No RFC links could be found

Hi,
In CRM, T.Code: /BEA/CRMB11, give Billing Document no. & execute, in the "Transaction His" tab, select the billing document line item & click on the button-Display Accounting Documents, it shows the below message:
No RFC links could be found
In the "General" Tab in the same t.code, "Billing Status" field is showing here as "C Transferred".
Backend is ECC 6.0.
Pls help.
rgds,
balu

closed no replies

Similar Messages

No RFC connection could be found in SLG1.

Hi Experts,
I'm Trying to send the contracts (GOA) from SRM to R/3. I create the RFC port and the Idoc as sourcing configuration guide ( WE21, WE42, WE20) but doestn work. When the contract was realeased it show up the message error in SLG1.
The message error is ''No RFC connection could be found''.
The RFC was create too..with this RFC I make all replications by middleware. Is there other point to activate for this?
thanks,
Gustavo

Hi Paulo,
The message types was defined as configuration guide for only inbound in R/3. In the configuration guide I found only informations about receive the idocs in R/3 (inbound). For inbound messages in R/3 system I defined BLAORD and COND_A, I tru to define teh same message types in outbound parametes in SRM,but the messages BLAORD e COND_A doesnt exists in SRM. Is there any documentation to make this?
I was see the note too 641919
Thanks,
Gustavo
Bom dia, Paulo!
Tudo bem?
Foi definido os tipos de mensagem de entrada BLAORD e COND_A no R/3 no tipo de parceiro do SRM. No configuration guide não faz menção na definição das mensagens de saida (outbound) no SRM, encontrei somente a configuração enviando o contrato do R/3 para o SRM. O que eu preciso e enviar do SRM para o R/3. Tentei definir os mesmo parametros de entrada no R/3 na saida no SRM, porem o tipo de mensagem BLAORD e COND_A não existe. Se você tiver alguma documentação sobre isso eu agradeço.
Obrigado,
Gustavo

/BEA/CRMB11 No acntng No RFC links

Hi,
In CRM, T.Code: /BEA/CRMB11, give Billing Document no. & execute, in the "Transaction His" tab, select the billing document line item & click on the button-Display Accounting Documents, it shows the below message:
No RFC links could be found
In the "General" Tab in the same t.code, "Billing Status" field is showing here as "C Transferred".
Backend is ECC 6.0.
Pls share your experience...
thanks in advance
Regards,
Balaji

Hi Mr. Bala,
I hope the SPRO configuration activates should be done from Functional Consultants.
Txs,
Lokesh.

Error in Broadcaster - An Active RFC Server could not be found

Hi all,
I am trying to broadcast a workbook to my mailbox through Information Broadcasting, i am trying this in BI 7.0 system. In the Broadcasting wizard, I gave my mailid & the other required credentials. But when i click on Schedule, i am getting a Error message "An Active RFC Server could not be found. Error occured during processing of framework class CL_RSRD_PRODUCER_EXCEL, type PROD".
I checked in SU01 & my mailid is already added there. So, where am i missing or is there any settings need to be done for the Broadcaster to work?
Thanks,
Murali

The precalc server is not needed if you are generating html output, but certainly is mandatory for the Broiacaster to run/distribute BEx Excel Workbooks.
The BW needs access to a Windows computer that has Excel on it. The BW connects to the Precacl and sends it a request it run a BEx wkbk, which the BW then can email to users.
The precalc server is a Windows Service. You can install it locally on your desktop, or it can be installed on a windows server. There is a little config that needs to be done. The How To Troubleshoot Information Broadcasting link in the other resposne will provide all the steps. You should obtain the most current version of the software from SAP.
You'll need a precalc server for each BW system in your landscape that you want to broadcast BEx wkbks from, so if you have Dev and QA systems, you'll need precalcs for them as well.

