
Check here [Solution Monitoring - Regarding MTE|Solution Monitoring - Regarding MTE]
Thanks,
Jansi -
Assessable value not maintained for the material X
Dear all,
i have maintained material chapter ID,Plant and materialchapter id combination ,assessable value , cenvat determination, and vendor excise details in the transaction J1ID .
Even after maintaining all these conditions , i am not able to save the po,while saving the po i got a error message that assessable value not maintained for the material X..
Points will be rewarded for useful suggestions.
Thanks in Advance.
velu+91-9789991357Hi,
Search using approriate keywords in SDN, u get most of the details, i have now done the same searched and have pasted below .
Try ME2N.
Click on the "dynamic selections" icon and add the release indicator as an additional selection. Enter the release indicators that you class as "awaiting approval" and you will then have your list.
The ME2* series of transactions are not that much use prior to 4.7, the layout is poor. But if you have 4.7 or later you can get the screen to use the ALV format and this transforms the ME2* (i.e. ME2L, ME2M, ME2N etc.) transactions into VERY useful reports. -
Calculate teh tax maintained for the PO line items
I need to calculate teh tax maintained for the PO line items...how do i do it????
can somebody help??
kanishakHi,
Use this FM to get data from KOMP
tax amount = komp-mwsbp
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
EXPORTING
comm_head_i = komk
comm_item_i = komp
language = nast-spras
IMPORTING
comm_head_e = komk
comm_item_e = komp
TABLES
tkomv = tkomv
tkomvd = tkomvd.
Regards
Krishna -
How does vendor determine if no info record is maintained for the material
how does vendor determine if no info record is maintained for the material
Hi
If you have to determine a vendor, the minimum requirement is Info record. Beyond that, you can ofcourse maintain Source Lists, Quota Arrangements but Info record is bare minimum for automatic determination of vendor.
Otherwise, you have to maintain the vendor manually in th Purchasing docs.
Tcodes for Info record are ME11, ME12, and ME13.
Hope this clarifies.
Thanks -
No Web server maintained for the presentation of log. system
Hi Banu/All,
I got the following error message while executing jump target to R/3 Transaction ME2N.
<i>Messages:
No Web server maintained for the presentation of log. system DDVR3110
Jump target cannot be executed
An error occurred with the report to report interface during the jump</i>
Banu, I have gone through the following link which u have given in the previous queries, but can u please tell me how to install ITS for the target system? or how to know/whom to ask regarding the ITS installation? is it BASIS People?
http://help.sap.com/saphelp_nw04/helpdata/en/61/b8c63ce4b79679e10000000a114084/content.htm
Apart from ITS, what other settings have to be done in this kind of scenarios?
Can U please eloborate on this topic, please?
Thanks & Regards...
Ganesh
Message was edited by:
GaneshHello Ganesh,
Did you have the chance to solve it?.
I have the same issue.
Thanks in advance.
Facundo Romero. -
Query jump: No Web server maintained for the presentation of log. system
Hello,
I have created a query jump in the RSBBS transaction to go in R/3 through a Bex Query. When i choose the jump in the query anayzer I have the error message:
<b>No Web server maintained for the presentation of log. system.</b>
Do you have ever had this message? what is the solution? why do my bex anayzer use a web interface to connect in R/3?
Thanks a lot!
JulienHi Arun,
Yes, the AIE 300 SYSTEM is R/3 system. If you think this could be a basis problem please let me know and if you can a step by step solution or something to bring to the basis.
Thanks,
Diego -
No nutrient listing maintained for the nutrient group
Hi Team
I have maintained the nutrients in the nutrient group. I have given the area, UOM. I can find the nutrient group in the drop down while chaning the recipe. But once i select the nutrient gorup i get the warning message "No nutrient listing maintained for the nutrient group." I am not able to understand what's wrong. This error i am facning in PLM web UI not in ECCDear,
Planning file enteries in OMDO for every plant then system will atomatically update the planning file for every material that have valid MRP data.
If MRP is active for the plant and you have maintained the MRP views then planninf file enteris will be automatically made by the system when there is change relavant to MRP.
Check table MDVM to see whether there is an entry created after executing transaction MD20?
You can also run program RMMDVM20 to create planning entries.
MDAB : Set up planning file entry in background
MDRE : Check planning file entry
Can you check the MRP type for the material in material master (MM02)?
Please check and come back.
Regards,
R.Brahmankar -
RFUMSV25 - deferred tax- error FR472 - No target maintained for the tax on
Hi gurus!
When I run RFUMSV25 for Transfer postings for deferred tax I get this error:
Message no. FR472
No target maintained for the tax on sales/purchases code selected
I have trouble solving this, cause this error doesn't occure in our testing enviroment but only in production.
Thanks!