Broadcasting Workbook Error | An active RFC server could not be found

Hi All,
I am facing an issue while trying to broadcast(distribute) a workbook. The broadcasting of a query from the query designer works fine. But when I try to distribute a workbook, it throws up the following error. We have used the SMTP method(Using SMTP plug-in) for broadcasting and we know that we can use RFC(Using RFC connection) too. But my question is whether RFC method is a must for workbook distribution.Kindly help me.
Thanking you,
Best Regards,
Manesh
The Error Log
Processing for user PUSHM, language EN
Processing setting
An active RFC server could not be found
Error occurred during processing of framework class CL_RSRD_PRODUCER_EXCEL, type PROD
Processing setting !TEMP_2CC00BE0E24C704991039F6E9C2AC4E4 completed with errors
Job step for user PUSHM, language EN ended with errors


Hi,
Are you using BI 7 ?
Have you configured a Precalculation server in transaction RSPRECADMIN ?
Precalculation servers are basically PC, that are used for their Excel capabilities, in order to produce up-to-date workbooks.
Best regards,
Guillaume
Message was edited by:
Guillaume GARCIA

I not able to open any links in the emails I receive and get an "Error: No associated application could be found" when I click on it. HELP!! What's going on? This happened after I downloaded Chrome and then

I not able to open any links in the emails I receive and get an "Error: No associated application could be found" when I click on a link. HELP!! What's going on? This happened after I downloaded Chrome and then decided to delete it.

I have Lion and I just came across this link and it took care of the problem.
Jose Antonio Solis
Re: Lion: Delete google chrome completely include user profile?
Try deleting:
~Library/Application Support/Google
and
~Library/Caches/Google/Chrome

TS4002 I'm getting an error message when I try the click on a link in an email. No associated application could be found. How do I fix this problem?

I'm getting an error message when I try the click on a link in an email. No associated application could be found. How do I fix this problem?

Is this a one-off or a general problem? If a one-off, is it a link to a web page or something else? If not a web page, try control-clicking on it and choosing to download the linked file. This will at least access the file though it might be to something you don't have an application to open with. If you do this, what sort of file do you get? - select it and hit command-i to get information on it.

All my mail links come up with "No associated application could be found". What should I do?

All the links on my emails come up with the error message: "No associated application could be found". Can anyone advise how to fix this? Thanks

Hi...
Quit your mail app.
Open Safari. From the menu bar click Safari > Preferences then select the General tab.
Click the pop up menu next to: Default web browser
Select the browser you want to use to open links.
Open mail and try a link.

Having trouble trying to open links on my recieved mail. The only response I get when I click on the link is, "No associated application could be found".

Having trouble trying to open links on my recieved mail. The only response I get when I click on the link is, "No associated application could be found".
How can I correct this problem?

What type of file is it? What is the extension (the 3 letters after the . (DOT)) of the file?
Could be it is a Windows Exe file and simply will not run on a Mac. Which is good because anyone that would send you a excute (.EXE) file is up to no good. just my opinion.

RFC destination Could not be SPecified for Logical System

Hello there
i am traying to costomize Transaction Luancher for some of the report which is been devloped in ECC (wich is ARD 100)
when on Transaction launcher Wizard--> techincal
i am having a logical system as ARD100(my r.3 system where report is devloped and which is connected to CRM )
while chosing the OBJ.TYpe :   and Method:
it says shows three erroe :
1) RFC destination could not be specified for the logical system ARD100
2) Object type and Method is not available
i have checked RFC , in SM59 entriesu2026u2026 There is an RFC named ARD100 and the connection test works. I also did an authorization test and it also works. I also checked to make sure the logical system name ARD100 exists
could you please help me to resolved the same
Regards
Rajiv

Hi Rajeev,
In a system landscape it's important and necessary to use the logical system names consistently throughout all systems!
Therefore please make sure, that you always use the same name for a logical system in all systems (CRM and R/3 systems).
The following steps are required before a RFC call is made from the CRM system to the R/3 system :
    o Use transaction SM59 to create an RFC destinations for the remote
       system.
    o Use transaction BD54 to create the logical system.
    o Use transaction BD97 to link the RFC destination created in SM59
       with the logical system created in BD54.
I hope this helps.
Best Regards
Gavin

TS3276 "ERROR" message "No associated application could be found"

When opening incoming emails on my Mac with links to other websites or for more information, etc. clicking on these links I receive "ERROR" message reading: "No associated application could be found".
I do not have this problem with the same messages on my Ipad.
My email is handled through Yahoo (ATT) and they have not been helpful.
Thanks

Open Safari. From the Safari menu bar click Safari > Preferences then select the General tab.
Select Safari from the pop up menu next to: Default web browser
If that doesn't help, launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk Permissions
Restart your Mac when it's finished.
Try Mail.
messaged edited by: cs

The process HOTFIX.exe has initiated the restart of computer "Computer_Name" on behalf of user NT AUTHORITY\SYSTEM for the following reason: No title for this reason could be found Reason Code: 0x2

I've had 5 machines the past two days, that have randomly restarted in the morning. All of my GPO's are configured to prevent reboots from Windows Updates. All 5 machines have up to date Anti-Virus, have ran a combofix with nothing found, and
have been forcefully rebooted at least once (most twice). I'm hoping to find the root cause, so I can prevent it from occurring on any other machines in our environment.
Also, sometimes on the seconds reboot the users see a:
The description for Event ID 1074 from source USER32 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
HOTFIX.exe
%Computer_Name%
No title for this reason could be found
0x2
restart
NT AUTHORITY\SYSTEM
The handle is invalid

Hi,
The Event ID 1074 from source USER32 is used to record a system shutdown or restart in order for the administrators of that system to have a better understanding on how often and for what reasons the computer is shutdown or restarted. The event contains
details about the process (the program) that performed this task, the computer that was affected and when applicable, the reason for the restart or shutdown.
The process known as Hotfix Installer belongs to software Microsoft SQL Setup or SQL HotFix Installer Engine by Microsoft.
Description: The file hotfix.exe is located in a subfolder of C:\. The file size on Windows 7/XP is 2,539,872 bytes.
The program has no visible window. Hotfix.exe is certified by a trustworthy company. Hotfix.exe is not a Windows core file. Hotfix.exe is able to monitor applications. Therefore the technical security rating is 36% dangerous.If hotfix.exe is located in a subfolder
of "C:\Documents and Settings", the security rating is 60% dangerous. The file size is 895,488 bytes (50% of all occurrences) or 564,736 bytes. There is no file information. The program has no visible window. It is not a Windows system file. Hotfix.exe is
able to record inputs and monitor
applications.
Also, I would like to suggest you refer to the link below to trace Windows 7 boot/shutdown/hibernate/standby/resume issues.
Trace Windows 7 boot/shutdown/hibernate/standby/resume issues:
http://www.msfn.org/board/topic/140247-trace-windows-7-bootshutdownhibernatestandbyresume-issues/
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy the information.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Error msg-Adaptive RFC reimport could lead to inconsistency of R/3 metadata

Hi Experts,
I am trying to reimport the model for Webdynpro application.
I wanted to include more BAPIs to the existing model.
When i am trying to do that I get pop up, with following message;
"Adaptive RFC reimport could lead to inconsistency of R/3 metadata cached on J2ee server.
Thus it is recommended to invalidate the cache this could be done either by re starting the J2EE server or by using adaptive RFC metadata cache invalidatation tool within webdynpro Console"
Could anyone one help me in resolving this?
Thanks and regards,
Pradnya

Hi,
When you reimport an RFC/BAPI the metadata which is stored in the cache is not cleared. So it still refers to the old RFC/BAPI metadata. We need to clear this. This can be done by either restarting the server or webdynpro console.
For Clearing through webdynpro console the version should be NW04 or 6.40 SP21 Onwards 2. NW04S or 7.0 SP12 Onwards
Check this link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10465350-b4f5-2910-61ba-a58282b3b6df
Thanks,
Gopi

In Mail I am getting an Error message.....No Associated Application could be found.

I cannot use links in mail and I get an Error Message telling me.....No Associated Application could be found,
Any ideas??
Thanks
Imac OSX 10.6.8

Some ideas.
https://discussions.apple.com/message/22213139#22213139

TS3276 Imac with Mountain Lion can receive mail but when to access it it says -no associated application could be found

Try to open mail message shows-no associated application could be found.

Looking around, you seem to be all over the place on this.
Try resetting Launch Services:
See here: http://macs.about.com/od/usingyourmac/qt/remove-duplicate-applications-from-open -with.htm
There is both command line instructions and links to GUI-based programs you could use.

No RFC links could be found

Similar Messages

Maybe you are looking for