MarinaHi Marina,
As you might be knowing, the report RFUMSV25 is run for transfer posting from the main tax code to a deferred tax code. As the name suggests, you have to maintain a target tax code for each main tax code.
Hence, in tcode FTXP, create a deferred tax code. Say for V1 you can maintain a deferred tax code X1.
Then go the main tax code, say in our example V1
Click on the properties tab, and assign the deferred tax code X1 in the 'Target tax code' field.
Regards,
Mike -
T-Code J1INCERT:Acknowledgement number is not maintained for the quarter
Hi Gurus
While executing the T-Code J1INCERT, the system throws the following error:
Acknowledgement number is not maintained for the quarter
Message no. J1IN016
But we have maintained the Acknowledgement number in Table: J_1IEWT_ACKN,
Please throw some lights on it.Hi....
You have to update to this table : J_1IEWT_ACKN_NUM or J_1IEWT_ACKN_N at quater level (Q1,Q2,Q3) ,after that you have maintain the number ranges based on the Object name : J_1ICERT,J_1ICHLNNO, in SNRO t.code
I hope will get solution...
Regards
vamsi -
Acknowledgement number is not maintained for the quarter
Dear All,
At the time of TDS certification using T code -- J1INCERT
we are facing error massage *Acknowledgement number is not maintained for the quarter*
Message no. J1IN016
please help me to resolve.
Thanks
juhisDear All,
Thanks
I have maintain same as those maintain in answer but still we are facing same error
I want one clear fictions about the number range we have multiple section code how we maintain number range currently we have maintain just like exam---
J_1IEWT_ACKN_N,J_1IEWT_ACKN
Client Company Code Fiscal Year Section Code Period Ackn Number
000 000 2011 13 Q1 001
000 000 2011 13 Q2 001
000 000 2011 13 Q3 001
000 000 2011 13 Q4 001
Same as for current fiscal year
000 000 2012 13 Q1 001
000 000 2012 13 Q2 001
000 000 2012 13 Q3 001
000 000 2012 13 Q4 001
Same as for Next fiscal year
000 000 2013 13 Q1 001
000 000 2013 13 Q2 001
000 000 2013 13 Q3 001
000 000 2013 13 Q4 001
Just like all the Section code (around 25) we have maintain but we give the same number range it correct or we have deferent number range for Q1,Q2,Q3,Q4
Please suggest me
Thanks & Regards,
juhi -
Acknowledgement number is not maintained for the quarter TDS Certificat
Hi Gurus,
I have implemented note 1486147 for TDS certificate.
but on running tcode: J1INCERT i am gettign the following error that : Acknowledgement number is not maintained for the quarter
It is the same message whihc is maintained in class which was mentioned in the note.
plz advice what can be done...plz suggest
thanks,
kushagrathanks for prompt response.
I have checked the given note but the program is throwing error before this point.
it is checking the following code lines and then throwing error
READ TABLE ackntab WITH KEY secco = wa_secco_or_bupla
period = wa_period.
IF sy-subrc = 0.
qrtrtab-qrtr = wa_period+1(1).
qrtrtab-acknnumber = ackntab-ackn_number.
MODIFY qrtrtab.
ELSE.
MESSAGE E016(J1IN).
ENDIF.
plz suggest what to do... -
Rfc enabled function module for the updating the database table
Hi,
I need one rfc enabled function module for the updating the database table from the legacy system.currently i am using the rfc_read_table to read the database table.similarly i need for the update.Hi
I believe you need to create one by yourself
Max
Maybe you are looking for
-
Error when approving the request in OIM 11g R2
I have a catalog item for iPlanet User resource setup to go for beneficiary manager approval. On the approval window, when the manager approves the request, OIM tries to forward to the url /identity/face which throws an generic error saying "identity
-
Handling fault messages in an Integration Process (bpm)
I have a bpm in PI 7.11 which performs a synch call to an external webservice. In addition to the request/response, that webservice can also generate two faults: ObjectNotFoundFault and generalfault. I am having trouble handling these faults - when
-
My computer will only let me backup 5 versions of my iPhone on iTunes?
I recently somehow lost a years worth of backups on my computer, just disappeared. Now more recently It will only allow me to backup 5 files total. Erasing and overwriting my 5th every time. I have more than enough space. I don't know what the proble
-
COMPONENT MONITORING in the RWB is not working /throwing error
HI I ve recently installed a new PI 7.0 SP 18 , but my COMPONENT MONITORING in the RWB is not working , as i click on COMPONENT MONITORING it throws an error : java.lang.NoClassDefFoundError: com/sap/aii/rwb/exceptions/HttpException , pl help thanks
-
NDS-Tree not visible in networkenvironment
After installion of e-directory and i-manager the nds-trees is not visible in networkenvironment. I try the installation of e-directory without slp and with slp-multicast. We have running a netware 5.0 server in the same subnet. The access with i-man